Anyway to interrupt a conversation iMessage and start a new conversation, with no history?

My sister and I, on the coast of the United States, facing each other, use iMessage.  My brother was in the hospital and it has updated me on his State.  He died yesterday.  I want to continue to use iMessage whenever I can, but I don't want to continue to see messages to him with details of his failing health.  Is it possible to access a new conversation with her, so I can't see the previous posts?  It's very painful.

Currently using the last update everything on the iPhone 6, 64gig.

Delete the conversation, and then start a new. The new conversation is started, none of the old iMessages will show.

If you're in the conversation in Messages, leave the conversation by pressing the blue "< Messages" at the top of the screen.

Press 'Edit' at the top left of the screen

Select the conversation (check the bubble on the left)

Press 'Delete' in the bottom right

You can also select individual messages to remove from an existing conversation by:

Tap/hold on the desired message

Select 'other '.

Check the individual messages you want to delete

Press the trash downstairs left

Press 'Delete Message'

You also have the option here of 'Delete All' at the top left of the screen

Tags: iPhone

Similar Questions

  • write 1 d digital table in a binary file and start a new line or insert a separator for each loop writing file

    Hello:

    I'm fighting with digital table of 1 d writeing in a binary file and start a new line or insert a separator for each loop writing file. So for each loop, it runs, LABVIEW code will collect a table 1 d with 253 pieces of a spectrometer. When I write these tables in the binay file and the following stack just after the previous table (I used MATLAB read binary file). However whenever if there is missing data point, the entire table is shifted. So I would save that table 1-d to N - D array and N is how many times the loop executes.

    I'm not very familiar with how write binary IO files works? Can anyone help figure this? I tried to use the file position, but this feature is only for writing string to Bodet. But I really want to write 1 d digital table in N - D array. How can I do that.

    Thanks in advance

    lawsberry_pi wrote:

    So, how can I not do the addition of a length at the beginning of each entry? Is it possible to do?

    On top of the binary file write is a Boolean entry called ' Prepend/chain on size table (T) '.  It is default to TRUE.  Set it to false.

    Also, be aware that Matlab like Little Endian in LabVIEW by default Big Endian.  If you probably set your "endianness" on writing binary file as well.

  • Then... Adobe doesn't have a pause for customers of the subscription option? Has anyone else had to pause/hold a subscription and they told you to cancel and start a new subscription when you want to return?

    Then... Adobe doesn't have a pause for customers of the subscription option? Has anyone else had to pause/hold a subscription and they told you to cancel and start a new subscription when you want to return?

    If you have a MONTHLY subscription, not an annual subscription with monthly payment, you can stop/start according to the needs

  • Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any w

    Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous

    Contacted Adobe Support and they recommended to configure the new Adobe ID?

  • I just remdered and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  "When I try to open this file and start a new project using tha the intro file, I get an error.

    I just made and recorded an intro I would like to use for all my projects, it is saved in a (* perl) file and is the only option to save in this format.  When I try to open this file and start a new project using tha the intro file, I get an error "the file is not a supported file or codex is not installed.  How can that be, I made the file using this program and he does'nt recognize files it creates?  Please advise... Thanks /.

    grethell

    What version of Premiere Elements you are using and on what computer operating system is running?

    You cannot import a project file (.prel) in another.

    For now, generalize choice

    a. export your Timeline (your intro) content to a file saved on the hard drive of the computer. And then import that

    file in new projects by using the new project add Media/files and folders. See publish + Share/computer/and the other

    choices here to generate this file intro for later use in other projects.

    b. you can set up what is called a dummy projects - this is a project with nothing other than the intro file. And, at all times

    you want to use the intro, you open one of these saved dummy projects and add your media sources.

    A lot of things to discuss. Please fill in some details more and then we can refine the answer for your particular situation.

    Thank you.

    RTA

  • Disable "start a new process with the data of this task.

    Hi all

    As the title says, I would like to disable "start a new process with the data of this task.

    Because I find that it will not work with form preparation process has data, I understand that you can fix by some changes to the procedure of data preparation, but I don't have time at the moment.

    Here is the screenshot to show what is a function 'Start a new process with this task data' in the workspace.

    new_process.JPG

    Concerning

    Bill

    I think your only option is to customize the Worksapce interface.

    I'm sorry.

    Jasmine

  • Why is - FCP so complex: How can I simply leave a project and start a new, a new destination?

    Why is not more intuitive FCP to create the new project and close one on the screen, and then start a new and let me choose where I want to create it?

    I need a 3rd party app to import video content miniDV external HARD disk. Stuff is there for you.

    Now, I open the PCF and try to start a new project. However, this old project still there let me possibility to do it in the same folder: of course, being a tidy person, I don't want.

    I want to create another folder on the external HARD disk.

    What I am doing wrong?

    Hello.

    Keep in mind that a project must reside in an event and an event must reside in a library.

    You can have as many libraries as you want a store them wherever you like (even if you don't save them on a volume of time Machine.

    So start a new project in a new library or in a new event in an existing library to keep things orderly.

    Not sure I understand the part you need a third-party for mini DV application. You shouldn't have anything other than the FCC.

    Russ

  • I deleted my account and lost all my emails, contacts and saved records. I need to recover and start a new account.

    I had a problem with my password and so deleted my old account before starting a new. I didn't know that I would lose all my contacts, files and e-mails. I need to get their back and then set the appropriate settings and passwords on the new account. So the question is "how to get back the old account information?

    lets start at the beginning.

    How do you delete your account. Uninstalling and reinstalling do not affect the data, if your actions are needed to determine if something could stay.

