AnyConnect client... SSL vs. IPSec

Hello

I have a few questions on the Anyconnect VPN remote access.

The anyconnect client works with SSL or IPSec ISAKMPv2? Y at - it no default or the default method?

Where you would identify what method you choose? The anyconnect client automatically detects the type (SSL or IPSec)-based VPN server? How does the SSL over IPSec works in this case? What is new ANyconnect 4.xclient?

I would say that 90% or more customers use SSL.

IPsec IKEv2 is used mainly by two categories of people:

1. those who have need of next gen cryptographic algorithms for legal or regulatory reasons

2. those who have had lovers, or CCIE candidates configure their VPN (joke - just a little bit)

Is, when it is implemented correctly, did a good job to secure your traffic.

The server (for example, the ASA) defines the method and the client that honors due to the associated connection profile that updates / downloads from the server.

This initial process, even if you have IPsec IKEv2, normally happens over SSL as part of the preamble of IPsec session establishment. Manually, you can eliminate this small, but it is generally more trouble that it's worth.

Tags: Cisco Security

Similar Questions

AnyConnect VPN Client - works with IPsec

Hello

How can I do for AnyConnect VPN Client works with ipsec?

I tried with SSL and works normally.

But with IPsec does not work. Should I do something?

Thank you

Rodrigo

Rodrigo, Anyconnect works with SSL, in order to use IPSec, you must the Cisco VPN Client.

IOS router VPN Client (easy VPN) IPsec with Anyconnect

Hello

I would like to set up my router IOS IPsec VPN Client and connect with any connect.
Is it possible to configure an IPSec and SSL VPN Client on IOS router? I use for example a 1841.

It would be perfect to give the user the choice of SSL or IPSec protocol. And the user needs that the Anyconnect Client.

I think it's possible with a Cisco ASA. But I can also do this with an IOS router?

Please let me know how if this is possible.

Also is it true that the IOS routers are not affected to hear bug bleed? SSL VPN and SSL VPN with Anyconnect page is also save?

http://Tools.Cisco.com/Security/Center/content/CiscoSecurityAdvisory/CIS...

But I am in any way interested in using IPSec and SSL VPN on a router IOS...

It's true - CCP does not yet offer the options to configure a VPN IPsec with IKEv2.

The configuration guide (here) offers detailed advice and includes examples of configuration.

AnyConnect and SSL - VPN without client

Are there problems in running Cisco AnyConnect and SSL - VPN without client side by side?

I am currently looking into adding features for an ASA AnyConnect who currently set up to operate without SSL - VPN client. The system without client is not removed. I don't know how to set it up, I wonder if someone has already set up this or if there is no problem with this Setup?

Hi Daniel

It's a little complicated if you want a granular authentication and authorization, but it works.

I'm running an ASA with IPSec, SSL Client and clientless SSL.

Each of these virtual private networks with user/one-time-password name and certificate based authentic.

The main challenge is to put in place its own structure of profile cards, connection profiles, group policies and dynamic access policies.

Feel free to ask questions...

Stephan

SSL VPN without disabled in ASA5505 after the Activation of the AnyConnect client

Hello everyone,

I am facing a problem with the VPN service in ASA 5505. Initially, I was using SSL VPN without customer who was working absolutely fine, no problem. Recently I bought AnyConnect Essentials License with license AnyConnect VPN, Mobile (for focusing on the Client SSL VPN Service for desktop and mobile respectively) and have activated these keys inside of the firewall. After that I may be able to connect to based on the VPN Client, using the AnyConnect client. Clientless VPN access is not allowing you to connect and displays an error (see the attached screenshot).

I created two VPN profiles Viz, basic (for clientless VPN) and rvsvpn (for client based VPN). Download the AnyConnect Client I can connect to the rvsvpn profile. But if I try to connect using the basic profile, it throws an error has been to what is displayed in the exhibition.

Please help me in this regard, as what can be done to use both the vpn connection profile. Or what the use of AnyConnect disables client access?

Waiting for your help.

Thanks in advance.

Samrat.

"Anyconnect essentials" in your configuration command to disable all profiles without customer (as well as other features that require the Premium license).

Essentials and Premium are mutually exclusive as the performance of duties. You can have both installed licenses, but only use one or the other (and never both at once) in your running configuration.

Client SSL VPN Cisco or Cisco AnyConnect VPN Client

Hello

Maybe a simple question...

What is the main difference in this two customers?

That's when the AnyConnect Client preferred?

Hope someone can help clearing this out for me.

Best regards

Johan

The SSL VPN client is the legacy client used on the first ASA platforms and VPN concentrator. Customer SVC has since been replaced by AnyConnect. AnyConnect is the client recommended for new deployments ASA and IOS. AnyConnect is also the only client that supports 64-bit operating systems.

AnyConnect client can not access local network

Hello

I have a problem with the Cisco anyconnect. Once clients are connected they cannot access anything whatsoever, including their default gateway.

