AnyConnects reconnection problem.

Similar Questions

• Reconnection problem drivers Ethenet IP

  Hello

  I was reading OR documents/messages about drivers Ethenet IP and I was wondering if the reconnection problem has been resolved? I use cRIO no PC.

  Here's the number that is assigned to the https://decibel.ni.com/content/docs/DOC-4065
  "Hello OR EtherNet IP users and administrators,

  I'm having a problem, which can be related to a bug in the Labview Ethernet IP driver.

  I have a PLC Controllogix running an electro/pneumatic/mechanical workstation which has also a LabView on a PC application, a data acquisition high speed and analysis. The symptom I do experience, it is that if I'm online with PLC and actively follow up and/or edit the PLC, then the station program is running, the communication between the PLC and the Labview PC via ethernet IP appears to hang. This requires a full cold boot of the PC to restore communications. Simply put on the Labview application re-does not establish the connection.

  If I'm not in line with the PLC, while the station is running, the communication is not blocking, or at least the frequency of occurrence is significantly reduced.

  I saw that there is a newer version of ethernet driver IP available, was this created to solve a specific problem? If so would upgrading to the new driver to fix my problem? Thank you! "

  Hi sticyfinger,

  This thread, I think that it is not final, it has been caused by bugs.

  Have you met these erroneous behaviors?

  I haven't seen such a question in the database well. I think you should go to 14.0 given that other patches.

• Anyconnect VPN problem

  Hello friends!

  I ve been trying to configure the anyconnect VPN, but I cannot generate the CA, probably I m doing wrong sothing.

  To be honest, I Don t know if the problem int this VPN is only what is missing, but is the only thing that I've seen what can be a problem.

  Someone knows how to generate the CA in the ASA?

  Hi Marcio,

  Please follow this link:

  https://supportforums.Cisco.com/document/12597006/how-configure-ASA-CA-s...

  Do you want authentication certificate based for Anyconnect users?

  I'm not sure we really need a CA in this case.

  You can try to check this third party link to configure the Anyconnect on SAA basic settings:

  http://www.petenetlive.com/kb/article/0000943

  Kind regards

  Aditya

  Please evaluate the useful messages.

• Quality of VoIP BOUNCING over AnyConnect VPN problems

  Hello:

  I'm in the middle of the conversion of our environment of VPN for remote access of the former client VPN Cisco AnyConnect (ver. 3.1.01065) VPN's IPSec. I have a number of beta-testers on the new AnyConnect VPN environment, and we have quality problems of intermittent VoIP (IP Communicator 8.5.3 on remote laptops) with the HQ VPN. While I realize that we miss the calls over the Internet, which is a network of 'better' and can not control the Inernet QoS, the special thing is the VoIP call on the former that ipsec VPN seems to work very well 99% of the time.

  I did a series of G.729 calls on the old client IPSec and customer AC, with the same laptop, using the same remote access connection. The "VPN server" for the IPSec VPN is an ASA5520 (8.0 (4)), on a connection of 100 Mbps with plenty of reserve, which runs also firewall services for an office of about 500 people and a small DMZ environment. The VPN server that is handling AnyConnect VPN is a new ASA5515-X (8.6 (1) 2), using the same channel of 100 Mbit/s Internet and running VPN services only. When you call running of tests on the old IPSec VPN, the jitter of appeal is pretty consistent, where jitter ave runs about 10 ms and jitter peak running 30-40ms. On the client ACTS, so that 'good' calls run about the same jitter as the old VPN, called the 'bad' (drops intermittent speaker, sometimes sounds 'mechanized'), which produce about 1 of evey 5 calls, run jitter ave to about 120-150ms and jitter of tip of 300-400 m for info, I don't see no packet loss to talk, just call jitter is through the roof. While in most cases, this could be written off as a "bad Internet connection", on the pretty old VPN tests prove a lot is not the issue.

