AnyConnect client perform on ASA Server cert revocation checking? Can be configured?

Similar Questions

• Impossible to ping anyconnect Client IP de ASA

  Hello world

  I can't connect to cisco anyconenct fine no problem.

  When connected I ping the SAA in interface and other subnets that are behind the ASA inside the interface from the PC connected through the VPN.

  My only problem is that of ASA, I cannot ping IP of 10.0.0.5.

  ASA1 # sh anyconnect vpn-sessiondb

  Session type: AnyConnect

  User name: anyconnect_user index: 54

  Assigned IP: 10.0.0.5         Public IP address: 192.168.98.2

  Protocol: AnyConnect-Parent-Tunnel SSL DTLS-Tunnel
  License: AnyConnect Essentials
  Encryption: AnyConnect-Parent: (1) no SSL Tunnel: (1) AES128 DTLS-Tunnel: (1) AES128
  Hash: AnyConnect-Parent: (1) no SSL Tunnel: (1) SHA1 DTLS-Tunnel: SHA1 (1)
  TX Bytes: 12318 bytes Rx: 73502
  Group Policy: anyconnect_group
  Tunnel of Group: anyconnect_connection_profile
  Connect time: 23:21:28 MST Friday, March 7, 2014
  Duration: 0 h: 34 m: 33 s
  Inactivity: 0 h: 00 m: 00s
  Result of the NAC: unknown
  Map VLANS: VLAN n/a: no

  I ping the switch connected to ASA inside interface

  ASA1 # ping 10.0.0.2

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 10.0.0.2, time-out is 2 seconds:

  !!!!!

  Success rate is 100 percent (5/5), round-trip min/avg/max = ms 04/01/10

  I can ping from the ASA inside interface

  ASA1 # ping 10.0.0.1 - ASA inside interface

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 10.0.0.1, time-out is 2 seconds:

  !!!!!

  Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/1 ms

  ASA1 # ping 10.0.0.5

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 10.0.0.5, time-out is 2 seconds:

  ?????

  Success rate is 0% (0/5)

  ASA1 #.

  Journal of the shows

  March 7, 2014 23:00:52: % ASA-6-302020: built outgoing ICMP connection for 10.0.0.5/0(LOCAL\anyconnect_user faddr) gaddr laddr 192.168.1.171/1168 192.168.1.171/1168

  March 7, 2014 23:01:02: % ASA-6-302021: connection of disassembly ICMP for faddr 10.0.0.5/0(LOCAL\anyconnect_user) gaddr laddr 192.168.1.171/1168 192.168.1.171/1168

  Where IP 192.168.1.171 is ASA outside interface

  Concerning

  MAhesh

  Hello Manu,

  Have you tried to ping the network interior? Or the package from inside the source interface of the ASA? Remember, you should have some rules exemption nat for packets going through the VPN connection. That's how specify us which networks are allowed to join the VPN clients. If you ping without specify any interface the packet is going to come from the external interface, and probably this interface/subnet is not allowed through the VPN connection. Using split tunnel or tunnelall?

  You can try to activate the management of access to the inside interface and the ping from the inside. These packages should hit the exemption nat rule and will be sent through the tunnel instead of the Internet.

  These are the necessary commands:

  To specify an interface as an interface of management only, enter the following command:

   hostname(config)# management access inside

  Then, you could do an inside 10.0.0.5 ping to ping the ASA AnyConnect client.

  Notes on the access management command:

  If your VPN tunnel ends on an interface, but you want to manage the ASA by accessing a different interface, you can identify this interface as an interface for management access. For example, if you enter the ASA of the external interface, this feature allows you to connect inside the interface by using ASDM, SSH, Telnet or SNMP. or you can test inside the interface at the entrance to the external interface. Management is accessible by the following VPN tunnels types: client IPsec, the client AnyConnect SSL VPN and IPsec LAN-to-LAN.

  Hope this helps,

  Luis

• How to fix VMware View Server certificate revocation check connection error?

