App (other than Message) to send SMS

Similar Questions

• Message cannot send sms to contacts

  Hello

  I had problems with iMessage for centuries, but this time he makes me crazy. I have a few contacts where I can not simply opt to send the message in the form of SMS, only iMessage. Received SMS messages are carefully updated in iMessage, I can make and receive phone calls, but simply cant't send as SMS. See the image below. Note fortunately to dial, but refuse to send messages in the form of SMS.

  I tried to delete the contact, contacts of disconnect to iCloud and back in (on the phone and iMac), disabled in iCloud, rebooted the iPhone, restarted iMac and which do not. Nothing helps.

  Someone has any idea how to do this job?

  

  Thanks in advance,

  Mike

  iMessage is a service and messages is an application used for the iMessage service.  Are you sure that people that you try to send a SMS accept SMS messages?  Have you tried to send an SMS to the same consignee using the iPhone?

• Make messages by default SMS app when not on wifi

  Hi all. I just had a question about iMessage. I have a 6 s iPhone running iOS 10.0.1. I have no data. I love the new iMessage, and I would like to try it out, so yesterday I turned on iMessage. However, I was in a place with no WiFi, and one of my friends sent me an important through iMessage message. He said it was delivered, but I do not have it. I know that there is a way to send SMS iMessage by double tapping by clicking send as SMS, but it would be too difficult to get all of my contacts with the iPhones do it for me. Is there a way to make sure that when I send messages on WiFi to other users of the iPhone, the default values of the iMessage message, and when I'm not on WiFi, they by default for SMS? Or something like that?

  Thank you very much.

  N

  In theory, if you are not connected to data, Messages must use the WiFi. However, it is not always instantaneous. And, if you have other devices connected to the same Apple ID as an iPad or a Mac, you'll find that this does not always work as you want. I highly recommend that if you have not given cell phones on your iPhone, you disconnect from the iMessage and only use SMS.

• My iphone 6 is possessed!  He opens my apps, send SMS and call my contacts, my games.  Frustrated!

  My iphone 6 is possessed!  He opens my apps, send SMS and call my contacts, my games.  Frustrated!

  Basics of the manual are restarting, reset, restore.

  Start there.

• What are some editing apps good free photo for Mac, other than the Photos of Apple?

  Hi everyone, I'm looking to see what free apps, you guys use for editing photos?  I have a photography class to come and play with options other than the use of pictures of the Apple app.  Nothing against the app, I just learn more.  Thank you.

  Strange question to the users of the forum pictures - of course, the answer is Photos for Mac

  Photos is optional and if you don't like it, then, Google is your friend

  LN

• How can I send sms text message from my Windows 7Pro PC to any mobile phone?

  SMS from the mobile phone PCto

  How can I send sms text message from my Windows 7Pro PC to any mobile phone

  By electronic mail.  Exact address depends on the carrier.

• Sending SMS/BBM messages after an event takes place

  I make an application that would require for BBM/SMS to send to contacts specified when an event takes place on the device.  For example, the user has the configuration of the application to run in the background, and when some time passes, to send a BBM, SMS or e-mail message with a predefined set of providers chosen in advance by the user.  Is it possible to do this?

  You can send the BBM messages programmatically.  You can call BBM using the framework of the call with a pre-filled for the user to send message.  But still, the user must press the Send button.   You can send SMS messages directly from your application however.

  Note also that full background applications are not yet supported.  If the user starts the application and it continues to run, he could send TEXT messages.  But it would be necessary to continue to run (indicated in the list of running applications).

• We can send SMS messages to a BB device programmatically?

  Can someone tell can send us SMS to a BB device programmatically? If Yes, then how it is possible?

  MessageListener can be used to read the SMS message and make a small operation on the device?

  Not the answer to your question. But I think it will give more of your understanding of the problem.

  There is a way to send sms via applications through what we call servers SMS-gate.

  Usually the server SMS-door installed on the site of a wireless provider.

  And if you want to use this server, you must sign the contract with your provider of wireless and get access to this server. You will get technical documentation - addresses, protocols, URL, etc..

• BlackBerry Smartphones cannot send SMS messages

  Hello! I have my Storm a month without problems, but today I can not send SMS messages, I received them well.

  I get a red X and this message: «status of equipment Mobile failed»

  I tried to find a solution to the technical center, without success

  Someone who can help me?

  Thank you!

  Vivi

  Equipped with a device of traction battery reset for 30 sec. And check the sending of SMS texts.

• How do install CC Desktop and Apps on one drive other than "C"?

