Anyone has a balun for multisim spice model?
Why is there no balun in the component library?
Thank you, if you have a.
David B
dbur,
A balun is essentially a specialized transformer model. As a good un bon resume summary of these types of baluns, please see this link:
http://www.Minicircuits.com/pages/BalunApplicationNote.htm
Since you can create an ideal transformer simply using sources controlled, attached is a balun 'Ruthroff' ideal, created from 2 ideal transformers (so it works in both directions) using the same technique.
Using the modellers of Multisim (in Multisim PowerPro) or by creating these transformers with realistic values, it is possible to create SPICE balun transformer models ' real' models. There are several previous messages which discussed the creation of models of processor to help you.
http://forums.NI.com/NI/board/message?board.ID=370&message.ID=568&query.ID=503517#M568
Kind regards
Pat Noonan
National Instruments
Tags: NI Software
Similar Questions
-
I find that whenever I'm trying to rename an invisible layer (in Photoshop CC 2015), Photoshop stops working. Apart from ensuring that a layer is visible before you rename it, Adobe (or anyone) has a solution for this? Thank you.
Hi df.studio,
Please reset the Photoshop preferences and try again.
Steps to follow:
To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"
Related link: functions of files preference, names and places. Photoshop CS5
If not, let us know error code related to the crash.
Go to the control panel
< event=""> Once that event viewer is open< click="" on="" windows=""><>
Search the last error and let us know the details and general information.
Let us know if it helps.
Kind regards
~ Mohit
-
Warnings of simulation for the SPICE model
Hello
When you use a template PSpice of an OpAmp AD8001AR of Analog Devices for an implementation of active filter, the simulator of the APLAC Trans gives me warnings below;
Simulation - NLN:AD8001AR #2
11:34:47 GBJT. Q1: RB<= 0,="" rb="" set="" to="">=>
11:34:47 GBJT_PNP. Q2: RB<= 0,="" rb="" set="" to="">=>
11:34:47 GBJT. Q3: RB<= 0,="" rb="" set="" to="">=>
11:34:47 GBJT_PNP. Q4: RB<= 0,="" rb="" set="" to="">=>
11:34:47 VCVS. EOS_s1: | R2 | must be greater than the minimum series, using R2 = 1e-006 Ohm resistance instead
11:34:47 VCVS. EREF_s2: | R2 | must be greater than the minimum series, using R2 = 1e-006 Ohm resistance instead
11:34:47 VCVS. EREF_s1: | R2 | must be greater than the minimum series, using R2 = 1e-006 Ohm resistance instead
11:34:47 VCVS. ECM. R2 | must be greater than the minimum series, using R2 = 1e-006 Ohm resistance instead
11:34:47 CCCS. FSY_s2: | R1 | must be greater than the minimum series, using R1 = 1e-006 Ohm resistance instead
11:34:47 CCCS. FSY_s1: | R1 | must be greater than the minimum series, using R1 = 1e-006 Ohm resistance insteadLooks like the Simulator to change resistance values in the model values non-null which I'm not sure will affect the simulated result. Someone can tell me if I should be concerned or not?
Thank you very much in advance!
Without a doubt, test the model. I joined a project that can help.
While it is generally true that 1uOhm of resistance should not make a difference in a 'real' circuit, you're dealing with a behavioural model. Modeling approach, the model may or may not be affected by small resistance added controlled sources. A few branches inside these models can conduct current kA, amplify tensions 1000 x, etc..
If the file has the extension .cir (i.e. import as a netlist PSpice and translated to the old format of netlist AWR), try to change the extension .sp, then import it a model HSPICE. If it works, it can behave better. Please see this chapter in our documentation for more information on importing cards: https://awrcorp.com/download/faq/english/docs/Users_Guide/importing_netlists.html
-
Import the SPICE model for transistor BJT BFP720F in Multisim
Hello
I'm trying to get the SPICE model for the BFP720F transistor provided by Infineon to work in Multisim.
I have attached the template as provided by the manufacturer.
If I import it as-is, I get error messages "invalid node identifier '<4>'" (I have translated that German, it might not be exactly this message in the English version).
So I tried to replace all the "<4>" with "4", which seems to help, but now the error is "adjusted temperature setting"VJC (PC)"negative" and "incorrect use of the parameters of the model. Now I don't really know what to do with it.
