App Store takes awhile to load iOS updated 9.3.2 to level after

Similar Questions

• App store takes to always load can not download a purchased list player

  As the subject says about an hour ago I started to have problems with a drive (installed from the app store) does not. I had to keep killing the process command line. Finally, I uninstalled the app. Then when I went back to the App Store and it starts on the 'Featured' page that takes forever to load, and even in this case it isn't updated graphics associated with a given application. I looked for a drive and you click on install. Then it fails and tells me to look in the purchased applications (where I was already) and try to reinstall. It seems that there is only email support community or discussions to resolve issues that are related to a package of basic integrated with Apple products, be they iOS, laptop or desktop ridiculous devices. Is that all I can do to get this resolved in a reasonable time?

  See if OS X needs to update.

  Open the App Store, and then select the updates menu.

  The El Capitan v10.11.6 update is available.

• How to change Apple ID of App store at the time of the update of the app I have already change the ID in establishing air & app but still old ID think to update the application

  How to change Apple ID of App store at the time of the update of the app I have already change the ID in establishing air & app but still old ID think to update the application

  You must delete and re-download this request.

  (140006)

• I can't download anything in the App Store, I can not still to update anything without entering my card info and he says "he has a problem of billing with a previous purchase.

  I can't download anything in the App Store, I can not still to update anything without entering my card info and he says "he has a problem of billing with a previous purchase.

  There is something probably wrong with your credit card you enter. Check your previous purchases and know what the problem was. If it does not call apple for more information support. Good luck

• App Store - we could not complete your update

  I'm looking for ideas on the next few steps.  When I try to update software via the App Store (any software that has an update, including pages, Xcode, or try to get El Capitan) I get the following message ", we could not complete your update.  The distribution of product file could not be verified.  It may be damaged or is not signed. »

  My computer:

  -Running OS X version 10.10.5 Yosemite

  -Mid-2012 Macbook Pro

  What I've done so far:

  -Used Time Machine to go back in 6 weeks for previous backups... same problem

  -Rebuilt the Spotlight Index

  -Activity monitor used to kill and restart the following process: Storeaccountd, storedownloadd, storeassetd, storeinappd

  -Removed existing App store Cache by removing the uid/users / / library/caches/store *.

  -Removal of existing preferences to store the App by removing the uid/users / / library/preferences/store *.

  Unfortunately, no success in all these cases.  You have any ideas what to do next?

  I also tried...

  -Reinstall the operating system from scratch.  This does not solve the problem

  Re-boot in safe mode.  Safe mode allowed me to accept updates from the App Store, but it would be really nice to not be in Mode safe all the time.

  You have ideas on what to try next?

• Unable to connect to the App Store since the upgrade to IOS 10

  Tried to restart App Store and phone. changed the password and recorded out and back in but still unable to connect. We will, get apps but when I try and download it keeps asking for the password and say that it can not connect. Someone at - it advice?

  Hello CT05,.

  Please ask for assistance with the App Store here in Apple Support communities. I understand how it is important to be able to download my new or existing applications on the App Store. Please try these things to see if we can get this to work for you as expected!

  The first thing we want to make sure is that all your data is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Once you have your backup, please go to appleid.apple.com on your computer or via a web browser. Log in with the Apple ID you are trying to connect to the App Store with. If it connects, take note of the Apple ID and password. Try the same information on the iPhone.

  If this still does not work on the iPhone, please click Settings > Wi - Fi and turn Wi - Fi off. See if you can access the App Store on your cell data. If you can, it means that it some security on the wireless network that you are connected to that is blocking your connection. You won't be able to do this unless you use your cellular data or move you to a new wireless network.

  If you are not able to access the App Store on cellular or wireless data, please open this help article: If your iPhone, iPad or iPod touch connects to a Wi-Fi network. Check the section still not 'connect?' and look at the instructions to reset the network settings. What this does is actually reset some of your default network settings. You have to reenter your password to connect to wireless networks once this is done. Try again.

  Thanks again and have a great rest of your day.

• Safari and App Store are not open. Recently updated to El Capitan 10.11.4

  Safari and App Store are not open. Safari icon will bounce back and not open. App Store comes up with "App Store close unexpectedly"

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• How can I stop the app store of notifying me of an update?

