Anyone who uses the MusexPress Pages for CMS?

Similar Questions

• Anyone who uses the VMWare adapter? Do you have suggestions for a connection problem?

  I have a connection to a vCenter who works for years. (touch wood).  I am trying to add an another vCenter to tide.  I use the exact same username and password, but I get an error on the valid username and password.

  I tried on 3 different environments of tide.  I can connect to the application of vSphere with the exact same username and password that I updated the current and he succeeds, but the tide connection still does not work.

  Any suggestions are welcome.

  Thank you!

  Michelle Morris

  I suspect that you are facing a known issue in VMware runtime configuration of the user.

  CSCuu49010 - user VMware 5.5 must be created as domain\username.

  Symptom:
  VMware connection is not getting up when the runtime user has domain association
  
  Conditions:
  1. Create RTU for VMware
  2. Specify  and 
  3. Enter the password for VMWare adapater
  4. Now, go ahead and create a new connection for VMware
  5. Connection will not be coming up
  6. Now, remove the domain from RTU and instead specify the username in  format
  7. Connection is now up and running
  
  Workaround:
  In the runtime user configuration associated with the VMware adapter, remove domain name from the Domain drop down and instead specify username in  format.

  You use the areas in your user Runtime used for the new vCenter connection? If so try to remove the domain name from the drop down field and instead specify the user name in format.

• Anyone who uses the XcodeLegacy script?

  Anyone using this script XcodeLegacy to compile projects from older versions of Xcode?

  Devernay/xcodelegacy · GitHub

  I am trying to compile the plugins of sample of Illustrator CS6 SDK with Xcode 5.1.1 with an end 2012 running Yosemite 10.10.3 iMac and have run into a wall because Carbon.h is no longer present. I installed the script XcodeLegacy in Xcode 4 a couple of years ago to recompile a plugin CS3 with very slight modifications, and it failed miserably, so not hesitate to try again if there is a simpler solution.

  Anyone care to share your thoughts on this? Thanks in advance...

  Rick

  Change the path of the header

  Add "${SDKROOT}" for the beginning of "/ Developer/header/FlatCarbon.

  It should look like at ${SDKROOT} / developer/Headers/FlatCarbon

• PANTONE + does not match the previous Pantone spot color chart. I have several customers who are using spot colors in logos etc and now these colors are a mess. Can I get and use the old color for Illustrator books?

  PANTONE + does not match the previous Pantone spot color chart. I have several customers who are using spot colors in logos etc and now these colors are a mess. Can I get and use the old color for Illustrator books?

  Well, the spot color has not changed, but the way they were simulated four-color changed, they now use color management to get to the nearest ink possible task.

  Here is some info:

  https://helpx.Adobe.com/Illustrator/KB/PANTONE-plus.html

• Is it possible to disable the "edit layout" link on the Details page for the record

  Is it possible to disable the "edit layout" link on the Details page for the record? Not home pages, I know there is a switch for that, but I thought that it was one for the detail pages?
  
  I want to disable what I don't want users who record their own layouts, they stick to the related sections defined in the default layout. The problem is that if they want to have access to some lists associated with when the opportunity is of a certain type, but NOT other types. If they saved the page layout (using the "Change layout" link) and change the record type, they will see the related provisions that were set to "Not available" in the default layout (IE step 4) for this 'type '.

  Robbo, for now it is not possible to disable the page layout to change the Registration Details page.

• My web app does not work with the new version of firefox 31. It uses the heatmap.js for leaflet.js plugin to generate the plan of the temperature.

  There is heatmap.js site: http://www.patrick-wied.at/static/heatmapjs/example-heatmap-leaflet.html
  There example of layer of flyer.
  I could see after upgrading firefox to version 31 temperature map in the browser for this example. But with a previous version of firefox I could see it.

  My web app users leaflet.js and heatmap.js plugin. It users the same code as on the example page.
  After update firefox version saying "your script take too long to run. Continue? "again and again and not contains a temperature card.

  I use the folder plugin - 0.7.2.js and heatmap - 1.0.js for brochure.

  Seems to work here.

  You can try the following steps in case of problems with web pages:

  You can reload webpages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How can I clear the browser history when you use the custom settings for history?

  When my history option is set to "Use the custom settings for history", the options page has no link to "clear recent history". There was formerly a menu option, but that seems to be gone now with Firefox 29. Is my only option to access the dialog box, clear the history all to change the historical option to history to remember and then change it back? Is there another way to access the option erase history all?

  I think you can get the menu bar by pressing the ALT key. If you want to return permanently, click View > toolbars and check menu bar.

• Firefox guard handed himself to "never remember history" even if I say "use the custom settings for history".

