Apple cannot replace the housing/casing of my iPhone?

I have a 6 s iPhone, and have a mobile phone plan that allows me to level to halfway through my 24-month plan, also for a long time my camera has extremely minimal Exteriors/Interiors damage. And currently I have scratches and bumps on the housing/casing of my phone and I was wondering if Apple can replace the casing/housing and how much it would cost?

Advertisement

Apple does not replace the metal casing of the phone. If the phone is damaged and does not, they will allow to make a release of purchase of the warranty, as damage to the housing would be damage user, not covered by the warranty. However, if the device is functioning correctly, Apple generally will not allow an out of warranty replacement for purely aesthetic problems.

Tags: iPhone

Similar Questions

  • I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TV says wrong user

    I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TVsaybadusername password or.

    Your ATV1 has an old software system not updated for years.  You have 2 factor (6 digits) or authorization of step 2 (4 digits) enabled for your Apple account.  Here are the characteristics of the latter.  I disable these on your Apple account and try again.

    For Apple ID - Apple Support two-factor authentication

    Frequently asked questions about the audit in two steps for Apple ID - Apple Support

  • EM12c: Cannot find the House discovered for plugin id:oracle.sysman.db

    Platform EM12c:
    Oracle Enterprise Linux 6.2 (x86_64)
    Oracle Enterprise Database 11.2.0.3 (x86_64)
    Enterprise Manager Cloud control Release 1 (12.1.0.1) 12 c (x86_64)
    --------------------------------------------------------------------------------------
    Problem:
    EM12c > objectives > databases > add
    Discovery of targets on the host: mcsdbora1.esri.com
    mcsdbora1. ESRI.com - cannot find the House discovered for plugin id:oracle.sysman.db
    --------------------------------------------------------------------------------------
    Notes:
    -Mcsdbora1.esri.com host is "Microsoft Windows x 64 (64-bit)"
    -EM12c is on Oracle Linux 6.2 (X86_64)
    -J' downloaded the latest version of the software Agent before adding the host
    "" EM12c > Setup > extensibility > Auto Update "before adding the host" "
    -Mcsdbora1.esri.com host is listed under "EM12c > objectives > Hosts".

    I found these articles in the support.oracle.com

    "How to manually add targets to the database in 12 c Cloud Control [ID 1371846.1]"

    "How to deploy the latest Plugin from database to the WHO and the Agent in 12 c Cloud Control [ID 1388143.1]"

    This last article, says updated the plug-in "Oracle Database". I checked and I do turn more later 12.1.0.1 connect.

    I wonder if I can only solve this bug, if I upgraded to Bundle 1 Patch (12.1.0.2) and install the 'Oracle' plug-in 12.1.0.2 database?

    Thank you

    Marcelo
    --------------------------------------------------------------------------------------

    BP1 is required for the management of the goals of Windows. So, you need to first upgrade your Linux WHO to BP1 and apply a few spots on the top before you can deploy plug-in on Windows machines. Support can provide you with the details.

  • A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

    A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

    My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

    I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

    Four Messages are appearing: the first is on the top.

    Other messages are:

    2. ' cloudd wants to use the kenchain 'local products '. '

    appearing on the screen and ask for Keychain password password.

    3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

    4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

    It of an upheaval and please suggest how to solve this problem

    Hello remy!

    I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

    If your Mac keeps asking for the password in the keychain

    Thank you for using communities of Apple Support.

    See you soon!

  • cannot replace the print cartridges CP1025nw

    I am trying to replace the print on my HP LaserJet CP1025nw cartridges.  I did several times.  But this time, I can not cartridges suitable for turning in place.  I press any button to specify which cartridge I want to replace, only yellow appears!  I tried switching the printer on and out on, and that did not help.  I really need to replace black, but cannot figure out how.  Any ideas?

    Hi @annie89 ,

    I see that you have problems with the carousel doesn't turn only not to be able to change the black toner. I would like to help you today.

    Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

    You can manually move the carousel, by releasing the locking mechanism. Use something to push it.  Manually, back off the carousel, do not touch the toner however. I have also provided a picture where there are in fact two areas to leave, they are circled in red. The left side is easier to move.

