Anyone had problem with access to their musical application after upgrade to 9.2.1?

Similar Questions

• I had problems with access to most of the Web sites and I noticed that HTTPS is no longer, how do I make permanent HTTPS so I can access any Web site?

  I had problems with access to most of the Web sites and noticed that HTTPS no longer appears whenever I try to access a Web site. I can easily connect to my gmail and facebook account, but the problem is that when I click on a link on FB and gmail, I get the annoying message "refused to connect.

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site. The date and time on my laptop are both correct. I am currently using OS x 10.9.5.Please!

  How to address this issue, rather how to make HTTPS permanent so I can easily access any Web site.

  My guess is that you have a damaged or invalid certificate entry OS X KeyChain, but to directly answer this question, I would say that consider you something like HTTPS Everywhere. Note, it is not available for Safari. It is available directly through the Google Chrome browser extensions.

• anyone had problems with the Mac taken hostage by ransomeware?

  anyone had problems with the Mac taken hostage by ransomeware?

  Hey portogermano,

  I have not had problems yet, but I've heard that sort of ransomware is distributed through a program called Transmission.

  If you can, try to avoid this software!

  If you are installing applications from one other source other than the Mac App Store, make sure you can check the original source and always go to the site of real editors, so that you know that you are getting the real thing, not a bad software.

• Anyone had problems with being revoked serial numbers?

  I just bought a brand new "Mac Mini Server" and as well as that purchased the software 'Adobe CS6 Design Standard '.  It is NOT an upgrade, but rather a new installation.  When I inserted the disc and enter the serial number of the error message box came up saying the ' you entered the serial number has been revoked. "  After some research, I tried to save it through Adobe and entered the SN.  Yet once I arrived, "the code you entered is invalid.  I contacted support, gave them the serial number.  They say that the code is not generated by Adobe and invalid, that the code must be a 24 digit number.  (The number is given is a 24 digit number.)  However, Adobe has asked me to contact the seller for a serial number.

  My concern is this, the software was purchased on amazon.com and went to a third-party provider.  The provider is well-established, been in business for years, with very high rates of review.  The software I had seems to be good.  It has a code UPC Adobe complete label with a hologram of adobe within the label imprint and the number PN.  The seals on the package are original and do not appear to have been falsified.  The serial number is inside the package and could not be seen, unless it has been opened.

  Sorry for the long story but just wanted to know if anyone else had problems of this kind to prepare for a possible battle.  Thanks for any help you can be.

  That look to help in these forums people rarely return appearances to try to help others - which means that it is unlikely that anyone with a first hand experience with your problem will be around to answer - but you never know.  You're probably better off back to the seller and see if there will be a battle to worry or not.  If the seller is reliable that the opinion would make it seem that you should expect assistance rather than resistance.

  And do not hesitate to try to contact someone else in the Support from Adobe. Some people are not too well informed/useful than others and can provide erroneous information.

• Problems with two of my OPOS hardware after upgrade from XP to 7

  I have two HP rp5000 point of sale systems and I'm having a difficult time linking two of my OPOS hardware components.  My receipt printer, A794, even after installing the new drivers still is not recognized by the computer.  The other thing that doesn't connect also the HP Pole display, I think that it's an LD220.  I recently updated the OS from XP to 7 and that's when I had the problem with my computer, try to recognize them.  The pole display is USB and the USB printer to series.  Is there any firmware for the latter to try to make them work again?  I have download the firmware for the Pole display, but that didn't work either.  I don't think I saw one for the printer.   Any help would be useful.  Thank you.

  Npgwi2000, welcome to the forum.

  I'm sorry you have to do another post, but this is the Forum for the POS systems.  Experts it will be able to help with your problems.

• 120 all-in-One desire: analysis of the problems with envy 120 all-in-One after upgrading to Mac OS 10.12 (Sierra)?

  Hello world

  My operating system is Mac OS Sierra 10.12, but the drop of HP does not include yet - that's why the "other" operating system.

  I just upgraded my Mac to 10.12 Sierra, and I've also updated software from my desire to 120. I have also reinstalled the HP utility software on my Mac. And Yes, I restarted my Mac several times too.