  That said, anyone has an idea why the quality of calls is sometimes wrong via the AnyConnect VPN? Is there pest practices that I can work from, or any settings you can recommend? Thank you.

  Well, there are several things in our implementation that could help if possible, although I think you can open the case of the TAC, we saw some strange behaviors.

  Things to enable the audit side ASA/SSL:

  -DTLS - check if it is enabled and WORK (see the det filter name NAME_HERE anyconnect vpn-sessiondb)

  see if the packets are tunneled by the DTLS Protocol not TLS. The datagram transport is much better suited for performance.

  -Compression - so we see a lot of deployments with it enabled us say this as much as we can. Compression is for links to bandwidth low latency. In the modern internet, it should be used with caution.

  -check the ASP drop table on ASA (fall of claire asp, run the "show asp drop' rest and during the period of low performance monitor.)

  -additional recording "class... ssl connection. "can give you greater participation.

  -See the proto ssl_np - good starting point count

  the list goes on and.

  What is important to understand, is that the problem is with the traffic on the wire or from the use of SSL.

  Sniffer traces are essential.

  M.

• Reconnection problem PSE 5.0

  I have PSE 5.0 and I'm having a problem of reconnection of missing files.  When I click on these photos, he begins to search for files and even if the photos are there, he never reconnects and the images are unusable and cannot be opened or moved.  Help, please?

  GrizzlyKiller wrote:

  Thanks for your reply.  I already did and it cannot find the file.  The problem is that these photos are old and they are in the Photo Shop program.  There's no other place to find the files.  They were never downloaded directly from a camera to create a file in my libraries.  I try to get these in my libraries, but this problem prevents me to do.

  It's impossible. The photo must exist both on one of your hard drives. It can still exist on one of your hard drives, then I suggest that you search using Windows search.

  If Windows search is not, then the picture disappeared and you won't be able to use it in PSE5, or elsewhere. If Windows search find, then you can log in as explained Ken.

• Cisco Anyconnect access problem

  I configured Anyconnect VPN. I can connect to the VPN from outside successfully but can not ping on my server or map the shared folder.

  can someone take a look at the configuration of firewall and help out me.

