APIC to level 1.2(3h) 1.3 (2f)

Hello

I want to upgrade the APIC 1.2(3h) to 1.3 (2) and looking at the procedure level and recommended paths to:

https://www.Cisco.com/c/en/us/TD/docs/switches/Datacenter/ACI/APIC/SW/1-...

Apparently from 1.2(3h)...  I can not move to 1.3 (2f)... from 1.2. (2)...:(est-ce exact?)  If so I have to go down first to a 1.2 (2)... :(

Any comment on that, someone at - he already tested 1.3 (2f)... I am very interested in the MicroSegmentation with vMware dVS

Kind regards

Bruno Fernandes

Bruno,

The guide displays the output of 'from' and ' to ' the target version.  The "de" in the minimum required to get out.  In your example 1.2 (2) is the minimum version to upgrade to 1.3 (2).  Release them after 1.2 (2) in the 1.2(2x) or later will be support for an upgrade to 1.3 (2) unless otherwise stated.  You shouldn't be required to downgrade to move to a higher version, unless there is a fault that prevents you.  So you should be good for an upgrade.

I hope that helps!

T.

Tags: Cisco DataCenter

Similar Questions

  • I got to level only the hard drive in my computer and now I keep getting messages that my Windows 7 is not genuine

    I got to level only the hard drive in my computer and now I keep getting messages that my Windows 7 is not genuine
    and my windows update software no longer works. When I check the status of my activation of Windows 7 in the computer
    Properties, it is reported that Windows IS enabled. When I run the Windows activation repair tool it will fail
    and I get the following error messages: 0x80004fe21 and 0xC8000247. I also tried the Windows FixIt tools for
    activation and Windows Update without success.
    Please email me or call me with suggestions or PH 513-289-4785 thanks

    Tool Windows MGA results

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0x8004FE21
    Code of Validation caching online: 0x0
    Windows product key: *-* - B72VQ - G6RKT-G7B6M
    Windows product key hash: ISzyTLRWNXmB8 + BGCAyBkfJVOE0 =
    Windows product ID: 00359-OEM-9804563-10468
    Windows product ID type: 8
    Windows license type: COA SLP
    The Windows OS version: 6.1.7600.2.00010300.0.0.003
    ID: {47CDEE04-15E7-4393-823C-9F19163CCB88} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7600.win7_gdr.110408 - 1633
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 100 authentic
    Microsoft Office Enterprise 2007 - 100 authentic
    2007 Microsoft Office system - 100 authentic
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

    Other data-->
    Office details: {47CDEE04-15E7-4393-823C-9F19163CCB88}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-G7B6M00359-OEM-9804563-104688S-1-5-21-4105253140-3248553093-608739849ASUSTeK Computer Inc.        UL80VT American Megatrends Inc.. 214 20110117000000.000000 + 00061B83607018400F804090409Eastern Standard Time(GMT-05:00)03_ASUS_portable100100Microsoft Office Enterprise 2007129AF2C442EAD0F143bTpphlGMO63Fl + N/RWz9H3zae4 =81599-906-1700076-651751100Microsoft Office system 20071219

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7600.16385

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
    Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00196-045-610468-02-1033-7600.0000-3172012
    Installation ID: 104731195014616722429474505736359264920732256592507294
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: G7B6M
    License status: licensed
    Remaining Windows rearm count: 2
    Trust time: 28/11/2012-09:54:21

    Windows Activation Technologies-->
    HrOffline: 0x8004FE21
    HrOnline: n/a
    Beyond: 0x000000000001EFF0
    Event timestamp: 11:22:2012 12:30
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:
    Altered the file: %systemroot%\system32\sppobjs.dll
    Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
    Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
    Altered the file: %systemroot%\system32\sppwinob.dll
    Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
    Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
    Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
    Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
    Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
    Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
    Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
    Altered the file: %systemroot%\system32\drivers\spsys.sys

    --> HWID data
    Current HWID of Hash: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GFyGfz73n8sErBkTCA4/HhDcKpGyg ==

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC1150 011711 APIC
    FACP 011711 FACP1150
    DBGP 011711 DBGP1150
    HPET 011711 OEMHPET
    START 011711 BOOT1150
    MCFG 011711 OEMMCFG
    SLIC _ASUS_ Notebook
    CO-SUBMISSION 011711 OEMECDT
    LASRYVITRAGE 011711 OEMB1150
    GSCI 011711 GMCHSCI
    SSDT PmRef CpuPm

    The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

    Download and install the latest version of...

    http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

    Then run another MGADiag report and view the results.

