Anyone who has a problem with the system crashes when importing using the new interface to import

Similar Questions

• Anyone who has a problem with net.exe?

  Windows 7 Ultimate x 64 with all patches

  Open a command window and tried to run net.exe:
  C:\>NET
  This version of C:\Windows\system32\net.exe is not compatible with the version o
  f Windows that you use. Check your computer's system information to see information indicating if
  r you need a x 86 (32 bit) or x 64 (64-bit) version of the program, then told the
  CT the software publisher.

  Checked net.exe and found that it was not true.  Did a scan using Microsoft Security Essentials and it says that it ASNA 2 files and found no threat.

  The original net.exe was renamed appearently net1.exe.

  The owner of the file is trustedinstaller.  I can't move, rename or delete it even when running as administrator.  The system says that I need the permission of the Trusted Installer.

  Any idea of what could have caused this and how get rid of?

  Hello, saberman

  The fact that the Details tab of the property sheet for your net.exe is not filled with the correct information is undoubtedly a problem. This is why suggested Yann Support engineer runs the System File Checker ("SFC"), which is designed to find and replace corrupt or missing system files from backups in your store of components (windows side by side or WinSXS folder; note that the KB929833 article I just linked ("System File Checker") has yet to be re-written to reflect the fact that) Since the advent of Windows Resource Protection in Windows Vista is no longer a dllcache folder in System32 and file system backups are now located @ C:\Windows\winsxs\Backup).  Running SFC should have found the problem with net.exe & repaired, without needing to resort to a system restore, which can sometimes cause problems as indicated by the error message you posted, i.e. that net.exe "is invalid for your system.  I suggest to read the article from KB929333 on SFC and see if enforcement of that tool is not correct the problem. If not, a good starting point for troubleshooting to solve the problem is the sfcdetail.txt newspaper, which shows the results of each operation of checking files and each transaction attempted repair. instructions for how extract/transform/load this journal of his 'home' in the service area global log (log CBS.log) in a usable format appear under the heading "How to view the details of the System File Checker process" of KB929333, and the instructions on how to repair files that are not SFC are included in the article "How replace manually a file system damaged by a known file correct copy" section (the two sections are available by clicking on the circle '+' sign next to "for more information").  It is to note that it is not uncommon to have to run SFC repeatedly to deal with corruption - 3 times is the recommended minimum, and I personally saw him require more... the error dialog box that you see leads me to believe there is more harm than simply a lack of functionality net.exe and CFS can be just the thing to get things straightened.

  That said, it is also true that there is often more than one place that a protected system file is stored, other than the C:\Windows\winsxs\Backup on a Windows 7 computer. Typical areas of other instances of the net.exe include C:\Windows\winsxs\x86_microsoft-windows-net-command-line-tool_31bf3856ad364e35_6.1.7600.16385_none_5208a7a3d3caa54c records, while net1.exe can usually be discovered (on a 64 - bit with an AMD processor machine) and two C:\Windows\winsxs\x86_microsoft-windows-net1-command-line-tool_31bf3856ad364e35_6.1.7600.16385_none_86b24994b5e6bfbf at C:\Windows\winsxs\amd64_microsoft-windows-net1-command-line-tool_31bf3856ad364e35_6.1.7600.16385_none_e2d0e5186e4430f5 (note that the part "31bf3856ad364e35" of these folder names may vary). There may be other places in the store of components according to these things the way that system restore several times has been executed, whether an OEM computer (i.e., a pre-loaded with Windows by an Original Equipment Manufacturer) who has already found "Factory Spec", which updates Windows, service packs and other fixes/patches have been applied, and other factors.  The trick is to know what file is correct to use to replace a version corrupted in C:\Windows\System32 - which is not always easy to determine - and by "taking possession" file corrupted in question, so it may be deleted or replaced.

  The windows component store peut usually be used as the source of a file replacement for one that SFC cannot fix by using the information in C:\Windows\winsxs\Backup, but a user must make sure that they know what they are doing to avoid the disaster (this is why Microsoft has included the "automatic" option to perform a "repair installation" to correct the corruption of the system)- and if the user has access to another , work computer running the same version of Windows, or for the installation media (if no Service Pack or other update of the kernel has been applied), or "slipstream" self-created media (if Windows 7 Service Pack 1 has been applied) designed specifically for the operating system in use, extraction verified copies of the record of those required are usually an "easier" approach  Detailed instructions on the use of all these forms of installation with SFC media are in the Wiki author try * 3of 6 December 2013 post to the thread of community "System File Checker and access files blocked, while detailed instructions on how to create a"slipstreamed"media are in his post from August 25, 2012 to pg 3 of the thread"guide to recovery of Windows 7 Home Premium account user word of. past lost, unable to connect, connection problem"(it is also useful to have a look at this whole thread, which has very useful information about different Windows 7 recovery options, and that includes links to downloadable PDFs (portable document files) on each of the options many.).  BTW, these pdf files is hosted on the cloud OneDrive service, which is where we usually place downloaded files (for example the zipped copy of your corrupt net.exe file you mention) and make them accessible to third parties. to learn more on how to do that I recommend community animator Gerry C J Cornellexcellent tutorial 'Forums Community Microsoft"on its site Computer Tips of Gerry .