    Cannot remove the ink cartridges.

    If the problem persists, I would like to do a hard reset.
    Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
    This ensures that the printer is full on and can help this situation.

    If you need help, let me know.

    Have a great day!
    Thank you.

  • Cannot replace the authui.dll in the system32 folder

    Yes I know I'm not supposed to do that, but I want to change the Vista login screen.  I copied and edited the original authui.dll, but when I try to ' move and replace "/" copy and replace "it in the system32 folder, nothing happens - screen flashes as if the file has been moved, but when I check, there is no authui.dll in the system32 folder.  I opened the file in Reshacker and has replaced the original authui.dll file with my changes successfully but the result is the same in both cases: Vista does not accept an edited version of authui.dll and the login screen remains black with only a slider and I'm forced to use sytem restore to restart vista.

    Why authui cannot be changed?  I don't understand!? I know that imageres.dll and basebrd.dll can be changed, why not authui.dll?

    I have vista 32 sp0 Home premium and I took possession of the file.

    It seems that this person was able to do it if its not impossible:

    http://www.AeroXP.org/Board/index.php?showtopic=7545

    Hello

    Check this link and no need to change anything:
    http://www.Vistax64.com/tutorials/79886-logon-screen-change.html

    All the best!

  • Balance of Apple - cannot activate the debit card

    System performance decreases after a few months of use.

    That nothing worked, I had to 'Reset settings' to improve performance.

    After that, I tried to add my Apple debit card pay Wallet (one I added when I bought the phone and used very well until the Reset Settings procedure) and the card will not activate.

    Even after contacting the Bank and confirming that the card is active and ready to be used with Apple pay, even after deletion and add new card, reset the phone, contacting the Bank and which confirms once again that nothing works, the card is stuck in "Activation" even if up to the reset It worked fine.

    I use Apple pay almost everyday, and I miss not having him so... help!

    Hello

    It may help to follow the following steps on your iPhone:

    • Go to: settings > iCloud - at the bottom of the screen, disconnect.
    • Go to: settings > Touch ID & password - password turn off.
    • Restart your iPhone.
    • Reconnect to iCloud, turn on password and try to add your card again.

    When adding the card, follow the steps detailed here:

    Set up Apple pay on your iPhone, iPad, or Apple Watch - Apple Support

  • Table 3D: cannot replace the 2D subset?

    Hey guys,.

    I discovered a rather strange event (if any). In debugging my code, I stumbled upon my function replace table subset to find that it was the source of my frustration. Either I don't understand how it works for 3D arrays (I use it a lot for 2D, 1 d) or there is a bug. I have attached a picture of the code examples here. I can't replace a 2D picture into my table 3D. I would like to take a page from the 3D and replace it with a page of update / different. The example image is sure to strongly the oddity.

    Any thoughts?

    Regardless of the size of the input array, the result of the table replace never increase the number of items.  You try to grasp the first page, add a line, then replace the first page.  The result is that the replacement is cropped to the initial first page size, if you have a developed NOP (no operation).  Move the entries in your table to build on it and see what happens.

    You can't replace an item that does not exist in the input array.

  • Cannot replace the PXI embedded clock with clock oscillator PXI-6682 on PXI back plane

    I installed a module of synchronization PXI-6682 to slot 2 of a PXI-1031chassis with a PXI-8110 controller running hypervisor and RT.  The 6682 is installed on the RT system hypervisor for GPS sync during the measurements, but I would like to ask the TCXO on the PXI-1031 chassis backplane (which replaces the PXI embedded clock).  When I try to run the "Clock.vi route" that I found in the finder of the example, all I get are error messages indicating that a parameter for this operation is not valid.  The Terminal source is "Oscillator" and terminal of destination is "PXI-Clk10_In"  How can I determine which parameter is not valid?  Any suggestions?  Thank you

    Hi vugt.

    You are right that the physical switch determines which one to use and you should not have to route signals.  If you are having problems with clocks after the synchronization module 6682 please let us know!

  • HP envy 100 D410a cannot replace the paper path door in the printer!

