Any way to automatically select the 1st row of DataGrid?

Similar Questions

• Any way to automatically adjust the 1st line of the text of "raise" for the initials when necessary?

  Or maybe a script?

  Example:

  You have a paragraph that begins with a word starting with a dropcap A. I wish that the first line of "raise" to be closer to the top of the a. really the letter A is the only one who really needs. With the help of Sabon. I realize that each letter is different, but in a book it would save a lot of time if there is a style/script to do this. I use CS6.

  Thank you

  SL

  It should not affect the two lines. Doesn't work for me. Only the first line.

  The first line is:

  DropCapgracesecondLetter

  If set you the kerning between grace and secondLetter, only the

  first line is affected. This is the point of adding hair space

  (Type > insert white space > space hair)

  If you don't add the hair and just go ahead and add negative

  kerning between the drop cap and the second letter, then indeed the two lines

  are concerned.

  Ariel

• NB500-108 does not automatically select the boot device

  Hello

  When I start the computer (NB500-108), it gets as far as the "Toshiba Leading Innovation" screen and stops. It will allow me to select F2 and F12, but I have to do it EVERY time I start the computer. It seems that it will automatically select the HDD/SSD drive and I can't find in the start menu anyway to fix this problem.

  I tried running repair of the boot from the Windows 7 repair disc and even if it is said that there is no problem, I would consider it a problem.

  Any help would be greatly appreciated.

  Thank you

  I have same NB520 and I ve never done in this situation.
  Try it please to the value of the default BIOS and check if the problem persists.

• Select the top row of ADF Table default

  jdev 11.1.1. 6

  In my application, I have a fall towards the bass and based on the value, select from the drop-down list on the af: table is filled (using the drop-down list vcl property, I'm populating the VO based on which the table is).

  The table has "selectionListener" defined in a method at the bean so that every time a line is selected some operation.

  < af:table value = "#{bindings." RoleVO1.collectionModel}.

  var = "row" rows = "#{bindings." RoleVO1.rangeSize}"width ="500 ".

  "partialTriggers =": soc1: cb1: cb2.

  emptyText = "#{bindings." RoleVO1.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." RoleVO1.rangeSize}.

  rowBandingInterval = '0 '.

  selectedRowKeys = ' #{bindings. " RoleVO1.collectionModel.selectedRow}.

  selectionListener = "#{CRoleARoleBean.roleTableSelection} '"

  rowSelection = "single" id = "t1".

  editingMode = "clickToEdit."

  Binding = "#{CRoleARoleBean.roleTable}" >

  I have here a certain way, I can make the top row of the selected table and trigger the selectionListener by programming the dropdown each time value is bud?

  Please notify

  by selecting the default line can be obtained by adding after the vcl in drop-down list:

  this.roleTable.setRowIndex (1);

  RowKeySet ch = this.roleTable.getSelectedRowKeys ();

  PS. Clear();

  PS. Add (this.roleTable.getRowKey ());

  AdfFacesContext.getCurrentInstance () .addPartialTarget (this.roleTable);

  Make sure the displayRow selected = is defined in the table property

• Is there any way to "adapt to the size of the image" a bin of clips?

  I run a 1920 x 1080 doc project in first Pro CC with a range of sizes and types of media.  I purposely do NOT preset preference "default scale to the size of the image" to maintain the quality of my still image data base to allow pans and zooms.  I imported since, connected and sub cut a very large number of 720 x 486 QT stock of archive films.  After doing without presetting of the first scaling by default, I am experiencing now to apply "scale to the size of the image" to each edition in my sequence that I work.  Is there any way to "adapt to the size of the image" my bin of clips? or am I now stuck having to convert the original movies to 720 x 486 QT 1920 x 1080 and then reissue of links in first to keep all my data void cutting?

  What is in the bin, select the clip, remonter back towards the top of the screen and next to file and editing, select Clip

  Then go down to video Options

  Choose scale to the size of the image

  who do you want?