  ASA 9.1 Version 2
  !
  hostname DASA2
  domain JDSYINGAA.com
  activate 8Ry2YjIyt7RRXU24 encrypted password
  names of
  mask 192.168.78.1 - 192.168.78.254 255.255.255.0 IP local pool Abe_VPN
  !
  interface GigabitEthernet0/0
  nameif inside
  security-level 100
  IP 192.168.10.1 255.255.255.0
  !
  interface GigabitEthernet0/1
  nameif outside
  security-level 0
  IP 13.15.13.60 255.255.255.0
  !
  interface GigabitEthernet0/2
  nameif DMZ
  security-level 10
  address 192.168.20.1 255.255.255.0
  !
  interface GigabitEthernet0/3
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/4
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface GigabitEthernet0/5
  Shutdown
  No nameif
  no level of security
  no ip address
  !
  interface Management0/0
  management only
  nameif management
  security-level 100
  192.168.5.1 IP address 255.255.255.0
  !
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS server-group DefaultDNS
  domain JDSYINGAA.com
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  network of the NETWORK_OBJ_192.168.78.0_24 object
  192.168.78.0 subnet 255.255.255.0
  object-group network
  object-network 192.168.10.0 255.255.255.0
  pager lines 24
  Enable logging
  asdm of logging of information
  management of MTU 1500
  Within 1500 MTU
  Outside 1500 MTU
  MTU 1500 DMZ
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  no permit-nonconnected arp
  NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.78.0_24 NETWORK_OBJ_192.168.78.0_24 non-proxy-arp-search to itinerary
  !
  NAT automatic interface after (indoor, outdoor) dynamic source
  Route outside 0.0.0.0 0.0.0.0 13.15.13.1 1
  Timeout xlate 03:00
  Pat-xlate timeout 0:00:30
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA-server JDSYINGAA.com Protocol nt
  AAA-server host 192.168.10.2 (inside) JDSYINGAA.com
  Timeout 5
  auth-JDSYINGAA.com NT domain controller
  identity of the user by default-domain LOCAL
  Enable http server
  http 192.168.5.0 255.255.255.0 management
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
  Crypto ipsec pmtu aging infinite - the security association
  Crypto ca trustpoint _SmartCallHome_ServerCA
  Configure CRL
  trustpool crypto ca policy
  Crypto ca certificate chain _SmartCallHome_ServerCA
  certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
  308204 4 a0030201 d 308205ec 0202106e cc7aa5a7 032009b 8 cebcf4e9 52d 49130
  010105 05003081 09060355 04061302 55533117 ca310b30 0d 864886f7 0d06092a
  30150603 55040 has 13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
  13165665 72695369 676e2054 72757374 204e6574 776f726b 313 has 3038 06035504
  0b 133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
  20617574 7a 656420 75736520 6f6e6c79 31453043 06035504 03133c 56 686f7269
  65726953 69676e20 436c 6173 73203320 5075626c 69632050 72696 72792043 61 d
  65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
  30303230 38303030 3030305a 170d 3230 30323037 32333539 35395a 30 81b5310b
  30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
  496e632e 311f301d 06035504 0b 131656 65726953 69676e20 54727573 74204e65
  74776f72 6b313b30 5465726d 20757365 20617420 73206f66 39060355 040b 1332
  68747470 7777772e 733a2f2f 76657269 7369676e 2e636f6d 2f727061 20286329
  302d 0603 55040313 26566572 69536967 61737320 33205365 6e20436c 3130312f
  63757265 20536572 76657220 20473330 82012230 0d06092a 864886f7 4341202d
  010101 05000382 010f0030 82010 0d has 02 b187841f 82010100 c20c45f5 bcab2597
  a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
  9c688b2e 957b899b 13cae234 34c1f35b f3497b62 d188786c 83488174 0253f9bc
  7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
  15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
  1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8 63cd
  18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
  4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
  81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 01 has 38201 02030100 df308201
  082b 0601 05050701 01042830 26302406 082 b 0601 db303406 05050730 01861868
  7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1 d 130101
  ff040830 02010030 70060355 b 200469 30673065 060, 6086 480186f8 1 d 060101ff
  45010717 03305630 2806082b 06010505 07020116 1 c 687474 70733a2f 2f777777
  2e766572 69736967 6e2e636f 6d2f6370 73302 has 06 082 b 0601 05050702 02301e1a
  1 c 687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
  03551d1f 042d302b 3029 has 027 a0258623 68747470 3a2f2f63 726c2e76 65726973
  69676e2e 636f6d2f 2d67352e 70636133 63726c 30 0e060355 1d0f0101 ff040403
  02010630 6d06082b 06010505 07010c 59305730 55160969 5da05b30 04 61305fa1
  6 d 616765 2f676966 3021301f 2b0e0302 30070605 1a04148f e5d31a86 ac8d8e6b
  c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
  69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
  1 b 311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301D 0603
  445 1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355 c 1604140d 551d0e04
  1 230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300 d 0609 d
  2a 864886 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80 f70d0101
  4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
  b2227055 d9203340 3307c 265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
  99 c 71928 8705 404167d 1 273aeddc 866d 24f78526 a2bed877 7d494aca 6decd018
  481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
  b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
  5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
  6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
  6c2527b9 deb78458 c61f381e a4c4cb66
  quit smoking
  Telnet timeout 5
  SSH timeout 5
  SSH group dh-Group1-sha1 key exchange
  Console timeout 0
  192.168.5.2 management - dhcpd addresses 192.168.5.254
  enable dhcpd management
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  allow inside
  allow outside
  AnyConnect essentials
  AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
  AnyConnect enable
  tunnel-group-list activate
  internal GroupPolicy_abeone_VPN group strategy
  attributes of Group Policy GroupPolicy_abeone_VPN
  WINS server no
  value of the DNS-server 192.168.10.2
  client ssl-VPN-tunnel-Protocol
  value by default-field JDSYINGAA.com
  username privilege 15 encrypted password /oETeAnGnysKS53o mt
  type tunnel-group Abe_VPN remote access
  attributes global-tunnel-group Abe_VPN
  address pool Abe_VPN
  Group Policy - by default-GroupPolicy_AJDSYINGAA_VPN
  tunnel-group Abe_VPN webvpn-attributes
  enable Abe_VPN group-alias
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  call-home service
  anonymous reporting remote call
  call-home
  contact-email-addr [email protected] / * /
  Profile of CiscoTAC-1
  http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
  email address of destination [email protected] / * /
  destination-mode http transport
  Subscribe to alert-group diagnosis
  Subscribe to alert-group environment
  Subscribe to alert-group 27 monthly periodic inventory
  Subscribe to alert-group configuration periodic monthly 27
  daily periodic subscribe to alert-group telemetry
  Cryptochecksum:d4a18e6096befdad7d4d7748bcd52ea1
  : end
  don't allow no asdm history