  • Auto micro adjusts the input level

    Hi all

    I tried this several times and never seem to be able to find an answer that works...  When I talk in my microphone on my macbook pro, it adjusts permanently the input levels, so in mid-sentence volume varies (always at peak).  It is extremely annoying, and there seems no obvious way to a certain volume of recording.  Any help here?

    Thank you!

    Hi Aprilstern,

    I understand that the input of your Mac's built-in microphone volume seems to be fluctuating when you save. In this case, if you use Mac OS X Yosemite or earlier, you may want to turn off noise reduction in system preferences > Sound > entry.

    OS X Yosemite: adjust the settings of your computer's audio input

    Kind regards.

  • Apple Watch series 2 battery level stuck at 100%

    My new Apple Watch series 2 battery level indicator is stuck at 100%, regardless of the current battery level. I tried to restart the watch and it did not help. Anyone else know this and know a fix?

    Hello

    As you've already restarted your watch, it can help to disable the pairing and re-pair the headset:

  • iOS 10 mail, lack of top-level

    The problem:

    In iOS 9, there was a list of top level of e-mail accounts. We could tap one, which would be a level in and display the tree view of the folders for the e-mail account. In iOS 10, for some reason, Apple dev seems to have deleted the first level as e-mail accounts separates. In place, they have stacked all email accounts on top of the other in one vertical line with no way to close the file trees. Anyone who uses the file trees to organize individual emails into categories and subcategories, and needs to have several emails, knows how much a nightmare this change is to navigate. It would be the same problem as if Apple has decided to remove the desktop Mac file browser bookmarks bar and then put all the files and subfolders in a long list in the viewer instead.

    Question:

    Does anyone know how to get this higher level of e-mail accounts save?

    Can anyone recommend a good mail app that I can replace mail from Apple with if there is no solution?

    Hey, Pataphysicist!

    It seems that after upgrading your iPhone 5 c to 10 iOS, the Mail app is not displayed to e-mail individual records of account which can be extended. I use it often myself, so I'll be happy to help you.

    When I open the Mail app, mine defaults to "All inboxes" and I type "Mailboxes" on the top left. In the next screen, I find 'All boxes' and a list of my email accounts. Just below but who is a grey area that lists the email represents once again, includes a right arrow to access this file tree. If you don't see it is troubleshooting to do. Check your mail application after each numbered step.

    How to back up your iPhone, iPad and iPod touch --before troubleshooting a device, I always recommend a fresh backup. Is better "" than "need."

    1. forcing a nearby app on your iPhone, iPad or iPod touch - first of all, quit the mail application, and then restart your iPhone, iPad or iPod touch - never underestimate the power of a good restart.

    2. reset the iPhone settings - on your phone, go to settings > general > reset > reset all settings. This step will return your iPhone settings by default. Don't forget to write your networks, Wi-Fi/passwords before finishing.

    Be careful and please use the Apple Support communities.

  • How can I configure an iPad to iOS and boot up without any question/entry level?

    Hello

    recently, my greatest pain is the process of upgrading a remote iPad (Yes, for old people like my parents). So if I have an iPad set up in a specific way and there is an update to iOS, it restarts and goes through a series of Questions and comments. I don't mind (it's a lie, I DON'T MIND). For literate people no gadget, it is frustrating and therefore for someone by train - remote to help regain access. The Question is: can we have a configuration that goes through an iOS update WITHOUT asking one thing? Maybe an oke pop-up asking 'agree' with setting level and all other Q later? No PIN code of installation ask if I hadn't any prior to installation? I mean, if you please, seriously? I have install i-device in a specific way and I LIKE IT like that. Include a button in the installer to accept all license agreements or agreements after an upgrade without asking. Unless I have clear. PLEASE? I guess anyone who support parents or grandparents remotely includes part of the simple upgrade...

