Appellant not ringing before connecting edge

I used to live in a place with bad signals LTE so I stopped using the appellant advance. I recently moved so I was him giving a run once again. After turning on advance call back, I used to hear the ringtone before making a connection, now I have not. It is silent, until a connection is made. I rebooted my phone without success. Someone at - it experience with this problem or knows how to solve? I really don't want to make a transparent cache because they take 20 + minutes on my device. Variant of 64 GB. This will be my next step however.


Tags: Motorola Phones

Similar Questions

  • Samsung note3 does not ring when you receive a call

    The new version of Skype is bad. My operating system is 4.4.2 kit kat almost 100% of the time Miss l name because it does not ring. When I make a call and do it on the loudspeaker, it just for no reason rebascule on the speaker internal and if I'm on the blue tooth, it stops working on the blue tooth and I have to switch between the external speaker and back to the tooth of blues to hear it again which is very dangerous for driving. It also only connects to the blue tooth after 2 or 3 trys, entering my prius that this only happens with Skype if I use the t-mobile application that it works every time perfectly with everything l am reports that I have a Skype number and a number of t-mobile

    I have 2 samsung note 3 with the same software 4.4.2 kit kat, I have the latest version of Skype on 1 of the 3 note, and the other has the older version of Skype when a call comes in only one with older version rings.

    every now and then a new will work perhaps less than 1% of the time.

    There are many other people who have this problem. I wish that they would at least recognize that they have a problem!

  • Linksys wireless-G 2.4 GHz DELL Studio XPS laptop. Can do not seem to connect wirelessly.

    Linksys wireless-G 2.4 GHz DELL Studio XPS laptop can do not seem to connect.  has worked before.  Works with a lead wire.  Clues to operate wireless?

    Thank you.

    Hi R4M4,

    1. did you of recent changes on the computer?

    2. what happens when you try to connect wirelessly?

    3. What is the model number of the Linksys router?

    Check and make sure that all the wireless connection settings is correct on the computer.

    In the Windows wireless network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

    Wireless network card: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  • Why does my computer need a password to login? Was not necessary before.

    My monitor would not come after hitting the space bar. The PC was in mode 'sleep', so when I move the mouse or press a key on the monitor and the PC will wake. But not this time. I restarted my PC and a new (different, never seen before) opening page appeared. To the left was instruction click on my user name. To the right was a Director HP_. I clicked on that and open a password window. I've never set up a password, then I just hit enter. I was invited for a password again. Message 'Forgot your password?', retype your password.  I typed in admin, but that has not worked. I tried several passwords that I use for web access and the forums, etc. but I have not received the case at all. Several reboots, always the same new opening page and request a password. Before that, my PC would just open in my office, now I have this new blue sheet that need a password.

    Hi Trevor,

    Thanks for posting your query in Microsoft Community.

    The description of the problem, you are not able to connect to the computer. I'll be happy to help you in this case.

    I suggest you try the steps from the following link:

    How to connect to your Windows XP-based computer if you forget your password or if your password expires
    http://support.Microsoft.com/kb/321305

    How to turn on automatic logon in Windows XP
    http://support.Microsoft.com/kb/315231

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756

    I hope this helps! Let us know if you need help with Windows in the future. We will be happy to help.

  • not able to connect a printer shared in task force gives the access error is to deny cannot coonect

    not able to connect a printer shared in task force gives the access error is to deny cannot coonect

    Hello

    1. don't you make changes on the computer before this problem?
    2. What is the brand and model of the printer?
    3. What is the full and exact error message?
    4. have you set a password to the shared printer?

    Please answer these questions and provide us with more information. This could help us help you better.

    See the articles that may be useful.
    "Access denied" error message when you print to a network printer, or view the properties of the printer
    http://support.Microsoft.com/kb/307053
    Cannot use network printer if your password is not saved
    http://support.Microsoft.com/kb/312055

  • Im not able to connect to the internet?

    Im not able to connect to the internet and the message that reeds "the instruction at"0x00bb707c"referenced memory at 0x1ab4a07 memory could not writen

    Hello

    1. don't you make changes to your computer before the problem?

    I suggest that you follow these steps and check if the problem persists.

    Step 1:

    Test the issue in safe mode with network.

    Step 2:

    If it works fine in safe mode with network, turn on your computer in a clean boot State and check if the problem persists.

    Note: Don't forget to restart your computer as usual.

  • The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

    The operation of e/s specified on Device\Harddisk2\DR4 was not completed before the expiry of the time-out period

    I did no changes on my computer for functionality, commissioning due to above mentioned problem goes & long

    Hi KarlMaskery,

    1. When you receive the error message?

    2. you have any external hard drive connected to the computer?

    3. do you have security software installed on the computer?

    4 when was the last time it was working fine?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • Does not load before the Welcome screen

    I get to the sign in screen on vista and I put my password and sign in however it will not load past the loading screen.

    Hello

    What would you say if try you it in safe mode? It will allow you to open a session?

    To access safe mode, press F8 just after the screen logo POST or original system manufacturer and before Windows starts to load. This should give you a boot menu where you can select.

    If you are able to log on successfully in safe mode, you can start the troubleshooting steps described here:http://support.microsoft.com/kb/929135

    If you are not able to connect to any account in safe mode, including the default administrator, please post back with some information about how and when this problem started.

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

    Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

    Try a system restore to a Date before the problem began:

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    It is the instance of Vista installation.

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

    Adjust settings, manage user accounts.

    Try the Forum above to repost, if necessary.

    See you soon.

    Mick Murphy - Microsoft partner

  • I am not able to connect on my user profile.