  Dear community,

  For about 2 weeks, I feel a revocation of the certificate check error in our environment Horizon see 6.2. The strange thing is that, within 12 hours about two (replication) connection servers and the vCenter Server / server of composer (on the same machine) are considered as having invalid certificates, even if, in fact, they are valid (CA certificates). We use no security servers.

  The view admin console shows the following for servers connection:

  The server certificate is not approved.

  The server certificate cannot be verified.

  For the vCenter, he said (that I have validated manually the certificate):

  No problems found.

  Certificate is not approved, but the thumbprint of the certificate is accepted.

  With the connection series on 'full', States that the login server logs for the vCenter server:

  TRACE (B 17-0 - 0E98) < VCHealthUpdate > [NativeKeyVault] validateCertificateChain response: {result = FAIL, EndEntityReasons = cantCheckRevoked, ChainReasons = invalid, SelfSigned = false, EndErrorCode = 16777280, EndInfoCode = 258, ChainErrorCode = 16777280, ChainInfoCode = 256, PolicyErrorCode =-2146885613}

  As far as I can see there no similar entries for login server certificates in the newspaper.

  At the moment I am under the environment with composer and vCenter certificates manually valid and invalid connection (red) server certificates (as view clients and browsers are not disabled).

  I already checked that I am able to do everything 'green' again via setting the registry key 'CertificateRevocationCheckType'2 (as described here Configure the server certificates certificate revocation check). This brings me to the conclusion that one of the intermediate certificates cannot be validated. So, I had the information a "version" of an intermediate (intermediate certification authority) certificate has been revoked. There seems to be no coincidence - like the time point is as well, but this particular version does not appear to be used in the servers of my connection.

  However, even with full logging enabled, I can't information which (intermediate) certificate cannot be validated and why. I expected to see something like 'OCSP verification' or 'check the CRL' but I can't find it in the newspapers. However, I noticed that one of the intermediate certificates lacked the OCSP URL (even if the field "Authority Information Access" existed). Of course I updated the certificate with a version that contains the OCSP URL, but it has not changed anything.

  In addition, I checked manually all of the certificates in the chain with openssl (for OCSP) and CRLs as well, but everything seems to be OK (all URLS are accessible and no opportunity of certificate has been revoked). Actually, I do not interpret the error as "that the connection to the server is an invalid certificate because it has been revoked", but "it cannot check if it has been revoked. The servers do not need a proxy and nothing configured, so (I checked the proxy settings system context, also).

  For now, the problem is not critical, such as 'red' status connection server has no effect on our customers and so I could turn off certificate revocation check (or switch to check that the certificate of the server (2)). But of course, I would really solve the problem.

  Is there someone who can give me a hint on what to check, for example, how do I know which certificate cannot be controlled and why? Someone had the same or a similar problem? Support VMware is working on the problem as well, but they seem don't know is not the problem, either.

  I appreciate the thoughts and responses! Thank you!

  Best regards

  Fabian

  Dear community,

  During this time, I was able to correct the error described at the beginning of this thread. Jump to the end to see what could probably help you...

  1. At first, I installed an additional standalone VMware View Server connection in order to check the following related certificates:
     1. VMware support always told me to renew my certificates because they "were not valid" etc. - even if in fact they were (like external URL calls and attested manual verification and tests).
     2. That's why I created new additional certificates for the login server and configured to include the vCenter even as my production environment - only difference was I didn't inlcude the composer who runs the server vCenter himself.
     3. The result was that the server was "green" including both the vCenter Server certificate which could be 'not reliable' by the environment of production - strange, huh?
  2. After I reset the additional server to a turned wink where connection to the server was not yet installed (before that, I uninstalled the connection to the server in case there is information in vCenter thereon) and reinstalled as a replica of the production environment server. Somehow I expected this, but still quite strange the vCenter Server (and composer) now again was considered "invalid", even if the certificate of the server connection itself considered still valid and green. For test purposes, so I put certifice revocation checking on '2' (only one server certificate check) - but only on the 'old' production servers' and 'magical' everything has been considered valid. So as I see it, there seems to be some sort of information stored on the 'old' connection servers that makes them believe that invalid certificates and that the information is replicated on the third server unless I lower the revocation of the certificate controls on these servers. Altervative explanation could be that VMware View does not accept certificates with aliases that do not include the 'real' server name - that is / was in fact certificates the old servers connection. The new server certificate connection included the real name and the alias. I understand if this is the case, but then I expect that it be documented somewhere (I have not found this information) and also wouldn't understand why it worked without problem for several years before.
  3. After finding that out, I created new certificates for the 'old' connection servers, including aliases and real names and replaced the certificate on one of the servers (and restarted the login server) - only a few successfully. Once I put the revocation checking on '4' again on this server, the login server certificate was still considered valid, but not the vCenter and certificate of composer.
  4. Now, I've uninstalled the old login server (removed from the view) and reinstalled completely (including an update of the 2008 R2 2012 R2 OS) and after I have it reintegrated into the environment, everything remained green - as long I have will activate revocation checking on the second login server "old." This is why I did the same with this (completely reinstalled and reinstated it) and now everything is green with the revocation checking enabled on all replicas of server connection.
  5. The next step I uninstall the additional replica because I created only for troubleshooting purposes.