  As you noted, net.exe (and net1.exe - which, as I have, reminder has been around in all NTFS OS since @ least NT4.0 however hardly documented; official documentation only I ever)

  seen mention that this is the Windows Embedded article Utility Net.exe : thus, as well as many others

  protected system files) is 'held', in terms of security of the file/folder permissions, by service "Trusted Installer".  The implementation of the Protection of resources of Windows, Vista, limit property of this service-protected system files in large part to protect themselves against malicious or accidental deletions.  However, a user with administrative privileges ('high') can always take ownership over any file and then manipulate it at will.  TechNet Library 'ownership of a file or a folder' article provides advice on how to do it, but without expertise in the creation of a file batch, macro, visual basic program, Power Shell command or similar to handle this action based on a large scale, the procedure described is essentially limited to a one-at-a-time approach.  In my opinion, a better technique is to add the ability to take ownership of a file or folder from the context menu (right click "") of the operating system. many people have found the information and automated "registry hacks" in the Seven Forums tutorial "Windows 7: take ownership shortcut" very useful in this regard.  Even with this capability, users can occasionally run through a file that stubbornly refuses to behave even when the property has been reassigned to the said user. in this case, the stand-alone freeware program ("Portable Executable", requiring no installation runs) UnLocker can be valuable.

  I'm hopeful that SFC be enough to take care of this problem for you, but if not, I would also consider

  check the integrity of the hard disk / partition with Check Disk.  If none of these solves the problem, a repair installation may be in order.  Useful information on this procedure can be found in article KB2255099, "How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2" and the tutorial of the Forum seven "How to do a repair of trouble Windows 7 installation.  Good luck!

• Anyone who has experienced problems with HOL-PRT-1308 - Dell EqualLogic - manage and protect vSphere

  I tried this laboratory several times but it is always empty, there is no VMs on it while in the statement, it is said that there is a center of data, host and VMs already created. Whenever I go it is always not created data center. Also in the statement, it asks you to click Home and I guess to see an icon with the name "Dell Virtual Storage Manager" I don't have that one as well. The laboratory all function with this icon and if you don't have it you can't not do laboratory. I tried to average different places different network just prove who has nothing to do with my network firewall or GPO, not this speed because nor does the House or work. Any help if someone had the same problem.

  Hello

  I apologize for the difficulties you experience in this laboratory. You are right that this behavior would not be bound to your location network, GPO, or latency because it is all contained in the lab environment.

  I connected to the laboratory, launched the web client and logged on as CORP\Administrator. You connect by checking the "Use Windows session authentication" box on the login screen, or you manually type the credentials?

  

  The manual says to use the box, that's how I connected. You want to make sure it says "[email protected]" in the upper right, once you have connected. Once connected, when I click on the home button, I see the following with the Dell Virtual Storage Managerscreen. It seems that you do not see this icon.

  

  Similarly, I don't see a crowded inventory:

  

  It is possible that you had a bad lab deployment, but if you have seen this behavior several times, this probably isn't the problem. If you can try to use the checkbox to connect and possibly further clarification, I can try to troubleshoot further.

  -Doug

• Who has a problem with the keyboard on the Satellite A205-S5000?

  My keyboard sometimes, when I'm writing but at some point don t want to write and after some time writing again.
  Help with this Holster

  Perhaps the HARD drive is busy with various operations as a background scan or something similar? In such a situation, it can happen that the symbols on the screen appears slower and offset of the activity.

  Is a busy HARD disk when this happens?

• Anyone who has other trouble with redcross haqve anti-virus software?

  original title: redcross anti virus

  Anyone who has other trouble with redcross haqve anti-virus software?

  Hello

  Red Cross Antivirus is a fake antivirus, a scam to force you to pay for it while he has no advantage at all.

  Red Cross Antivirus remove (uninstall Guide)<-- read="" this="">
  http://www.bleepingcomputer.com/virus-removal/remove-red-cross-antivirus

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!

• The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are security protected.

  Access to the BT hotspots.

  The place most frequent that I need to connect to a BT hotspot has a problem with the nearest hotspot. Although many sites come they are protected from security and only the nearest BT hotspot is displayed. There are many others, but they are invisible. I think that there is a software that allows you to see several hot spots the. BT are unable to give me the details.

  This is probably a function of the driver for your wireless card.  I would check with the manufacturer of the computer or adapter.

  Good luck.

• Dependency problem with the new Blackberry Plugin for Eclipse

  I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

  But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

  I tried to have the application project to import the project two library, but nothing alx files has changed.