  -See more at: https://supportforums.cisco.com/discussion/12541931/anyconnect-vpn#sthas...

  Here is my work anyconnect lab configuration.
  I deleted the obsolete lines

  interface GigabitEthernet0
  nameif inside
  security-level 100
  IP 10.10.10.1 255.255.255.0
  !
  interface GigabitEthernet1
  nameif outside
  security-level 0
  IP 20.20.20.1 255.255.255.252
  !

  the object to the Interior-net network
  10.10.10.0 subnet 255.255.255.0
  object subnet anyconnect-
  172.16.0.0 subnet 255.255.255.0
  standard access list permits 10.10.10.0 SPLIT-TUNNEL 255.255.255.0

  IP local pool anyconnect-172.16.0.10 - 172.16.0.20 mask 255.255.255.0

  NAT (inside, outside) static source any any destination static anyconnect subnet subnet anyconnect non-proxy-arp-search to itinerary

  the object to the Interior-net network
  NAT dynamic interface (indoor, outdoor)

  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-3.1.05152-k9.pkg 1
  AnyConnect enable
  tunnel-group-list activate

  internal strategy of GP-PROFILE group
  GP-PROFILE group policy attributes
  value of server DNS 8.8.8.8
  Protocol-tunnel-VPN-client ssl clientless ssl
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value of SPLIT TUNNEL

  Auntie username attributes
  VPN-group-GP-PROFILE
  type of remote access service

  type TG-PROFILE tunnel-group remote access
  TG-PROFILE general-attributes tunnel-group
  anyconnect-pool address pool
  Group Policy - by default-GP-PROFILE
  TG-PROFILE webvpn-attributes tunnel-group
  enable TG-PROFILE Group-alias

  !
  class-map default_class
  match default-inspection-traffic
  !
  !
  Policy-map default_policy
  default_class class
  inspect the icmp
  !
  service-policy default_policy outside interface

• AnyConnect Configuration problem

  Hi people,

  I am configuring anyconnect for purposes of test on our corporate network.

  I have an ASA connection to a LAN with a class B network configured on interface inside and another network of class B on the external interface.

  the routing is configured to inside the network and works well, ena and to the external network, I put a default route pointing to a switch that is connected to our router BGP Corporate!

  I have configured the Anyconnect with all necessary and all policies, but I can't any guest to external network.

  The ASA does not record anything so I wonder if any attempt even arrive at all or not.

  I have not configured NATexemption as I assume that this is not necessary, because I do not have any nating on this unit.

