AnyConnect user using the user certificate authentication and LDAP authentication

Similar Questions

• Clients vpn AnyConnect and cisco using the same certificate

  Can use the same certificate on the ASA client Anyconnect and cisco vpn ikev1-2?

  John.

  The certificate is to identify a user/machine rather than the Protocol, then Yes, generally 'yes' you can use the same certificate for SSL/IKEv1/IKEv2 connections.

  What you need to take care of, it's that said certificate is fulliling Elements of the Protocol, for example implmentations IKEv2 is 'necessary' particular KU are defined and client-server-auth/auth EKU are defined on the certificates.

  M.

• Read the motor current by using the controller PXI-7350 and MID-7604

  I use the PXI-7350 controller and MID-7604 drive to run a motor drive.  I would like to be able to measure the motor current while moving the engines.  This measurement is possible?  If so, what commands are required to read the motor current?

  Hi Casey,.

  the 7604 can limit the current to a value that is selectable by the user and you can activate the current reduction if the axis is stopped, but there is no way to read the current engine. If you want to measure the motor current, you must do it with an external device, but due to the current chopping and multiphase, motor control stepper motors is not a trivial task. Micro step mode the current phase looks like a rough sinus with lots of harmonics signal, so you will need to do a true measure requiring RMS of expensive measurement equipment.

  Anyway. If you need to know the temperature of the motor you should better measure the temperature directly. The most inexpensive device OR do is the NI USB-TC01, but there are many other options available.

  Kind regards

  Jochen

• How to use the windows fax machine and how to open an administrator account?

  How use the windows fax machine, and how can I open an administrator account?

  Original title: activateadministratoraccount

  Hello

  Thanks for your posting in the Microsoft community

  Well, you can enable the administrator account hidden instead of an account

  You can make the win + r and write lusrmgr.msc in the start search box or in the command run and pressing ENTER. Or, you could open the computer by right clicking on computer management in the start menu and select manage.

  Expand System Tools > local users and groups > users.

  Right-click the administrator account, and then select "Set password".

  In the 'set password' click 'continue '.

  In the "set password" enter the password of the administrator twice, then click on 'Ok '.

  Then, activate the administrator account. Right click on the administrator account and select "Properties".

  n check the box "account is disabled". Click on the Ok"" button.

• Problem with update of a column by using the procedure of database and refreshing or put in value programmatically

  Dear all,

  I am a beginner in the ADF and am under Jdeveloper Studio Edition Version 12.2.1.0.0.

  I have a page that consists of two taskflows.

  First workflow has a fragment which is to have a table based on view object salespersons (not editable)

  Second task flow contains a form of ADF from the same view object Salespersons.

  As the user selecting a line in the table of the same record is displayed as no problem.

  Now, I have added two buttons Activate and Deactivate that is to change the status of the sales.

  I tried to use two ways an updated using the procedure of database and then put in value by programming and I have different questions with two of them:

  Now, here's the code of the Java bean for activation:

  Option A - the problem with this is the value of the column in the list (the first task rate displayed) is not synchronized

  and Activate and Deactivate buttons are not disabled and active properly.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  Links BindingContainer = getBindings();

  OperationBinding operationBinding;

  operationBinding = bindings.getOperationBinding ("changeSalespersonsStatus") (OperationBinding);

  operationBinding.getParamsMap () .put ("pId", vId.getValue ());

  operationBinding.getParamsMap () .put ("pStatus", "A");

  Object result = operationBinding.execute ();

  dcStatus.setValue ("A");

  } else {}

  return;

  }

  }

  Option B - the problem with this is that the value of input for status text appears in the Active form for all records in form regardless of its database.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  -no doubt this two lines are not needed here

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  dcStatus.setValue ("A");

  BindingContainer links = getBindings();

  OperationBinding operationBinding;

  the operationBinding = bindings.getOperationBinding("Commit") (OperationBinding);

  Object result = operationBinding.execute ();

  } else {}

  return;

  }

  }

  Here's the code from the Fragment of shape for used buttons.

  "< af:button text = 'Activate' id ="bActivate' icon="/icons/activate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonActivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= ' n '} ">"

  < af:showPopupBehavior popupId = "pActivate" / >

  < / af:button >

  "< af:button text = 'Disable' id = 'bDeactivate' icon="/icons/deactivate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonDeactivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= 'A'} ">"

  < af:showPopupBehavior popupId = "pDeactivate" / >

  < / af:button >

  Here's matching Popups for each of the buttons Activate and Deactivate.

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pActivate" >

  < af:dialog id = "dActivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmActivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to enable the seller?" id = "ol1" / >

  < / af:dialog >

  < / af:popup >

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pDeactivate" >

  < af:dialog id = "dDeactivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmDeactivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to disable the seller?" id = "ol2" / >

  < / af:dialog >

  < / af:popup >

  Thanks in advance.

  Best regards

  Arif Khadas

  If you bind components to a range of flow page bean. You must complete that it saves the State of the component longer than the life of the component.

  To change the value of the GET value of the component of the link layer and change it.

  In this way the changes are captured by the framework and you should see them.

