Apple 4th Gen tv - "sleep" mode

Similar Questions

• apple 4th gen tv does not work

  I plugged in the 4th gen apple tv and the first screen comes up with the Chinese writing and a picture of the remote control. the remote pictogram shows swiping down. e-e distance responds to nothing. It looks like this in a Chinese menu but cannot read Chinese, and nothing happens. help please

  Sounds like the menu remote synchronization and the battery being dead in the remote control.  Try reloading the remote: load your Siri remote or Apple TV Remote - Apple Support

  Note that you use the provided cable and a USB charger, or a USB port.

  Note also you can try and use the remote control that plugged while and do not need to wait three hours to fully charge.

• apple 4th gen tv isn't the Jack audio otical?

  I want to connect my apple tv to my sound surround. I read somewhere that I can us a cable audio perspective, but I do not see this take on the apple tv as the older models have. What are my options?

  The ATV4 has no optical.  You can take the TV HDMI of ATV and if your TV has audio you can connect that to your audio system.  It depends of what links your other devices are available, but there are several ways to catch a mouse...

• AppleTV 4th GEN UI late after sleep when it is connected to bluetooth speakers. What?

  I have the same problem with more than a 4th gen, and it's a head scratcher. I use HDMI to a projector (which accepts audio) and then I connect bluetooth about 7 feet to a bluetooth or Bose Mini receiver.

  When the device wakes from sleep the UI is lag (including video). It is not a problem of bandwidth, because without an icon to the home screen, you can see the images drop.

  Disconnect and reconnect the speaker will address the latency time 9 out of 10, but are a real pain.

  Disconnect and reconnect the HDMI do nothing. The problem remains

  I run all day so I don't think it is a heat problem, but at the same time, have no idea why a bluetooth speaker would make UI lag. Anyone encountered this? I'm running the 9.2.1 firmware. I hoped it would be addressed with this update, but I'm a little irritated, that he was not.

  Are you sure that the bluetooth connection is always made when you start again the Apple TV and Apple TV is not just slow as it attempts to reconnect with the speaker.

• Suggestions to improve playback of music on Apple TV 4th Gen

  Finally using my 4th gen Apple TV to play my music via home sharing, but it is a step backwards compared to the 3rd generation.

  To do some improvements of the user interface. My suggestions

  (1) pull bar progression of track, essential now to pause the track to see how much time is left to play

  (2) increase the size of the work. It seems much smaller compared to the old work on 3rd generation

  (3) dark mode. The bright screen is hard on the eyes and comes with a darker version, esp when you listen to music in a room dark

  (4) an icon to represent when you play music in shuffle mode

  (5) maybe a track number indicator, I you are track 6 of 12 in the current album/playlist

  all others?

  All excellent suggestions.  It seems that the interface has been designed to be 'simple' by removing all the information form the display.  It should be an option to enable a more descriptive interface for those who want more than the names and cover art.

• 4th gen Apple TV cannot pair with iphone remote app

  Click on 'Add Apple TV' selected on TV, then was invited to enter the 4 numbers matching password shown on television. However the TV shows 4 blocks of gray rectangle instead of 4 digits.

  I also checked that the apple TV and iphone are on the last OS update. What gives? This app is supposed to work with 4th gen now.

  Yes, it works. This looks like some weird glitch. Using the new application ATV 4 remote control (black), or the older version, now called iTunes remotely? Try restarting the ATV using the settings > system > restart. Then try to pair it again.

• Apple TV 4th Gen won't play videos

  Apple TV won't play movies at home since I've updated for TV OS 10.0. Before the update has never had a problem streaming the content of my iMac on the Apple TV. I have no problems of dissemination of content on the internet.

  Equipment:

  Apple TV 4th Gen - TV OS 10.0

  Time Capsule from Apple c. 7.7.7

  iMac - OS X El Captain v. 10.11.6

  iTunes v. 12.5.1

  Restart all the facilities, I had the same problem yesterday

• Not able to install apple tv 4th gen as home hub

  Updated to iOS 10 yesterday. I was looking for installation up to the ATV 4th Gen as a home hub, but it is not allowing me. It works very well to set up the ipad pro as the hub, but not the ATV, which is running TVos 10, and Yes 2 verification step is on. Everyone knows about this problem? Apple is aware?

  Hello. Have you seen this cannot create Apple TV (4th gen) as Home Hub?

• Unable to set up Apple TV (4th gen) as Home Hub

  I updated my iPhone to iOS 10 5s yesterday and today I updated my Apple TV (4th gen) to tvOS 10.

  But I can't configure my Apple TV as a hub in the home on my iPhone app - the Automation tab in the hub said "Make Apple TV (4th generation) to the center of your House...» ", but offers no possibility to do so.

  I found this article:

  Automate and remotely to your accessories HomeKit - Apple Support

  Who says:

  • On your Apple TV, go to settings > accounts > iCloud and make sure your Apple TV shows connected HomeKit.

  But there's nothing HomeKit this page of settings on Apple TV. (Yes, my Apple ID has two-factor auth enabled.)

  Does anyone have this working? Any tips?

  Thank you

  Martin

  Same question here, but with 6 s iPhone more and iPad 9.7 Pro.

  No "HomeKit" option under iCloud as instructions indicate there should be.

