Anyone know what the error windows\system32\urgRLfgh.dll? Or where to go to get a fix?

Similar Questions

• Anyone know what the error code 43 while he was trying to install DC Pro?

  Anyone know what the error code 43 while he was trying to install DC Pro?

  You download Acrobat app from the direct link or download manager?

  For example:

  Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  If possible after the screenshot of error.

• Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  Printing of the .pdf of the 2013 project file will stop when the name of the file must be written. Project 2013 crashes. Anyone know what the problem is between 2013 project and Adobe Acrobat 9?

  The family of products Acrobat 9.x passed in mid-2013 "end of Support".
  Using Acrobat 9 of MS Project via PDFMaker stops with Office 2007.
  To 2013 Office support, you must use Acrobat XI (11.0.1) or newer.

  A good reference:
  https://helpx.Adobe.com/Acrobat/KB/compatible-Web-browsers-PDFMaker-applications.html

  Acrobat Pro and Standard DC are what are currently available for purchase.

  Be well...

• application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  Hi everyone, my fathers laptop crashed yesterday and since then he was able to start and the following message appears

  application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  something appears then it restarts. I did some occasional checking of this problem, as believe that he may be able to replace the file with its installation in recovery mode disc, although neither nor I did before can someone provide some support on what to do, ideally if we can get into windows and get the docs off the laptop computer he is happy the new facility because I think that it maybe Basic virus/malware issue.

  Thank you for your time and help in advance

  If the c:\windows\system32\odbcint.dll file is missing, you see a message like this:

  User Interface failure
  The logon User Interface DLL msgina.dll failed to load.
  Contact your system administrator to replace the DLL or restore the original DLL.

  There is a button to click to restart, which when clicked, takes a while to reboot the system.

  If the c:\windows\system32\odbcint.dll file is corrupted, you will see a message like this:

  Winlogon.exe - bad Image
  The application or DLL C:\WINDOWS\system32\odbcint.dll is not a valid Windows image.  Please check this against your installation diskette.

  By clicking OK twice, you will see the message above about the failure of User Interface.

  There will be events in the case where the viewing Application log that look like this:

  Event type: error
  Event source: ODBC
  Event category: no
  Event ID: 0
  Description:
  Cannot find the description for event ID (0) in Source (ODBC). The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: unable to load the resource DLL odbcint.dll.

  You should figure out what happened to get into this situation and respond to the following questions, then decide which is the best plan:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system worked well until: _.

  Did the problem to the top after show installed new software and if so, what software?

  You have recently installed any type of remote control software?

  Now to fix it depends on how you are fixed to the boot media, since you'll have to start on something.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, start in Recovery Console XP using your genuine XP bootable installation CD or if you have a genuine XP bootable installation CD, you can make one (no XP media required).  If you don't know what type of bootable media, you, do a CD of bootable XP Recovery Console and do not forget.

  If Yes, you want and are not in possession of a genuine XP bootable installation CD or a CD from Recovery Console XP bootable, the instructions to create a bootable XP Recovery CD of Console can / will be provided before any questioning begins.

  You can replace the missing file or suspect the XP Recovery Console by entering the following command:

  Copy c:\windows\system32\dllcache\odbcint.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  If you get some type of a file not found message, the file is easily replaced using other methods.

  Remove the CD and type "exit" at the Recovery Console prompt to restart the system.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• What does C:\Windows\System32\BFE32.dll mean?

  What does C:\Windows\System32\BFE32.dll mean? I get this message everytime Iask my laptop at all do. It seems harmless enough as once I approved it everything works normally. That's all just annoying. Also, is it possible to return to a restore system to one other specific time point as the previous three days IE a month ago? Thank you.

  Hello

  If you Google "BFE32.dll", it comes as malware (a fake security program)

  Error messages that can be used:

  • "A required DLL, bfe32.dll is not found."
  • "This application has failed to start because bfe32.dll was not found."
  • "Cannot find bfe32.dll".
  • "The file bfe32.dll is missing."
  • "Cannot start Microsoft Windows. A required component is missing: bfe32.dll. »

  Download, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  System Restore problem:

  Malware will interfere with the restoration of the system.