    I am not able to connect to my user profile.  I'm the account administrator.  My password does not work or I can not recall.  I read a lot about other people having similar problems, and most of the advice given to them is not really easy to understand.  It seems that the person must jump through a bunch of hoops just to solve a problem that happens sporadically for no apparent reason a lot of people.  I had this problem before, except that all my accounts could not be consulted and spent a lot of money to get it repaired.  Now, four months later, cannot access my main account, and the other two accounts don't change anything because they are not the main account.  What can we do to prevent that from happening.  You should not have more than one account as your main account for just because you know you need to because you know it will happen again, no matter what you do?

    Hello

    Maybe this will help you:

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

    Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
    known to cause this problem.

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
    Profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
    This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
    two with the same password) use to test or difficulty of the other.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
    not that an Admin account that is not used except for testing and difficulty).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Not remote desktop connection to use saved credentials

    Even if I clicked on "Edit" and put in my credentials Windows 7 Remote Desktop connection not automatically uses it.
    The checkbox 'always ask for credentials' is NOT checked.
    When I connect to other Windows clients on the target computer even their saved credentials are used properly.
    Is this a bug of Windows 7 Desktop connection remote or I do something wrong?

    Hi Rawsome,

    Thanks for posting of ' Getting Ready for Windows 7»

    Here is an excerpt from a remote help desk and how to make the article can help see the process as it is activated.

    To connect to a remote computer that computer must be turned on, it must have a network connection, Remote Desktop must be enabled and you must have access to the network to the remote computer (this could be through the Internet), and you must have permission to connect. For permission to connect, you must be on the list of users.

    Have you tried to change the settings of the remote computer?

     
    1.

    Open Desktop connection remote by clicking Start , all programs, Accessoriesand then clicking Remote Desktop connection.

    2.

    Before connecting, click Options, and then make the changes you want in the display of local resources, programs, experienceand Advanced tabs.

    NoteTo save these settings for future connections, on the general tab, click Save.
    3.

    Click connect.

    Please let us know if this helps you or if assistance is needed.

    Debbie
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The remote device or resource does not accept the connection

    I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.

    Hello Kyle,.

    Your computer is connected to a domain network?

    If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

    Forums TechNet for Windows 7
    http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

    Otherwise, try to follow the following suggestions to solve the problem.

    "Internet Explorer cannot display the webpage" error

    Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

    Also refer to:

    The remote device or resource does not accept the connection

    I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

    Thank you

  • Z10 blackBerry screen rotation and lengthen the time of a call incoming rings before the call to voicemail

    I have the BB Z10 and sincerely want to learn how:

    (1) rotate a screen that turned into a rectangle but must have back on the horizontal screen - have tried the lock refresh and rotation - both without success

    (2) with incoming calls, I need to lengthen the time before that the appellant go to voicemail

    Thank you

    Hello DERC,.

    The rotation of the screen may depend on the application you are using, some applications only performed in specific, portrait orientation or landscape. Example: some games work in the landscape and the hub can automatically rotate between portrait and landscape.

    Regarding the amount of rings before answering machine, it is a service provider controlled setting, I suggest you contact your service provider for more information.

    I would like to know if you have any further questions.

    Thank you.

  • My local network is not sending data but receiving. I am not able to connect to internet

    My local network is not sending data but receiving. I am not able to connect to the internet. No problem on my side of the seller.

    conduct a search on the internet, nothing works

    Hi Kaushal,

    1. What is the accurate and complete error message you get?
    2. don't you make changes to the computer before the show?
    3. which antivirus is installed on the computer?

    I suggest you try the steps from the following link:

    Why can't I connect to the Internet?
    http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

    Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

  • Remote device does not accept the connection since W7 re - install.

    Since then reinstall it W7 Pro, I'm now no longer able to map a network drive on a NAS on the network. The NAS device is visible to all other domestic uses (Sonos, Internet TV, etc) and can be accessed via the front view in a web browser without any problem. I can PING the device and don't get a response, so no problems with the device itself (which was untouched before, during or after re-setup of W7).

    Just cannot map a network drive!

    Tried to disable the firewall etc, but still no luck. Also checked that all relevant services are running.

    Someone has ideas that more I can do to get my laptop to talk to it as a network drive?

    When I enter the ip address of the NAS and click 'Finish' to the card, I get the following dialogue:

    The remote device or resource does not accept the connection
    The device or resource to 192.168.x.xxx is not configured to accept connections on port 'file sharing and printers (SMB).

    any help would be greatly appreciated.
    Thanks in advance.

    Hi Stuart,

    The question you posted would be better suited to the TechNet community. See the link.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

    Hope this information helps.

Maybe you are looking for

  • cannot fine internal power supply form new sound card

    Just installed the asus xonar dx card in my slimline s5670t office. The problem I have is that I can't find the power supply 4 pin I need on the mobo. Can someone help me?

  • Messages - file transfer fail to all types of files (pdf, pages, jpeg, png,...).

    Since a few days now, I have been able to receive any type of files in Messages app. I tried a few things that I could find online (and in previous discussions of apple). Nothing has worked. The only time I am able to open a file is when I send it to

  • HP G7

    I need help please someone help me my laptop does not start. Normal and it says bootmgr is missing please help me find a solutions to my laptop please

  • How to remove an old email address of parameters pay Apple

    iPhone 6, settings, wallet and Apple pay, send two addresses are listed. One is an old email address of work as I have no idea how he got as I never enter data to work in my personal phone. I need to remove the old e-mail address of work of my settin

  • EliteBook 8540w: video driver NVIDIA 2013 Window7881

    Get messages from HP support program to download the update: video driver NVIDIA 2013 Window7881 I keep trying to download it and it holds in check the mount status. It no more bad? Y at - it something I need to check or?