  I can't update one of my apps on the app store, but the notification won't disappear.

  What happens when you try to update? Are you sure that it isn't already aware?

• PC breaks down. Apps to take awhile so that it starts. No recovery accepted

  PC does not flatter collection jurks by apps takes forever to starup tried different things but was fail with all. I have norton 360 and microsoft fix - it run them both several times, really frustrated. Help someone.

  Hi RAYMONDROY-438.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         Have what troubleshooting measures you tried?

  ·         Are what fixit you referring?

  ·         Are you able to boot to the desktop?

  ·         What is the brand and model of the computer?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Run the disk check to check for possible errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• my virtual memory is low, I scan my computer with fast scan.my takes awhile to load what should I do?

  Why dose it take a long time for my computer to load with virtual memory is low?

  In this case, please see the link below. In the link provided, please follow the instructions under "fix it myself. That should solve the low virtual memory error temporarily.

  http://support.Microsoft.com/kb/826513

  For a permanent solution, I highly recommend that you upgrade your computer's memory.

• When I start first to computer it takes awhile to load up, however when I quit and restart it is really fast

  my pc is very slow on start up so I start usually let run for 10 minutes and then close and restart. It then starts ok but the internet connection is pretty poor, better wi fi adapter would make better

  Hello

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Method 1:

  Disable auto restart in case of system error. Follow the steps in the link to do the same thing:

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Search for the exact error message you get to do this in the event viewer:

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Check out this link to open the event viewer:

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  Method 2:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  If you are facing the blue screen, go through the steps mentioned in the link below:

  Method 3: Resolve stop (blue screen) errors in Windows 7 http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

• Status Bar disappears after iOS updated 9.3.2 at level

  Given that I have improved my 6s iPhone to the latest iOS (9.3.2) my status bar disappears at random (see photo below).

  If I lock the phone and unlock the status bar returns.

  All this experience? Is there a solution?

  

  Thank you

  Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

• Car game no longer works after my iOS updated 9.3.2 to level today

  How can I fix?

  works for phones that have not upgraded to this version of iOS

  Try a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. You won't lose anything.

  If a force restart does not help, try a system restore. First save your device via iTunes. Also import your photos on your computer and copy all the important data. Reconstruction of the support first test and test. If this does not help, you may need to restore as a new and reconfigure from scratch as the backup may be damaged. It is important to have your photos and your saved data separately from the backup. Here are the steps for a restoration:

  https://support.Apple.com/en-us/HT201252

• updates to iOS app show filled in the App Store but not apps actually updates

  There's something strange happening very recently with the app on my iPhone and iPad updates. Two of them are on the latest version of iOS (9.3.2). Apps would show that they are updated in the App Store, but they are actually not updated. This is the second time that this has happened and I am writing this message I try to solve problems. The first time it happened I had to remove the app and reinstall it. I'm going...

  1. I opened the App Store.
  2. Press update of all.
  3. I saw the download of updates and the finish.
  4. Open the button is appeared next to the application in the list of updates.

  The problem:

  1. Applications will not open by typing open the button next to them.
  2. I went to the home screen and the applications in question are darker color.
  3. I typed on these applications and they changed the "Loading"... "which means that they have not actually completed the setting to.
  4. The apps started to download it again.
  5. Applications is is stuck in download.
  6. I turned both devices power off, then turn it back on.
  7. On my iPad: apps started to redownload and completed. Applications are now open.
  8. On my iPhone: applications made "Waiting."... "then"Loading"... "and have not finished downloading.

  I'll post this and continue to wait for applications to download. I don't want to remove them and reinstall because they are multiple applications I would you connect again and synchronizes again that I find annoying. I'll try to update this post after the completed download apps, if they end up actually or if I'll end up resettlement.

  I posted this at 09:00. It is now 16:45, and only one of the applications is completely downloaded. It is not a problem with the internet, because I can stream movies very well. Another application that has been "updated" this morning went dark. I typed it and it has been "Waiting."... "for 10 minutes now.

• IPad 3 no comparable with iOS 10. Then why the App Store keep sending updates?

  I understand that the iPAD 3 will not accept iOS 10. Why the APPLE APP STORE continue to try to push updates of my apps?

  App store updates are regardless of updates to iOS.  Even if you don't update to iOS 10, you will always get updates from app store.