APEX 5.0 upgrade from 4.2 successful but APEX does not work

Similar Questions

• the upgrade from VISTA to WINDOWS8 - BACKUP.1 does not WORK

  UNTIL I NEW COMPUTER RUNNING WINDOW8 I MADE A BACKUP OF THE USB STICK 32 OF MY FILES ON THE VISTA MACHINE.

  WHEN I TRY TO RUN PROGRAM BACKUP.1 IS BLOWS UPWARD LOOKING FOR 'MSVCP71. DLL? I LIKE THEM I'M THE ONLY ONE
  NO ONE IN THE WORLD, WHO ATTEMPTED TO RESTORE THE SAVED ON THE VISTA FILES AND YOU WANT TO COPY TO WINDOWS8?

  Hello - for those who have a computer HP Vista MS, they provide a backup system that creates an .exe file called guess what? 'backup.1.exe' and a file 'backup2.fbw '.  Try to use google next time and look it up!

  Maybe you can Google to find an answer.  When was the last time you could make a backup of an any other operating system and restore it on a newer version?  Once you get this answer let us know.
  Guess what this backup is for HP computers running Windows Vista only!  Maybe if you understand how works the backup program you wouldn't be so rough for those of us who are trying to help.  But since you've already made your decision, you can Google how to do.  Sure that no one here will help you now.  Maybe HP will... for a price.

• Downgraded from Vista to XP BUT AUDIO does NOT WORK!

  Hello ~!

  I have a HP Pavilion dv6500 laptop with an AMD processor. Recently, I got drowngraded of Windows Vista to XP by following the guide on this site, but not install the audio drivers (Conexant High Definition Audio Driver) and so I have no sound. It says "ERROR - Driver Installation Failed: could not be found for this driver MEDIA." The same for the Modem driver and the MS - SAU (I tried first by following the instructions). What should I do to fix this? =(

  You use the part 2 of the Guide Downgrade XP drivers? Did you install Conexant using Device Manager as described?

• WRT54GP2 cascade successfully, but VOIP does not work via the LAN port

  Hello

  I searched a lot for a solution to my problem, but have found that it is really above my level of understanding. My apologies if this question has been answered before – if she, I can not find or understand.

  I have an existing wired network that is running on a Netgear WPN824v2. This configuration works perfectly.

  I want to add a Linksys WRT54GP2 to this network to act as a Wi - Fi hotspot and the VOIP connection point. I don't want to replace the Netgear with the Linksys, I want the different VOIP in a physical location access point. I would therefore like to them so cascading: Internet-> modem->-> Linksys Netgear. I do not want to bind the Netgear and Linksys Wireless, but instead, use a cable.

  I actually had this works almost perfectly, using the following parameters:

  NETGEAR IP 192.168.1.1 with wireless off

  Linksys IP 192.168.1.254 with disabled DHCP, active wireless.

  In this way, the Internet works, I can open a session the two routers and wireless of Linksys works very well.

  The problem is that VOIP will not work. I think it is because the connection between the two routers is: port LAN Netgear-> port of Linksys LAN.

  I understand VOIP tries to go through the Linksys WAN port, not the LAN port. If I connect LAN Netgear port-> Linksys WAN port, the phone works indeed but I can no longer connect to the Linksys, wireless router and unable to connect more.

  I would like to VOIP and the wireless work at the same time. Is there a way to get the VOIP by the Linksys LAN port instead of the WAN port? Or is there a way to make wireless and router connection work, if the Linksys is connected to the Netgear via its WAN port?

  Thanks in advance!

  -Jono

  When you wired your VOIP phone directly to the Netgear router you can in fact calls?

  If your Netgear router connect to the Linksys router to the WAN port, it will not work. As you already disable DHCP on your Linksys router and you will not have access to your Linksys router. This type of configuration has some other parameters.

  Connect the Netgear router to router Linksys on the WAN Port, then connect your computer to the router on the LAN Port Linksys. To connect to the Linksys router using default IP: 192.168.1.1 and change the LAN IP of the router Linksys 192.168.2.1 and DHCP must be activate and click on save settings. Once the parameters are now save your network power cycle and all your computers should be able to go online.