Pool of the VPN client is on the same subnet as the LAN (139.16.1.x/24). Local network clients can access DMZ, VPN clients can ping computers on the local network, but they cannot access the DMZ.

I guess that any rule providing that traffic is absent but I m new with Cisco ASA and I m totally lost. I read as much as I could on this topic, but I do not understand which rule is necessary.

Thank you very much in advance for your support.

ASA release 9.4 (1)
!
ciscoasa hostname
activate the encrypted password of WmlxhdtfAnw9XbcA
TA.qizy4R//ChqQH encrypted passwd
names of
mask 139.16.1.50 - 139.16.1.80 255.255.255.0 IP local pool Pool_139
!
interface GigabitEthernet1/1
nameif outside
security-level 0
192.168.1.100 IP address 255.255.255.0
!
interface GigabitEthernet1/2
nameif inside
security-level 100
IP 139.16.1.1 255.255.255.0
!
interface GigabitEthernet1/3
nameif DMZ
security-level 50
IP 172.16.1.1 255.255.255.0
!
interface GigabitEthernet1/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/5
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/6
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/7
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/8
Shutdown
No nameif
no level of security
no ip address
!
Management1/1 interface
management only
nameif management
security-level 100
11.11.11.11 IP address 255.255.255.0
!
passive FTP mode
network obj_any object
subnet 0.0.0.0 0.0.0.0
internal subnet object-
139.16.1.0 subnet 255.255.255.0
network dmz subnet object
subnet 172.16.1.0 255.255.255.0
wialon Server external ip network object
Home 192.168.1.132
wialon-Server network objects
Home 172.16.1.69
Wialon-service-TCP object service
destination tcp source between 1 65535 21999 20100 service range
Wialon-service-UDP object service
destination service udp source between 0 65535 21999 20100 range
network of the NETWORK_OBJ_139.16.1.0_25 object
subnet 139.16.1.0 255.255.255.128
outside_acl list extended access permit tcp any object wialon-Server eq www
outside_acl list extended access allowed object Wialon-service-TCP any wialon-server object
outside_acl list extended access allowed object Wialon-service-UDP any wialon-server object
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
management of MTU 1500
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source any any static destination NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 non-proxy-arp-search to itinerary
!
network obj_any object
dynamic NAT (all, outside) interface
internal subnet object-
NAT dynamic interface (indoor, outdoor)
wialon-Server network objects
NAT (DMZ, external) service wialon Server external ip static tcp www www
Access-group outside_acl in interface outside
Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
identity of the user by default-domain LOCAL
Enable http server
http 11.11.11.0 255.255.255.0 management
http 139.16.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
service sw-reset button
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
domain name full ciscoasa.srdongato.null
E-mail [email protected] / * /
name of the object CN = srdongato
Serial number
Proxy-loc-transmitter
Configure CRL
Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
registration auto
full domain name no
name of the object CN = 139.16.1.1, CN = ciscoasa
ASDM_LAUNCHER key pair
Configure CRL
trustpool crypto ca policy
string encryption ca ASDM_TrustPoint0 certificates
certificate 09836256
30820381 30820269 a0030201 02020409 83625630 0d06092a 864886f7 0d 010105
05003050 31123010 06035504 03130973 72646f6e 6761746f 313 has 3012 06035504
05130b4a a 41443139 32323033 34343024 06092, 86 01090216 17636973 4886f70d
636f6173 612e7372 646f6e67 61746f2e 6e756c6c 31353132 30353036 301e170d
5a170d32 33333535 35313230 32303633 3335355a 30503112 30100603 55040313
09737264 6f6e6761 30120603 55040513 31393232 30333434 0b4a4144 746f313a
2a 864886 30240609 f70d0109 6973636f 02161763 6173612e 7372646f 6e676174
6f2e6e75 6c6c3082 0122300d 06092 has 86 01010105 00038201 0f003082 4886f70d
010a 0282 010100d 2 295e679c 153e8b6a d3f6131d 8ea646e3 aa0a5fa9 20e49259
ca895563 7e818047 033a4e8f 57f619e9 fa93bfd5 6c44141f b0abf2c0 8b86334e
bac63f41 99e6d676 c689dcf7 080f2715 038a8e1b 694a00de 7124565e a1948f09
8dbeffab c7c8a028 741c5b10 d0ede5e9 599f38fe 5b88f678 4decdc4b b 353, 6708