  So what will no doubt help in similar cases:

  • Reinstall the servers of connection one by one, including:
  • Uninstalling html access (if used), uninstall the login server to view, uninstall 'VMware' AD LDS Instance.
  • Removal of the connection to the server of replication group: run "s - r s uninstalled_ vdmadmin.exeservername" on one of the servers connection remaining.
  • Reinstall/Update OS (may not be necessary, but I did not test that)
  • Reininstall, return to the login server replica. If you used the certificates which included only the alias of the server I recommend you to create new ones, including the name of the server as well, but maybe it's not necessary as well. If you want to keep the certificates which only inlcude the alias it will be necessary to install this certificate after the first replication of the servers (see below).

  My question for technicians of VMware/developers: It is supported to use certificates include only the server alias. Otherwise why it worked before and where is it documented? Where are certificate cached information so that simply replace the certificate was only some, and not a complete success (see above). FYI - when I paired initially replicas that I had to install the CA (including only the pseudonym) after the first replication - now with certificates (including the server name and the alias), I could install the certificate before you replicate (= the login server installation).

• Connection to the server would not check when you configure Outlook Express with Charter Web Mail

  Hello! I call on my Outlook Express is installed on my Windows XP Professional. I need assistance with the configuration of Outlook Express with my Charter Web Mail. Charter, I called and they helped me with the setup but I'm stuck on the last part and it gave me an error on the server. The "connection to the server don't check not" and the Charter was not able to help me through, and they said it's a Microsoft Issue. I need some help here. Please help me! Thank you!

  See here: http://www.myaccount.charter.com/customers/support.aspx?supportarticleid=1241

  There are step by step instructions.

  Steve

• ASA and AnyConnect - automatically select the best server

  If I have two servers in different regions, is it possible to have the AnyConnect client to connect to the server, it has latency less also?

  I'm sure I saw a reference to this before, but I am struggling to find any documentation on this subject. For example, I have an ASA in Europe and an another ASA in North America. I would like to the client AnyConnect to automatically determine which server it has smaller response time too and that allows to connect too.

  I would appreciate if someone can point me in the right direction.

  Thank you

  Mark

  Go to the Preferences of VPN tab in the AnyConnect client settings and check the box ' Enable automatic selection of VPN server.  This should get you what you ask.

• Is there a method to determine the Anyconnect client types and quantities that connect to the ASA sslvpn?

  We need to determine the distribution of different Anyconnect sslvpn, connecting clients to our ASA hub. Is there a method, either in the ASDM or CLI (or syslog) to determine the type of customer and the meter (for example the Android and iOS vs Windows vs Linux)?

  There are 'user agent' field in vpn-sessiondb. You can check via ASDM or

   show vpn-sessiondb det anyconnect

  If my memory is good. (Exact symptom depends on version)

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...