• By selecting the last row of the table

  I'm trying to select the last row in a table. The tables will have a different number of lines, so I can't select based on a line number. I tried to use the location options, but get an error that "the object is not a function". Not sure what the problem is.

  table = app.selection[0];
  if (table.hasOwnProperty("baseline")) table = table.parent;
  if (table instanceof Cell) table = table.parent;
  if (table instanceof Column) table = table.parent;
  if (table instanceof Row) table = table.parent;
  if (table instanceof Table)
  
  {
              table.rows(LocationOptions.AT_END).cells.texts.everyItem().fontStyle = "regular";
   }
  

  You can use the placement options for this?

  Hello

  table. Rows being a collection of object using the index-[1] is a proper way

  but cells.texts generates an error. Change it to:

  table.rows[-1].cells.everyItem().texts.everyItem().appliedCharacterStyle = "myriad regular";
  

  Jarek

• I would like to know if there is any way I can remove the 32-bit and keep the 64-bit without harming my computer

  I ran windows 7 installation on my computer using DVD who had 32 and 64-bit data and for that I currently have 32-bit and 64-bit installed in my computer. So I would like to know if there is any way I can remove the 32 bit and keep the 64 bits without harming my computer or stored data because now both bits is eating space on my C drive/partition!

  OT:

  Windows

  Why do you think you have "32-bit and 64-bit" versions of Windows 7 installed?

  If you installed the 64-bit version (which you will need if your computer has more than 4 GB of RAM and you want to use all of this RAM), you can see a few references to 32-bit architecture.  The 64 bit version of Windows needs these files in order to run software that is designed for 32-bit architecture.

  Perhaps the most obvious instance is the presence of the following two directories:

  C:\Program Files and C:\Program Files (x 86).  It is normal for both of these directories present in a 64-bit system.

  Maybe this will help--> 32-bit and 64-bit Windows: frequently asked questions

• Any way to get around the problem of compaibility ITE 8211 ATA/ATAPI

  Any way to get around the problem of compaibility ITE 8211 ATA/ATAPI

  Hi EwenWood,

  You want to know a way around the issue of compatibility ITE 8211 ATA/ATAPI. I will help you in this problem.

  According to the Windows 8 Compatibility Center, we have all the information available for ITE 8211 ATA/ATAPI. Click here to know more: http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=win8&Locale=en-us&TextSearch=ITE%2B8211%2BATA%252fATAPI&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  I suggest you to contact the manufacturers of devices for updated drivers.

  I hope this helps.

• by automatically selecting the folder of origin for registration

  When I open a PDF from a folder and make changes, I want to CD to automatically select the location/folder of original file for recording. How do I do that? the earlier version of the drive used for this.

  Hi andrewf91748828,

  I understand your concern, but it is by default in a particular location, you will need to manually, navigate to the location you want to save the file.

  He also recalled frequently saved areas which can be directly selected to save the file.

  Kind regards

  Nicos

• When I select a layer, I want it to automatically select the content

  I create a new layer empty, then add 1 big brush with very soft edges (making it difficult to see where it ends up actually).  When I select the layer, I want it to automatically select the stroke of brush to resize or move or other.  How can I do this?  Sorry if I don't him have not properly explained.

  With the selected layer, Ctrl + T (PC) command + T (Mac), then you can enter an anchor hold SHIFT and drag... ?

• Please help me renew my membership - I have a lot of management design/photo to do today and no way to access the software!  I have a subscription through my school teacher and don't see any way to renew under the "regime".

  Please help me renew my membership - I have a lot of management design/photo to do today and no way to access the software!  I have a subscription through my school teacher and don't see any way to renew under the "regime".

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Numbers automatically selects the "date format" for cells.

  Numbers automatically format selects 'date' of certain cells.

  I need "numbers."

  I want to calculate simple interest due on the amount, the interest rate and number of days.

  When I input "number" format of the result cell and calculate the amount * rate * number of days divided by 365 always automatically shows something unwanted and the format "date." Furthermore, I'm not able to change the AutoFormat ("date") in "number".  How to bypass this automatic selection?

  Thanks in advance

  UbiUbu

  Maybe you can share what, exactly, you enter in a cell.  A screenshot is also useful.

  

  Here's a way to do what I think you want:

  Enter amounts in cells B1, B2 and B3

  Select cell B6, and type (or copy and paste it here) the formula:

  =B2*B3*B1/365.25/100

  shortcut for this is:

  B6=B2*B3*B1/365.25/100

• ASA and AnyConnect - automatically select the best server

  If I have two servers in different regions, is it possible to have the AnyConnect client to connect to the server, it has latency less also?