  Now, the challenges:

  1 120 feel like in his screen it does not find my computer when I try to scan to the computer. As if he cannot see it, even if the two computers and 120 are on the same network. This problem is new and was held just after the upgrade from Mac OS.

  2. Furthermore, when I try to activate the scan on my Mac computer, an error message appears telling me to update my software HP (see screenshot), although I've done.

  If someone had the same problem, and if you have, how you go about it?

  Thank you.

  

  Hello

  HP software full functionality is not yet available for Sierra, as you mentioned the ysstem functioning is not yet.

  You can scan with the application of ICA Apple (Image Capture or sweepers & Scanners), as well as thorugh HP Easy Scan you will experience, however, some issues you described, as this behavior with the scanning of the façade, this is a known issue with the software that should be fully updated for Sierra soon, it should be available soon, assuming that during the next weeks to come...

  You can insall HP Easy Scan 1.6.1 below and check if you are able to scan from it:

  Note: If there is already a HP Easy Scan of a previous version icon in the Applications folder, remove and empty the tash first.

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_6_1.pkg

  Then, try to scan using HP Easy Scan and check if it works.

  If the front panel can now list your Mac, it probably, work if not to use the Scan on your Mac software for now.

  Kind regards

  Shloi

• Problem with the mapping of the keyboard after upgrading to Fusion 7

  Hello

  I noticed that the keyboard layout has changed in the comments after the upgrade to VMware Fusion version 6 to version 7, even if nothing has changed in the settings "Region and language" in comments Windows 7.  Keys that have changed are "------' with ' < ' and ' | ' with ' > ' everything is OK. The keyboard is configured in Italian

  All the world has noticed the same problem?

  Have you solved?

  Thanks in advance.

  The problem has been resolved by the technical support of vmware with a workaround. They know that the question on the keys is interchangeable in the VM after upgrade to Fusion 7.

  Their development team is currently working on this issue on the priority. This will be fixed in the next update.

  However, they have a work around for the problem of keyboard. Following the instructions below to map the key manually in VMware Fusion.

  : Note make a note of the interchangeable keys in Windows before you enable the mapping of the keys.

  1. click on VMware Fusion-> preferences-> keyboard & mouse-> mappings of keys

  2. make sure that 'Enable key mappings' is enabled

  3. click on '+' sign at the bottom

  4. press the key that you want to send from the text box Mac keyboard

  5. press the key you want to receive on the VM in text box

  Note: You can also use the combination of change, control, Option, command if necessary.

• problem with access to the image data after you have installed latest windows

  Hi, my name s mayur, I got the problem when I open my photos data, actuly I have a computer laptop sony vaio there and I m a photographer so usually I saved my data in my vista drive was slove, so I upgraded mwan Formate c drive and install windows 7 in there then when I cheack my image data in f drive I cant able to see the thuumbs when I open it in the windows image viewer He told me i dnt have the permission to access

  I did this solutions

  I changed my user to administrator - has not worked
  I changed the security settings and gives full control to user - does not work
  I've changed owner ship - does not work, I reinstalled vista - not worked
  I used hodden administrator - has not worked
  I have attached the HDD in the pc of windows genuen - has not worked
  I opened my hard drive under linux and not worked

  I am a hardware engineer also so can someone tell me what will be the reson when I cheak the propertese folder there are a few user (s16561613) with red qustion mark in the authenticated user, my laptop has a genuien windows and now I have installed the windows is not genuine and I dnt have the original windows. so is this problem related to the license... or is the problem of pricing to someone please help me... the security and

  Hello

  There will not be any support for a pirated copy of Windows. I suggest you install a genuine Windows 7 on the computer and test the issue. If you face the same problem let us know so that we can help you further.

  Reference:

  Windows Genuine

  http://Windows.Microsoft.com/en-us/Windows/genuine

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• Still having problems with my perpetual license Adobe CS6 after CC

  Hi everyone, I still have problems with my perpetual license Adobe CS6 after upgrade to CC and terminate my subscription. I did it in October, and of course he had regained all my applications CS6, making it unavailable. I was advised to uninstall my Adobe (CS6 and CC) software and then reinstall my CS6 collection here. I did and as it has helped my Photoshop, all my other apps still get the same dialog box, I received before; telling me to renew my subscription to the CC. It will not happen, all I want is work and back collection CS6. Any help would be appreciated.