• SSL VPN without disabled in ASA5505 after the Activation of the AnyConnect client

  Hello everyone,

  I am facing a problem with the VPN service in ASA 5505. Initially, I was using SSL VPN without customer who was working absolutely fine, no problem. Recently I bought AnyConnect Essentials License with license AnyConnect VPN, Mobile (for focusing on the Client SSL VPN Service for desktop and mobile respectively) and have activated these keys inside of the firewall. After that I may be able to connect to based on the VPN Client, using the AnyConnect client. Clientless VPN access is not allowing you to connect and displays an error (see the attached screenshot).

  I created two VPN profiles Viz, basic (for clientless VPN) and rvsvpn (for client based VPN). Download the AnyConnect Client I can connect to the rvsvpn profile. But if I try to connect using the basic profile, it throws an error has been to what is displayed in the exhibition.

  Please help me in this regard, as what can be done to use both the vpn connection profile. Or what the use of AnyConnect disables client access?

  Waiting for your help.

  Thanks in advance.

  Samrat.

  "Anyconnect essentials" in your configuration command to disable all profiles without customer (as well as other features that require the Premium license).

  Essentials and Premium are mutually exclusive as the performance of duties. You can have both installed licenses, but only use one or the other (and never both at once) in your running configuration.

• AnyConnect client... SSL vs. IPSec

  Hello

  I have a few questions on the Anyconnect VPN remote access.

  The anyconnect client works with SSL or IPSec ISAKMPv2? Y at - it no default or the default method?

  Where you would identify what method you choose? The anyconnect client automatically detects the type (SSL or IPSec)-based VPN server? How does the SSL over IPSec works in this case?  What is new ANyconnect 4.xclient?

  I would say that 90% or more customers use SSL.

  IPsec IKEv2 is used mainly by two categories of people:

  1. those who have need of next gen cryptographic algorithms for legal or regulatory reasons

  2. those who have had lovers, or CCIE candidates configure their VPN (joke - just a little bit)

  Is, when it is implemented correctly, did a good job to secure your traffic.

  The server (for example, the ASA) defines the method and the client that honors due to the associated connection profile that updates / downloads from the server.

  This initial process, even if you have IPsec IKEv2, normally happens over SSL as part of the preamble of IPsec session establishment. Manually, you can eliminate this small, but it is generally more trouble that it's worth.

• AnyConnect Client timeout

  Sorry if this question has already been addressed in another thread. I looked and found nothing, so I post here.

  We currently use the anyconnect client on of our ASA5520. The only question I have now is that the time-out is not

  seem to work correctly. I have never disconnected Timeout Idle current group policy set to 30 minutes and customers

  unless you disconnect manually.

  At first, I thought that KeepAlive or DPD has some how this affects. But after testing, they seem not to be. It seems

  that the timeout works everything simply. Anyone have any ideas of what I'm missing? Or the inactivity timeout function simply not work?

  Thank you!

  Jeff

  I look at the idle time-out as inheritance characteristic due to the fact that modern operating systems is inherently chatty.  If you run a sniffer on the AnyConnect AV and then let the PC for a few minutes, you can capture all kinds of packets to and from the client, even if you are not actively working on the PC.  If your intention is to manage user sessions, you can set a max session.  Once the maximum session time is reached, the user will be disconnected from the system.  Users must then reconnect if they require a continuous network access.  Dead Peer Detection is the mechanism used by the client or network to quickly detect a condition where the peer does not respond and the connection has failed.  For example, in a perfect world, all users of AnyConnect will right-click on the icon and click on disconnect to gracefully disconnect the session.  In reality, users might lose their connection to the Internet, on the eve of their PC when connected, etc..  Without DPD, head of network device will retain the now obsolete session information where the SSL client tries to reconnect.  Needed manual intervention by an administrator to manually disconnect sessions.  With DPD, the head can recognize the loss of conectivity to the customer and terminate the session information.  DPD is a Hello and ACK process between client and server.  If a series of Hello messages don't that would acknowledgment, the related session information are deleted from the client or server.  It is maintained by SSL and is not connected to the network traffic related timeout.

  Here are a few links for your reference.  Please let me know if I can be more useful.

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/SVC.html#wp1072975

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/vpngrp.html#wp1134794

• Find the Windows Version of the AnyConnect Client

  I want to find how many customers connect with AnyConnect SSL VPN from a XP computer.