• I upgraded from PS5 6 PS and bridge does not open in RAW, failure of the AMT, as you allow me to update

  I upgraded from PS5 6 PS and bridge does not open in RAW, failure of the AMT, also will let me not updated and closes bridge down.

  I uninstalled and reinstalled 3 times and always without success. Any suggestions?

  What system are you on? Did you run the Creative Suite cleanup tool inbetween that installation of your tent? If this is not the case, try this to produce a 'clean' with the default installation. Except that there could be a system specific to the issues at stake, but once again, we would need to actually know what system you are on...

  Mylenium

• just upgraded cs6 to css, now matrox mxo2 does not work?

  I just upgraded cs6 to css, now matrox mxo2 does not work? He still works at the cs6.

  You must uninstall the current driver from Matrox and download and install the latest 7.5 driver that supports CC, as well as CS6, on the PC.

  http://www.Matrox.com/video/en/support/downloads/

  Thank you

  Jeff Pulera

  Safe Harbor computers

• HP 7612: I have a 7612 Officejet from HP that worked wireless but now does not work. When I try to

  I have a 7612 Officejet from HP that worked wireless but now does not work.  When I try to open the Network Setup Wizard a message indicating "wireless communication has been disabled. Can someone please?

  Thank you!

  hhmenar

  Hey @hlhmenar,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with the wireless settings is disabled on your Officejet Wide Format e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see happens shortly.

  Please let me know the results after following the above. If you can run the wireless setup, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Migrated from DPM2010 to DPM2012 and reporting does not work

  Original title: due tapes dpm powershell online

  Hello

  Can someone please? I migrated from DPM2010 to DPM2012 and reporting does not work. The mmc console crashes.

  I intend to remove DPM and re - install, but in the meantime, I was wondering if anyone knows how to use Powershell to know which bands are due online and also the most Due strips to go?

  I searched through Google on all day, but found nothing so thought I would ask here.

  Thank you very much

  Willie

  Hello

  It would be better if you reposted the question to the Forum 2012 DPM.  Professionals will help you resolve the problem you are experiencing.

  DPM TechNet

• I upgraded Qualcom Ateros and now my wifi does not work.

  Original title;

  I upgraded Qualcom Ateros and now my wifi does not work. How is it?

  I've just updated and now my wifi does not work. I trust Microsoft updates... But this time I shouldn't trust...

  Hello

  1. what operating system is installed on the computer?

  2. How is that you have updated drivers for QUALCOMM Ateros?

  3. what exactly happens when the problem occurs? You receive an error message?

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the following link.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Also check out the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• have changed from xp to windows 7, now does not work my usb2 camera

  have changed from xp to windows 7, now does not work my usb2 camera

  original title: usb2 camera

  have changed from xp to windows 7, now does not work my usb2 camera

  original title: usb2 camera

  You must install the driver for Winows 7 for the camera, * if * it exists. Get it at the web site of the manufacturer of the camera.

  Also, note the following:

  You ever need connect your device directly. Buy a card reader for the type of flash card your camera uses (they are very expensive), put the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is much easier and doesn't use the camera battery. I have two cards - one readers that I keep on my desk next to my desktop computer and another that I keep in my case of laptop for use when traveling.

• Hoping to change from English into Chinese language. By Edition-preferences-language setting, but it does not work.

  Simplified Chinese WIN 7,64;

  Install acrobat DC;

  but the system installs the English version by default,

  Hoping to change from English into Chinese language.

  By Edition-preferences-language setting, but it does not work.

  Thanks for the help!

  Cloud of swap language http://helpx.adobe.com/creative-cloud/kb/change-installed-language.html

• After the upgrade of windows (Pinball) 10, when working in Lightroom adjustment brush is not making changes, it is there but it does not work.

  After the upgrade of windows (Pinball) 10, when working in Lightroom adjustment brush is not making changes, it is there but it does not work. Also several times when I go to the library to develop fashionable mode, programs stops. I am really frustrated. Help, please.