  After several problems, help forum, and finally an Adobe of the India technology technology was able to install Desktop CC.  The technology had to make hidden files visible and change an existing file OO? (I don't remember the last two letters") oo? _OLD.  Maybe this will help someone else.

  Maybe I'm wrong, but that the technology has been downloaded and installed Desktop CC, I saw no option for which drive to install on.  I am trying to install apps CC.  I see no other choice as to which drive to install the software.

  I have my computer as C: operating system configuration; D: sctratch; E: programs; F:, G: cd/dvd files.

  How can I install Desktop CC to 'E '?  If done, CC apps automatically install on 'E '?  CC desktop will work properly in other than the drive "C"?   CC apps will work properly on other than the drive "C"?  If CC Office should always be on 'C', I can install applications CC stll on 'E '?  I get no dialog or window with an option of where to install all programs CC.

  You can install apps to another location by selecting a folder in the LTCC prefs LTCC itself will always install on the root of the system, as well as some components Adobe shared globally. Has always been so.

  Mylenium

• How can I the creative cloud Installer and apps install on another drive other than my main C drive?

  I struggled to find out how I can put the applications installation and adobe on one other drive other than my C drive. Please help me. My C drive becomes too full.

  The CC itself application will always install on the root of the system drive, as well as several shared components. Once the CC application has been installed, you can choose a different location for the main installers in the application settings.

  Mylenium

• My Iphone / imessage / facetime continues to send sms without authorization

  Hello

  I use the Apple as the Iphone products for centuries. Eversince I have spend provider to another (which has no contract with apple), my custody Iphone sms sending abroad without knowing me, until I receive my Bill.

  All messages are a number in the United Kingdom. I tried to find out which application is causing the problem. To read other users ' questions, I guess that's iMessage.

  I use my phone for sms not talkative iMessage. All the app are disabled, iMessage and FaceTime. How do these apps still send sms? I never authorized iMessage or any application to send sms. Apple why phone texting without knowing me?

  How can I block apps to send sms? If anyone knows how, please let me know. It is ridiculous that I have to pay for something I don't use. If apple likes to make apps that sends messages, apple should foot the Bill for the users.

  If this issue cannot be resolved, then I need to consider using android.

  See you soon,.

  A very frustrated iphone user

  frustrateduser_1_2_many wrote:

  Hello

  I use the Apple as the Iphone products for centuries. Eversince I have spend provider to another (which has no contract with apple), my custody Iphone sms sending abroad without knowing me, until I receive my Bill.

  All messages are a number in the United Kingdom. I tried to find out which application is causing the problem. To read other users ' questions, I guess that's iMessage.

  I use my phone for sms not talkative iMessage. All the app are disabled, iMessage and FaceTime. How do these apps still send sms? I never authorized iMessage or any application to send sms. Apple why phone texting without knowing me?

  How can I block apps to send sms? If anyone knows how, please let me know. It is ridiculous that I have to pay for something I don't use. If apple likes to make apps that sends messages, apple should foot the Bill for the users.

  If this issue cannot be resolved, then I need to consider using android.

  See you soon,.

  A very frustrated iphone user

  First, there is no Apple in this technical forum from user to user.

  Second we user do not care if you go to an Android phone, you are more than welcome.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

  You use a carrier not supported iphone as you said in your post, this is why he sends sms to the number to the United Kingdom.

  Take your problem with your phone operator.

• Send SMS with Wifi (iPhone 6)

  I'm in a restaurant with no cellular service, but they have wifi.  I can't send a message to a droid.  What technical problems that prevent?  Seems to me that once you get the text (data) on a network, it should be able to be converted (if necessary) and delivered to a number?  What Miss me?  Thank you

  SMS (text messages) use the cellular signal. Only the Apple iMessage can send messages to other Apple devices using data other than cell phones.

• Sending SMS from the Defy: two questions

  I've been with the Defy for a few weeks and I love the phone, but with all the power of Android, I lack some features, that I used to have in my old classic 'Hynek '. Perhaps they are there and I just have not found, but believe me, I really look...

  Two of them are currently particularly annoying when sending SMS. Here in Brazil, the long distance dialing format includes a code of long distance provider of your choice (specifically, you must dial 0 + code of the carrier + area code + phone number). So, I added all the entries on my directory, including the carrier code which usually has the lowest rates. But this format does not work to send text messages. to do this, use + 55 (the Brazil country code) + area code + phone number. There are a couple of other formats that the carrier has properly analysis and sends the message (for example, to send messages to phones in the same area code, just without any codes work phone number), but the format used for long distance calls cannot be used.