  Here is my configuration:

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x (next hop switch)
  Inside x.x.0.0 255.255.0.0 route x.x.x.x 1

  Crypto ipsec pmtu aging infinite - the security association
  Crypto ca trustpoint ASDM_TrustPoint1
  registration auto
  name of the object CN = anyconnect-test
  Proxy-loc-transmitter
  Configure CRL
  trustpool crypto ca policy
  string encryption ca ASDM_TrustPoint1 certificates
  certificate a595f554

  WebVPN
  allow outside
  AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
  AnyConnect enable
  tunnel-group-list activate
  internal group anyconnect strategy
  attributes of the strategy group anyconnect
  client ssl-VPN-tunnel-Protocol
  Split-tunnel-policy tunnelall
  WebVPN
  AnyConnect Dungeon-Installer installed
  AnyConnect ask to activate default anyconnect timeout 10

  username xxxxxx encrypted password xxxxxxxxxxxxxx

  tunnel-group anyconnect type remote access
  tunnel-group anyconnect General attributes
  Connect-Net address pool
  strategy-group-by default anyconnect
  tunnel-group anyconnect webvpn-attributes
  allow group-alias anyconnect-test

  Any help would be appreciated.

  See you soon.

  Hello

  In this case, you need to resolve to see what it could be,

  Could you do the following:

  Allow the AnyConnect inside and try to connect from any inside the host of the IP address of the inside:

  WebVPN
  allow inside

  * If the user is able to connect from the inside, make sure that the VPN allowed Sysopt command is enabled:

  See the race all the sysopt

  No timewait sysopt connection
  Sysopt connection tcpmss 1380
  Sysopt connection tcpmss minimum 0
  Sysopt connection VPN - allowed--> is the one that counts
  Sysopt connection VPN-reclassify
  No sysopt preserve-vpn-stream connection
  no RADIUS secret ignore sysopt
  No outside sysopt noproxyarp
  No inside sysopt noproxyarp

  To use another port instead of 443:

  WebVPN

  port 4443--> this port is an example

  * Then try to access from the outside once again, if you are not in a position to ensure that the MTU on the external interface is 1400 or 1500

  * If the MTU is fine, go ahead and set up a capture on the external interface and a capture of fall as well, then we can see if the SAA is intercept traffic and a fall. If traffic isn't not being the ASA could be an ISP issue:

  Capture outdoors:

  capture of CAPE ip match host interface

  See the capture CAP--> appear on the CLI capture and show you if 443 443 TCP UDP packets receive ASA, and it will tell you if the ASA sends a response to the client

  type of projection to capture asp - file all the circular buffer

  See the drop shot | Inc. --> This will show if the ASA is declining by the session and also to give a reason.

  Note: If nothing is shown are of course the next hop IP address in front of the ASA (ISP), that it does not obstruct the ports.

  Please don't forget to rate and score as correct the helpful post!

  Let me know how it works and if extra help is needed!

  Kind regards

  David Castro

• AnyConnect Session Timeout issue

  We have some remote users that are not happy with the SSL Connect connection down after close their laptops or lose their wireless for once. I read this question and answer of a Cisco page and I was wondering where the session time-out setting is changed. It's on the network client, software map AnyConnect or ASA firewall?

  Thank you, Pat.

  Q. What is the AnyConnect reconnect behavior?

  A. AnyConnect will attempt to reconnect if the connection is interrupted. This behavior is not configurable and auto. As long as the session on the SAA is still valid, the session will resume if AnyConnect can restore the physical connection.

  Version 2.2 includes a roaming feature that allows AnyConnect reconnect after a sleep of PC. The client will continue to try indefinitely until the head told him he can't reconnect and the client will not immediately RIP into the tunnel when the system goes Standby/Hibernate implementation. For customers who don't want this feature, set the session timeout value low to prevent sleep or resume reconnects.

  And also, for the new AnyConnect profile changes take effect, you will need to reconnect your AnyConnect session if the new policy is pushed to the client.

• Lose Internet connection when the AnyConnect

  I can connect to Anyconnect without problem, but when I try to access any website I lose connection (Internet & VPN disconnected). I want to mention that when I use the host name for a Web site on the url bar as https://www.cisco.com it is when I am offline, but if I use the IP (https://23.218.112.172) directly I disconnected.