cfa2fbce f58be06e 18feba56 4b2b04a1 77773ec6 5c58d2ed d7ca4f17 980f0353
138bfe65 1b1165e6 7b6f94bb ab4d4286 e900178c 147a6dba 2427f38e e225030f
0a66d1eb 5075c57e 6d77e5bb 247f5bc3 8d3530f0 49dedf2d 21a24b5f daa08d98
690183cf e82a6b8d 5e489956 c5eecdbc 7fc2365c b629a52b 126b51e2 18590ed5
c9da8503 a639f102 03010001 a3633061 300f0603 551d 1301 01ff0405 30030101
ff300e06 03551d0f 0101ff04 86301f06 04030201 23 04183016 80143468 03551d
dec79103 0a91b530 1ada7e47 7e27b16d 4186301d 0603551d 0e041604 143468de
c791030a 91b5301a da7e477e 27b16d41 86300d 86f70d01 01050500 06 092 a 8648
003cdb04 03820101 8ef5ed31 c05c684b ad2b0062 96bfd39a ecb0a3fe 547aebe5
14b753e7 89f55827 3d4e0aa8 b8674e45 80d4c023 8e99a7b4 0907d 347 060a2fe4
fa6e0c2f 3b9cd708 a539c09f 7022d2ee fb6e2cf6 82b0e861 a2839a71 1512b3ec
e28664e9 732270c 9 d1c679d9 1eaf2ad5 31c3ff97 09aae869 88677a3d b 007, 5699
ecb3032e 2dd0f74f 81f9a8fb 79f30809 723bbdbf dfef4154 5ad6b012 a8f37093
481fa678 b44b0290 23390036 042828f3 5eefdc43 ebe52d26 78934455 9b4234a9
4146 166e5adc b431f12f 8d0fbf16 46306228 731c bfeebc43 34 76984 d2e6ebbc
88ca120a 96838694 d4f32884 963e7385 987ec6b0 dfa28d49 05ba5fa8 641bcfc7
ff92ac3c 52
quit smoking
string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
Certificate 0 is 836256
308202cc a0030201 0202040a 0d06092a 83625630 864886f7 0d 010105 308201b 4
05003028 06035504 03130863 61736131 13301106 03550403 6973636f 3111300f
130a 3133 392e3136 2e312e31 31353132 30353036 35363236 5a170d32 301e170d
35313230 32303635 3632365a 30283111 55040313 08636973 636f6173 300f0603
61311330 11060355 0403130 3133392e 31362e31 2e313082 0122300d 06092 has 86
4886f70d 01010105 00038201 0f003082 010 has 0282 010100e7 a5c16e86 16c15a10
e018b868 bac7271a 30f1a3f8 ecb9c6b8 3ed4b1ad c9468f5e 287f2a7a 644f1496
c43a061e da927d09 a755b53e ed7c6a66 f2f1fb1e f944345c 86e08ce0 891c99b3
13101ab3 04963fad f91f987f 99f22a89 cd1e8c5a 5e4c026d 2cadd7b7 6620bbd1
b4a5135b 24ec886f fa061a06 dd536e96 1e483730 756c 4101 23f83a8d 944a7fbe
93c51d56 32ac0d17 ceb75f63 0ae24f07 f2c54e83 5b84ff00 16b0b899 c925c737
1765b 066 23 b 54645 bc419684 d09dd130 c1479949 68b0a779 df39b078 6fb0deb9
758b14c3 f0801faf f0ad60e1 a018ffba d769f867 3fe8e5fc 88ccc5b2 2319f5d4
617a78c4 74e7a64b 5c68276c 06ea57c1 d0ffce4b 358c4d02 03010001 300 d 0609
2a 864886 05050003 82010100 dff97c9f 4256fd47 8eb661fd d22ecea4 f70d0101
589eff09 958e01f1 a435a20e 5ed1cf19 af42e54d d61fc0ab cb2ee7ac 7fcb4513
1a44cc86 1e020d72 3a3f78d2 4 d 225177 857093d 9 f5fcf3c7 6e656d2b 54a0c522
f636b8cf 33c5ae34 ea340f32 85dff4c1 50165e7a e94de10b ced15752 0b3a76c1
2a50777b 20291106 a1a8a214 a 8 003716 680c15d4 ac3f7cc7 378f8f5f 38e3403f
f958c095 e549c8ed 4baf8cc5 bdcd230e 260754ea 953c3a4c eb01fef5 62b97e01
9f82ce6b f479dbdd 000c45af 8758b35f b4a958ee 32c4db3f 2ddc7385 dc05b0e3
78b609ba a9280841 2433ae87 5dd7a7c2 d5691068 1dc0eddc c23f99c5 3df8b1a5
aadbd82a 423f4ba8 563142bf 742771c 3
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
Telnet 139.16.1.0 255.255.255.0 inside
Telnet 11.11.11.0 255.255.255.0 management
Telnet timeout 5
without ssh stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 172.16.1.69 - DMZ 172.16.1.69
dhcpd dns 87.216.1.65 87.216.1.66 DMZ interface
dhcpd option 3 ip 172.16.1.1 DMZ interface
dhcpd enable DMZ
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
SSL-trust ASDM_Launcher_Access_TrustPoint_0 inside point
Trust ASDM_Launcher_Access_TrustPoint_0 inside the vpnlb-ip SSL-point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-3.1.12020-k9.pkg 1
AnyConnect profiles Wialon_client_profile disk0: / Wialon_client_profile.xml
AnyConnect enable
tunnel-group-list activate
Disable error recovery
internal GroupPolicy_Wialon group strategy
attributes of Group Policy GroupPolicy_Wialon
WINS server no
value of 192.168.1.1 DNS server
client ssl-VPN-tunnel-Protocol ikev2
by default no
WebVPN
AnyConnect value Wialon_client_profile type user profiles
dynamic-access-policy-registration DfltAccessPolicy
wialon_1 Wy2aFpAQTXQavfJD username encrypted password
wialon_2 4STJ9bvyWxOTxIyH encrypted password username
remote access to Wialon tunnel-group type
attributes global-tunnel-group Wialon
address pool Pool_139
Group Policy - by default-GroupPolicy_Wialon
tunnel-group Wialon webvpn-attributes
enable Wialon group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447ec315ae30818a98f705fb1bf3fd75