    So, is there a way of "secret"? It will never be a?

    Kind regards

    Thanos

    Hello. Unfortunately, I do not think that lawyers in the County of Santa Clara would be happy for the prior acceptance of the new T & C. It's probably not possible.

  • Battery Apple pencil level check on iOS10

    Please share how to check control pencil Apple on iOS10 battery level

    I solved this by plugging the pencil of Apple in the Port of lightning on my iPad 9.7 Pro - once I did the battery widget came showing both iPad & Apple pencil battery.

    Note - the Guide Update for iPad for IOS10 have only a reference to the Apple pencil indicating it can be used with application Notes

  • Transfer angry birds levels

    Can someone help me to explain how I can transfer my levels of Angry Bird from my old to my new iPad iPad?  Thanks for your help.

    Read the article, I'm going to the link below.  This is how to set up your new device. Special attention to the #5 stage, which covers restoring your new device from a backup

    Basically you backup your old, then when you set up a new one, you will restore from the backup that you made, it makes your new iPad a close clone of the former.

    I successfully moved games from one device to another, and not lost a thing

    Start with the iPhone, iPad and iPod touch - Apple Support

  • U level of Samsung headset

    I nead my samsung u helmet indicatr power level appears on my iphone if there is a possible way without having to download the app u level of samsung inform me please and if not then how do I download google play store to download the app u level of samsung.

    Hello

    It is not possible to download and install an app on google store to play on an iPhone.

    See this Apple article ☞ Use of Notifications on iPhone, iPad and iPod touch

  • new glass of the iMac is not level

    you come to buy the 27 inch iMac, but shortly after setting up I realized the glass was not level. You can see the metal on one side - but not the other.

    is this normal/acceptable? I am a graphic designer and this type of alignment really bothers me

    I was wondering if others have the same thing? is it too much to expect a perfect on such a huge purchase alignment?

    The glass not in alignment with the image (I can't say your photos)

  • Get consistent audio levels

    I have ben to do a family film on the year for the last 7 years. I'm just an amateur, but I'm a little bit better. This year I really want to improve my skills on audio.  I know the basics, like the volume control for individual items, a beach in a clip of setting and so on, let never greater than 0 db noise and so on. What I would really like some help with is how to get consistent noise levels. What I mean is this: Let's say that I have 30 clips in my calendar, I select all and set the audio to-6 db. Even if the clips now how the same audio level, clips are noisy, and some are low. What I have to go through each item and set - if so what I'd be looking to make all points to the decibel even? Use the waveforms and my eyes and try to align the shapes so that they are at the same level, or is there a simpler solution?

    -No hear/see the chronology of first hand, we can only give limited advice.  But now.

    -Each clip is saved to its own level of gain.  Some are recorded louder than the others.  0 dB means simply the level of this specific "native" clips  The gain setting on all at-6 change each clip-6 dB, it doesn't make them not all limited to-6db.  This is called a limiter filter.  So, if you want to limit each clip compared with - 3db (never press 0, stay below to about - 3 dB max), apply a limiter.

    -Do not rely on the airwaves of the timeline, they are not absolute, but relative approximations.  Go by the counters, and then by the ears.

    -Compressor filter would go a long way to limit upper and lower levels, both win.  Where a limiter limits only the higher gain level.  Beware, a compressor to reduce the dynamic range.  This means that the quiet parts and hard parts approach is at the same level, which causes an artificial sound production.

    -For the application of filters for all clips at once, with the same settings, apply to the first clip.  Copy this clip.  Select all the other clips in the timeline panel.  Use the paste attributes to put in all the other clips.  OR, put all the clips in a compound Clip, apply your effects, keyframes, filters for this compound, to all media at the same time.

    -Actually, a professional like me, takes time to work each clip, or absolute similar clips individually, groups for best results.  Any button 'make fast all at once' will achieve inferior results.