  I'm sure I saw a reference to this before, but I am struggling to find any documentation on this subject. For example, I have an ASA in Europe and an another ASA in North America. I would like to the client AnyConnect to automatically determine which server it has smaller response time too and that allows to connect too.

  I would appreciate if someone can point me in the right direction.

  Thank you

  Mark

  Go to the Preferences of VPN tab in the AnyConnect client settings and check the box ' Enable automatic selection of VPN server.  This should get you what you ask.

• Automatically select the correct check box based on choices made in the previous section?

  With the help of LiveCycle to create a form that contains a table. This table has 3 columns with 15 boxes in each column.

  Here are these 15 rows 3 more boxes that have calculated values. In each row of the table one of the checkboxes can be active at a time.

  Based on the majority of choices in a column of some, the calculated corresponding checkbox must be verified. (If most of the choices are made in column 1, then the 1st calculated box must be marked, etc...)

  The sentence that I am writing the JavaScript code that selects the checkbox correctly calculated. Currently, I'm just trying to understand it with only 3 first lines and I can reproduce the template after.

  Table e.g.: ("BOLD" is calculated)

  CheckBox20	CheckBox35	CheckBox50
  CheckBox21	CheckBox36	CheckBox51
  CheckBox22	CheckBox37	CheckBox52
  [CheckBox66]	[CheckBox67]	[CheckBox68]

  Here's the code I came up with that day, but it does not just anyone, although when I used it it worked just to 2 columns. (just added the part about the third column in the instructions 'or')

  (In the script for the calculation of box 66)

  //larger values than other columns
  if ((Row1.CheckBox20.rawValue == "") + (Row2.CheckBox21.rawValue == "") + (Row3.CheckBox22.rawValue == "") > (Row1.CheckBox35.rawValue == "") + (Row2.CheckBox36.rawValue == "") + (Row3.CheckBox37.rawValue == "") || (Row1.CheckBox50.rawValue == "") + (Row2.CheckBox51.rawValue == "") + (Row3.CheckBox52.rawValue == ""))
   {this.rawValue = "0";}
  
  //smaller values than other columns
  if ((Row1.CheckBox35.rawValue == "") + (Row2.CheckBox36.rawValue == "") + (Row3.CheckBox37.rawValue == "") || (Row1.CheckBox50.rawValue == "") + (Row2.CheckBox51.rawValue == "") + (Row3.CheckBox52.rawValue == "") > (Row1.CheckBox20.rawValue == "") + (Row2.CheckBox21.rawValue == "") + (Row3.CheckBox22.rawValue == ""))
   {this.rawValue = "1";}
  

  I'm new to JavaScript for all advice is appreciated.

  Looking at the conditions, it seems you are trying to say "If column 1 column 2 or column 3, then do something." JavaScript cannot read conditions like that. It's playback "if (column 1 column 2) GOLD (column 3), ' and he doesn't know what to do with this issue of column 3, except if it is 0 or 1.

  Here is an example of use of only two lines and three columns. The rawValues are 0 and 1 for each check box. I have it set so that if column 1 has several checkboxes, then Col1 gets checked. Similarly, the col2 or 3 boxes will be checked if their columns are the most populated. I don't get the opportunity to have several boxes marked if there are two columns that have the same number of boxes checked. (You can do this by just changing > to > = in the conditions.)

  

• How to select the second row in three?

  I use answers and are in a situation where some IDs have three related lines.

  I'm trying to flatten it so that each of these lines is displayed as a column.

  So instead of:

  ID fruits

  1 Apple

  2 Orange

  Peach 2

  2 plum

  Mango 3

  I want to see

  1 Apple

  2 plum fishing orange

  Mango 3

  I can get to the first (orange) and the last (plum) with MIN and MAX.

  For example (fruit) MIN or MAX (fruit)

  Answers how select the line in the middle (fishing)?

  Thank you!

  Use LISTAGG, but then to analyze the first second and third in their own columns using regular expressions... or change the data structure to match the use of the information (use is the master, not the slave)