Hello

You don't have NAT exemption the DMZ network to the pool of VPN traffic.

Please try to add the following statement to run:
```
nat (DMZ,outside) 1  source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
```
Also please delete the existing instruction manual nat "non-proxy-arp" statement, because it can cause problems like you the ip subnet address pool is identical to that of the Interior of the network.
```
no nat (inside,outside) source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 no-proxy-arp route-lookup

nat (inside,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
```
Cordially Véronique

Two remote AnyConnect clients cannot get two voice via softphones?

We have a situation where two remote users of SSL VPNS cannot establish a voice call via softphones or cookie lync. They can both talk but I can't hear the other. Each user can call external or the office LAN without problems.

I'm under ASA version 9.1 (5) and v.3.1.05170 AnyConnect. Pretty basic config (purified) - any help would be appreciated!

# sh run
: Saved
:
ASA Version 9.1 (5)
!
host device name
something.com domain name
activate the encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
encrypted passwd
names of
General pool of local pool IP 10.x.x.x - 10.x.x.y
IP local pool pool-ops-TI 10.y.y.y - 10.y.y.z

interface GigabitEthernet0/0
nameif outside
security-level 0
IP x.x.x.x where x.x.x.x
!
interface GigabitEthernet0/1
description of the inside interface
nameif inside
security-level 100
IP address y.y.y.y y.y.y.y
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/6
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/7
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
Shutdown
No nameif
no level of security
no ip address
!
banner login ***********************************************************************
connection of the banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
connection of the banner is a computer network that is private and can be used only in direct
banner connection explicit owner. The owner reserves the right to
banner connection monitor use this network to ensure the security of networks and respond
banner connect on specific allegations of misuse. Use of this network must
the banner sign a consent to the monitoring of these or other purposes.
connection banner in addition, the owner reserves the right to consent to a valid
application of law banner connection to search the network for evidence of a crime
banner stored within the network connection.
banner login ***********************************************************************
banner asdm ***********************************************************************
asdm banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
asdm banner is a computer network that is private and can be used only in direct
banner asdm explicit owner. The owner reserves the right to
banner asdm monitor use this network to ensure the security of networks and respond
asdm banner of specific allegations of misuse. Use of this network must
banner asdm you consent to the monitoring of these or other purposes.
asdm banner in addition, the owner reserves the right to consent to a valid
application of law banner asdm to search the network for evidence of a crime
asdm banner stored within the network.
banner asdm ***********************************************************************
boot system Disk0: / asa915-smp - k8.bin
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT 1 Sun Mar 1 Sun Nov 02:00 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 192.168.0.0
Server name 192.168.0.0
something.com domain name
Local_LAN_Access list standard access allowed host 0.0.0.0
pager lines 24
Enable logging
timestamp of the record
exploitation forest-size of the buffer 40960
logging buffered stored notifications
logging trap notifications
record of the mistakes of history
notifications of logging asdm
logging - the id of the device hostname
logging inside 10.0.0.0 host
logging inside 10.0.0.0 host
Outside 1500 MTU
Within 1500 MTU
IP verify reverse path to the outside interface
IP verify reverse path inside interface
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any echo outdoors
ICMP allow any inaccessible outside
ICMP allow any inside
ASDM image disk0: / asdm - 721.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1
Route inside 10.0.0.0 255.0.0.0 y.y.y.y 1
Route inside 192.168.0.0 255.255.0.0 y.y.y.y 1
Route inside 0.0.0.0 0.0.0.0 y.y.y.y in tunnel
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
test_VPN card-attribute LDAP
name of the memberOf Group Policy map
map-value memberOf "CN = test VPN, OR = groups of VPN, OR = Groups, OU = company, DC =, DC =, DC = com" "test VPN".
dynamic-access-policy-registration DfltAccessPolicy
AAA-server test-deviceauth protocol ldap
Max - a attempts failed 5
AAA-server baird-deviceauth (inside) host 192.x.x.x
Server-port 636
LDAP-base-dn DC = x, DC =, DC = z
LDAP-scope subtree
LDAP-login-password
LDAP-connection-dn cn = b, OU = Service accounts, DC = x, DC =, DC = z
enable LDAP over ssl
microsoft server type
AAA-server test-rsa Protocol sdi
AAA-server test-rsa (inside) host
interval before attempt-3 new
AAA-server auth-ldap-tes ldap Protocol
AAA-server test-ldap-auth (inside) host
Server-port 636
LDAP-base-dn DC = country, DC = a, DC = com
LDAP-scope subtree
LDAP-login-password
LDAP-connection-dn CN = b, OU = Service accounts, DC = x, DC =, DC = z
enable LDAP over ssl
microsoft server type
LDAP-attribute-map test_VPN
identity of the user by default-domain LOCAL
the ssh LOCAL of baird-deviceauth console AAA authentication
HTTP authentication AAA console LOCAL baird-deviceauth
serial baird-deviceauth LOCAL console AAA authentication
Enable http server
http inside x.x.x.x y.y.y.y
HTTP 1.1.1.1 255.255.255.0 inside
redirect http outside 80
SNMP-server host inside x.x.x.x trap community version 2 c
SNMP server location
contact SNMP Server
SNMP-server community
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Server enable SNMP traps entity power cpu-temperature
Crypto ipsec pmtu aging infinite - the security association
Crypto ca trustpoint trustpoint-selfsigned-vpncso
registration auto
FQDN
name of the object CN =, O =, C =, St =, =.
key pair
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
Crypto ca trustpoint
Terminal registration
FQDN
name of the object CN = OR =, O =, C = St =, =.
key pair
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
Crypto ca trustpoint
Terminal registration
Configure CRL
trustpool crypto ca policy

