Anyone having problems with Windows 7 and the HP LaserJet P2035n?

Similar Questions

• Problem with Windows Explorer and the recorded files

  When I save files from the internet and then open the folder with Windows Explorer in the backed up files, I find that WE consider not save them on my hard drive "change" more. I know it's strange, but I tend to retain files roughly in the order that I saved them, rather than by the name of the file or anything else. So now to manually change the files in a certain way, then save them to get them organized as I want. Of course, this can become very painful and long if I have a lot of files to organize this way. My question is: How can I get Windows to consider saving a file on my HDD as change? I use Firefox and updated recently, which may be the cause of the problem.

  Hi Flingle,

  Were you able to save and access files correctly before you update Firefox?

  You can create a new folder & try to download the file inside of Internet Explorer & check if the problem persists.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is anyone having problems with FF v29 where the bookmarks bar is empty?

  In the new version 29, after opening FF, close it, and then re-opening, most of the time, the bookmarks toolbar is empty, even if the option to show it is checked. By turning on the menu it brings back or unchecking it and controlled again he brings. In addition, when this happens, icon menu on the far right will display all the options. What happens to me on the Mavericks of OSX, Windows 7 and Windows 8.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).

  (If you are using an additional theme, place you in default theme.)

  If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:

  

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you.

• Anyone having problems with crashes after setting the units (lb/po2) on an indicator on the dipstick?

  I use an indicator of money gauge to show pressure. With no set of units, everything seems to work properly. When I set units 'psi' and immediately try to save LabView hangs and crashes immediately after each next attempt to open the file project or VI. I'm using LabView 2012 (12.0f3) 64-bit on Windows 8. It is the first crash, I had. Unfortunately, it seems that the file is corrupted and I lost a few hours of work. Now I'm afraid to continue using this VI of fear he crash of something else and corrupt the file and I'll lose my progress. Any help would be greatly appreciated. I presented the crash to the settlement report, but who knows how long it takes to move to study the problem.

  Hi Arcus,

  If you search the forum you will find a large number of "moaning" on the buggy and incomplete unit support in LabVIEW. My favorite is the square function (available from LV2009?) which will follow "4 m" when you want as the square of "2 m". Of course: meter ^ 2 is always meter. And we're just talking a very basic unit...

  

  You will also find on the controls of the money bug reports.

  Combine all these threads in your own conclusions!

  I don't use controls of the money, and usually I stay away by using units of our days...

  BTW: I would also stay away from units such as "psi". Just my continental Europe perspective

  (Once I got to work with a machine (treatment of semiconductors) produced in the United States. She had 4 gauges next to each other using 3 different units: lb/po2, inHg, Torr. There must be a reason to do it, but have you ever needed to compare these pressures? Easy to remember these conversions...)

• Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Hi Chaz,

  I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.

  Please answer these questions to get a better understanding of the issue.
  1 have changes made to your computer before this problem?
  2 shut down other applications while they are in use?
  3. do you get an error code?

  You can try these methods to check whether the problem is resolved.

  Method 1: Run the troubleshooter of app.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Open this link to launch the troubleshooter.

  Method 2: Update the application.

  Method 3: Reinstall the application.

  This link has the steps that you can follow to update and reinstall the application.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Feel free to use the forum for any other issue of Windows, you may have.

• anyone having problems with the junk e-mail filter in hotmail or msn Explorer

  anyone having problems with the junk e-mail filter in hotmail or msn Explorer

  Hello

  1. The issue is only with MSN mail?
  2. Have you tried using another web browser and check if you are faced with a similar question?

  Given that the problem is related to MSN I suggest you to contact MSN support for assistance.

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  Check also:

  https://support.MSN.com/default.aspx?&St=1&wfxredirect=1

  http://windowslivehelp.com/product.aspx?ProductID=1

   

  Hope this information is useful.

• Is anyone having problems with the last lR? I can't do to apply effects to develop at all. I have to force to leave whenever I try to use it.

  Is anyone having problems with the last LR?

  I can't do the effects to apply to develop and I have to force to leave whenever I try to use it.

  I have absolutely nothing accomplished recently - it has worked so well.

  I created enough space on my hard drive thinking that this might be a cause of slow operation but he has not made the difference...

  Hi GKVsiuals,

  suggest make you in Lightroom preferences > performance > uncheck 'use graphics processor' and restart Lightroom to check again.

• Anyone having problems with guides since the update?

  Anyone having problems with guides since the update?

  My guides are everywhere, since I updated my Illustrator last week. The guides are solid lines while they should be dotted (as defined in my preferences) when I'm zoomed out... and then disappear or become dotted but moved when I Zoom.

  It's so frustrating! I can't work like this!

  All the solutions out there?

  Thank you

  lyncylox,

  You can try to disable the GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU; You may also uncheck performance GPU in your preferences.

