any problem updating 10.7.5 to el capitan

Similar Questions

• Is IOS 9.3.2 update cause any problem on my phone?

  Is IOS 9.3.2 update cause any problem on my phone?

  What are all the specs is added to this update.

  My phone looked up crash when you receive an incoming call. This happens twice in the day.

  Can you please send back with your answer to all these questions.

  No problem causes update for devices, updates are made to overcome bugs and Yes, it is good to update your device to the latest version.

  The specifications are bug fixes and improves the security of your iphone.

  After updating your device works very well, otherwise ping - me and clarify the problem.

• Cards will be open any after update 9.3. Anyone else having this problem?

  Cards will be open any after update 9.3. Anyone else having this problem?

  No, not at all. Cards work properly.

  Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

  Also, make sure card is configured to use mobile data (settings app > cell phones > cards [turn it on if it isn't already].) And that location services is enabled for it (settings app > privacy > location Services)

• Hi, I recently bought an iPhone 5s. Now, according to the sources, the new "5se" would probably replace the ' 5s ' in the near future. I'm afraid that I won't get it more updated and after sales support for my 5 seconds (if any problem is found). Is this

  Hi, I recently bought an iPhone 5s. Now, according to the sources, the new "5se" would probably replace the ' 5s ' in the near future. I'm afraid that I won't get it more updated and after sales support for my 5 seconds (if any problem is found). Is this possible? Apple will provide an upgrade for free or minimum package 5se 5 seconds it's users?

  The terms of the terms of USE on this forum we cannot speculate on what Apple may or may not do. That being said, there is no priority for what you ask. There is no way of knowing how long your device will be able to continue to upgrade to new versions of iOS. As long as he is able to run the new versions of iOS, it is fully supported. This is the level of iOS, not the hardware that is important here.

  See you soon,.

  GB

• Windows Update is still at 0% download, MSE does not, update any problems to connect to Microsoft's servers?

  I just installed windows 7 on my laptop and my desktop computer. My laptop works 100% fine without any problem at all. However my office is struggling to download updates via both windows update and to Microsoft essentials security.

  The State of windows update is still ' Windows is downloading updates (all 0%). "and never changes.
  Microsoft security essentials tray status is 'Check updates', and when I restore the window it says "search...". ", but no progress beyond this point. The MSE has only been going on for about a day now, but the Windows update thing has happened since pretty close to the installation.
  I don't know if that helps, but initially I think downloading an update, then remained in the thing of locking system, to the "installation 1 of 4 do not unplug the computer" for 8 to 10 hours, so at that point, I had to disobey microsoft and reset the computer.
  Any help would be appreciated.

  Hello

  References to Vista also apply to Windows 7.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Can I roll back Windows 8.1 for windows 8 if any problem occure after update

  I use Windows 8 unique language. Now, I had a unilingual windows 8.1 update.
  I can go back to windows 8 unique language in case of any problem of update eindows 8.1?

  Fadilp

  It depends on.  Check the information here http://wind8apps.com/uninstall-windows-8-1/

• Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, s

  Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, when he got the address "nordensstjrnor". That me ok at first, but now I really need to give the first address once again, "nordensstjarnor". But when I try, the alternative of the site of ' publish on ' old isn't here. And if I try to create a new one, but with the old URL, the box turns red. What can I do?

  The reason why you cannot change nordensstjarnor.businesscatalyst.com is because a different Adobe ID is used for the publication of this site.

  t * [email protected] is used for the publication of nordensstjarnor.businesscatalyst.com

  t s. * [email protected] is used for the publication of nordensstjarnorindex.businesscatalyst.com

  You must make sure that Adobe ID is used in account publish, so that you can see a list of the websites published under this account. Go in Edition > Preferences > publish on Business Catalyst > publish with accounts

  You can pass the accounts for you can also make changes to the sites.

  Thank you

  Sanjit

• the site theme is problem with firefox, but not any problem of chrome with!

  the site theme is problem with firefox, but not any problem of chrome with!
  for ex: http://haftegy.ir
  How to fix?

  Wow sorry! IM update firefox to the latest version and my problem is solved.
  Thank you very much.

• WINDOWS COUNTERFEIT NOTIFICATION APPEARED JUST AFTER YEARS WITHOUT ANY PROBLEM

  EVERYTHING WAS FINE, THEN I UPDATED MY PROGRAM STOPZILLA... NOTICE OF COUNTERFEIT WINDOWS APPEARED AND ALSO LOST MY DESKTOP BACKGROUND, A POP-UP WINDOWS IS NOW TELLING ME THAT MY WINDOWS XP CANNOT BE VERIFIED.  I HAVE no SYSTEM RESTORE for SEVERAL DAYS BEFORE this CHANGE HAPPENED... HE MADE NO DIFFERANCE.   ANY SUGGESTIONS? Help!... Thank you

  Hello

  ·        You are able to boot to the desktop without any problem?

  ·        What is the exact error that you are experiencing?

  ·        This error appears randomly or whenever you access any application?

  ·        You have a genuine copy of Windows XP is installed on the system?

  I suggest you to check if the Windows XP that is installed on the system is authentic. Click on the link below.

  Description of the Windows Genuine Advantage Notifications application

  http://support.Microsoft.com/kb/905474

  I suggest to update your product key on the system and check if the problem is resolved.

  Update your Windows product key

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key

  Once you have updated the product key, windows xp validate and verify.

  Validation is as easy as 1-2-3!

  http://www.Microsoft.com/genuine/validate/validatenow.aspx

  Maybe it's that your system is infected. I suggest you to scan your system for viruses and malware using a care Microsoft and Microsoft security essentials. Check the links below.