Telnet timeout 5
SSH enable ibou
SSH stricthostkeycheck
x.x.x.x inside SSH
SSH timeout 30
SSH version 2
SSH group dh-Group1-sha1 key exchange
Console timeout 15
No vpn-addr-assign aaa
No dhcp vpn-addr-assign
No ipv6-vpn-addr-assign aaa
no local ipv6-vpn-addr-assign
no statistical access list - a threat detection
no statistical threat detection tcp-interception
NTP server 1.1.1.1 source inside
NTP server 2.2.2.2 source inside
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
AnyConnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 2
AnyConnect profiles baird-client-profile disk0: / customer-baird - profile .xml
AnyConnect enable
attributes of Group Policy DfltGrpPolicy
value of banner! ONLY AUTHORIZED USERS ARE ALLOWED TO CONNECT UNDER PENALTY OF LAW.
value of banner is a computer network that is private and can be used only in direct
banner value explicit owner. The owner reserves the right to
banner value monitor use this network to ensure the security of networks and respond
the value of the banner of the specific allegations of misuse. Use of this network must
value of the banner a consent to the monitoring of these or other purposes.
value of server DNS 1.1.1.1 2.2.2.2
VPN - connections 2
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy excludespecified
value of Split-tunnel-network-list Local_LAN_Access
something.com value by default-field
Split-dns value something.com, us.something.com
activate dns split-tunnel-all
the address value general-pool pools
WebVPN
use-smart-tunnel homepage
AnyConnect value dart modules, nam
AnyConnect value profiles baird-client-profile user type
AnyConnect ask flawless anyconnect
Group Policy 'test' internal
Group Policy attributes 'test '.
Split-tunnel-policy excludespecified
value of Split-tunnel-network-list Local_LAN_Access
activate dns split-tunnel-all
the address value it-ops-pool pools
internal testMacs group policy
attributes of the strategy of group testMacs
WINS server no
value of server DNS 1.1.1.1 2.2.2.2
client ssl-VPN-tunnel-Protocol
field default value xyz.com
username admin privilege 15 encrypted password
attributes global-tunnel-group DefaultRAGroup
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
management of the password password-expire-to-days 10
tunnel-group DefaultRAGroup webvpn-attributes
the aaa authentication certificate
attributes global-tunnel-group DefaultWEBVPNGroup
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
management of the password password-expire-to-days 10
tunnel-group DefaultWEBVPNGroup webvpn-attributes
the aaa authentication certificate
tunnel-group test remote access connection type
tunnel-group test-Connect General attributes
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
management of the password password-expire-to-days 10
tunnel-group test connection webvpn-attributes
the aaa authentication certificate
allow group-url http://abc.xyz.com
allow group-url https://abc.xyz.rwbaird.com
type tunnel-group testMacs remote access
tunnel-group testMacs General-attributes
test-rsa authentication-server-group
test-ldap-auth authorization-server-group
Group Policy - by default-testMacs
management of the password password-expire-to-days 10
use-set-name of the secondary-username-of-certificate
tunnel-group testMacs webvpn-attributes
allow group-url http://abc.xyz.com/macs
allow group-url https://abc.xyz.com/macs
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory 26
Subscribe to alert-group configuration periodic monthly 26
daily periodic subscribe to alert-group telemetry
Cryptochecksum:aa675139dc84529791f9aaba46eb17f9
: end

I confess that I have not read your config in detail, but a few tips:

-If you do split tunnel, don't forget to push a route for the entire pool VPN subnet or subnets of VPN clients

-Make sure you have the same-security-traffic permitted intra-interface

http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa81/command/ref/refg...

