Any LabVIEW 2009 Front Panel Gage displayed as circle deg continues 360?

Similar Questions

• LabVIEW 2011/Front Panel diagram responds slowly

  Today, the block diagram and the front of my application (using LabVIEW 11.0) became very slow. Any changes (add, move him, scroll etc.) takes more than one second. Restart LabVIEW helps for awhile, and then it becomes slow. Restart the PC did not help either.

  So, I tried to delete all items added today, but the effect remains the same. When I try to close the Project Explorer LabVIEW reacts more (not answer). Very annoying.

  I also tried to change the settings of the graphics card: nope.

  What should I do? Start the project?

  All suggestions except do not use LabVIEW for new projects?

  Would be appreciated.

  Ben

  
  

• How to set the default value for the digital control on front panel?

  How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

  I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

  I would not be able to specify a default value of zero for these entries?

  Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

• display of a front panel without labview

  I have a cRIO-9073 that I use to control an oven. Everything works on my development machine, but when I open a browser on the computer that will be used in the oven, I can't front panel appears. All I get is the border and title blocks. The guy here who also LV said he used the performance Viewer? I can't find anything like that. What Miss me? I have attached the screen shot of what I speak.

  Thank you

  Seth

  The computer in the oven must LabVIEW or LabVIEW Run time engine. There was not a "Viewer" for many years.

  The image looks that you have either the Web server is running, or if this is the case, ActiveX was blocked.

  Take a look at aid to the publication on the web, or watch here

• Reminders does not work in the executable LabVIEW front panel

  I have a couple of reminders in the process template that trigger an event in the event structure to update of the lights on the front panel for the user. Everything works fine until I have create an executable file. This can also be an indication of the other points, I have not discovered yet.

  Any ideas?

  Thanks for all the help.

  Found!

  Not unlike most of LabVIEW developers, I have a range of utility screws that I use over and over again. Such vi is vi uses a property node to find out what environment the application is running in, i.e. .llb, exe, development, publishing student, etc.. This vi is used because SEO screws in an executable file have a way different than when their listing in the development environment. Using this vi allows your code to reference the screws properly when developing and when the executable is built. The code still works because it automatically adjusts the referenced path of the vi. See attachment 'Path Finder.vi environment'.

  Now for the fun part! For some reason, perhaps because of the friendly character of NOR and the relationship it is with its developers :-), AND decided to change the path of the executables in LabVIEW 2009. After hours of troubleshooting and countless rebuilt, I came to the conclusion that the ' paths of the band of "work magically stopped working. It was at this time one of my friends happened to walk and ask why I had everything in my monitor across the room (figuratively speaking of course, I'm sure we've all been there). I explained what could be the only conclusion, band paths do not work!

  My friend immediately began laughing, having recently had the same problem. He explained that in LabVIEW 2009 executable paths are different and our 'find the path vi' would not work. He added that NOR, after finding this funny, however gave the developers a way to solve this problem with a check box within the app Builder. The box is called "Layout using LabVIEW 8.x file." See attached photo named "App Builder."

  The only thing I could say to my friend was, ' silly me, I should have know what that.»

  Laughing out loud

  Thank you for trying to help, it launched my butt.

• Tap the Navigation Palette missing in LabVIEW 2009 Panel

  Hello

  I developed an application using LabVIEW 8.6 with the touch panel module and a TPC-2012 (Windows CE). I've now upgraded to LabVIEW 2009 and I'm trying to run my code in a TPC-2512 (XP Embedded), but the 'Touch Panel Navigation Palette' I used previously to be found in the new facility. In my view, there is a new range of "Navigation controls" in 2009, but I would like to avoid having to re - design my app with new controls.

  8.6 navigation controls are no longer supported in LabVIEW 2009 or have I missed something? The TPC is displayed in the Project Explorer and MAX, and I'm able to deploy and run applications on it. But the old vi navigation do not work and as I mentioned before, the palette is not even appear when you try to change the vi on the development computer.

  Any help would be appreciated.

  Thank you

  Hello

  The navigation screw touch panel are not displayed to the top, because you are currently using the TPC-2512. If you take a look in the Help file on the Navigation, it states: 'installed with: Touch Panel Module.» This topic can not match its corresponding palette in LabVIEW depending on your operating system, or the licensed products and the target. "I checked this with both LabVIEW 8.6 and LabVIEW 2009 targets. Due to the different architectures, you get a different set of palette (Windows CE vs XP Embedded).

  -Zach

• Security of 2014 LabView front panel

  Hello.

  I am looking for web and this forum without success. Where is the Front Panel security in labview 2014. The Web for LabView 2011. Tools--> Security--> security on the front panel.

  I want to disable change a variable for some users. I create user... but do not have this option to FrontPanelSecurity.

  Can you help me... where can I find this Panel on labview 2014?

  The link you posted is for SDC. You can buy this and he license for LabVIEW, because it's an add-on.

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209851

• LabVIEW version of the source code of the NOR-DCPower Soft Front Panel

  I work with an SMU NI PXI-4130. There is a front panel soft exe called the "NOR-DCPower Soft Front Panel" that can be used to control the instrument. I was wondering if there is a version of LabVIEW source code for this driver?

  Jim,

  as much as I know there is no LV source code provided for the Soft Front Panel. But there are a few examples of LV, which will be close to the characteristics of the SFP. So I suggest to you to dig in the examples you find in the Finder of the example.

  Input and output hardware > Modular Instruments > NI-DCPower.

  hope this helps,

  Norbert

• Remote panels and LabVIEW 2009

  Hello

  I updated my application PXI time real LabVIEW 2009 (Pro) and I'm now trying to connect with planels remote.  I can only have a remote panel open.  The other gives me the "connecting remote panels exceeds maximum number of licenses" the problem has not been captured in LabVIEW 8.5 and I have the remote license (unlimited) panel is activated in the License Manager.

