App Gallery hangs when you try to save the changes

Similar Questions

• Lightroom will stop when you try to save the image to the Gallery

  Lightroom will stop when you try to save the image to the gallery. It just stops without warning. And he always seems to be synchronization?

  I have a Huawei p7 Please help!

  Hi AnnCicilie,

  Make sure that if the application is up to date.

  If this does not help, could you please share the newspapers of diagnosis by PM so that we can check more?

  Follow these steps to collect logs:

  • Open Mobile with Lightroom application
  • Click on the LR icon at the top left:

  

  • Press and hold the Lr icon at the top left that mentions your Adobe ID and click on generate Diagnostic log

  

  • Send email to yourself so that you have them on the desktop and then, share with me by PM

  Concerning

  Claes

• Error 'UID without owner referenced. ' UID: U3020 class: ImageItem "when you try to save the site Muse CC converted in 2014 of the Muse

  Error 'UID without owner referenced. ' UID: U3020 class: ImageItem "when you try to save the site Muse CC converted in 2014 of the Muse

  It works very well in my CC version. But will not let me save my old site. Everything I do is open and it says converted and record that it won't do anything and I tried everything

  I suspect that you have purchased the model 'AgencyVisual.muse' of the forest of theme? It seems that this file contains minor corruption which requires repair by the development team. We have tried to contact the author of the model to see that the original model is repaired, but have not yet received any response.

  If you send your .muse file to [email protected] as well as a link to this topic, we can repair the file and return it to you.

• Error connecting to server ADI App client file when you try to publish the report.

  Our users have intermittent problems when you try to publish their customer ADI process to Excel reports. They receive the error:
  
  "An error occurred while trying to establish a connection to file Applications server. There may be a network configuration problem, or the listener of the AMT may not work. "Nodename:
  
  The problem is that this question will be present for a user, and then for no reason that the user will be able to publish reports again. Several users will get this error or a user will be able to publish reports. The only consistency is when he mistakes that they get this message. The listener seems to be running as well.
  
  We run 11.5.10.2 and ADI version: 7.2.12
  
  Any help or advice would be appreciated.

  "An error occurred while trying to establish a connection to file Applications server. There may be a network configuration problem, or the listener of the AMT may not work. "Nodename:

  Please review these documents of MOS.

  ADI: Troubleshooting problems connecting with ADI/GLDI [ID 70669.1]
  Troubleshooting the "error occurred while he was trying to establish a connection to file Applications Server' [ID 117012.1]
  How to validate FNDFS for Applications Desktop Integrator - ADI [ID 364796.1]
  ADI: Unable to display reports on ADI [ID 1018797.102]
  Can not view reports through ADI/Application Center [135128.1 ID]
  ADI RRA:Prefix when connecting to the server with Muiltple Apps Instances [ID 201492.1]
  ADI Application file server [ID 146220.1] connection error

  Thank you
  Hussein

• Windows guard stop my PowerDirector 8 program when I try to save the changes.

  I work with the Director of Power 8.  When I try to save changes I get the error message "a problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available.  I am able to edit and record other PowerDirector projects.  I put a lot of time in this project.  I need to record a last few changes.  Any ideas on what could cause this problem?

  I would recommend in this by looking at the Power Director site: http://www.cyberlink.com/support/search-product-all-faq.do

  Also, make sure that it is uptodate.

• error when you try to save the .ai file

  Hello

  I created a business card in Adobe Illustrator CS2 and now I want to change my email address on the map. I did this and tried to save it, but when I made this error message came:

  "There is no path.

  I don't know why it does this. I want to be able to edit and save more later on if need be then, how can I fix? Ideas, any help would be greatly appreciated. Thank you!

  ashmic19

  Check your paths of old type, retype you the original line on or did you press return back on the orig line until there was nothing out there, created a new line of text and type in the new address?

  That's what I think might happen watch in work/overview.

  Try to Clean up, remove unused marks.

  Also check your hard drive, you're out of space?

• RECEIVEING an error message when you try to save the web page

  Plan of care product C:\Users\Ann\Desktop\Walmart - Confirmation_files\javascript.js could not be saved, because the source file could not be read.

  Try again later or contact the server administrator.

  Is the message that I get when I am trying to save a web page.

  I tried to reset my computer, turn off the fire wall, looking for the Add-ons and I can find no reason that this started to happen.

  I was able to fix the problem in safe mode with disabled extensions. Thanks for all the help!

• Error when you try to save the PDF in Acrobat Pro

  I hope this is the correct community to post this question.

  I have a PDF file. When I go on record as another / reduce size PDF, I get this message: Please check if you have permission to write to this location and have enough disk space.

  I have a lot of disk space, and it's my computer, so approval is a given... Any suggestions as to what will help?

  Thank you.

  Wonderful. In fact, I have saved the file, made some changes and was able to record that I wanted to. Thank you

• Error 0 x 80070534 when you try to save the system from Vista to XP Pro

  Hello

  File sharing works very well between my computer laptop Vista Business SP2 and my desktop XP Pro SP3 IE. Can I manually read/write files on the desktop from my laptop and vice versa.