  Hello

  You have configured by the XML profile with the DNS name? You have an installed SSL certificate using the FULL domain name?

  Thank you

  David Castro,

• Intermittent hard drive looking for the light. White screen.

  My Pavillion Office refused to start today with light orange hard drive "will not blink" in the quick flicker even way while trying to start.  Its flashing for a longer period with a consistent pace of about one and a half seconds per blink.

  I removed the hard drive from the system one enslaved in another Pavilion and it worked fine, I reinstalled the memory of the original machine and reconnected problem persisted.

  I would appreciate any recommendations on the resolution of this grace.

  Thanks for the reply, but I solved this problem. A memmory in the system module has been damaged possible overload of dllhost.exe. I I removed the module and the system now boots normally.

• Cisco ASA with Microsoft CA but arrive CRL

  Hi all

  I'm going through the old VPN IPsec of Cisco AnyConnect VPN.  We want to keep two-factor authentication, so I install a Microsoft stand-alone certification authority (cannot use local ASA CA as we have two units of the SAA in failover).  MS it works very well, I delivered the of CA root certificate to the ASA and not issued certificates of the certification authority for client computers that connect using AnyConnect no problem.

  My problem is that everything I try I can not get the ASA to retrieve the Revocation list.  Many guides, I followed the State that you just add the CRL to the certificate root, then the SAA should pick this up by using the option "use CRL Distribution Point certificate."  I tried also manually add LDAP url and try recovery like that (although I don't know about the url I used) and I always get just "cannot retrieve or check the Revocation list.  Does anyone have any experience with this or know what I'm doing wrong?

  Thank you

  Rob

  You have the right URL in the certificate? I have seen so many times that the CDP has been incorrectly configured with only a host name instead of a FULL domain name that does not able to solve the modem-router VPN.

• Cannot open http

  Hello, I have an ASA 5510 with AnyConnect and AnyConnect Mobile licenses.

  Guests with a laptop can connect via AnyConnect without problems and can use all the resources of vpn.

  Customers with Android with AnyConnect client can connect to the VPN, but they can not load a Web page of internal web servers.

  They can to this cause of servers I can ping them.

  They get the error:

  -[403] query error (invalid)<-- if="" i="" try="" to="" access="" through="" the="" ip="" of="" the="" web="">

  -[404] not found<-- if="" i="" try="" to="" access="" through="" the="">

  Thanks for your help!

  What Android device are you using?  The Android device is able to access the http server when it connects to the wifi network?

  May be a compatibility problem between your Android device and the AnyConnect version.  Take a look at this:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect25/Android-user/guide/Android-acug.html

• Solved: LAN T500 connection constantly sinks

  Hello.

  I just bought a (used) T500 and installed Win7 (64 bit). It works great so far, except that it has some problems with our network at work. I already talked to our it guy, and he assured me, that my settings (IP address, Server DNS etc.) are all correct.

  The connection is not the real problem, this is the outfit of the connection. At irregular intervals (at the beginning, often after a few seconds or a few minutes later it lasts longer) the connection just drops. It is restored directly afterwards, as seen easily in the center of the network. But it takes some time, and this constant fall-restore-fall is a bit annoying, especially if you want to keep a permanent connection to a different workstation.

  WiFi instead of my parents and wide broadband (DSL) home work very well. I also tried to connect my laptop to various points of access to work, using different network cables, but no difference. In all cases, the laptop was powered by AC and the plan "a power optimal power source" chosen.

  Of course the latest drivers via Windows and the Lenovo system update are installed. There is no error message in Device Manager, or the ThinkVantage Productivity Center.