  Only reference HomeKit that I could find anywhere was under "Privacy", with the only option being "Reset configuration" or something like that. Who comes to HomeKit forget all my devices.

  Have activated two-factor authentication, then out of the iCloud, Apple TV, and back in. No luck. Tried to reboot several times, still nothing.

  The Apple TV is clear my HomeKit Setup, because the use of the thing "Reset configuration" has had an impact on what I see on my iPhone. So I think this could be a bug in 10 TVOS. Very annoying that it breaks the new Automation features in iOS 10.

• Apple TV (4th Gen) and HomeHub

  Literature of Apple is a little sparse on the practice of setting up Apple TV (4th Gen) as a Homehub.  They say

  • On Apple TV (4th generation): implement authentication two factor for your Apple ID. Then go to settings > iCloud and check that you are connected under HomeKit.

  That's all.  Thing is there is no settings > iCloud and check if your connected.  Is there a home App for Apple TV?  I'm missing something here.

  "

  Too bad, that it worked.  You must go to your iCloud account and HomeKit appears. It should be activate 2FA then in the AppleTV go to settings > iCloud > your iCloud and home account is displayed.

• Can't play music bought on the cloud on Apple TV (4th gen)

  I just started to use the Apple's music, and when I go to my music on my MacBook Air and iPhone/iPad, I can play anything I added whether through Apple music, music purchased from the iTunes Store or my own music that corresponded via iCloud music library.

  On my Apple TV (4th gen), however, I can't play the purchased songs. Apple and my own songs music songs play fine. But if I choose one of the purchased albums, the screen does is display the album artwork for every song Flash by very quickly, but does not play anything.

  Someone knows how to fix this or if this is a known bug?

  Thank you!

  You can try to reboot the device, and then disconnect the store and insert it again.

  TT2

• Help with Apple TV (4th gen) ADCOM receiver.

  I'm trying to connect my Apple TV (4th Gen) to my receiver with basic cable AV (sound). I have an Apple TV to TV HDMI. The audio input of the TV, I have the AV cable connected to my output of receivers. I can't understand why the sound is still coming from the television and not sound surround. Thanks for any help!

  Note:

  My TV is a Sony kdf-e42a10

  My receiver is an ADCOM GTP-600

  It's a little tricky because of the age of your components.

  You should connect the plug the ATV HDMI to TV. You then connect the stereo audio output TV at the input of the receiver. (Your description reversed entry and exit.) You must then turn off the TV speakers in the TV configuration menu and select the right input on the receiver. You get digital surround sound with this Setup, but you could get Logic Pro.

• How can I connect the Apple TV to my iPhone 4th Gen 6 over a Hotspot?

  I have the 4th Gen and iPhone APPLETV 6 Plus and when I turn on my iPhone "iPhone" hotspot, the Apple TV does not see in WIFI networks available and I do not understand why this is.

  I'm not either, my Apple TV can see my iPhone hotspot. Other devices see your hotspot in the same neighborhood.

• Apple TV remote turns on randomly 4th Gen Apple TV

  Hi guys,.

  I have a 4th gen Apple TV for Christmas at work. It's pretty convenient, but it's a very weird thing: the remote control sends signals randomly when nobody is in contact with it, in fact, nobody is there, everyone is metres from the remote control. Since Apple TV is connected to my TV which is capable of HDMI-CEC, it also turns on the TV. Sometimes without any model, when we sit in the corner opposite of the same room, or at random times of the day or even at night. Sometimes I go out in the middle of the night to check on our little girl and I see that the TV is on. Apple TV will switch to standby after a certain time, but since it does not send SIGNAL to the TV via CEC, the TV stays on. Sometimes I stop the movie I'm watching something and when I come back, film runs and minutes. This causes me a real headache, not to mention that it also adds the power bills, especially when we leave for a weekend and I come home that the TV is on...

  Did any of you ever heard, or it's a faulty remote with a contact problem around the buttons that need to be replaced? If the first case, how can I fix this, if the latter, will change any Apple retailer for me? There is no Apple store dedicated to Christchurch, New Zealand. My employer has ordered hundreds of Apple TV Online.

  Thank you

  Laz

  I don't have to assume that someone else uses one of the old silver remotes close to Apple TV or if someone could play a joke on you with a distance more or the Apple remote on their phone app.

  There was a small number of reports related to the buttons on the remote apparently stick and sending several times the same command, but I don't think I've seen all the reports to work intermittently on his own.

  I've seen reports where network activity has awoken from previous models, but never where this kind of activity began a movie plays when he suspended.

  I think that a good start in the resolution of what is going on here is to know if these red orders arrive via bluetooth, IR, or wifi, you could start by covering the unit to the rule (or in) re.

• 4th gen Apple tv doesn't remember connection

  I bought a 4th gen Apple tv to replace my 2nd generation it about 3 months ago. My girlfriend and I have a id iTunes and one account and both are set up on the new Apple TV. On the older, we could switch between his ID and mine, based on content, we wanted to see (each of buy us our TV shows or movies). With the 4th gen ATV, it requires the password whenever we change my account to hers, and vice versa. How can I configure the ATV to remember (not required) our passwords each time we have ID?

  Maybe it's not possible, see https://help.apple.com/appletv/#/atvb0753b37d. Family sharing might work, but their 'parent' allows you to pay for everything.