Is the template provided in the wrong format? I somehow can it in the right so I am able to use it?
Because I need for my project semester in College, any help would be much appreciated.
Thanks in advance!
Hi NikoNR,
When writing a detailed description of what I did exactly with the Wizard component, the component again to create in Multisim from scratch, I found that there are different SPICE models provided in the package for use with AWR MWO. They have a different file extension, but are normal text SPICE inside files.
It turns out that they actually work with Multisim. The difference is small, there is only one temperature (TNOM) setting that is absent in these models, distinct from the "general" I first tried to use. It seems that Multisim had a problem with this setting, leading to the error I encountered.
Anyway, the problem is solved now. Thanks for your help
Good day
(The now much happier) EE-student
----
Edit: I have attached the SPICE model, that I ended up using, in case someone at - he never met a similar problem. The only change I did this, is to replace '<4>' with '4' in the part of the diode (single occurrence here). I had to zip to download with his original extention (.mdl).
4>4>4>
-
My I Pad has gone completely dead. It is a version2model and just completely dead. Anyone has an explanation please! I turned on and off and the top (or at least gone through the process) charged no sign of life at all. ???
How long have you leave the charge for the iPad? It will take at least 30 minutes on the charger before an iPad with a completely dead battery react. Be sure to use the charger supplied with the iPad, or its equivalent. Do not recharge an iPad by connecting it to a USB port on the computer. After 30 minutes on the charger to reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.
If the unit still doesn't start not to make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.
-
Hello team,
Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?
Thanks for helpLookAtLAN network monitoring is one of these tools.
SuperScan is probably better, but I have not tried.
-
CF Bug database has been down for anyone else?
I tried to access the ColdFusion bug database to make a few suggestions, but the site has been down for almost a week now. Anyone else having this problem? I emptied my DNS cache and re-registers it.
What's weird is when I ping cfbugs.adobe.com, I get an IP address of 192.150.14.191 and she is resolved to a host name of mmbeta.macromedia.com
I also tried bugbase.adobe.com, but to no avail.
Try to clear your browser's cache and cookies for adobe.com. There is a known problem with redirection loops and cookies with the bugbase.
-Carl V.
-
Does anyone has found a fix for the update of VISTA KB275842 error 80070490?
Anyone found a fix for VISTA KB275842 error 80070490, or none of the solutions or help?
80070490 ERROR_NOT_FOUND
Corrupted system file
You will need to perform an upgrade on the spot or reinstalling the operating system.
Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
http://support.Microsoft.com/kb/929833>
`~`
If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt.
The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error.
To learn more about this tool, go to which is the analysis of system update tool? on the Windows website. http://support.Microsoft.com/kb/947821>
If the system update readiness tool solves the problem, you will need repair Windows.
Repair Windows will not damage your personal files or the programs that are installed on your computer.
Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD.
To repair Windows, follow these steps:
Close all programs and restart your computer.
Insert the Windows DVD into the drive of the computer. Wait for the installer to start. If the installation program does not start automatically, follow these steps:
Click Start and type Drive: \setup.exe in the search box, where drive is the letter of the DVD drive of your computer (for example, D:\setup.exe).
List programs, click Setup.exe.
Click on install now.
Click go online to get the latest updates for installation (recommended).
If you are prompted to do this, type the Windows product key.
What type of installation you want? window, click upgrade.
Once the installation is complete, restart your computer, and then run Windows Update.
`~`
I hope that's enough to put you on the right path for nºw.
Let us know how it works
ºut.Good luck
The current time and the date now in France is
22:04Tuesday, March 26, 2013
Central European time (CET) + 0100 UTCUTC/GMT is 21:04 Tuesday, March 26, 2013
Current weather conditions in ParisCloudy4 ° C / 39 ° F -
Does anyone has installed Windows 7 on a laptop Pavilion DV2175
If anyone has installed Windows 7 on a laptop Pavilion DV2175 and if so it is 32 or 64 bit
Hello:
There is an unofficial update guide to windows 7 for the series dv2000.
Given that the maximum amount of memory, that you can install on your laptop is only 2 GB, I'd go with W7 32 bit, as a 64 bit OS requires more memory and disk space to run a 32 bit OS only.