-If you use NAT, you must exclude such NAT inter-VPN-device traffic

-If you have ACLs (not shown) do not forget to leave your pool VPN subnet is talking to himself. Generally, it would be in the ACL entering the external interface.

at the end of the packet - trace is your friend.

NGP

Impossible to ping anyconnect Client IP de ASA

Hello world

I can't connect to cisco anyconenct fine no problem.

When connected I ping the SAA in interface and other subnets that are behind the ASA inside the interface from the PC connected through the VPN.

My only problem is that of ASA, I cannot ping IP of 10.0.0.5.

ASA1 # sh anyconnect vpn-sessiondb

Session type: AnyConnect

User name: anyconnect_user index: 54

Assigned IP: 10.0.0.5 Public IP address: 192.168.98.2

Protocol: AnyConnect-Parent-Tunnel SSL DTLS-Tunnel
License: AnyConnect Essentials
Encryption: AnyConnect-Parent: (1) no SSL Tunnel: (1) AES128 DTLS-Tunnel: (1) AES128
Hash: AnyConnect-Parent: (1) no SSL Tunnel: (1) SHA1 DTLS-Tunnel: SHA1 (1)
TX Bytes: 12318 bytes Rx: 73502
Group Policy: anyconnect_group
Tunnel of Group: anyconnect_connection_profile
Connect time: 23:21:28 MST Friday, March 7, 2014
Duration: 0 h: 34 m: 33 s
Inactivity: 0 h: 00 m: 00s
Result of the NAC: unknown
Map VLANS: VLAN n/a: no

I ping the switch connected to ASA inside interface

ASA1 # ping 10.0.0.2

Type to abort escape sequence.

Send 5, echoes ICMP 100 bytes to 10.0.0.2, time-out is 2 seconds:

!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = ms 04/01/10

I can ping from the ASA inside interface

ASA1 # ping 10.0.0.1 - ASA inside interface

Type to abort escape sequence.

Send 5, echoes ICMP 100 bytes to 10.0.0.1, time-out is 2 seconds:

!!!!!

Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/1 ms

ASA1 # ping 10.0.0.5

Type to abort escape sequence.

Send 5, echoes ICMP 100 bytes to 10.0.0.5, time-out is 2 seconds:

?????

Success rate is 0% (0/5)

ASA1 #.

Journal of the shows

March 7, 2014 23:00:52: % ASA-6-302020: built outgoing ICMP connection for 10.0.0.5/0(LOCAL\anyconnect_user faddr) gaddr laddr 192.168.1.171/1168 192.168.1.171/1168

March 7, 2014 23:01:02: % ASA-6-302021: connection of disassembly ICMP for faddr 10.0.0.5/0(LOCAL\anyconnect_user) gaddr laddr 192.168.1.171/1168 192.168.1.171/1168

Where IP 192.168.1.171 is ASA outside interface

Concerning

MAhesh

Hello Manu,

Have you tried to ping the network interior? Or the package from inside the source interface of the ASA? Remember, you should have some rules exemption nat for packets going through the VPN connection. That's how specify us which networks are allowed to join the VPN clients. If you ping without specify any interface the packet is going to come from the external interface, and probably this interface/subnet is not allowed through the VPN connection. Using split tunnel or tunnelall?

You can try to activate the management of access to the inside interface and the ping from the inside. These packages should hit the exemption nat rule and will be sent through the tunnel instead of the Internet.

These are the necessary commands:

To specify an interface as an interface of management only, enter the following command:
```
 hostname(config)# management access inside
```
Then, you could do an inside 10.0.0.5 ping to ping the ASA AnyConnect client.

Notes on the access management command:

If your VPN tunnel ends on an interface, but you want to manage the ASA by accessing a different interface, you can identify this interface as an interface for management access. For example, if you enter the ASA of the external interface, this feature allows you to connect inside the interface by using ASDM, SSH, Telnet or SNMP. or you can test inside the interface at the entrance to the external interface. Management is accessible by the following VPN tunnels types: client IPsec, the client AnyConnect SSL VPN and IPsec LAN-to-LAN.

Hope this helps,

Luis

AnyConnect VPN SSL

My org is currently in the middle to pass to a ssl vpn ipsec VPN.

I have setup where users can use the anyconnect client for VPN access and they can access internal servers or address, but are not able to access the internet.