  So far, only two options come to mind:
  (a) it is a hardware error (e.g. loose contact) in the NIC (Intel 85267LM Gigabit), which means that I have to send the laptop for Lenovo. I still have the guarantee, but it might take some time until what I'll be back. But then, should not the connection broadband affected as well? At least the cables are connected to the same port.
  (b) it is a kind of software error. Maybe, I just forgot to check or uncheck a characteristic of Win7 (ours IT has not yet acquired so much experience with Win7). I already uninstalled "Access Connections" because I heard that in some cases (especially Wifi) it can collide with the standard windows programs. Once again with no results.

  So, if anyone here has a good idea (or need additional information) do not hesitate to say.

  Volker

  Hey Andy, sys3175.

  Thanks for your suggestions, but I just finally found the solution.

  In its obviousness, I dare hardly to admit it, but the perpetrator was founded the ethernet hub, I had to use due to the fact that our local network is always BNC and I have no card adapter for my laptop. For me there is to say that at the beginning I knew, too, but then ruled, because

  (a) my desktop pc worked fine with it, in a trial (although a test quite short at the beginning), and

  (b) I have connected my laptop to hub my colleague, who use it for more than a year (but with his pc) and still had the drop reconnection problem.

  So I assumed a problem with my laptop. But apparently

  (a) our desktop pc seems to be more tolerant on the quality of the connection as my laptop. Because when I have connected my pc and my laptop to my hub, and this time has worked with them all day, leaving the download of large amounts of data (> 1 GB), the pc indeed received "network cable unplugged" messages, but only two or three times, while the laptop has repeatedly its abandonment. And

  (b) hub my colleague seems to have the same problem as mine, because today I had the opportunity to connect my laptop to two other, different regional centers here at work and voila, stable connection.

  So the good news is, that, probably, everything is fine with my network card, the bad news, I have to get a new hub (not the easiest thing for the BNC and probably don't bother given the short remaining time here) or I have to live with the annoying dropouts.

  Sorry for the setting on the wrong path with the network card, but nevertheless thank you for your support.

• Cisco AnyConnect VPN Client maintains reconnection

  Hello

  We have recently installed an ASA5505 and activated the VPN access.

  Two of my colleagues have no problems connecting to the VPN using Cisco AnyConnect VPN Client, but I do.

  I am still disconnected after a few seconds with the message:

  "A VPN reconnect gave rise to different configuration settings. VPN network interface is to be reset. Applications using the private network may be required to restart. »

  Cisco AnyConnect VPN Client Version 2.5.2019

  I work with Windows 7 but the same thing happens when I try to connect using my computer that is running Windows Vista.

  My colleagues also using Win7

  I also tried to disable the Windows Firewall.

  Any help would be appreciated.

  Best regards

  Peter

  TAC has been able to solve the problem.   For webvpn mtu changed default from 1406 to 1200.

  Not sure why 2 other ASAs we work very well otherwise though!

  WebVPN
  SVC mtu 1200

• Problem of DNS with AnyConnect on SAA

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  Hello

  I have a problem with the local domain name resolution when connected via a VPN SSL using anyconnect.

  I've identified it is due to the fact that the assigned DHCP DNS is not by adding a domain suffix.

  I proved this by adding the local domain after the host name, I'm ping.

  On the the ASA5505 ASDM I ensured that the appropriate field is identified on the DNS, but this still does not work.

  Please could someone guide me in the right direction. It should be on the profile that is downloaded or a configuration that automatically adds the correct suffix when DNS queries are sent to the DNS server.

  Hi again,

  I just figured my DNS suffix name resolution problem and I thought I'd share my solution in case it helps you:

  • Connect to ASDM, select VPN remote access, expand access to the network (Client), highlight the group policies.
  • On the right, edit the group policy that you connect your remote users.
  • Screen that comes up, highlight the server on the left and then click on the small arrow to the right to display other editing options in group policy.
  • Fill in the default domain with your internal domain name (for example, mydomainname.local)
  • Click Ok to save and save config to Flash running.

  Test of reconnection to with a client AnyConnect and performing a ipconfig/all.

  For me, I can now see the suffix dns that I defined in the group policy and successfully, I can ping internal hosts by name.

  Good luck!