  I think that the issue should be fixed with the 19.0.1 patch.

  Link to 19.0.1 release notes: https://helpx.adobe.com/illustrator/kb/illustrator-cc-2015-crash-bug-fixes-19-0-1.html

• Is anyone having problems with their Apple Watch since the iOS 10 came to life?

  Is anyone having problems with their Apple Watch since the iOS 10 came to life?

  Hello

  If you have not already done so, it can also help update your Apple Watch to the latest version of the software:

  Update the software on your Apple Watch - Apple Support

• Anyone having problems with iOS 9.2.1? Storage problems, apps not working?

  Anyone having problems with iOS 9.2.1? Storage problems, apps not working?

  No, not at all. Maybe if your were to describe the issues a little more in detail, someone might be able to help.

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• Problem with windows update and Service pack 1 for Vista 32 bit.

  A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

  ------------------------------------------------------------------------------------
   
  A problem with Windows Vista
  Windows Vista has stopped working properly.

  This problem has been corrected in Windows Vista Service Pack 1 (SP1).

  What is a service pack?

  An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

  To resolve this issue, follow these steps:
  Determine if your type of operating system 32-bit or 64-bit.

  How will I know if my system type is 32-bit or 64-bit?

  Click the Start button, right-click computer, and then click Properties.

  Under system, you can view the system type.

  The average of 32-bit and 64-bit?

  Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

  For more information, go online and read this article for Windows Vista online help:

  32-bit and 64-bit Windows: frequently asked questions

  Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

  Windows Vista Service Pack 1 for 32-bit systems
  Windows Vista Service Pack 1 for 64-bit systems
   
  -------------------------------------------------------------------------------

  In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

  In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

  Ralleny,
  Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Windows Update and load XP SP3

  I had a problem with my system and had to replace my HARD drive and reload XP and all my applications and data.  Now, I installed SP2 and try to install SP3. Windows Update does not work (get the 080244019 error code x) and when I try to install the SP3 files from the Microsoft site, it'll run about halfway through and then stop and hang, displaying the message "Finish Installation" with bar at halfway of the progression.  I tried the MSRT and FixIt nothing helps.  I checked services.msc to see all the required services are enabled or started.  I read that some malware will be stop some services without notice.

  After a few attempts to load the file SP3 failed, check Add/Remove programs in Control Panel Windows XP Service Pack lists 3 but no file size or to update the date information as with other programs.  My browser is IE8 and I was doing some Hot fix for Windows XP downloads, this adventure started about 3 weeks ago, but no other automatic update downloads.  I use the following McAfee provided by my ISP for protection AV and firewall with regular full scans.  Scan today revealed there is apparently a single trojan file that cannot be deleted, but there were no further details.  My system is also fully functional; I seem to get the updates for McAfee and other applications OK but not SP3.  I received or otherwise installed following updates or Hot Fix for XP downloads in the past 3 weeks:

  KB954550-v5

  KB932823-v3

  KB915800 v4

  KB884020

  KB926239

  KB2618444 (Windows IE8 security update)

  I found an answer on another forum on editing the registry for the "/ Edit EDWARD CSDVersion value ' but have not yet tried waiting for any response to this request.  I'd like some useful suggestions.  Thank you and happy new year!

  Thanks for the quick response.  I did some checking on my system, I have XP Home Edition ships with the system bought in July 2007.  Add/Remove Programs shows that the aborted install XP SP3 and IE8 installation; I tried to load the SP2 file but it doesn't show here as an addition, so it may have been part of the original XP CD and I just crush.  Even for IE7 so I am not able to drop back to all recommend you.  I will try your solution later today and post my results. I saved SP2, SP3 and IE8 in my office and a flash player to reload later according to your instructions.  Stay tuned.

  It would be unusual for a CD of Windows XP (official) to have integrated Internet Explorer 7.

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Problem with Windows Fax and Scan.

  I have a Canon MG5420 and Win7 64-bit.  All of a sudden, the Office does not see the scanner.  The print function continues to operate correctly.  Problem occurs regardless of USB or WiFi connection.  The only change in my system is a migration towards Office365.  Other than that, no change. I tried all the basics: refreshed drivers, uninstalled the printer and re-installed.  Any thoughts on what could be the cause?  I get the message error is "No. scanners were detected.  The utility Scan Canon IJ can see the scanner, but I prefer to use the Windows fax and scan.  Any ideas?

  Unfortunately his is possible because there are different drivers and stacks of driver for the printer and the component the same multifunction device installed on the client computer scanner. In a case when the right printer driver is installed and available from the scanner driver may be missing or may be incompatible with Windows Fax and Scan requires the parser must be WIA 2.0 compatible, a TWAIN compatible scanner only for example will not work with this app).