    -Here is a link to the logic manual that explains all the audio effects that are both logic and Final Cut Pro X.  Some very good information here.

    http://help.Apple.com/LogicPro-effects/Mac/10.2.3/

  • How to change the default zoom to 150% level?

    I'm not a geek and I think I want something simple: when I run Mozilla Firefox I want to automatically set at 150% zoom. In other words, I want to remind that my preference is 150% zoom level so I don't if it fix whenever I have run Mozilla Firefox or open the new tab in Mozilla Firefox. Is this possible?
    Thank you
    Mike

    This and other add-ons can do the job,

    NoSquint {web link}
    NoSquint allows you to adjust the text-only and the full page
    (text and images) zoom and color settings levels
    both globally (for all sites) and by site.

  • Image Viewer does not offer native zoom level unless layout.css.devPixelsPerPx is set to 1.0, which makes all the tiny interface.

    Asked me to shake my question in one sentence, so this is.
    Image Viewer does not offer native zoom level unless layout.css.devPixelsPerPx is set to 1.0, which makes all the tiny interface.

    DevPixelsPerPx is - 1.0 by default, which causes Firefox to scale with the parameter of the BONE, which is perfectly fine. The problem is that it causes also open image files and especially the zoom level, nationwide also identical to the user interface. A zoom level is adapted to the screen, the other is native. (One is a magnifying glass with a '+', the other a '-'.) Or rather, the other * should * be native, but in practice, it is not native, is climbed by the setting of the BONE, making it as arbitrary and fuzzy like any other level of zoom, which defeats the whole point and does not allow access to a native scaling in any reasonable way.

    If you want to experiment, here is something you can try, a bookmarklet that inserts a 'Native' button on the page. It takes into account your level of "net" zoom current and reduced the image natural dimensions.

    (1) select and copy the following script:

    javascript:var btn=document.createElement('button'); btn.style.cssFloat='right'; btn.appendChild(document.createTextNode('Native')); document.body.insertBefore(btn, document.body.firstChild); btn.addEventListener('click', function(){var img=document.querySelector('img');img.style.transform='scale('+(1/window.devicePixelRatio)+')';}, false); void 0;

    (2) right-click a task on your bookmarks bar or, if you do not display this bar, click on the bookmarks menu button and right click a place there, and then click new bookmark

    (3) paste the script in the location line

    (4) assign a name like native, and then click Add a bookmark

    While you look at a picture, click the bookmark (let) to inject the button. Then click on the button to resize the image.

    Success?

    If you change the zoom level of the 'page', click on the new button to resize it due to the change.

  • Impossible to connect to the synchronization level

    Firefox wants me to synchronization level. I have been using sync and have an account in Firefox. When I try to connect upgrade, Firefox says "account unknown." In the tab options in Firefox, my account exists and shows my e-mail account. I wanted to check, so I tried to change my password by entering my current password in the "new password" field. Firefox says "you can't use your current password to your new password. This confirms that I have an account and it should work. I tried to fill in the "lost my password" to perhaps have a new one sent to me, but Firefox says that there is no such thing as my email account... But in the tab options in the browser, it does not exist. I don't know what the problem is, how to fix it or where to find help.

    Hello

    I'm glad to hear that your problem has been resolved.

    Please contact the Mozilla Support.

  • How to set the default zoom according to the screen in Linux level?

    Starting from the same account, I can use different types of screens: low and high DPI. I would like to have the font size (and more generally, the zoom level) right of each screen.

    To set the default zoom level, you can set the layout.css.devPixelsPerPx, but we can't define it it fixed-value, which is not OK, because I would like that the value depends on the environment (as for the font size in the menu which is always OK, because it depends on the resource Xft.dpi X 11).

    Note: I have several profiles, while it is not even possible to write a wrapper that could modify the prefs.js file, because I don't know in advance which file would I need to change.

    What can I do?

    One possibility would be to use the mozilla.cfg file in the Firefox program folder.
    This file can contain JavaScript that runs with full chrome privileges and it it not difficult game of the pref layout.css.devPixelsPerPx to a correct value for the screen currently attached.
    You will need to know how to calculate the dimensions of the screen.

Maybe you are looking for