Not double, but more.
-
Hello OTN.
I don't understand why my sql query will pass by in the data model of the BI Publisher. I created a new data model, chose the data source and type of Standard SQL = SQL. I tried several databases and all the same error in BI Publisher, but the application works well in TOAD / SQL Developer. So, I think it might be something with my case so I'm tender hand to you to try and let me know if you get the same result as me.
The query is:
SELECT to_char (to_date ('15-' |)) TO_CHAR(:P_MONTH) | » -'|| (To_char(:P_YEAR), "YYYY-DD-MONTH") - 90, "YYYYMM") as yrmth FROM DUAL
Values of the variable:
: P_MONTH = APRIL
: P_YEAR = 2015
I tried multiple variations and not had much luck. Here are the other options I've tried:
WITH DATES AS
(
Select TO_NUMBER (decode (: P_MONTH, 'JANUARY', '01',))
'FEBRUARY', '02',.
'MARCH', '03'.
'APRIL', '04'
'MAY', '05'.
'JUNE', '06'.
'JULY', '07',.
'AUGUST', '08'.
'SEPTEMBER', '09'.
'OCTOBER', '10',.
'NOVEMBER', '11'.
"DECEMBER", "12."
'01')) as mth_nbr
of the double
)
SELECT to_char (to_date ('15-' |)) MTH_NBR | » -'|| (TO_CHAR(:P_YEAR), 'DD-MM-YYYY') - 90, "YYYYMM")
OF DATES
SELECT to_char (to_date ('15-' |: P_MONTH |)) » -'|| ((: P_YEAR, 'MONTH-DD-YYYY')-90, "YYYYMM") as yrmth FROM DUAL
I'm running out of ideas and I don't know why it does not work. If anyone has any suggestions or ideas, please let me know. I always mark answers correct and useful in my thread and I appreciate all your help.
Best regards
-Konrad
So I thought to it. It seems that there is a bug/lag between the guest screen that appears when you enter SQL in the data model and parameter values, to at model/value data.
Here's how I solved my problem.
I have created a new data model and first created all my settings required in the data model (including the default values without quotes, i.e. APRIL instead "Of APRIL") and then saved.
Then I stuck my sql query in the data model and when I clicked ok, I entered my string values in the message box with single quotes (i.e. "in APRIL' instead of APRIL)
After entering the values of string with single quotes in the dialog box, I was able to retrieve the columns in the data model and save.
In the data tab, is no longer, I had to enter the values in single quotes, but entered values normally instead, and the code worked.
It seems the box prompted to bind the values of the variables when the SQL text in a data model expects strings to be wrapped in single quotes, but no where else. It's a big headache for me, but I'm glad that I solved it, and I hope this can be of help to other institutions.
See you soon.
-
My Mac has 4 slots for memory, 2 slots hold 4 GB each. Can I add a 8 GB memory in each of the empty slots? I can add memory higher in the empty slots or what I need to keep all memory equals 4 slots 4 GB each?
It depends on what iMac you have. Some older models may not recognize 8 GB of memory chips.
-
I worked on the Web site of our Church and all of a sudden this week, my computer does not connect to the site. I get a message saying that the connection to the server was reset while the page is loading. Can anyone has any ideas on how I fix?
The error message "the connection was reset" can be caused by a bug for the attack of the BEAST fix (browser exploit against SSL/TLS) that the server does not support.
-
Windows 7 Upgrade Guide for dv6000/dv9000 models
Statement:
You use this guide at your own risk. I take no responsibility for any problem.
Things you need to know and do before the upgrade:
1 HP may require that reinstall you Vista back if you have hardware problems to solve the.
2 HP will not help you if you have software problems because these models are not officially supported
with Windows 7.
3. before you upgrade to Windows 7 will make it please Vista Recovery CD/DVD. How all the information here.
4. all drivers Vista and software preinstalled by HP for your model are in the folder in C:\swsetup .
If you still have on your HARD drive, then copy this folder on a CD/DVD. You may need them one day.
5 users with nVidia graphics card should check the temperature of this device before upgrading.
In this way you will know is it works fine under Windows 7 also.
How you can check your laptop CPU (processor), the GPU (graphics card), the motherboard or HARD drive temperature?