  Also several times when I go to the library to develop fashionable mode, programs stops.

  It is often a symptom of an incompatibility between LR and your video card.  If the other suggestions don't help you, go to System Preferences > performance and uncheck use Graphics Processor.

• Reinstall the upgrade Windows 7, XP, needs, but XP does not install...

  My computer crashed.  Got a new MB and HD.  Tried to reinstall my Win7 to know is - what a version upgrade and because of this, we should not the product key XP must be installed first.  Came out the XP disk, tried to install XP.  It downloaded and got to where, say, from windows and got the blue screen of death, twice.  Restarted and win 7 appeared.

  I thought I would restore fair to my disk image.  Backup and recovery"will not read" the disk image.  Tried booting from the disk, the network research, etc.

  How do I get my data back?  How to install win 7?

  Please advise...

  Where is the image of the system stored on an external hard drive? If Yes, then easily restore it, consider the following:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  If this does not work, consider the following:

  Windows 7: clean install with a Windows 7 upgrade Version

• After that upgrade to El Capitan about this Mac does not work"

  After the upgrade to El Capitan by clicking on about this Mac, nothing happens and by double clicking on System profiler I get the error message from the Application "System information" cannot be opened.  I ran disk utility, tried in safe mode and as a guest and all user are the same.

  It is a late 2008 MacBook.  It's on 10.5.8.  I did a clean install of 10.6.3 with upgrades to 10.6.8 to give birth to El Capitan.  According to me, that he was working at that time.  Then, I migrated the user of a backup image of the 10.5.8 account. Who could have when it stopped, but I'm not sure.

  I had two newspapers @ pastbin.com/Mca6LS4H

  Hello mrtrytofixit,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to be able to rely on public services provides your Mac and I want to help you get things working again. With troubleshooting, you have already done, it seems that it is a systemic problem.

  From there, what I recommend is reinstall OS X El Capitan using OS X Recovery on your Mac. It should not remove or erasure of your data, but it is recommended that you make backup before you do incase of an emergency.

  These articles will guide you through the backup and reinstallation:
  Use Time Machine to back up or restore your Mac
  How to reinstall OS X

  If you have any questions or concerns, inform the community. We are all here to help.
  Best regards.

• Re: upgrade SSD on Qosmio X 300-112 does not work

  I currently own a Qosmio X 300-112 with two HD 200 GB at the moment, I would like to upgrade my Qosmio by replacing a HD 200 GB with a 64 GB SSD from OCZ (Vertex Turbo (OCZSSD2-1VTXT60G)), which has also a Serial ATA/300 interface. When I restart my Qosmio, the laptop does not pass the Qosmio welcome screen where you can choose F2/F12.

  When I pres F2 for the bios menu, nothing happens. When I press F12 for the boot menu, nothing happens. If I replace the SSD for the old HD, the system boots normally.

  Question: why I can't spend my Qosmio X 300 with a SSD?

  I m not a technician but there must be a compatibility problem.
  Why do you think you can use any HARD or SSD drive, you can find on the market?

  Best example is the upgrade of RAM. There is the same situation. Some brands and some Rams will work properly and some will not even recognized at startup upward.

  Have you tried to remove both hard drives and check if your laptop starts only with SSD?

• back from Win10 to Win7 now backup does not work

  I tried Windows 10, but had trouble with the resolution of the screen.  I've started using the tool provided by MS Windows7 and now backup gives me an error and does not perform a backup.

  Here is the error I get:

  Windows cannot disable the task of automatic backup for the following reason:

  The task image is corrupt or has been tampered with. (0 x 80041321)

  Try again.

  Can someone please?

  Thanks in advance!

  I finally had to call MS and they have managed to solve the problem.  Somehow when I started again from Win10 to Win7 the Task Scheduler or WindowsBackup was damaged.  The registry has also been affected.  The skills needed to repair this problem was well beyond my capabilities.

  With the assistance of MS, this problem is now resolved.