  I want to implement Vista Backup and Restore Center to create a backup of my Vista files on the desktop computer XP Pro.

  Backup and Restore Center, I specify the location of the desktop computer as backup destination:

  \\DESKTOPXXX\BackupFolder (I manually tested this place can I read/write files on this site of the laptop.)

  After that, Vista invites me for a user name and password for the Office:

  Username: MSHOME\Dan (MSHOME is the name shared by two PCs working group)
  Password: xxxx

  This is where I get the error:

  No mapping between account names and security IDS was done. (0 x 80070534)

  No idea why?

  See you soon,.
  Dan

  PS. I use a wireless network.

  Okaaaay, it seems I got it work by using the user name "Dan" rather than "MSHOME\Dan".

  Maybe it's just a stroke of luck, I'll post here if the problem comes back again.

• Robocopy hangs when you try to copy a file which in use

  Hello

  I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.

  Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?

  Thank you

  Jason.

  "There is no need of me a pause in my script"-Yes, I understand [and should have done before].

  I just tested a network for the first time operation.  It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put.  {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}

  I read that you have provided the link.  This suggests that there is no solution.

  - - - - - - -

  You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you.  The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.

  1 I xcopy all the files in a folder internal InterimBackup first.  Can I use XCopy or RoboCopy to send InterimBackup to the real destination.

  2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy.  [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]

  So I precede this with

  0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst

  The result is that whole process always ends but it only includes the last Outlook.pst that was available.  So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.

  If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application.  Subsequent operation of RoboCopy would always succeed with the same possible omission.

  The downside of this might not suit your overall goal.  You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included.  You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.

  You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.

  I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder.  But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.

  As I say, it may not meet your needs.

• HP Officejet 6500 E709n: HP Officejet 6500 E709n hangs with mac (Mavericks) when you try to save changes to scan destination

  HP Officejet 6500 E709n hangs with Mac (Mavericks) when you try to save changes to scan destination. That's all!

  What is the problem of HP?

  Hello

  What application you want to scan to?

  Try to install the HP Easy Scan software, it will be installed in the Applications folder:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  You see a difference using?

• I 200918 error when you try to save a task DAQmx

  I have a Labview application 7.0 that creates and registers a task DAQmx (DAQmx version 8.0).  I can create a new task, but when I try to save the task I have Labview 200918 internal error. So far, this has worked very well on several machines but recently received this error message on a new Windows XP SP3 machine running.  I am able to create a backup task by using MAX (version 4.3).  Anyone know this kind of error before?

  Kind regards

  David

  This code corresponds to what is now an external error code.  The text of the error is:

  "Global channel name specified is already used for a task in the area of data.  NOR-DAQmx does not support global channel names and overlapping tasks.  Select another name. "

  I don't know why this code appears as an error internal to you, but the new text of the error, you should get going.

• Computer hangs when you try to watch live TV through windows media centre__

  Computer hangs when you try to watch live TV via windows media Center
   
   
   
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 3081
  More information about the problem:
  BCCode: a
  BCP1: FFFFFA600C193FF8
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF8000233499E
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini112509-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-132569-0.SysData.XML
  C:\Users\user\AppData\Local\Temp\WERCC53.tmp.version.txt
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
  

  Hi Eddie Hunt

  Welcome to the Microsoft Answers Forum!

  I suggest you try this method and check if it is helpful

  Method 1:

  Start your computer in a clean boot and check what third-party software or program is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  III. in the general tab, click Selective startup.

  IV. under Selective startup, clear the check box load startup items.

  v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  VI. click OK.

  VII. When you are prompted, click on restart.

  VIII. after the computer starts, check if the problem is resolved.

  If the problem is solved, check what third-party software or program is at the origin of the problem, referring to the link given below:

  Clean boot

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  i. Click Start, type msconfig.exe in the start search box and press ENTER.

  II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  III. on the general tab, click the Normal startup option and then click OK.

  IV. When you are prompted to restart the computer, click on restart.

  Method 2:

  Install the latest codec package and check if that helps, link below will help you with the same:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en

  Method 3:

  Update the graphics card. Steps to update the graphics card:

  i. click on start, type devmgmt.msc and then on enter.

  II. develop the graphics card and right click on the sub element and click on update driver.

  Link for reference: problems with watching TV on your computer

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I

  I'm currently developing apps on my creative cloud. My account has two subscriptions and I am trying to use one of them, but after that download the message of "no subscription found" apps will appear when you try to license. How can I access the apps? I use a Mac

  Hello

  Please see connect and disconnect activate Cloud Creative applications

  Advanced solutions for connection with Adobe Creative Cloud and Creative Suite applications errors

  Concerning

• I get the error message: 1 when you try to download the creative application of cloud. I tried rerun the installation and use of the cleaning tool. I can not uninstall and reinstall the app because there never have down loaded initially.

  I get the error message: 1 when you try to download the creative application of cloud. I tried rerun the installation and use of the cleaning tool. I can not uninstall and reinstall the app because there never have down loaded initially.

  Try with the solution provided in the link below:

  ERRO 1: Creative cloud cannot install