  After you have analyzed your system, try again SR.

  See in this connection in the second image under choose a Restore Point is a box to search for points of restoration more than 5 days.

  http://bertk.MVPs.org/html/restoresysv.html

  Either the old restore points have already been created, or they do not exist.

  And system restore deletes older restore points as the most recent are created.

  See you soon.

• Error SP3 cannot be updated to SP3. The c:\windows\system32\comctl.dll file is open or in use by another application

  I am running windows xp sp2, and my system no longer recognizes my cd/dvd ROM. I tried using microsoft 'Fix It', but it says I need to run service pack 3. During the download of update I get error SP3, the file c:\windows\system32\comctl.dll is open or in use by another application. All the closed only apps.are execution update for sp3.   The cd/dvd ROM error says file in the registry is missing or corrupted. I'm stuck. Anyone know what I can do?
  Thanks, Rokcney

  Hi Rokcney,
   
  Follow the steps listed in the section "Let me fix it myself" in the following article to resolve the problem:
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Since my last windows update, whenever I open firefox, I get an error message saying BAD IMAGE on the C:\windows\system32\WRusr.dll file. Can you help me?

  The message I get is:

  "C:\WINDOWS\SYSTEM32\WRusr.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your administrator or the provider of support software. »

  I can't open Mozilla firefox more. I tried reinstalling 3 times already.

  I have reintalled webroot and everything seems fine now.

• Does anyone know what means error-250043 TClk?

  I need help finding this error code.  I don't know what the problem with this VI.  It was very good of work last night and now I get this unknown error.  Any suggestions?

  A little more info: this forum works on a system RT PXI with 2 of the PXI - 5412 AWG and a PXI - 6541 HSDIO.

  I just reinstalled several driver packages. Seems to work now.  Thanks for your help!

• Does anyone know if the 10 Windows will be more like 7 8.1?

  Does anyone know if the windows 10 will be nearest 7 than 8.1? I hate 8.1!

  Windows 10 is basically the same as 8.1 of Windows, but with a few small changes:

  1. The start menu should not be full screen size (you can choose the size)
  2. The 'active modernity apps "not touch need to be full screen size (you can choose the size)
  3. Other small changes like Cortana research, a new browser and reorganized Control Panel (settings).

  Everything else is basically identical to Windows

• : Error \Windows\system32\wow64cpu.dll

  When I try to open ANYTHING on my laptop running vista, I get this message

  C:\Windows\system32\wow64cpu.dll is not designed to run on windows or it contains an error try install the program by using the original installation media or contact your system administrator or the provider of software for support.

  OK if I try to reinstall anything that happens that I can't open a .exe file. So, when I try to fix it, I am unable to

  Help, please!

  Hi makeupjunkie,.

  Thanks for the reply to answers.microsoft.com

  Windows Live Media have of these four DLLs associated with them;

  C:\Windows\System32\ntdll.dll
  C:\Windows\System32\wow64.dll
  C:\Windows\System32\wow64win.dll
  C:\Windows\System32\wow64cpu.dll

  Manually register the dependent .dll files of this error and see if that fixes the problem.

  To do this, click on the ORB start / to the command line search / right-click on the command prompt in the programs list / select RUN as ADMINISTRATOR / in the command line type

  Regsvr32 /s ntdll.dll and hit enter / hit and regsvr32 /s wow64.dll then enter. / then hit and regsvr32 /s wow64win.dll seized. / then hit and regsvr32 /s wow64cpu.dll seized.

  Try to open your programs again.

  If this does not work, try the command SFC/scannow from the ORB/start / enter the line of research type SFC/scannow.

  Let us know if there are mistakes that he can't solve.  If it fixes any errors trying to reopen the program.

  In addition, you can get in safemode?  Restart the computer and press F8 as it boots up.  Select safe mode with network.  When you are on a Windows screen, try to open programs.

  Please keep us informed on this issue.