  Timo

• Hai iam Amaladas from Chennai (India) iam Remote Sensing and GIS researcher here most people using the Google Earth application and five members using Iphone, we need a Google Earth app (India)

  Hai iam Amaladas from Chennai (India) iam Remote Sensing and GIS researcher here most people using the Google Earth application and five members using Iphone, we need an app (India) of Google Earth?

  https://www.Google.com/search?q=Google+Earth+app+India&ie=UTF-8&OE=UTF-8

• use restart from scratch using the option "ALT F10" and lose everything. Help, please!

  Whenever I try to connect my laptop, a screen invites me to do a repair of launch set-up. It goes through the motions for ten minutes and the screen turns white. The only way I can get at all is to restart all from scratch using the option "ALT F10" and lose everything. Any advice I would really appreciate.

  Hello

  1. Since when are you facing this problem?
  2. You did any recent changes?
  3. What version of Windows is installed on the computer?

  I suggest that you go into recovery options and try to perform system restore and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Otherwise, I suggest you to give us more information, so that we can better help you.

  It will be useful.

• Mac with bootcamp to format and reinstall windows, can I use the same cd key and product?

  I want to reformat my mac...

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  I want to reformat my mac with bootcamp and I want to reinstall windows. can I use the same cd key and product? or do I have to do something with the current activation? Windows will recognize that it is the same computer after I repartition it?

  If it worked the first time, there is no reason that it will not work the second time on the same computer, as long as the Windows 7 is a full version.

  If this is an upgrade version, you must have the qualifying OS installed and enabled before you upgrade and it will work.

• How to use the automatic configuration wizard and where can I FIND?

  How to use the automatic configuration wizard and where can I FIND?

  Hi TannySmedt,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

• You can use the x 86 version and the x 64 version on two different computers

  I have a key/installation of Windows 7, which can be used for installing the x 86 version or the x 64 version. Could I use the x 86 version and the x 64 version on two different computers?

  Hi hgcxngv,

  No - not at the same time.  A key is an installation by the license agreement (regardless of the size of bits).   Is excluding the special manufacturer or license multiple keys which normally applies to companies and I am sure that you would know if you had a since they would cost much more to buy and were more difficult to obtain (if you remember).

  You can install by using 32 bit on a computer and then uninstall it from this computer and install the 64-bit on the other or vice versa (although you'll probably need to use the help of phone to activate the second time since the automated process will most likely perceive it as an attempt to both facilities and reject and you will need manual for past this problem).

  The foregoing does not apply to OEM licenses that cannot be installed on computers with they came, live and die with this computer (even if the key would have worked on each version, perhaps in order to simplify things for the manufacturer).

  I hope this helps.

  Good luck!

  Kosh

• I use the first items 14 and tried "with instructions" make a black and white video with a special color. At first, I have to use the Darkred effect, but it has no effect. Other effects do not work. Can I get the desired effect?

  I use the first items 14 and tried "with instructions" make a black and white video with a special color. At first, I have to use the Darkred effect, but it has no effect. Other effects do not work. Can I get the desired effect?

  You mean the Edit guided for a video of Black & White with color Pop, right?

  If so, the program will be directed to the Hollywood Look effects Panel and black red effect.

  If this isn't what you are doing, please let us know where you find "instructions" there is no effect of dark red I know in the program.

• Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi carlottav39691716,

  Please see the following links:

  Error 43 - I can't download any adobe apps CC or creative cloud Manager

  Creative cloud, re-install-Dungeon error 43

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• I would like to cut out an object using the Quick Selection tool and drop the object into another image. Can anyone help

  I use background images and want to cut objects of other JPEG files using the Quick Selection tool and drop them in the background image. So if I have a banana and select the object, I need to copy the banana in the context on the other.

  Hope it makes sense.

  Gary

  Select the banana. Right click > copy layer. Move tool. Click and drag to the other file. Place on the image.

  GOLD: load history and banana in a stack (file > Scripts > load file in the stack). Select banana and layer for copy or create the layer mask.

  Benjamin

• I can't find a newer version of adobe flash player for ubuntu 14.04, I tried to use the apt version but it wouldn't work and I don't know how to use the tar.gz files and install, I think the current version to .deb

  I can't find a newer version of adobe flash player for ubuntu 14.04, I tried to use the apt version but it wouldn't work and I don't know how to use the tar.gz files and install, I think the current version to .deb

  Hi LF12,.

  The latest version of Flash Player for Linux is 11.2.202.400.  The current versions of Flash Player are displayed here http://www.adobe.com/software/flash/about/. The versions on the page are updated with each new version.

  --

  Maria

• Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?

  Facebook like button does not work, I used the widget of muse and created the facebook code. Anyone know how to make this work?

  Hi connally25,

  Here is a link to a video tutorial on how to add a Facebook button, please check if you have followed the same steps to add the video.

  http://TV.Adobe.com/watch/learn-Adobe-Muse-CC/adding-a-Facebook-like-button/

  If you followed the steps correctly and the button still does not; Here is a link to a forum thread which may help to solve the problem:

  Facebook follow Widget does not

  Concerning

  Sonam

• I used the trial version, ordered and installed before exhaling a version for teachers, unable to launch PS without serial number first. How tho do now?

  I used the trial version, ordered and installed before exhaling a version for teachers, unable to launch PS without serial number first. How tho do now?

  well, I try!