  How this can be solved?

  Kind regards

  Patrick

  Hello

  The problem is now resolved.  This is a problem now at NEITHER and they had to send me a new license file I had to transfer on PXI.

  Kind regards

• generic error, error code Labview support 3: could not load front panel

  I worked on several vi. Once I had to reboot the system and then only the screw does not work.

  I searched through discussion forums, but I'm not able to do anything.

  I here enclose the VI that displays an error like

  Generic error.

  LabVIEW support 3 error code: could not load façade.

  I am now using Labview 2009, 32-bit.

  I have attached the error dialog and also the program.

  I'd be happy if someone could help me with that.

  I installed f3 patch and the problem is solved.

  Thank you for the help so far

• Front Panel does not (exactly 2 even while in flat sequence loop)? LabVIEW BUG?

  Hello world

  I have two while loop with exactly the same code and a user in each loop event structure,

  They both make the same thing which is too run until IMAQ image control (one line) click on a recording.

  I used a flat sequence to manage the order of execution.

  The problem is when I use only one single loop (put another in a diagram to disable) the façade answer perfectly and the program does what it should, but when I activate the two loops stuck in case of timeout...

  I do not understand what is happening that I can't do any activity of façade that would be registered, enclosed is a copy of the VI (you need NIVision run the vi).

  Any idea? Is this a bug or did I do something wrong?

  Thank you very much

  Best regards

  This isn't a bug, but the expected behavior. You cannot sequence structures event like this, they both need to be ready to react. Use a single event structure and a state machine architecture. You have about 4 copies of basically the same code of event management. Try to combine everything in one!

  What happens in your case?

  Answer: The two structures event will begin immediately queues of events, but the second event structure cannot respond to them because it is inaccessible due to data flow. In addition, the second structure of the event is set to "lock the front panel until the end of the event. Given that the event cannot end as explained above, the façade is locked up forever.

• Front panel display

  Sony DAV-DX250 front panel display will display interval short white aster. Click on the display board lens returns to the digital display for another short interval. Dad unit not overheated and has not been abandoned.

  Suggestions?

  Hello Truman,

  Try to reset the DVD Home Theater system and see if it helps.
  In order to reset,
  Unplug the power cord of unity HTS of the socket for a minute.
  Plug it directly to a power outlet and switch on the device.

  If the front panel display does not always illuminate upwards, perform a cold reset, which returns the system parameters, such as the speaker settings and preset stations, factory settings.
  To reset the cold,
  Press the POWER button on the front panel of the unit to turn it on.
  After this, press the button STOP, EJECT and POWER on the system at the same time.
  If the front panel displays works, then, "COLD RESET" will appear on it.

  If the problem is still not resolved, it may be necessary to return the unit for service. Use the following link for a repair facility for your HTS

  https://eService.Sony.com/

  If my post answered your question, please mark it as an "accepted Solution".
  Thank you for your message.

• Is it possible to call a .exe (non-LabVIEW, such as Notepad) in a child windown on the front panel?

  I would like to launch a stand-alone .exe inside the front of my VI.  It is a piece of software by the provider of a sensor that I try to incorporate in my VI.  I was able to find how to call the .exe using the .NET constructor and invoke nodes.  However, the application opens in its own window.  Is there a way to run from a child window within the façade (ideally, within a tab on the front panel control)?

  I'm in LabVIEW 8.6.

  Thank you.

  smercurio_fc wrote:
  I don't think that it actually works. My understanding is limited about this feature, but since I read it only works with the pop-up windows and windows that are already children. The application's main window is not a child window.

  I've done it before.  I have attached a simple example using Notepad.  Make sure that the notebook is already open no open files.  Since the example is not the position of the child window, the position relative to the window will be the same, because it is off the desk.  So, make sure the upper left corner of the Notepad is close to the origin of the desktop computer.

• display the error when editing on front panel

  Hello

   

  When I add another tab (notching amplifier) in the front panel, the program displays connection error. What should I do to get rid of these errors? I am attaching the file along the slot vi.

  Kind regards.

  This happens because the data type of the tab control changes (you add another page). A tab control is essentially an enum and enum values are part of the data type. A reference to the tab control control is to be packaged and passed in several subVIs. Cluster of frontage on these subVIs control has the element 'Hand Control' value "Include the Data Type". Thus, what they expect to see (for example, a tab with 3 pages) is not what they get. That is why the thread cut. You must either:

  • Uncheck "Include the Type of data" for the item "control of the hand. I don't know what other impact this will have, as I look at all the code.
  • Update all the controls on the front panel with a new reference to the command.

  Aside: who wrote this program needs a lesson on the typedefs.

• LabVIEW support 3 error code: could not load front panel

  Hello

  my colleague has a problem after the update to LV2011 (from 2010) and now get: LabVIEW support error code 3: could not load front panel

  Even on my system (also tried a massive compilation)

  

  He's afraid of losing some of his works.

  Zipped file is attached

  Hi Henrik,

  It should work now.

  Instructions to fix a corrupted in 2011 VI or more:

  1. close LabVIEW

  2. Add connPaneRecoveryMode = true to the file LabVIEW.ini (-the file LabVIEW.ini is located in the folder of National Instruments > LabVIEW 2011 > LabVIEW.ini)

  3. open the VI corrupt.

  4. press CTRL + A on the block diagram and the copy / paste to a new VI.

  5. save the new VI.

  6. close LabVIEW and remove the token of the ini (VERY IMPORTANT)

  7 restart LabVIEW and load the new VI and check that it is correct. Save

  Cheers, RMathews