  In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

  Can you give me an indication of what goes wrong?

  The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

• z index / layer of problems with the new YouTube widget!

  Hello!

  I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

  You can check my web project (and look at the code) here: http://www.firstlight.at

  Any help is greatly appreciated!

  I managed to solve the problem, and I believe this to certainly be a bug in Muse...

  In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

  Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

  Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

  Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

  After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

  I hope that it will be useful to someone!

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Everyone has a problem with the Windows Explorer permanently closing?

  * Original title: Windows Explorer

  Everyone knows about a problem with the Windows Explorer (not Internet Explorer) without interruption closing? It is not fair on 1 computer, I have 2 desktops and 2 laptops, and it does on 4 of them. They are all running Windows 7, (1 to the publishing house, 1A Ultimate and 2 Professional).  I can right click on something, even on the desktop, and most of the time, I get a message that Windows Explorer has stopped and the ability to close or wait for it to respond. I have normally not 30 minutes or more to wait so that he could respond and if I close it, then it does nothing. I've done all updates are recommended for all my computers, I did the defragmentation, disk check, etc and it still continues. I need help, please. I am so sick and tired of what I am about to go to a Mac and I don't like Mac computers, but said there is much less of a problem.

  You have loaded all 3rd party "Add-ons" in common to all PC? For example (this is an old post Vista but gives the general idea) - http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/windows-explorer-crashes-on-right-click/719385e6-fff5-498d-807c-103bf0344f44?page=1&tm=1423414000974 and see Ramesh respond.

  If not, is there clues in the log of events (errors) in common on all computers where the crash?

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory

• Problem with the new import Presets

  Someone forgot that the import presets also recorded different destination folders for each preset.   Now I can't change the import preset, but it only seems to affect who develop preset is selected.  Does anyone know what they were thinking?

  Thanks for the update.

  The problem with the destination folder, not updated as saved in the preset import has been reproduced on our end and it will be saved so that it can be taken care of.

  And "eject after importation" has been voluntarily removed. There is no more in Lightroom CC2015.2/6.2

• Problem with the new Notes, do not sync with many testimonies

  I have several iCloud for work and my only personal accounts, since I just have an iPhone, I tried to synchronize all the accounts and their use on the same device.

  I found the following, maybe apple wants to examine, or re-thinking that he...

  HomeMac has my iCloud account staff, main on my iPhone, so the arrival of new tickets I've updated as suggested for the new features, everything went well.

  On my work, that I have a main and other iCloud for test account and so my main account on the desktop, it is not the main on the iPhone, is a secondary antibody and since last September did not want to synchronize the Notes, I couldn't find a reason to today where do more test with multiple accounts. Checking search for differences between accounts on Mac, configuration of web and iPhone iCloud Finally I saw the difference. Main account have the new interface of Notes on the iPhone, iCloud and Mac. Secondary accounts has old interface Notes on Mac / iCloud and iPhone, but always properly synchronized, so that on caos is just my main office account, which has "partially upgraded', when used a desktop Mac, it works under the new Notes interface, iCloud way suite, but at the time I check on a device where is a secondary antibody account he stopped to show me the new data upgrades or data, because it can not "mix" information, is as main account on iPhone has new tickets upgraded, but secondary accounts can not, do not know why, but I guess that has to do with the same question, you can only access info Pages, Numbers and Keynote, on a device, to your iCloud account main If you have a second account, there is no way you can access your information from these applications on the same iPhone / iPad.

  I was happy when Apple decided to make a second account iCloud on our devices and applications (Mail, Notes, calendar, Contacts, etc.) could manage the data separately, which has been a success, al at least for me, but now when Apps allow you to do more, when you try to make / get most of your devices, even once, we face limits that other applications has resolved as Instagram or Twitter where you can switch between the accounts and continue to use the App with a full capacity.

  For me, it is not 'normal' that if I updated a secondary account of new Notes and the iPhone can handle for the main account, this secondary account could not synchronize. I am committed to update on Mac to take advantage of the new features, but if yes, then what is supposed to do with my Notes on the secondary account if they no longer work...

  Please if anyone has an opinion on what might help solve, I will appreciate it.

  Thank you

  To understand, you must also understand how the notes are used to synchronize. Each IMAP account (emails mostly) have an underlying protocol used to perform the synchronization of notes. Icloud account is IMAP, Google is also (or they both have most of the components of the IMAP, but it is more complex then just). Sync IMAP notes would never let features advanced to be synchronized, so had to go with different type of synchronization of server Apple to improve the 'notes' (details - below) but that the clocks single server an account - main. For all those who have upgraded cannot go back and use the IMAP protocol. Therefore, when you add a few accounts to iphone only primary account has one capacity improved and other accounts synchronize using old IMAP.

  The specifications are in this article from apple.

  Before you upgrade your notes - Apple Support

  Upgrading of your notes with iOS 9 and OS X El Capitan - Apple Support

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.