What be the best solution toa would apply to get the fucntion of users to access external Web sites.

mask 4 .xx 255.255.255.0 IP local pool SSL 10.x.x4.xx - 10.x.x

Line 409: pool ip SSL

10.x.X4.XX - 10.x.x 4 .xx mask 255.255.255.0

Line 844: ssl trust-point ASDM_TrustPoint0 on the inside

Line 845: ssl trust-point ASDM_TrustPoint0 outside

: 860 vpn-tunnel-Protocol ssl-client online - clientless ssl

: 860 vpn-tunnel-Protocol ssl-client online - clientless ssl

Line 863: anyconnect ssl deflate compression

874 online: client vpn-tunnel-Protocol ssl-ssl-clientless ikev1

874 online: client vpn-tunnel-Protocol ssl-ssl-clientless ikev1

Line 917: client ssl vpn-tunnel-Protocol ikev1

Line 1072: SSL address pool

Line 1076: group policy - by default-SSL_VPN

Line 1077: SSLVPN webvpn-attributes tunnel-group

Line 1079: allow group-alias SSLVPN

Hello

have you also tried split tunneling?

A sample:

standard of tunnel access ASA5505 (config) # permit 192.168.1.0 list splitting 255.255.255.0

attributes of SSLClientPolicy strategy group ASA5505 (config) #.

split-tunnel-policy tunnelspecified ASA5505(config-Group-Policy) #.

ASA5505(config-Group-Policy) # split - tunnel - network - list value split tunnel

ASA5505(config-Group-Policy) # webvpn

ASA5505(config-Group-WebVPN) # svc ask flawless svc

ASA5505(config-Group-WebVPN) # svc Dungeon-Installer installed

ASA5505(config-Group-WebVPN) # time generate a new key 30 svc

ASA5505(config-Group-WebVPN) # svc generate a new method ssl key

BR

Hans-Jürgen Guenter

Differences and similarities between standard customer VPN and AnyConnect Client

I have the experience of using the Cisco VPN client and the configuration to the ASA

are with Crypto Maps and others to help establish what I consider 'normal VPN' tunnels.

I have (my company is a partner of Cisco) meeting with a client of perspective tomorrow to discuss FW and VPN solutions.

I'm trying to digest today, what are the other Options VPN.

ASDM shows 3 boxes under Setup > remote access VPN. The 3 options are (in this order):

Clientless SSL VPN Remote Access (using the Web browser) THAN THAT I UNDERSTAND

Remote access SSL VPN (using Cisco AnyConnect Client) what I DO NOT UNDERSTAND

Remote access IPsec VPN (using the Cisco VPN Client) THAN THAT I UNDERSTAND

Before you see these choices on the SAA, I felt that 'Remote access SSL VPN' using a Web browser. What is the AnyConnect Client, and what is a concrete example of when I would choose this option vs the other options VPN.

Thank you

Kevin

I enclose a photo of what I am referencing above in order to eliminate any confusion...

Kevin,

You should check what file you download.

For example, something like this:

.pkg is the installer for the SAA (flash memory) so that it can be pushed to clients over SSL connections

.msi is the executable file for the client operating system

Federico.

Cannot ping the Anyconnect client IP address to LAN

Hi guys,.

I have an old ASA5520 running 9.1 (6) 8 where I installed Anyconnect SSL split tunneling access:

See establishing group policy enforcement
attributes of Group Policy DfltGrpPolicy
VPN-tunnel-Protocol ikev1, ikev2 clientless ssl

lanwan-gp group policy internal
gp-lanwan group policy attributes
WINS server no
DNS server no
VPN - connections 1
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value lanwan-acl
by default no
WebVPN
AnyConnect value lanwan-profile user type profiles

permit for line lanwan-acl access-list 1 standard 172.16.0.0 255.254.0.0 (hitcnt = 48) 0xb5bbee32

Now I can ping, RDP, etc. of any VPN host connected to any destination within 172.16.0.0 255.254.0.0 range.

Here is my routing information:

See the road race
Route outside 0.0.0.0 0.0.0.0 69.77.43.1 1
Route inside 172.16.0.0 255.254.0.0 172.25.8.1 1

interface GigabitEthernet0/1
nameif inside
security-level 100
IP 172.25.8.4 255.255.254.0

But I can't ping any Anyconnect VPN client connected from my LAN.

See the establishment of performance ip local pool

mask IP local pool lanwan-pool 172.25.9.8 - 172.25.9.15 255.255.254.0

Here's the traceroute of LAN:

C:\Users\Florin>tracert d 172.25.9.10

Determination of the route to 172.25.9.10 with a maximum of 30 hops

1 1 ms<1 ms="" 1="" ms="">
2<1 ms="" *=""><1 ms="">
3 * the request exceeded.
4 * request timed out.

While the ASA routing table has good info:

show route | I have 69.77.43.1

S 172.25.9.10 255.255.255.255 [1/0] via 69.77.43.1, outdoors

Other things to mention:

-There is no other FW between LAN and the ASA

-There is no FW or NAT configured or enabled on this ASA(see her running nat and see the race group-access they return all two virgins).