To do this use HWMonitor (free and recommended) or Aida64.
How do you know what model you have and the specifications for it:
1. click on the Support & drivers link. (The upper part of this page).
2. in the search box, type your computer laptop product (p/n) number.
Resources:
3. under a portable computer image, you will find the name of your laptop model (example: HP Pavilion dv6205eu notebook PC).
4. on the same page, click on Product Information -> specifications and you will find all the information on
your little laptop.
How to install Windows 7 and what you need to know during the upgrade:
1 guide: How to do a clean Windows 7 install
2. all drivers for Windows 7, you will find in the next post below.
3. some drivers have comment while they are initially made for Vista system.
During normal installation will fail, and then try to run the file unsuccessfully installed in Compatibility Mode (Windows Vista,
Windows Vista Service Pack 1 and Windows Vista Service Pack 2).
Resources:
Make older programs in this version of Windows
How to run a program in Compatibility Mode in Windows 7
CHIPSET DRIVERS
Solution on COPROCESSOR with yellow exclamation mark ()
If you have Intel processor:
Intel chipset (Install and reboot before other drivers) here (version 9.1.1.1025 for 32/64-bit Win7)
Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64-bit Win7)
If you have an AMD processor:
For models dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):
nVidia Chipset (Install and reboot before other drivers) here (Vista)
For models dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):
nVidia Chipset (Install and reboot before other drivers) here (Vista)
Important information for users with nVidia chipset!
If you have 4 GB RAM or more, then read the article Microsoft Knowledge base on the solution of certain problems that you may have here.
GRAPHICS DRIVERS
Intel graphics:
Inte l 950 and Intel X 3100 here (version 15.12.75.4.1930 for Win7 32 bit) or here (version 15.12.75.4.1930 for Win7 64 bit)
nVidia Chart:
Important information!
If you have installed all the drivers for graphics card nVidia, then until you install the other version will be
you will first need to remove the old drivers. Check below how guide (that there is no standard uninstaller
( process):
How to remove drivers Windows system nVidia graphics.
Drivers:
nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS:
OPTION 1
267.76 version here for Windows 7 32 bit or here for Windows 7 64-bit.
OPTION 2
Version 197.16 here for Windows 7 32 bit or here for Windows 7 64-bit.
Note:
Don't forget to first uninstall previous graphics driver.
nVidia GeForce GO 6150 M, 7150 M, 7200 M, 7400 M or M 7600:
OPTION 1
First try installing the Vista drivers for your model.
Resources:
How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?
OPTION 2
If the drivers will not work so try modded drivers worm 195.81.
Note:
Don't forget to first uninstall previous graphics driver.
How to install Windows 7?
1. download driver here (for 32-bit Win7) or here (for Win7 64 bit) double click and select extract,
2 download from this site with the drivers also modified INF and replace original INF in extracted folder,.
3 install and reboot.
OPTION 3
Last thing you can do is install graphic driver from Windows Update.
Note:
Don't forget to first uninstall previous graphics driver.
1.open Windows Update by clicking on the button start , clicking on " all programs " and then clicking on '
Windows Update '.
2in the left pane, click " check for updates " and then wait while Windows searches the latest updates
for your computer.
3select the " optional updates " and install from there only driver for your graphics card.
AUDIO DRIVERS
Conexant HD Audio
Use the Vista drivers for your model.
Resources:
How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?
Realtek HD Audio
Use the Vista drivers for your model.
Resources:
How to find all the drivers audio and graphics of Vista for a specific model on the HP sites?
If the Vista drivers won't work well for you then try to use Realtek official a of here (32/64 bit Win7).
"" When you enter this link check it 'I accept the foregoing." and after that click on the " Next " button.
MODEM DRIVERS
Conexant Modem here (A worm 7.61.0.0) (Vista) - If you have the sound card Conexant
Motorola SM56 modem here (ver6.12.6.0 A) (Vista) - If you have the Realtek audio card
HP QUICK PLAY
HP QuickPlay here (ver 3.7 v.6112 for 32/64-bit Win7)
Notes:
- It must be installed before HP Quick Launch Buttons.
- You have installed this software and it crashes when you use?
Uninstall your current version of HP QUICK PLAY and install what you had in Vista.
