Anyone else had problems with active market CC does not download?

Similar Questions

• Anyone else had problems with the connection switched to the internet automatically? More details

  I had this problem since the first part of January 2011. I use a dial-up connection, I have windows vista home Premium 32 bit. I can click on the internet icon on my desktop what the little box that has a checkbox to automatically connect to the internet, the diallog which is supposed to have the name of the internet connection is empty, it tries even to compose, but he does not open the port to dial an outside line. All the time I have a tick on my tab internet connections dial options each time that a network connection is not present or always dial my connection default slot choose settings if you need to configure a proxy server for a connection, it will not work on one, I can manually connect using of these (one at a time) but every time I click on the internet icon does not recognize a connection already exists, I get this message telling me that I need to connect to the cause of the internet, I work in offline mode. Whenever I get that message I click on connect to go online then it trying to connect automatically by calling and then I get this message, it cannot establish a dial-up access and still it does not open the port to dial an outside line.

  I can connect manually using the same connection and put the check box on the never dial a connection under select parameters if you need to configure a proxy server for a connection on the connections to internet options tab and I don't have a problem connecting to the internet. I did a reset and set up a new connection and that didn't work either.

  The Connection Wizard recalled the correct information, it was not correct that then I would not use this same computer online now. The reason is that I am currently using the same computer that has the problem of not being able to connect to internet automatically online. This same computer that has the problem of not being able to connect to the internet automatically, it will connect manually using exactly the same ISP configuration by routing the connection in order to never establish a connection on the internet connections tab options, while I'm on dial upward, it is assumed to be always dial my default connection under choose settings If you need to configure a proxy server.

  I have windows Vista Home premium 32-bit with service pack 2

• Anyone else had problems with updates from April 12, 2011 Windows?

  Last week (April 12, 2011) the automatic updates prevented me from using my PC.  The display is automatically set on 800 x 640 and it froze just trying to connect.   I did a system restore and everything were very good. BUT My Network Magic Software kept reminding me that there is an update of Windows for my PC, I went to Windows Update and installed updates.   Everything was fine.  So today, I restarted my PC (I usually leave it all the time).  The same problem as the last weeks took place so I restored the system to before April 12.  Everything is fine now but... I have automatic updates and I need to update Windows when even then, I need to know what to do.  Which of the 17 update could give me the problem and why?   I have Windows XP Pro SP3.  Please help me.  I don't know where else turns to help you.

  I'm so glad you are done with your updates in April.

  IRO your display problem, suggest you post your question in the 'Performance and Maintenance' or 'Desktop and personalization' forums and let the experts there trying to help you.

  BTW, your application Norton's new? Maybe a month or two? What was your previous antivirus and if it was 'properly' uninstalled before the installation of Norton. Please include this information in your new message/question.

  Concerning

• Did anyone else had problems with the serial number below MyAdobe does not?

  Try to re - install CS4 to work on something, and when I downloaded the installer and unpacked, it rejected the serial number on my page MyAdobe to the CS4 Master collection. Is there another number somewhere I should be entered or something?

  IF you are sure that you download the correct suite, you must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are links to a page with options to help make contact:

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

  http://Adobe.LY/1aYjbSC

• Is anyone else having problems with the crop tool in LR6.

  Is anyone else having problems with the crop tool in LR6.
  My PC crashes sometimes when I use the crop tool in LR6. It seems fairly random, and I never had this problem in LR5.

  Have you tried to disable the GPU acceleration in Lightroom preferences?

• Anyone else having problems with registering for hotmail today?

  Hotmail

  Anyone else having problems with hotmail registration today.  I'm really p...d like I got problems for part of the day of yesterday too... not very reliable and very frustrating to say the least

  Hello DianneCarrington,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Hi Chaz,

  I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.

  Please answer these questions to get a better understanding of the issue.
  1 have changes made to your computer before this problem?
  2 shut down other applications while they are in use?
  3. do you get an error code?

  You can try these methods to check whether the problem is resolved.

  Method 1: Run the troubleshooter of app.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Open this link to launch the troubleshooter.

  Method 2: Update the application.

  Method 3: Reinstall the application.

  This link has the steps that you can follow to update and reinstall the application.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Feel free to use the forum for any other issue of Windows, you may have.

• Anyone else have problems with the unethical choice to use the word "updated"?

  Does anyone else have problems with choosing the unethical to use the word "update" when what is going on is an UPGRADE that requires of new licences and payment?

  "updates" don't involve payment, make "improvements".  Given that you posted in the forum of creative cloud, if you have a subscription paid and that you are asked to pay more than the cost of the subscription it is more likely a problem with your installation/account.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I have a problem with HP Flash that does not appear on my PC

  I have a few problems with HP Flash I do not know the * beep t. when I put in the other system, I mean Mac, it shows me and allows.

  but when I remove that put in another system it gives me just a response as it is connected when I go on my computer there is not availble Flash sign.

  I'll be back in fact once to the top of my Flash on Mac. When I got to that obtained in another system just Visible or disabled this system. Please someone who has the solution, in particular among providers of HP.

  WKhan wrote:

  I have a few problems with HP Flash I do not know the * beep t. when I put in the other system, I mean Mac, it shows me and allows.

  but when I remove that put in another system it gives me just a response as it is connected when I go on my computer there is not availble Flash sign.

  I'll be back in fact once to the top of my Flash on Mac. When I got to that obtained in another system just Visible or disabled this system. Please someone who has the solution, in particular among providers of HP.