  My old phone had a feature that allows you to modify the number before sending the message, and I used that. With the Defy, I'll have to look up the number in the phone book and type it in the appropriate format, rather than choose the contact directly here as a destination. Is there a way to change the number before sending on the Defy? I tried, but it only allows me to delete this contact or include another. I also thought to including an additional entry phone just for SMS for each contact in the phone book, but it would be too complicated.

  The second feature is the ability to set the phone to send a request for confirmation of delivery as well as the message. As soon as the message was delivered to the recipient's phone, I got a message of confirmation by the carrier. While most of the messages are provided instantly, some, especially to another carrier, or if the recipient's phone is turned off or out of coverage in time, may take longer and sometimes it is important to know if the other person actually received it. My Defy not to do and I couldn't find any configuration option to allow this. I'm on the same carrier as before, so the feature support is not a problem.

  So, anyone know of a way to change the phone number before sending an SMS and request a delivery confirmation message?

  Thank you very much.

  Thank you, j0h4n. In the end, I solved both problems by simply using a different application. What I've explored, there doesn't seem to be a way to change the phone number of the addressee on the fly with the standard application, and everything by asking a delivery report is possible, he is not required by default, may not be configured to be requested by default and must be done individually for each message sent.

  But I explored the Android Market, try Handcent SMS and SMS GO and found both to be excellent. Both allow changing the number on the fly and NDRs that would be asked by default (in addition to many other interesting features). Since they have interfered with each other, I had to choose an and kept GOING SMS, I found a bit niftier to use and implemented the number editing best feature (Handcent editor a bit confused with this and I had to be careful when editing).

  Obviously, English isn't a problem for me, if not Handcent would have the head, because it is available, located in Portuguese (and many other languages), while SMS GO is only available in English and Chinese. But as it is, I liked it. I would still recommend Handcent and users should try both to see which they like best.

• When sending sms, some no-contact. SMS and some no-contact. not get?

  Hi all

  I developed the sms application, when I send the SMS from this application, some no-contact. to sms but some no-contact. do not get.

  can someone help me?

  concerning

  Savi

  Hi all

  I solved this problem. now I can send message to anyone of this sms application.

  If anyone need this app, I'm writing this request here... This works perfectly...

  package sms.savi;

  Net.rim.device.api.ui import. *;
  Net.rim.device.api.ui.component import. *;
  Net.rim.device.api.ui.container import. *;
  Javax.microedition.io import. *;
  Import Java.util;
  import java. IO;
  Javax.wireless.messaging import. *;

  class SmsDemo extends UiApplication {}

  Constants
  // ----------------------------------------------------------------
  private static final int MAX_PHONE_NUMBER_LENGTH = 32;

  Members
  // ------------------------------------------------------------------
  Private EditField _sendText.
  Private EditField _address; A phone number for outgoing SMS messages.
  Private _status EditField.
  Private ListeningThread _listener;
  private SendThread _sender.
  private StringBuffer _statusMsgs = new StringBuffer(); Caching for
  improved
  performance

  private MessageConnection _mc;
  Private boolean _stop = false;

  _sendMenuItem private MenuItem = new MenuItem ("send", 100, 10) {}
  public void run() {}
  String text = _sendText.getText ();
  String addr = _address.getText ();

  If (text.length > 0 () & addr.length () > 0) {}
  Send (addr, text);

  }
  }
  };

  Static
  // ------------------------------------------------------------------
  private static String _openString = "sms: / /"; See connector

  information on the implementation.

  Public Shared Sub main (String [] args) {}
  Create a new instance of the application and the beginning
  the application on the thread of the event.
  SmsDemo sms = new SmsDemo();
  sms.enterEventDispatcher ();
  }

  Inner classes
  // ------------------------------------------------------------
  private class ListeningThread extends Thread {}
  synchronized Private Sub {} stop()
  _stop = true;

  try {}
  If (_mc! = null) {}
  Close the connection so that the thread will return.
  _mc. Close();
  }
  } catch (IOException e) {}
  System.Err.println (try ());
  }
  }

  public void run() {}
  try {}
  _mc = Connector.open (_openString) (MessageConnection); Closed
  by
  the
  Stop()
  method.

  for (; {
  If {(_stop)
  return;
  }

  Message m = _mc.receive ();
  receivedSmsMessage (m);
  }
  } catch (IOException e) {}
  Probably the stream has been closed.
  System.Err.println (try ());
  }
  }
  }

  /**
  * A simple abstraction of an sms message, used by the SendThread class.
  */
  private static final class SmsMessage {}
  private String _address;
  private String _msg;

  private SmsMessage (String address, String msg) {}
  _address = address;
  _msg = msg;
  }