Resources:
Uninstall software in Windows 7
Uninstall or change a program in Windows 7
If you've burned CD/DVD with C:\swsetup folder as proposed in the guide then you will find it.
HP Quick Launch buttons
Solution on KEYBOARD FILTER with yellow exclamation mark ()
HP Quick Launch buttons here (ver 6.50.13.1 for 32/64-bit Win7)
WIRELESS DRIVERS
Intel Wireless here (ver 13.0.0.107 for 32/64-bit Win7)
Broadcom wireless here (ver 5.60.48.35 for 32/64-bit Win7)
Atheros Wireless here (ver 8.0.0.316 for 32/64-bit Win7)
HP wireless Assistant here (ver 3.50.12.1 for 32/64-bit Win7)
Bluetooth wireless here (ver 6.5.0.2000 for 32/64-bit Win7) only for models with Bluetooth.
Note:
How to install the Bluetooth driver?
Click on the link below:
How to install the driver Bluetooth HP Windows 7.
ETHERNET DRIVERS
LAN Realtek RTL8101 here (for 32/64-bit Win7) only for models with Intel processor.
Models with AMD processors need not install any additional Ethernet file, because the drivers for it are in the chipset package.
CARD READER
Solution on BASE SYSTEM DEVICE with yellow exclamation mark ()
Ricoh 5 - 1 card reader driver here (ver 6.10.01.03 for 32/64-bit Win7)
TOUCHPAD DRIVER
Synaptics TouchPad here (ver 16.0.1.0 for 32/64-bit Win7)
Note:
Default is activated the scroll two - finger. If you want to use only one finger to scroll, check out the link below:
How to change two - finger scrolling on One - Finger scrolling in Synaptics TouchPad software.
ONLY IF YOUR MODEL: WEBCAM
CyberLink YouCam here (ver 2.0.3115 for 32/64-bit Win7)
Note:
If you have a problem with your webcam, check below links to HP documents:
Test a Webcam using your favorite Instant Messaging
3VRX (optional software)
on the screen the images and associated sounds that are displayed and heard when volume control
3VRX here (version 2.5 for 32/64-bit Win7)
Note:
Here is YouTube video that shows what you can do with this software.
ONLY IF YOUR MODEL HAS: FINGERPRINTS READER
1. uninstall all software and previous fingerprint reader drivers
Check below how guide (only it's non-standard uninstall process):
How do I uninstall the driver and the AuthenTec fingerprint software
2 you can install now correct fingeprint reader driver and software.
There are two apps that are available on this device:
- AuthenTec TrueSuite
and
-DigitalPersona Personal (recommended).
Information on how to install the software you will find below guides:
AuthenTec TrueSuite, fingerprint AuthenTec and Windows 7
DigitalPersona Personal fingerprint AuthenTec and Windows 7
ONLY IF YOUR MODEL: DVD PLAYER WITH LIGHTSCRIBE
How can you check is your DVD with Lightscribe drive?
The Panel of DVD, there will be a Lightscribe logo.
LightScribe Host software [Link removed - Site is no longer available] (worm 1.18.22.2 for 32/64-bit Win7)
Report of the changes that have been made in the guide
Edited the 16/01/2010 updated Synaptics TouchPad driver to ver 14.0.3.1, update Broadcom driver to ver 5.60.18.41
Edited the 18/01/2010 updated nVidia Graphic article. Adding drivers for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (version 195.62)
Published the 19/01/2010 updated LightScribe software 1.18.10.2 worm host
Edited drivers fingerprints of 02/05/2010 update, software and added guides to fingerprints.
Published the 2010-02-27 updated LightScribe Host at worm 1.18.11.1 software
Published the 03/03/2010 update HP Quick Launch Buttons to worm 6.50.13.1
Published the 03/20/2010 updated Synaptics TouchPad to worm 15.0.9.0 (this version allows multitouch gestures)
Published two guides added 21/03/2010. How to remove drivers Windows system nVidia graphics and how to install the HP Bluetooth driver in
Windows 7.