  Hello

  Please provide more information: what is your computer and its operating system? I think

  (a) HP is not a product called Mac

  (b) HP has no any product called Flash.

  As a result, HP cannot be Provider Service of Flash on Mac computer.

  Kind regards.

• Is anyone else having problems with gMusic?

  My gMusic application worked fine, but now it doesn't work at all. Never. Does anyone else have this problem? I want to X 2 (which I LOVE) and Google game works fine on my phone, but the gMusic app will not work on the desire. He is used to, maybe up to a month or two ago. There is not a single song in my library that will play. I tried to uninstall and reinstall the application... no luck. I thought that maybe my files were corrupt, but as I said, it works very well on my phone, so I don't know what the deal is.

  I can't say for sure, but it could be a problem with the application itself however, I'd suggest a refresh on the system running if you don't have it already. Then reinstall the application.

  Refresh your PC without affecting your files

  If your PC does not perform as in the past, and you don't know why, you can refresh your PC without delete all of your personal files or change your settings.

   

• Does anyone else have problems with tasks dashing ACS box

  This is the second time that I applied a patch ACS to one of our boxes of ACS SE 1113 only to happen in an unusable state. Today, I applied patch level 4.1.4.13.7 4.1.4.13.11. I used the GUI to apply the hotfix. Now most of the services will not start. Restore does not work. It seems that he will again have to be reconfigured.

  I was wondering if anyone else has had this problem. Maybe I should have used the command line to apply the patch?

  Randy

  You must apply CSUpdate first, then the patch for 4.1.4.13.7

  Kind regards

  Prem

  Please rate if this can help!

• Is anyone else having problems with the tools of photoshop works do not at all?

  I've updated my photoshop CS6 for CC and now a bunch of my tools do not work. The dodge, Clone Stamp tool, and a few other tools do not work.
  Anyone else has this problem or knows how to fix? My application is updated.

  I tried to contact adobe and they have not responded.

  Thanks in advance.

  Hi alexisu,

  Greetings!

  Try resetting all the tools

  To reset a tool, you must first have the selected tool. Then Ctrl-click (Windows users: right click) the button tool preset in the Tool Options bar.

  

  When you click this button, you will see a small menu and you can select Tool Reset to reset the current tool to its default value or reset all tools to deliver all the tools to its default value. Once selected, the tool will act as the first time you have used it.

  

  Using this simple method to reset your tool with a single click, you can quickly remedy any situation where the tool does not correctly and to maintain the flow of creativity going.

  Concerning

  Jitendra

• is anyone else having problems with reading or a frequency to chashes?

  playback is bugs audio cuts out for no reason, it may or may not start charge ram reading where it was started or anywhere in between also... also problems with AE 'read' the files when the time comes to render. He had no problem while working with them, but when it comes to accidents rendering and error message indicates that it cannot read the file... it's not real complicated, either this is a quicktime animation HD codec. I liked the 2014 AE version, better it is more solid. !

  The corrections after effects CC 2015 (13.5.1) update is available, with great difficulty to previews and more: http://adobe.ly/1Il5JYe

• Anyone else have problems with Photoshop CC 2014 WIA?

  I tried to do a quick scan this morning and Photoshop wouldn't let me. Actually, just try to PS of accident causes. Every time. The report traces the problem to WIASupport.8li.

  I know that it is not the scanner because I managed to get my doc to scan perfectly via MS Paint, of all things. Of course, being x 64, PS 2014 don't introduce myself a TWAIN alternative, which makes this WIA that support a lot more important. I could be wrong, but I also don't remember having this problem with the latest v14 PS.

  My information system is the following:

  • APP: Photoshop CC v2014 (15.0.0.58)
  • MODULE FAILURE: WIASupport.8li (15.0.0.1)
  • OS: 8.1 Pro x 64 Windows (Update 1)
  • MATERIAL: Core i7 3930K, 16 GB RAM, GeForce GT630 (OEM) @1080 p, Canon Pixma MX432 Scanner

  As I said, I know that it is not the scanner. The scanner works fine in other applications. Simply not PS 2014. For any help or suggestion would be greatly appreciated. Thank you.

  ~ ~ Rob ~ ~

  I am also on Win x 64 Pro 8.1, and my scanner is a HP Envy all-in-one.

  HM, mine worked, but since you mentioned it I fooled with dialog boxes and I managed to cause Photoshop CC (2014) down: I tried to hit the button [Browse] to change the Destination folder.  Normally I don't change that and simply open the files into Photoshop directly, that always works.

  

  

  That's what I've seen connected:

  Log name: Application

  Source: Application error

  Date: 20/06/2014 22:31:37

  Event ID: 1000

  Task category: (100)

  Level: error

  Keywords: Classic

  User: n/a

  Computer: NoelC4

  Description:

  The failing application name: Photoshop.exe, version: 15.0.0.58, time stamp: 0x536b438e

  The failed module name: WIASupport.8li, version: 15.0.0.1, time stamp: 0x536b32c5

  Exception code: 0xc000041d

  Offset: 0x00000000000073db

  ID of the process failed: 0x3d24

  Start time of application vulnerabilities: 0x01cf8cf533ce0c8d

  The failing application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe

  Path of the failing module: C:\Program Files\Adobe\Adobe Photoshop CC 2014\Required\Plug-Ins\Automate\WIASupport.8li

  Report ID: 2aeef489-f8ec-11e3-82a5-1803734ec99c

  Faulting full name of the package:

  ID of the failed package-parent application:

  Good fishing.  I'll make sure that it is reported to Adobe.

  -Christmas