Any solution for "The Audio Service is not running"?

Similar Questions

• No sound. Error "The Audio Service is not running"

  The sound stopped working on my Dell XPS M1210. I get the message "The Audio Service is not running" and the resolution of problems can't fix. Any suggestions?

  Hello

  See if that helps you.

  Do to Dell drivers and download page > equip your Dell model number > follow the prompts to find the drivers for your operating system > Search Audio drivers > download and install.

  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  See you soon.

• HP Pavilion Notebook PC g7 - The Audio Service is not running

  I don't have sound on my PC for a few weeks, but when I use a headset it is solid. Today, I saw a message saying that the Audio Service is not running. What is going on?

  HP Pavilion Notebook PC g7

  #ABA product number A6Z29UA

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  Once this done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• When I turn on my laptop and it does not have the startup sound, video, or audio won't work.sound icon shows the audio service is not running.

  Hello
  I'm not a problem with my his laptop. I don't get all the sounds, even start-up noise. the audio icon indicates that the audio service is not running.when I try you trouble shoot the problem. I get the message the windows audio and generator of endpoint audio windows needs to run correctly for audio work for sound. At least one of the device does not work correctly.
  waiting for answer

  Sincerely

  Hello

  Did you of recent changes to the computer that caused the problem?

  What is the brand and model of the computer?

  What issues you're having with videos?

  To solve the problem, see these articles:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  It will be useful.

• Problems with error Windows Audio and Control Panel "one or more of the audio service is not running.

  I'm a bit of a technophobe, but I'll try to explain my problem, I got better.  I recently had a problem with Windows 8 and refreshed my system.  After refreshing, I installed AVG Anti-virus and that's where my problems really started.  After installing AVG I have no sound and my control panel usually pop up.  The box is displayed but there is nothing in it and it sorts just of sticks, frozen.  I tried the fixes recommended to fix my sound. The speaker in my taskbar icon has a red x on it and when I try to open it it goes right to the problem-solving mode, then comes up with "one or more of the audio service is not running.  When I try "run services.msc' and try to start Windows Audio through Services I get error 0x800706cc.  I tried to uninstall AVG and reboot, but it did make a difference.  Please help, this leads me to the madness now.  Nothing I try seems to work!

  Installation of AVG is when the problems started, I would start by undoing that.  Since the normal uninstall did not help, use system restore to return to a work situation.  Check here and use the #1 option.

• The audio service is not running

  Today, I turned on my laptop to discover that the sound did not work. I tried updating the drivers, restart the computer and try the default of repair tool, but nothing has worked so far. Any ideas?

  I have Lenovo Z50

  Thank you

  Hello! I recently solved this problem on my pc. AVG detected malware in the last patch of Win8.

  However, it is not a malware and relates to your audio services.

  Start AVG, click history, and then click quarantine.

  Click on the item with the EXACT time that you started windows was last updated, NOT get back anything else. Worked for me.

• Windows 7 - the Audio Service is not running

  How to operate?

  How to operate?

  1. click the Start button, type services.msc in the search bar and press the Enter key.

  2. in the right pane, check if the Windows Audio service is started.

  3. otherwise, please, double-click the service. In the 'Général' tab, make sure the "Startup Type" is "automatic". Then please click the button "Start" under "Service status" to start this service.

• Cannot start the unit because the authorization service is not running - cannot start service

  I'm weirded out. When I try to start the unit on my VM, I get the following message:

  The Virtual Machine cannot be set to Unity mode because:
  -The VMWare authorization Service is not running.

  So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

  Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

  Event Viewer is a little more detailed... But not really useful:

  Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

  NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

  Technical details:

  Host: Windows XP SP3 (French)

  Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

  VMWare: 7.0.0 build-203739

  Client: Windows XP SP3 (English)

  I have attached my log of vmware just in case. Will be extremely grateful for any help!

  Thank you!

  The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  and repeat once more for authd thereafter;

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

  "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

  Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

  If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

  Joakim

  BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

• audio service is not running

  I use a HP Pavilion dv4 laptop, product #WA683UA #ABA. There is a red X next to the "speaker" icon. When I move my mouse over the "speaker" icon, I saw the following message, "the audio service does not work."  How to fix this?

  Hello

  Hold down the Windows key and press R.  In the run box, type services.msc and press ENTER,

  Verify that the following services are all showing that status = started and the Startup Type = Automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• Windows Firewall settings cannot be displayed because the associated service is not running

  I get the message 'Windows Firewall settings cannot be displayed because the associated service is not running' when I try to restart my windows firewall, followed: due to an unidentified problem, windows cannot display settings.

  Can someone help me? I want to restart my windows firewall, which recentloy has stopped working.

  Hello

  No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
  is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
  than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
  you are, of course, that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• "The Audio Service is not working" - read a few other threads but without success

  Hello

  Thanks for any help I receive in advance,

  my sound was working perfectly last night, done a windows update and resolve now them audio custom work and cannot solve the problem with an automatic, the message I get is:

  Problems found: one or more audio device does not work currently not fixed

  Any help would be appreciated

  Hello!!! can you tell me you have a single machine windows7 or mutiple.

  I suggest two things here

  (1) try to copy and merge the audio of an another windows7 home premium or better service

  You can do this by going into the Registry Editor (make sure that the other computer is also a 32-bit system)

  HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

  While copy on your machine and merge. Then restart your system.

  (2) you can try an upgrade on the spot with the windows7 dvd. Where you can repair the windows all without losing what.

  Thank you. :)

• HP G71-449WM. Windows 7 64-bit. "The audio service does not work.

  I downloaded all the updates that I can find anywhere. My roommate has deletion of things on my laptop for 'performance' and now I have no sound. I go to my device manager in the computer and it is says my IDT HD audio CODEC works correctly. And my Intel(r) High Definition Audio HDMI does not work correctly. What should I do to get his new? The the small speaker in the far right of the task bar icon has an X on it, as she was mute. BUT it's not. Help? /

  Hello

  Open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all displayed as status = started and the Startup Type = automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  Kind regards

  DP - K

• message "the windows service is not running" and it will not check for updates

  Original title : I'm trying to run the update and it says my windows service does not work and it checks the updates... How can I solve this?

  I am trying to run windows update and it said: my windows service does not work and it checks the updates... How can I fix it?

  Hello.

  Did you change your computer?

  Method 1:

  I suggest you to follow the steps and check.

  Click Start, in the search box, type in Services,

  Check the status of the following service and ensure that they are running

  Background Intelligent Transfer Service

  Cryptographic services

  Windows Update

  Under each service, click Start

  General, and then click Start under the service status:

  Method 2:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  See also:

  I would also say that reset you windows update and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058