Published the 03/25/2010 updated LightScribe Host at worm 1.18.12.1 software
Changed name Intel Matrix Storage Manager published 26/03/2010 to the Intel Rapid Storage Technology technology, has added Intel Rapid Storage Technology
worm 9.6.0.1014
Published on 31/03/2010 update nVidia graphics with uninstall guide section, updated drivers for nVidia GeForce 8400 M GS and 8600 M GS
worm 197.16
Published the 04/10/2010 updated LightScribe Host at worm 1.18.13.1 software
Published the 05/04/2010 updated LightScribe Host at worm 1.18.14.1 software
Published the 05/05/2010 updated Synaptics TouchPad driver to ver 15.0.13.0, updated HP QuickPlay for ver 3.7 v.6112
Published 21/05/2010 Update for ver 5.60.48.35 Bradcom, Atheros wireless to worm 8.0.0.316 update, update Synaptics touchpad wireless
15.0.13.3 worm
Edited the 24/05/2010 update HP Wireless Assistant to worm 3.50.11.2
Edited the 24/06/2010 updated Synaptics TouchPad to worm 15.0.17.4
Published 30/07/2010 update Broadcom wireless - the same version but with a few improvements, HP Wireless Assistant updated to ver 3.50.12.1
Added drivers published 04/01/2011 for nVidia GeForce 8400 M GS and nVidia GeForce 8600 M GS (ver. 267.76)
Published the 04/02/2011 update software LightScribe Host at worm 1.18.22.2, added a guide: how to change two - finger scrolling on One - Finger
Scrolling in Synaptics TouchPad software.
Published driver update 12/14/2011 for technology Intel® Rapid Storage Technology
Published 05/07/2012 updated driver for HP Bluetooth worm 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, updated guide: how to install
Driver HP Bluetooth Windows 7
-
I need a driver for sony walkman model # NWZ - E463.
I need a driver for sony walkman model # NWZ - E463. Can anyone help.i do not available for download. appreciate any help. Thank you, Bob
Which driver? You plug the USB cable and it shows up as an external drive - computer should recognize pretty good right now. Then, you use the software that came with it (Media Go) or Windows Media Player, iTunes or what and send your music files to it. You can even drag and drop MP3 files into the music using Windows Explorer folder.
-
Does anyone has installed Aperture 2 in El Capitan?
My new iMac 27 "end 2015 came with 10.11.1. I tried to install Aperture 2 (yes I know it's old and redundant, but that's what I have and I need to fix some stuff before moving to a new platform) and it failed - with a message found no software to install.
I've updated to 10.11.3 and it's the same thing. Then, I tried to do a custom install and unchecked the peaks of the sample. Then I got a message saying that the software was not compatible and install it could damage the system operating - but with a button that would allow me to go ahead and install it anyway. Call me a coward, but I did this.
Does anyone has installed Aperture 2 with 10.11.3? How at - it go?
Thank you!
Do you have open on your MacBook Pro, if so what version it is, and is it registered with your apple ID in the App Store.
Trying to transfer to your iMac, drag and drop it into the Applications folder.
Now, open the App Store (make sure that you are connected), see if you get a notification for an Aperture update, (only 3.6.1 works on El Cap)
If you do not get a notification, then you will be able to update Aperture 3.6.1.
What you need to do is move do not delete opening that you copied to the trash.
Restart the App Store and see if you are able to download this new version of Aperture.
If you want more tips on using Aperture, you should ask a question on the opening forum.
Maybe you are looking for
-
Define 'Responsive Design View' as a default view
Is there a way to define "Responsive Design View" as a view by default whenever I open a page? Thanks in advance.
-
Admin or power on the HP Envy Beats edition, model 6-1019tx pass
tried to reset the laptop, obviously done something wrong, now I'm locked out
-
I bought my laptop almost 2 years ago were using it with minor problems until this week. First of all, I use cd cases to raise the portable table, because in the last 6 months fan started working more than usual. But this week it started to freeze, w
-
HP G62 - 220CA: afer white screen 15 mts on battery
Laptop HP G62 - 220-CAWhen on battery power 80% (new battery) my screen turns off after changing the amount of times (10 mts, mts 20, 30 mts etc.). The power led lights up. By pushing the Start button / stop, Exc key, enter the key or moving the mous
-
Can not find the driver for Deskjet 4180 with the new MacBook Pro and OSX10.9.4
I can only find 4100 series that does not install. Ideas?