  Live Onecare

  http://OneCare.live.com/site/en-us/default.htm

  Microsoft Security Essentials

  http://www.Microsoft.com/security_essentials/

  Malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Screen blue/check with your provider of material for any BIOS update...

  Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer of changing video card try update driver

  Check with your hardware vendor for any BIOS updates. disable BIOS memory option such as caching or shading if you need to use safe mode to remove or disable components. Restart your computer, press F8 to select advanced startup options, and then select Safe mode

  Techniqal Information:
  Stop: 0X0000008E (0XC000001D, 0X818A8803, 0X88360A94, 0 x 0000000)

  Hello

  For troubleshooting see BlueScreens using BlueScreenView and MyEventViewer and other methods
  This thread.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/842fa8cf-535e-4b5d-9416-85eb31edbe6f

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="">
  * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.
  
  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problem updating Windows in Windows 8 - 0x8007000d

  one of the custom of updates available ran install.i the resolution of the problems, it is said, it sets problems.yet 3, will not install the update. and whenever I run the troubleshooter it detects and resolves the same 3 problems

  

  Hello

  We appreciate your efforts on this issue.

  -Is this problem specific to any particular update or all updates?

  If you encounter the same problem after solving the problems running Windows Update, it means that a file needed by Windows Update is corrupted or missing. I suggest you run the DISM tool and check if it helps.

   

  1. Enter in the right edge of the screen and then click on Search.
     (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click find.)
  2. Enter command prompt in the search box.
  3. In the results list, drag down on or right click command prompt, and then press or click run as administrator.
  4. In the administrator: command prompt window, type the following commands. Press ENTER after each command:

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  To close the administrator: command prompt window, type Exitand press ENTER. Run Windows Update again.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Problems updating Adobe Reader XI

  I have been using Adobe Reader version 11.0.10 all year round without any problems, except for the part 'all year': update did not work either automatically or manually, because he told me "no update available" so that the release notes page shows that following three updated quarterly have been released. Is there an explanation known for this?

  In any case, I took matters into my own hands by going to planned 11.0.13 update, October 13, 2015 - Acrobat and Adobe Reader Release Notes and download a patch (version non - MUI 44.9 MB of AdbeRdrUpd11013 - hope, I chose correctly?) Correctly applied the patch and I'm still able to read PDF files, but there is a minor problem annoys me: Manage Add-ons in Internet Explorer reports yet my version as 11.0.10. I think it's because the AcroPDF.dll file is still the 11.0.10 (modified 12/03/2014) version and has not been replaced by the hotfix. He really had been no revision to this file in the latest three versions, or the patch do not apply correctly? And is there a direct link to a 11.0.13 full installer (the main download page offers only 11.0.10)?

  I also have the very common problem of Firefox reports a plugin obsolete, although he acknowledged the 11.0.13 version, but disturbs me. FWIW, a response to someone else's question to Firefox, said the auditor plugin now considers anything but Acrobat Reader DC is obsolete, which seems to be the only reasonable explanation.

  Thank you

  According to the information found on another site, regular quarterly patches for Adobe Reader MSP are cumulative, that is, you just apply the last being; but the patches that resolve the specific problems of security are incremental. According to the release notes, the latest three patches for reader XI have been updated quarterly regular, AdbeRdrUpd11013.msp apply to my English version of 11.0.10 was therefore correct. Updater as to why said me "no update available", I suspect it is because I was running 11.0.10 on an operating system not supported (Vista). It bothers me a little that Internet Explorer always reports the 11.0.10 version, but in all likelihood it is simply because Adobe has not changed AcroPDF.dll since last December. I liked this discussion!

• Hello, we just bought illustrator and we checked our bank account, and he is not charged. ¿Pourriez - you please check if there is any problem?

  Hello, we just bought illustrator and we checked our bank account, and he is not charged. ¿Pourriez - you please check if there is any problem?

  Hi Cecilia,.

  I checked your account and it shows the Illustrator subscription be active and the payment has been received.

  Please check the help below document to download the application and get started:

  Using creative cloud | Download, install, update or uninstall applications

  Kind regards

  Sheena

• Anyone else having problems updating apps from the app store?

  Anyone else having problems updating apps from the app store?

  I have the problem. I'm running on iOS 9.3.2... I have 29 apps waiting for update, but its not updated. No matter what fix on this yet?

• Why does Firefox Mac returns 'Server not found' for a website but Safari on Mac same load site without any problems?

  The financial company Web site www.gmo.com will not appear in Firefox 32.0.02. Server not found is the only result. Safari loads Web site without any problem and Firefox for Windows computer in the House support the site without problem. All the other sites I have access, including banks, Amazon, etc. loads normally.

  What/why the Mac of Firefox version would not be able to to connect/load this site?

  The company of people told me that no one else has reported this problem and other people in my company can access the site. And they cannot reproduce the problem.

  My ISP provider could not see anything from their point of view. And access all computers to the modem/router in the House everything without any problems.

  Anyone have any ideas on what would cause this or how to go about troubleshooting?

  Thank you for your time.

  Looks like it's something on the computer. There are cookies that must be removed individually from the Firefox profile.

  To do this, go to the Firefox Menu, tap Preferences, then tap privacy and then delete cookies or cookies see the. You can search the sites that gives you problems and remove them. Restart Firefox.

  It could also be that you add a DNS server for your connection. 8.8.8.8 is google, but I don't know if this would affect given that the server is not found, not that there is no link, that's why it does not sound like a connection problem, but a cache problem. Use the Profile Manager to create and delete profiles Firefox