  • Cannot cancel the process of creation of recovery media and start a new

    Help me to cancel the recovery media creation process and it all over again because I found that I need four discs to make the establishment of recovery. I did the first disc, but I need to get an another three discs for the process to be completed. It is said that "creation of media recovery is not complete", if I want to cancel the whole operation and start from the beginning later when I'm ready for it. How I can do this, measures or instructions to solve this problem would be appreciated.

    Computer: HP Pavilion dv6-6120se

    OS: Windows 7 Edition home premium x 64

    You can create only one set of recovery disks. So once the process is complete, you will not be able to create a new one.

  • Why the move, duplicate, delete, hide the section and start the new row disappear and not work?

    on the labels. I fight it like crazy.  I managed to do appear on a div.  But for all the others, it does not show. I'm not sure what you call this tool, but I find it quite aggravating.

    I don't know how else to explain it better, but it's in the previous question.  It must be a common problem because it happens all the time.  I got it to work once by removing the div tag and all related CSS.  I repeated this process on a div tag and it still isn't showing.  Thanks for any input you can provide.

    tool.JPG

    Me

    Looks like you are using page layouts in grid of fluid Legacy feature that is unstable and very difficult to work with.  It is prone to failure, especially when you try to modify the CSS layout with panels of design.

    My advice is do not use FGLayouts or if you do, do not change the CSS layout.  Create a separate custom style sheet for styles of content.

    Nancy O.

  • I bought a new computer and want to put lightroom on it, do I have to cancel my old membership and start a new?

    I bought a new computer and want to put lightroom on it, do I have to cancel my old membership and create a new?

    You should be able to use your existing subscription.  It allows you to have two facilities enabled, so you should be able to keep the two work where you can use as needed.  Just install Lightroom on it the same way as you did initially

  • HP laserjet CP2025 my printer does not recognize my spooler and I tried to remove and download the new drivers with no result. Help, please

    I had recent work done on my computer, which should not affect my printer, but it did.  My system won't let me download a new driver for my HP Laserjet CP2025. It gives me several spooler errors.  I tried the process to start, Control Panel, administrative tools, Services, and then there is no button print spooler Services click on. So in some way it obviously was wiped out when they saved my computer and installed the new screen. HP site doesn't let me download because it sites that this driver is installed with Windows 7. Any suggestions?

    HP does not include drivers for this model, you will need the driver through windows update

    If you say that the print spooler service is not in service, it can help

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/print-spooler-service-missing/ca883d0c-66dB-4599-A886-b8be2ec1ef5f

  • Stop and start the Internet service with X 2000

    I just installed the X 2000 and managed to get my Win7 Home Premium connected to the Internet and also a wireless device. Previously, I had just a modem.

    Sometimes, when my PC is on, I want to disconnect from the Internet and then connect again.  There is an icon at the bottom right of my toolbar that allowed me to connect and disconnect with my old modem, but he seems to know only the old modem.

    Basically it is operated by the boot sequence: all items in Control Panel > network connections > connection broadband.  This function does not work; It tries to connect (via "WAN Miniport (PPPOE)") and gets "error 651: the modem (or other connecting device) has reported an error."

    Can you tell me what, where is the program that seems to start the connection Internet for the X 2000 and if I can change the settings of the Win7 "connection broadband" to use the X 2000?  Maybe the setting "Connect we Demand" in the "basic settings" of the X 2000 is involved?

    JoeCis wrote:

    Forgive me for being dense, but I think I understood that something in response to the "gv".  If I go to http://192.168.1.1/ , and click on the tab "Status", my "connection status" has the ability to 'Disconnect' and 'Connect'  If I click 'Disconnect' my PC will essentially be offline and, later, when I want to go online, I can click on "Connect"?

    1. This will cut the internet connection of the router. He cut the internet connection for all THE devices connected to the router. He kills the internet connection of your iPad, too.

    2. I think that there is no guarantee that the router resets automatically later.

    3. it is not your computer safer. In General, if you get malware from the internet it's while you're doing something in the internet, navigation, for example. So not navigation and does not download emails are for most people means more effective "disconnect from the internet. Cut the internet connection won't make a difference unless your computer is already infected in which case it won't matter either because the malicious software on your computer may also just sit silently and wait for the connection to return.

    4 disconnect the internet link for the safety of your PC is pretty useless. It will not matter. At that time there you do nothing in the internet anyway. And it's not as if a clean computer would suddenly be infected only because somewhere there is an internet connection. Your router is a NAT gateway. Your LAN is already isolated from the internet, which is inaccessible from the internet, unless you have configured port forwarding, triggering or DMZ host.

    5. keep your computer up to date. If you wish, you can put the computer on standby during the absence. Saves energy and not enough good you want to do, even if it won't matter to safety.

  • Cannot cancel the repair and start a new installation

    I encountered an error in my operating system and tried to do a repair.  Now I am locked into installation mode after receipt of an error.  I tried several times to boot from the disc, but it keeps starting in a mode to continue...  Don't Let Me access a format.  I continue to shut himself up about 25% of the windows installation.  How do I start again?

    Boot from to a CD of DBAN and wipe the drive completely (hopefully you have good backups.)

    Looks like a hardware problem.

  • I had an email set in place, but now I need to see it only for history and start a new configuration

    I don't want to lose the old email accounts I can their need in the future, but I now work with Black Orchid sanctuary and will need a clean slate. I just need to be able to open a different Tbird

    In Thunderbird, move all the messages you want to keep your account "local folders".
    You can then delete your account in Thunderbird and re-create the account in any email client that you want to use.
    Make sure you have a backup of your Thunderbird profiles if folder and update Thunderbird.

Maybe you are looking for