    Has received a 'false' paper jam message and followed the instructions to remove door paper to address 'paper jam' path (it wasn't any paper stuck).  Now, it is impossible to replace the paper path door.  Help!  Thanks, Brooklynllp

    This door can be difficult to get back up sometimes. The video below will show you how to replace the door on. Hope that helps.

    http://goo.GL/40uv3

  • Apple will replace the battery for my MacBook Pro to the retina when in-store?

    Hi, the battery must be replaced on my MacBook Pro of retina, but I don't want to send it and pick up within 2 weeks. They will replace when I'm in the store? The guarantee also ended 2 weeks ago that I'd be able to show them, and they would be understanding and do it for free? Personally, I think that £125 for a battery is charges and it's a shame that it's over 2 weeks ago. Thank you!

    well - it depends on the discrection of one you get. I'd be inclined to say "no, they can't do it for free. As for how long that will take, well. again, you will need to enter and take a go-genius bar. What I can say is to be nice and polite, and maybe you could get lucky

    JB

  • Music using Apple without replacing the iTunes library

    I have a carefully organized iTunes library consisting of more than 2000 CDs ripped in high quality AIFF 16/44 and more than 1000 LPs ripped in high quality AIFF 24 / 96.  I corrected mistakes in album art and metadata over the last decade in the construction of this library.

    I am interested in the plan on the part of Apple music family.  We have 3 AppleTV that I would be able to use the service on 3 iPhones and 3 iPads.

    What should I do to make sure that I don't experience that some have, there where Apple music begins to overwrite all files and associated data in my current iTunes library folder with files of quality lower and data from Apple's music?

    I don't think he could emphasize enough that you need to secure a complete backup of your existing music and the iTunes library files that you have obviously invested a lot of time in. Only then would consider allowing music to Apple.

  • Cannot replace the colors in the document (background and text)

    I have many documents to read, but the glaring white background of PDF files really hurts my eyes and I end up getting migraines.

    I changed the colors 'document' [Edit > Preferences > accessibility > Document Color Options > replace Document colors > custom color: Page Background gray =;] Text = Black]

    Adobe Reader.JPG

    I have the "Replace Document colors" checked, and I chose Custom colors (gray, black background text).  However, this does not change the background color and text of most PDF files.  Even if everything is checked, when I press OK, the document remains black on white text.

    Help, please...  Thank you!

    However, this does not change the background color and text of most PDF files

    This does not change the color of scanned documents.

  • Y460P: Cannot replace the delete key

    I removed the delete key, because it was not pressing down correctly. After cleaning the surface under the key, I tried to return the laptop key like what I did with the other keys... Place it in the slot and press downwards.

    However for some reason that the key doesn't cut in place... the left side of the key hangs in the position, but the right side do not hang anything.

    Pics:

    http://i.imgur.com/90bWY.jpg

    http://i.imgur.com/MsjLa.jpg

    http://i.imgur.com/lvik7.jpg

    Hey Question,

    hope this will be your answer...

    http://www.laptopkey.com/index.php

    Zehn

  • Recently, I bought a new laptop with Windows Vita installed on it. Windows 7 cannot replace the Windows Vista on my laptop? In addition, it would be a better option for me?

    Install the new Windows 7.

    This is the Forum for Windows Update.

    Read the info below and for other Windows 7 repost in the Windows 7 Forums; the link below:

    How does the Windows 7 upgrade Option?

    The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time of upgrade Option.

    http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

    Above Microsoft link has info for the Options to upgrade Windows 7 from participating computer manufacturers.

    Read the info here to see if you qualify and how to order.

    http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

    FAQ about the upgrade is at the link above.

    http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

    Windows 7 Upgrade Advisor.

    http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

    Railways upgrade to Windows 7 at the link above.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    Windows 7 Hardware/Software Compatibility Center.

    For any other question of Windows 7:

    http://social.answers.Microsoft.com/forums/en-us/category/Windows7

    Link above is Windows 7 forum for questions on windows 7.

    Windows 7 questions should be directed to the it.

    You are in the Vista Forums.

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for


HashFlare