  Thank you

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error Windows\system32\authui.dll = locked in a reboot loop

  Two weeks ago, I installed Windows 7 on the blank hard drive to my newer computer. Initially, I could get it started off, but every day since then, I met a variety of errors, some start requiring repair and others, implying that my anti-virus [AVG 9] program was at fault. I was also unable to get my Dell 940 printer to work.

  Yesterday, I uninstalled the AVG program and installed Norton 2010 program. Later, I tried to uninstall and reinstall the printer driver, but the driver would not download from Microsoft.

  After the closure of the system to the normally last night, I tried to start again this morning. Once again, I have had to run through the "Startup Repair" program that has me 073b947e1 to 0 X 80000010 was in could not be read and then closed.

  Restarts, I opted to run the diagnosis of memory who told me that a hardware problem had been detected, indicating that "the volume of the system on the disk was corrupt.

  On reboot again, I had to again run through "Startup Repair". This time I was told that there was 'bad' and that I should try to reinstall the software of Windows 7. When I tried to do so, however, I got the error message following, which is what appears when I restart the computer.

  "C:\Windows\system32\authui.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider. »

  I get this error message if I try to go into safe mode or even a C prompt.

  I'm not all that knowledgeable with the workings or programming, so I'm stuck.

  Hi j. Marchesani,.

  ·         Windows 7 installation succeeded on the computer?
  ·         What is a custom installation or upgrade installation that you perform on the computer?

  This error message can occur if the equipment does not meet the requirements for Windows 7.

  I suggest that you run chkdsk in Windows Recovery Environment [RE] that could help solve the problem.

  You can access Windows RE using the Windows 7 installation disc or a previously created system repair disc.

  To use this method, you need to restart (boot) your computer using the disk.

  Insert the disc.
  Restart your computer using the power button on the computer.
  If you are prompted, press any key to start Windows from the installation disc.
  If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  Choose your language settings, and then click Next.
  If you are using the Windows installation disc, click on repair your computer.
  Select the Windows installation you want to repair, and then click Next.
  In the System Recovery Options menu, click command prompt to open it.
  8. in the command prompt window, type the following command and press enter Chkdsk /F /R

  9. press y when you are prompted to check the drive the next time the system restarts.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts. Now run the disk check in command prompt, follow the steps below:

  See link: What are the system recovery options in Windows 7?: http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  During the installation of any external device to the computer, you can check if the device is compatible with Windows 7 or not since the windows Compatibility Center 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error windows\system32\advpack.dll is not a valid image

  I try to install Life Cam VX-5000. I get an error image DXSETup.exe - bad... It is said THAT DLL C:\WINDOWS\system32\advpack.dll is not a valid windows image. Please check against your installation diskette. I'm not a programmer or anything, just an ordinary girl looking for help. Can someone walk me through what to do to solve this problem in simple terms? Thank you!

  System Machanic 6 has detected that a file Advpack.dll was spyware on his deep optimization of Start Up procedure. However, Windows replaced after its deletion and I ran SM6 Pro again. This time he ignored the file.

  CONCLUSION: There are maybe a program that replaces the Advpack.dll real with a fake spyware Trojan. Perhaps in one of the free SP2 packs on the internet or another program. Here again, it may be a fault with Spyware detectors.

  As long as the file is replaced by Windows automatically, so there is no real problem, and we can thank God for the major spyware removal programs.

• OS does not start and screen with the error (root) system32\hal.dll windows is damaged or missing black

  I was trying to stop some HP programs to start when I start my desktop computer. I did the following: start > run > msconfig.  Click on startup and unchecked HP four applications. Restarted my desktop computer and immediately had a black screen with the following message:

  The window could not start because the following file is missing or damaged:

  system32\hal.dll

  Please reinstall a copy of the above file

  I can't do anything in Safe Mode or one of the other options. Cannot re - install Windows XP Home Edition because Windows or Internet Explorer 8 will not run. Only the black screen and the message mentioned above.

  I use a desktop Dell Dimension 8400 computer.