  After uninistalling cc, you should vacuum by the use of the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer and then install cs6.

  you might try starting the vacuum now (to clean the cc) after installing cs6 to see if that helps.

  Open your problematic cs6 programs, and then click Help > activate.

• Is anyone having problems with their Apple Watch since the iOS 10 came to life?

  Is anyone having problems with their Apple Watch since the iOS 10 came to life?

  Hello

  If you have not already done so, it can also help update your Apple Watch to the latest version of the software:

  Update the software on your Apple Watch - Apple Support

• Anyone had problems, in the new BC Beta feature, add a web form to a page as a module?  I am able to access the form as normal, just can't seem to add to a page.

  Anyone had problems, in the new BC Beta feature, add a web form to a page as a module?  I am able to access the form as normal, just can't seem to add to a page.

  Is apparently is a problem of Google Chrome browser.  There is no problem in Firefox.  BC said they are working on a solution.

• Anyone having problems with effects after that put 5.0.3 update?

  Since the 5.0.3 update a few weeks ago, I had problems with adding an effect to a clip. It seems not to matter type (both are res HD, either a shot on a Canon 5 d Mark II or a .m2t file .mov from a camera of HD Sony HVR - Z5U with a registration unit of memory). I have been using the file types of the same cameras with CS5 since August without any rendering problem, by adding effects, playback, slow response time, etc. Now, it seems doubtful that PrPro can handle adding an effect to a clip.

  Before it would show changes to the effect on the video in real time, but now it takes several minutes for the small front wheel I can access PrPro again. By example, if I add a fast color corrector or levels and try to change only one attribute, it unfolds, crashes, and then finally updates. He plants not (unless I force quit), it just hangs. I tried with just Finder and open PrPRo, and it still occurs. Previously, I could launch Photoshop, Firefox, Chrome, Mail, Finder, * AND * Pro

  Nothing else is it slow (playing back non-rendus, while that rendered or book review), although any reading can be slow sometimes with effect. In addition, there doesn't seem to be picky to a certain video effect. I've done everything I can think of, returning Short or reinstall: log in as root, Pref delete, drives hard various small clips. Initially, working on a FW800 external drive, I have recently worked on internally to test clips, but apparently not to the disc material.

  The fact that everything worked fine before, I can't that assume it was the update. I have the same software on a similar but lesser model home with no problem, but the 5.0.3 update failed with the auto-update and I have not tried to install it manually, is still on 5.0.2.

  Anyone else having this trouble and short of reinstalling, you found a solution? Thank you.

  iMac 27 "(21" model of Home Basic) "

  Mac OS X

  10.6.5

  2.8 GHz Intel Core i7 (4 cores)

  8 GB RAM

  ATI Radeon HD 4850 512 MB

  Master Collection CS5

  > Is there documentation available online on how to revert to the previous version?

  Uninstall Premiere Pro. Then, reinstall without updates.

• Anyone having problems with the last Flash?

  Update of Flash and Java yesterday, and since then had problems with plugin container closure etc.

  Slowly began to disable add-on first and then this morning off Flash since Chrome was having a similar problem.

  No more problems and helped all add them we...

  Thoughts anyone?

  http://support.Mozilla.org/en-us/KB/reset-Firefox-easily-fix-most-problems

  Reset worked for me

• Windows 7. I recently had problems with loss of internet connection. When I have trouble Shooting, told me that impossible to find a driver.

  I have a desktop running Windows 7 PC.  I recently had problems with loss of internet connection.  When I have trouble Shooting, told me that impossible to find a driver.  The adapter does not appear in Device Manager.  Help!

  Hello

  Definitely looks like a problem with the network device. Check with sound
  Support, their books online, the drivers and ask in their forums (if any)
  on known problems. If there is a control of the device shipped with the system
  Manufacturer (manufacturer of motherboard for customized systems). If a device check separated
  with the support of its creator and other resources.

  You could also remove or disable the device and try a new add-on as one
  new card or device USD. None of those who are dear.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">