  Private Message toMessage (mc MessageConnection) {}
  TextMessage m = (mc.newMessage) (text)
  MessageConnection.TEXT_MESSAGE, ' / / ' + _address
  + "");
  m.setPayloadText (_msg);

  return m;
  }
  }

  /**
  * A thread to handle outbound transactions.
  */
  private class SendThread extends Thread {}
  private static final int TIMEOUT = 500; MS

  Create a vector of objects SmsMessage with an initial capacity of 10.
  For this implementation, it is unlikely that more than 10 messages
  queued at a time given.
  private vector _msgs = new Vector (10);

  volatile Boolean _start private = false;

  The applications are pending.
  private synchronized {void send (address of the string, String msg)
  _start = true;
  _msgs. AddElement (new SmsMessage (address, msg));
  }

  Termination of the thread.
  synchronized Private Sub {} stop()
  _stop = true;

  try {}
  If (_mc! = null) {}
  _mc. Close();
  }
  } catch (IOException e) {}
  System.Err.println (e);
  updateStatus (try ());
  }
  }

  public void run() {}

  for (; {
  Adjustment of the wire.
  While (! _start &! _stop) {}
  Sleep for a bit so we don't spin.
  try {}
  Sleep (timeout);
  } catch (InterruptedException e) {}
  System.Err.println (try ());
  }
  }

  Exit condition.
  If {(_stop)
  return;
  }

  While (true) {}
  try {}
  SmsMessage sms = null;

  synchronized (THIS) {}
  If (! _msgs.isEmpty ()) {}
  SMS = _msgs.firstElement () (SmsMessage);

  Delete the item so that we don't send it again.
  _msgs. RemoveElement (SMS);
  } else {}
  _start = false;
  break;
  }
  }

  _mc. Send (SMS.toMessage (_mc));
  _mc. Close();
  System.Exit (0);

  } catch (IOException e) {}
  System.Err.println (e);
  updateStatus (try ());
  }
  }
  }
  }
  }

  private class SmsDemoScreen extends form {}

  Constructor
  private SmsDemoScreen() {}
  Dim str As String = "8971833590";
  String = msgStr "How are you?"
  setTitle (new LabelField ("Demo SMS", LabelField.USE_ALL_WIDTH));

  _address = new EditField ("to:", "", MAX_PHONE_NUMBER_LENGTH,)
  EditField.FILTER_PHONE);
  Add (_address);
  Add (new SeparatorField());
  _sendText = new EditField ("Message:", "");
  Add (_sendText);

  /*
  * _status = new EditField(); Add (_Status);
  */

  addMenuItem (_sendMenuItem);
  }

  /**
  Prevent save them dialog box is displayed.
  *
  * @see net.rim.device.api.ui.container.MainScreen #onSavePrompt)
  */
  public boolean onSavePrompt() {}
  Returns true;
  }

  /**
  * Close the application
  *
  * @see net.rim.device.api.ui.Screen #close)
  */
  {} public void close()
  _listener. Stop();
  _sender. Stop();
  Super.Close ();
  }
  }

  Constructor
  private SmsDemo() {}
  _listener = new ListeningThread();
  _listener. Start();

  _sender = new SendThread();
  _sender. Start();

  Screen SmsDemoScreen = new SmsDemoScreen();
  pushScreen (screen);
  }

  /**
  * Update the GUI with the data just got.
  */
  {} private void updateStatus (final String msg)
  invokeLater (new Runnable() {}
  public void run() {}
  Delete the string buffer.
  _statusMsgs.Delete (0, _statusMsgs.length ());
  _statusMsgs.Append (_Status.GetText ());
  _statusMsgs.Append ('\n');
  _statusMsgs.Append (MSG);
  _Status.SetText (_statusMsgs.ToString ());
  }
  });

  }

  /**
  * A simple formatting of received sms message.
  */
  Private Sub receivedSmsMessage (Message m) {}
  String msg_app = m.getAddress ();
  Address of string = m.getAddress ();
  String msg = null;

  If (m instanceof TextMessage) {}
  TextMessage tm = m (text);
  MSG = tm.getPayloadText ();
  }

  StringBuffer sb = new StringBuffer();
  SB. Append("Received:");
  SB. Append ('\n');
  SB. Append("destination:");
  SB. Append (Address);
  SB. Append ('\n');
  SB. Append("Data:");
  SB. Append (MSG);
  SB. Append ('\n');

  updateStatus (sb.toString ());
  }

  private send Sub (String addr, String data) {}
  _sender. Send (addr, data);
  }
  }

  Of

  Savi