  [1] Just finished everything on your step 10. I went with the Microsoft Security Essentials.

  [2] I still need to download site driver Dell trying to correct this "floppy seek failure pilot 1,2 and 3 not found: ATX, SATA 1, 2 and 3' problem"

  [3] I just got e-mail from Microscoft response that the thread that I created has been deleted, so I answer to you of a past replica.

  Wanted [4] Thank you for your time and patience to help me. Is there something else to do for me, you can recommend?

  A1. Wise move IMHO. The computer seems "snappier" now?

  A2. I can't imagine that another owner of a Dimension 8400 (or 4800?) has not encountered this problem before. Discover (i.e., search) the Dell office equipment forum: http://en.community.dell.com/support-forums/desktop/f/3514.aspx. If necessary, start your own new thread (registration required).

  A3. If you start another thread on the computer, I have posted a reply to this & you asked to publish a follow-up replies to your original thread. [?]

  A4. Welcome & thank you for your comments.

  In fact, there is something else you may need to do: it turns out that KB2607712 is replaced by the KB2616676 in Vista & Win7; Windows XP needs to have both installed [despite the mention you referred in your post on September 14, above] !!!

  => So if Update for Windows XP (KB2607712) is NOT listed in Add/Remove Programs, you will need to manually download/install a revised version [long story, involved - you don't want to know]:

  ~~~~~~~~~~~~~~~
  ACTIONS:

  1. open Internet Explorer to http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=27244 & click on the button CONTINUE.

  2. after VALIDATION, download the installer for KB2607712 & save it to your desktop - NOT run again!

  3. close all open applications (that is, anything with an icon on the taskbar).

  4. double-click on the file that you saved in #2 above to install the update. Follow all the instructions (reboot required).

  5. check that the Update for Windows XP (KB2607712) is now listed in Add/Remove programs.

  ===============

  PS: If you have NO Office or Silverlight or any installed Windows Live Essentials application, I can tell you how to start your Windows XP computer & full load more quickly.

• I have Vista running on my PC - in the last 3 weeks, I encountered this error: Windows\System32\napinsp.dll is not designed to run on windows...

  This error occurs more than once and started several weeks ago.  I have not loaded any new program before that and tried several programs which are 'supposed to fix' dll errors (and does not).  I have re-set the computer to a date earlier when the error does not occur, and none of it worked.

  Hello

  To resolve this issue, try these methods.

  Method 1:
  We will first check if the same issue occurs in Mode safe or not. Configure the computer to boot, if the problem does not occur in Mode without failure.

  Step 1:

  To start the computer in Mode safe following the procedure described in the link.

  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:
  We will configure the computer to boot, if the issue occur not in Mode safe. And check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I would say allowing you to run the auditor of file system (CFS) analyze and check if it helps.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:
  If the problem persists, I suggest you analyze your computer by using the Microsoft Safety scanner to make sure that the computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• How can I get a copy of the file < windows > \system32\hal.dll.

  How can I get a copy of the file \system32\hal.dll.   ?

  There are 7 possibilities for the hal.dll file and the installation of XP takes the right one to match your hardware during the installation of XP.

  That's why replace a bit difficult because you need to know which of the 7 on the XP installation CD you need.  You can guess and try things and you might get lucky, or you can try them all.  That would take some time and probably be frustrating and you would need a CD bootable XP installation genuine to start the trials and errors.

  Replace the hal.dll file becomes even more difficult, because most of the people do not have a genuine XP bootable installation CD, even if they wanted to replace the hal.dll file.  If you really want just a copy, you can understand that one you need or just copy the one you already have.

  Unfortunately, the Microsoft Answers don't ask for enough information when a new question is asked to provide you with a good idea for your problem not specified.  For all that is your problem not specified, you will need to provide additional information.

  If you see the message that your hal.dll file is missing or damaged, the chances are that the file is not really missing or damaged... Windows XP just can not find the file.

  Fix hal.dll "missing or corrupted" message is usually not too demanding and has nothing to do with the replacement of the file.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?