  Firefox seemed to work fine until yesterday. When I used Firefox yesterday, my home page was changed to Firefox start page and did not open my tabs from the day before. I went to settings and changed the homepage back to google.com and told to "use the custom settings for history". I closed Firefox and opened it again and my homepage was google.com, as I put it, but it was back to "never remember history". I tried several times, yesterday and today, but Firefox keeps affecting himself never "remember history".

  Choose the 'use the settings customized for history' parameter is not make changes to the parameters of the history and cookies.
  
  Firefox displays the "use the custom settings for history" as an indication that at least one story and cookie settings is not the default to make you aware that the changes have been made.
  
  If all the history settings are default, custom settings are hidden and see you "conservation rules: (never) don't forget history."

  Don't remember history"means that private browsing is active and"Always use private browsing mode"Gets a check mark.

  • https://support.Mozilla.com/kb/private+browsing

• my privacy setting is stuck on do not forget history, won't stay on using the custom settings for history, after I've selected and click ok

  When I go to tools, Options, privacy and "Use the custom settings for history" of the value and then click on OK it won't save. It remains on "Remember history", even if she never will save "remember history" as I tested it. It seems if be produced after these recent last Firefox update. Anyone know why I can not choose "Use the custom settings for history", as is the parameter I want to use?

  Why aren't satisfied with the history settings by default that you currently have?

  Any changes (for example, to disable the cookies third party or form not given memory or keep cookies until you close Firefox and make an exception for the cookies you want to keep) that you will cause "use... custom parameters. "to be selected if you really want to see.

• Anyone who passes BIOS suddenly changed for no reason at all?

  Anyone who passes BIOS suddenly changed for no reason at all? Not mine. I have a Toshiba laptop that is only a couple of months, and it suddenly would not accept my password BIOS or HARD drive more. I'm completely locked out of my own laptop! I don't see how it could have happened otherwise as a bug in the software or hardware of Tosh. Can someone help me? Your comments will be also welcome if you have encountered the same problem. You can answer here or you can also send me an e-mail to [email protected] information.

  Hello

  sounds may be stupid, but maybe you write the password in capital LETTERS and tiny not? I mean, just Don t password change on theirselves and sorry, but I have never heard of a notebook of toshiba to change the BIOS password or something similar. In this case, the human factor is sometimes the biggest problem. ;)

  Welcome and good weekend

• Is it possible to use the same password for two computers through quickbooks?

  We have two computers that are connected to each other through quickbooks and we must be able to get our e-mails from computers. Is this possible? We need to send invoices to the customers of a computer and the other is used for accounting and payroll.

  Original title: you can use the same password for two computers if they are already linked through quickbooks?

  Hi JayneB,

   

  (1) are you referring to the password of the user account?
  (2) who is the operating system installed on the computer?

   

  Method-

  I would like you to contact the Quickbooks support for assistance.

  Check out the link-

   

  QuickBooks support

   

  Hope this helps!

   

• I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

  Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

  Thank you

  Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

  If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

  I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

  Thank you much for the help...

  Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

  Thank you

  @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

• Win7 always tries to connect by using the default profile for the Native WIFI

  Win7 always tries to connect by using the default profile for the Native WIFI
  I defined a new WIFI profile for my home WIFI network. I use a USB of NETGEAR WNA1100 adapter. The profile is configured to connect automatically. I also moved over the default profile for the Native WIFI. Win7 always tries to connect to the default Native WIFI profile and not the profile that I created. Also, when I restart Win7, the default profile for the native WIFI moves to the top of the Profiles list. Also, when I try to change the default Native WIFI profile to use security WPA2 - PSK (AES) instead of WEP, it allows me to make changes, but he comes back to WEP after it treats changes and attempts to connect to the network. How can I fix so that Win7 will use my profile to connect to my home WIFI network and not the Native WIFI as the default profile. Win7 still connect using the default profile of NativeWIFI despite installing a different profile in Control Panel 'Wireless Networks '. I know that I can edit this profile by default, but anyone know how tell Win7 to use a different profile than the default? I tried to change the positions of the profile so that I want to use is facing up, but no, still uses the default. If I try to remove it, it comes back.
  After removing the two profiles and adding the profile for my home network, Win7 automatically added the default profile for the return NativeWIFI. My profile is configured to automatically connect to the network using WPA2 - PSK (AES) security and the default profile for the NativeWIFI (use WEP security) is the Win7 Setup to manually connect. Also, Win7 puts the default profile for the NativeWIFI above my profile. Also, when I delete the profile by default the NativeWIFI, Win7 it always puts back and he goes over my profile. This is starting to resemble the Win7 manage wireless mechanism for allowing users to add and prioritize the profiles of school boards does not work. Here's another thing that happens: when I try to change the security for the profile default of NativeWIFI to WPA2 - PSK (AES) of WEP, Win7 allows me to make changes, but it is up to the WEP after it processes the changes and tries to connect to the network. This seems too much for me, it's a problem with Win7. If I could do this job, so I need not to set up a second profile.
  The adapter I use a NETGEAR WNA1100 works correctly and I use it without any problem. I have is with Win7 and the interface to 'manage wireless networks '. It will not honor the fact that the WIFI profile that I created for my home network must be connected to automatically I installed. He always wants to connect to the default profile NativeWIFI even if I set up my home network profile to connect automatically. I can do a manual connection for my home network without problem. It seems to me that it is a question of Win7.
  Kind regards
  QRP