  ASA reports the Type of Client like Windows operating system. Is it possible to get more detailed information?

  I don't think you can with AnyConnect Essentials.

  You must have AnyConnect Premium more license Advanced Endpoint Assessment to check the version of the client operating system. If you don't already have that, however, it would be a terrible expensive buy just for that purpose.

  It is also available if you use ISE (license Apex) as your AAA server and have a policy of posturing to evaluate the customer.

• AnyConnect VPN for Cisco ASA 5505 refused connections

  I'm trying to set up my Cisco 5505 with AnyConnect VPN client VPN access.  Here is the relevant information of my config:

  interface Vlan2
  
      mac-address xxxx.xxxx.xxxx
  
      nameif outside
  
      security-level 0
  
      ip address A.A.A.A 255.255.255.240
  
      !
  
      access-list outside_access_in extended permit tcp any host C.C.C.C eq pptp
  
      access-list outside_access_in extended permit tcp any host C.C.C.C eq https
  
      access-list outside_access_in extended permit tcp any host C.C.C.C eq ftp
  
      access-list outside_access_in extended permit tcp any host C.C.C.D eq https
  
      access-list outside_access_in extended permit tcp any host C.C.C.D eq ftp
  
      access-list outside_access_in extended permit tcp any host C.C.C.D eq www
  
      access-list outside_access_in extended permit tcp any host C.C.C.C eq smtp
  
      access-list outside_access_in extended permit icmp any any
  
      access-list outside_access_in extended permit tcp any host C.C.C.D eq ssh
  
      access-list outside_access_in extended permit tcp any host C.C.C.D eq 8080
  
      access-list outside_access_in extended permit gre any host C.C.C.C
  
      access-list outside_access_out extended permit ip any any
  
      access-list inside_access_in extended permit ip any any
  
      access-list inside_access_in extended permit ip any interface outside
  
      access-list inside_access_out extended permit ip any any
  access-group inside_access_in in interface inside
  
      access-group inside_access_out out interface inside
  
      access-group outside_access_in in interface outside
  
      access-group outside_access_out out interface outside
  webvpn
  
      enable inside
  
      enable outside
  
      svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1
  
      svc enable
  group-policy DfltGrpPolicy attributes
  
      dns-server value X.X.X.X
  
      vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
  
      split-tunnel-policy tunnelspecified
  
      split-tunnel-network-list value
  
      address-pools value palm
  
      webvpn
  
        svc rekey time 30
  
        svc rekey method ssl
  
        svc ask enable default webvpn
  policy-map global_policy
  
      class inspection_default
  
        inspect pptp
  
        inspect http
  
        inspect icmp
  
        inspect ftp
  
      !
  

  When I try to connect, I get this error in the real-time log viewer:

  TCP access denied by ACL from X.X.X.X/57356 to outside:A.A.A.A/443
  

  Here are the details of the license:

  Licensed features for this platform:
  
      Maximum Physical Interfaces  : 8
  
      VLANs                        : 3, DMZ Restricted
  
      Inside Hosts                 : Unlimited
  
      Failover                     : Disabled
  
      VPN-DES                      : Enabled
  
      VPN-3DES-AES                 : Enabled
  
      SSL VPN Peers                : 2
  
      Total VPN Peers              : 10
  
      Dual ISPs                    : Disabled
  
      VLAN Trunk Ports             : 0
  
      Shared License               : Disabled
  
      AnyConnect for Mobile        : Disabled
  
      AnyConnect for Linksys phone : Disabled
  
      AnyConnect Essentials        : Disabled
  
      Advanced Endpoint Assessment : Disabled
  
      UC Phone Proxy Sessions      : 2
  
      Total UC Proxy Sessions      : 2
  
      Botnet Traffic Filter        : Disabled
  This platform has a Base license.
  

  Can someone tell me what I am doing wrong or what access list I'm missing?

  I have two Cisco ASA 5510 firewall with a similar setup configuration and the AnyConnect SSL VPN works great.