-FW Windows on the Anyconnect workstation is disabled (the service is running). I also tested and able to ping to my workstation Anyconnect House of another device on the same network.

So, I'm left with two questions:

1. first a I do not understand: after reading some threads here, I added this line standard lanwan-acl access-list allowed 69.77.43.0 255.255.255.0

out of ping and tracert commands remains the same, but now I can RDP to the docking station VPN connected to any workstation LAN;

What happens here?

2. how can I do ICMP work after all? I also tried fixup protocol icmp and icmp Protocol Error Correction, still no luck

Thanks in advance,

Florin.

Hi Florin,

The entire production is clear enough for me

in debugging, you can see that traffic is constituent of the ASA

"Inside ICMP echo request: 172.17.35.71 outside: 172.25.9.9 ID = 22 seq = 14024 len = 32.

the SAA can be transferred on or can be a downfall for some reason unknow

can we have a wireshark capture on the vpn client to see if the icmp request is to reach the customer? I want to just isolate the problem of fw so that we can concentrate on the ASA rather than silly windows ;) fw

made the RDP Protocol for VPN client for you inside the LAN work?

run logging on ASA and ping and then inside to VPN client and the Coachman connects on the firewall, if ASA comes down the pkt it will appear in the log.

loggon en
debug logging in buffered memory

#sh logging buffere | in icmp

#Rohan

Disable the download Anyconnect client / turn off the url connection

Hello

Is there a way to disable the Anyconnect client download when you navigate to the anyconnect url? Or just make the connection of the url is not accessible
While users can still connect with their client anyconnect installed in the corporate network.

Thank you!

Dave.

You can't disable the download directly. This had been discussed several times here at least one CSC who also confirmed a case of TAC. Link.

A hack is that if your image Anyconnect is an older, users will never invited to be updated.

Re URL, you can turn off the alias that fill the drop-down list on the web portal, but also long as your have the SSL VPN service active, external interface of the ASA will be used toward the top of the login page to less than the default connection profile.

What is your reason for wanting to turn off in the first place? Perhaps there is another method to achieve what you want.

ASA5505 with 10 users. Need to connect 25 remote users with AnyConnect Client

Hello to everyone.

I ASA5505 with license 10 users. I need to connect 25 remote users via SSL VPN (in my case cisco Anyconnect client). So I have to buy the license more security (ASA5505-SEC-PL =) for more then 10 simultaneous VPN connections on Cisco ASA 5505. Fix?

And the main question. What I need to order the user getting up-to-date (for example ASA5505-SW-10-50 =, or ASA5505-SW-10-UL =) license for my device Cisco ASA5505 in order to have 25 connections of concurrent remote users without restriction for each remote user?

You need the license SecPlus for increased remote access users. But you don't need an extra user license if you still only up to 10 internal systems.

AnyConnect Client timeout

Sorry if this question has already been addressed in another thread. I looked and found nothing, so I post here.

We currently use the anyconnect client on of our ASA5520. The only question I have now is that the time-out is not

seem to work correctly. I have never disconnected Timeout Idle current group policy set to 30 minutes and customers

unless you disconnect manually.

At first, I thought that KeepAlive or DPD has some how this affects. But after testing, they seem not to be. It seems

that the timeout works everything simply. Anyone have any ideas of what I'm missing? Or the inactivity timeout function simply not work?

Thank you!

Jeff

I look at the idle time-out as inheritance characteristic due to the fact that modern operating systems is inherently chatty. If you run a sniffer on the AnyConnect AV and then let the PC for a few minutes, you can capture all kinds of packets to and from the client, even if you are not actively working on the PC. If your intention is to manage user sessions, you can set a max session. Once the maximum session time is reached, the user will be disconnected from the system. Users must then reconnect if they require a continuous network access. Dead Peer Detection is the mechanism used by the client or network to quickly detect a condition where the peer does not respond and the connection has failed. For example, in a perfect world, all users of AnyConnect will right-click on the icon and click on disconnect to gracefully disconnect the session. In reality, users might lose their connection to the Internet, on the eve of their PC when connected, etc.. Without DPD, head of network device will retain the now obsolete session information where the SSL client tries to reconnect. Needed manual intervention by an administrator to manually disconnect sessions. With DPD, the head can recognize the loss of conectivity to the customer and terminate the session information. DPD is a Hello and ACK process between client and server. If a series of Hello messages don't that would acknowledgment, the related session information are deleted from the client or server. It is maintained by SSL and is not connected to the network traffic related timeout.

Here are a few links for your reference. Please let me know if I can be more useful.

http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/SVC.html#wp1072975

http://www.Cisco.com/en/us/docs/security/ASA/asa80/configuration/guide/vpngrp.html#wp1134794

AnyConnect client... SSL vs. IPSec

Similar Questions

Maybe you are looking for