  Thank you very much - Netgear seems to have finally accepted as the default network!  If all goes well it will stay like this

  MAS

• By using the impl class for functions on a table

  I'm looking for a bit of advice on best practices.

  I have an app with 35 paintings.  I need to have a button "reset comes out" on each table.

  Each resetSort method should specify the table and the specific iterator.

  I tried to not having all the functions of 35 in the bean to support (1 for each table).

  Can I bind each table has associated feature class impl and each resetSort button call a method in this class?

  I use jdev 11.1.1.6.

  Any advice would be appreciated.

  Ray

  Then your real mission is to find the table for which the use wants to put sorting by pressing a button?

  This should be doable with the bean and a function that you bind to each of the reset buttons that you use for your tables.

  If your presentation is for the tables and the button to reset sorting, you can use an actionListener to the button. In the event of action, with the knowledge of the layout, it is easy to get to the table and once you have the table that you get the iterator from the table.

  Assuming that your tables are always surrounded by a panelCollection, who owns a toolbar now your reset button

  emptyText = "#{bindings." EmployeesView.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." EmployeesView.rangeSize}' rowBandingInterval = '0 '.

  selectedRowKeys = ' #{bindings. " EmployeesView.collectionModel.selectedRow}.

  selectionListener = "#{bindings." RowSelection EmployeesView.collectionModel.makeCurrent}"="single"id ="t1">

  You can use this code actionListener

  {} public void resetSort (ActionEvent actionEvent)

  get the link container

  BindingContainer links is BindingContext.getCurrent () .getCurrentBindingsEntry ();.

  DCBindingContainer dcBindings = (DCBindingContainer) links;

  UIComponent toolbar (UIComponent) = actionEvent.getSource ();

  Try to get the source of the event table

  assuming that the button is in a toolbar of a panelCollection we get using parent.parent.children

  List of children of = toolbar.getParent () .getParent () .getChildren ();

  Table richeTableau = null;

  for (UIComponent uic: children) {}

  If (uic instanceof richeTableau) {}

  table = uic (richeTableau);

  break;

  }

  }

  If (table! = null) {}

  the model in the Collection is the object that provides the

  structured data

  for the table to render

  CollectionModel tableModel = (CollectionModel) table.getValue ();

  the purpose of the ADF that implements the CollectionModel is

  JUCtrlHierBinding. It is surrounded by the CollectionModel API

  JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding) tableModel.getWrappedData ();

  Acess the ADF, which is used with iterator

  ADF table binding

  DCIteratorBinding iterBind = adfTableBinding.getDCIteratorBinding ();

  table.queueEvent (new SortEvent (table, new ArrayList()));

  CurrentRow key = null;

  Line = iterBind.getCurrentRow ();

  If (line! = null)

  currentRow = row.getKey ();

  SC SortCriteria [] = new SortCriteria [0];

  iterBind.applySortCriteria (sc); iterBind is that the table iterator use

  iterBind.executeQuery ();

  If (currentRow! = null)

  iterBind.setCurrentRowWithKey (currentRow.toStringFormat (true));

  }

  }

  This code looks for the table of the source of the action, which is the button in the toolbar, get the tabel. Once you have the table you get the iterator from the table and reset the sort. This works as long as we find the source of the action table. If you always use the same layout for tables (for example. panelCollection > table), which is a practice of good uix, you have need of a bean to reset all tables. Simply link the toolbar button actionListner to the listener in the bean.

  Timo

• I noticed that the logo of my company is no longer included in the download page (for example, for files sent to clients). The custom logo is still a feature of the subscription to Adobe send?

  I noticed that the logo of my company is no longer included in the download page (for example, for files sent to clients). The custom logo is still a feature of the subscription to Adobe send?

  Hi Val (and David),

  Yes, custom branding will be absolutely included in Adobe send; We know that this is an important feature for many customers and don't dream of it remove! We plan to add this feature later this summer. Until the option of customization is available in Adobe send, you can keep using SendNow to do all your mail files and use the logo/personalization feature here. We'll let you know when you can brand your matches send Adobe, and is then going to be sure to make the transition to the new service - but it is perfectly fine to stick to SendNow so far here.

  I hope that helps to clarify things! Let me know if you need more info from us on this front.

  Best,

  Rebecca