  Hi Matt,

  You are probably landing on the tunnel-group by default - you will need to indicate which group to connect to the client. This can be done in different ways - I see that you already have a defined group aliases, but to be able to use that you must configure:

  WebVPN

  tunnel-group-list activate

  Alternatively, if you have only a single group, you can add 'group-url https://yourasa.yourcompany.com/ permit' to the webvpn attributes tunnel-group.

  HTH

  Herbert

• Cisco AnyConnect Client - specify the certificate store in profile

  Hi all

  Running Cisco AnyConnect Client version 2.5.2019 with Cisco ASA 5510 version 8.4 (1)

  I can't get the work certificate (see attached picture) store profile option. I put this to the user, when it is set correctly it spreads to the customer as you can see in the file of configuration on the client computer, but it does not seem to enter into force.

  When a user is connected which has admin rights, and thus access to two local stores machine and the user must correctly a certificate store of the local computer. I know that there is a valid certificate in the store of users for these users as if I delete the local cert machine it takes so the cert of the user.

  No problem for users without admin rights they do not have access to the local computer store.

  Someone has any ideas why this doesn't work?

  Jason

  Hi Jason

  It seems that the ASA is actually still push the old profile to the client.

  From the CLI, check:

  cache dir: / SC/profiles

  more cache: / SC / profiles /.

  I guess this will show you the old profile.

  How do you have it change exactly? Using the profile in ASDM Editor? You push 'applies' later, do you have errors?

  In any case, use "disk0 more:" to verify that the profile on flash is correct (i.e. that there not the serverlist), then force the ASA to re - load this file using:

  conf t

  WebVPN
  SVC profiles disk0: /.

  Then check "hide: / stc / profiles /" once again to check it took it.

  HTH

  Herbert

• Option 'The Anyconnect client profile' missing in ASDM

  Hello

  I am trying to configure Anyconnect on the SAA and have successfully updated licensing, as well as downloaded the pkg anyconnect for web deployment. I activated anyconnect on the external interface and can now have the ASA push the client machine. Works very well. However, I would like to add the backup servers that the client will attempt to reach where the primary is down. I understand that "customer profiles" can be created to customize the parameters as follows. Problem is, when I followed the setup guide with instructions for the manufacture of customer profiles here:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html#wp1289905

  It shows that I should have an option for the Anyconnect Client profile and settings of the Anyconnect Client.

  I don't have one of these options in ASDM. Here's what it shows mine:

  

  I have another 'Profiles of Client SSL' option, but it does not appear the same as the above.

  

  Can anyone help with what I have to do to get the customer profiles option to be available, so I can add backup server for the customer information? Thank you!

  It could be your version ASDM. I note, however, that the Release Notes for ASDM for 6.3 (1) Note that this version (when combined with the support ASA 8.3 (1)) introduced the AnyConnect profile editor.

  You can run the 6.4 (7) Version ASDM curent with your ASA remaining on 8.2 (1). It would not hurt to try this.

  A little more awkward alternative is to use the stand-alone profile AnyConnect editor and manually deploy the xml profiles that result.

• Cisco VPN Client and Windows XP VPN Client IPSec to ASA

  I configured ASA for IPSec VPN via Cisco VPN Client and XP VPN client communications. I can connect successfully with Cisco VPN Client, but I get an error when connecting with the XP client. Debugging said "misconfigured groups and transport/tunneling mode" I know, they use different methods of transport and tunneling, and I think that I have configured both. Take a look at the config.

  PS a funny thing - when I connect with client VPN in Windows Server 2003, I have no error. The only difference is that client XP is behind an ADSL router and client server is directly connected to the Internet on one of its public IP of interfaces. NAT in the case of XP can cause problems?

  Config is:

  !

  interface GigabitEthernet0/2.30

  Description remote access

  VLAN 30

  nameif remote access

  security-level 0

  IP 85.*. *. 1 255.255.255.0

  !

  access-list 110 scope ip allow a whole

  NAT list extended access permit tcp any host 10.254.17.10 eq ssh

  NAT list extended access permit tcp any host 10.254.17.26 eq ssh

  access-list extended ip allowed any one sheep

  access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh

  sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0

  tunnel of splitting allowed access list standard 192.168.121.0 255.255.255.0

  flow-export destination inside-Bct 192.168.1.27 9996

  IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0

  ARP timeout 14400

  global (outside-Baku) 1 interface

  global (outside-Ganja) interface 2

  NAT (inside-Bct) 0 access-list sheep-vpn

  NAT (inside-Bct) 1 access list nat

  NAT (inside-Bct) 2-nat-ganja access list

  Access-group rdp on interface outside-Ganja

  !

  Access remote 0.0.0.0 0.0.0.0 85.*. *. 1 2

  Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1

  Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1

  Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1

  Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1

  Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1

  Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1

  Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1

  Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1

  dynamic-access-policy-registration DfltAccessPolicy

  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT

  Crypto ipsec transform-set newset aes - esp esp-md5-hmac

  Crypto ipsec transform-set esp-3des esp-md5-hmac vpnclienttrans

  Crypto ipsec transform-set vpnclienttrans transport mode

  Crypto ipsec transform-set esp-3des esp-md5-hmac raccess

  life crypto ipsec security association seconds 214748364

  Crypto ipsec kilobytes of life security-association 214748364

  raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

  vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1

  card crypto interface for remote access vpnclientmap

  crypto isakmp identity address

  ISAKMP crypto enable vpntest

  ISAKMP crypto enable outside-Baku

  ISAKMP crypto enable outside-Ganja

  crypto ISAKMP enable remote access

  ISAKMP crypto enable Interior-Bct

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  No encryption isakmp nat-traversal

  No vpn-addr-assign aaa

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.192 outside Baku

  SSH 10.254.17.26 255.255.255.255 outside Baku

  SSH 10.254.17.18 255.255.255.255 outside Baku

  SSH 10.254.17.10 255.255.255.255 outside Baku

  SSH 10.254.17.26 255.255.255.255 outside-Ganja

  SSH 10.254.17.18 255.255.255.255 outside-Ganja

  SSH 10.254.17.10 255.255.255.255 outside-Ganja

  SSH 192.168.1.0 255.255.255.192 Interior-Bct

  internal vpn group policy

  attributes of vpn group policy

  value of DNS-server 192.168.1.3

  Protocol-tunnel-VPN IPSec l2tp ipsec

  Split-tunnel-policy tunnelspecified

  Split-tunnel-network-list value split tunnel

  BCT.AZ value by default-field

  attributes global-tunnel-group DefaultRAGroup

  raccess address pool

  Group-RADIUS authentication server

  Group Policy - by default-vpn

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared-key *.

  Hello

  For the Cisco VPN client, you would need a tunnel-group name configured on the ASA with a pre-shared key.

  Please see configuration below:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

  or

  http://tinyurl.com/5t67hd

  Please see the section of tunnel-group config of the SAA.

  There is a tunnel-group called "rtptacvpn" and a pre-shared key associated with it. This group name is used by the VPN Client Group name.

  So, you would need a specific tunnel-group name configured with a pre-shared key and use it on the Cisco VPN Client.

  Secondly, because you are behind a router ADSL, I'm sure that's configured for NAT. can you please activate NAT - T on your ASA.

  "crypto isakmp nat-traversal.

  Thirdly, change the transformation of the value

  raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

  Let me know the result.

  Thank you

  Gilbert

• Disable the download Anyconnect client / turn off the url connection

  Hello

  Is there a way to disable the Anyconnect client download when you navigate to the anyconnect url? Or just make the connection of the url is not accessible
  While users can still connect with their client anyconnect installed in the corporate network.

  Thank you!

  Dave.

  You can't disable the download directly. This had been discussed several times here at least one CSC who also confirmed a case of TAC. Link.

  A hack is that if your image Anyconnect is an older, users will never invited to be updated.

  Re URL, you can turn off the alias that fill the drop-down list on the web portal, but also long as your have the SSL VPN service active, external interface of the ASA will be used toward the top of the login page to less than the default connection profile.

  What is your reason for wanting to turn off in the first place? Perhaps there is another method to achieve what you want.