Apple Configurator 2 & Blueprint applied to the 1 ipad on cart

Similar Questions

• Apple Configurator 2: load a Gmail account on iPad

  Someone responsible of what an single Gmail account on iPad several Air using Apple Configurator 2?  Not another Gmail account for each iPad, all the same Gmail account over and over again on every iPad.

  I understand, there might be other ways of skinning this cat and you have concerns I want to load the same Gmail account on a whole bunch of iPads, however I need to do and believe me when I say that short to manually enter the account information for each iPad (which I do not... 170 iPads and counting), the only tool I have and it can have for this is Apple Configurator 2 with a useful load of Mail in a profile.

  I tried all the settings and combination of settings that I can see on my profile MAIL payload section.  Here are the Gmail settings that I use:

  Incoming mail: imap.gmail.com, Port 993

  Outgoing mail: smtp.gmail.com, Port 465 (and tried with and without SSL 25)

  When I install the profile and then click on the MAIL icon on the iPad, he thought for a second and then I get the following message:

  Do not Mail

  The user name or password [email protected] is incorrect

  I checked the user name and password several times and they are typed correctly.

  Any help would be appreciated!

  Hi David,

  I just changed one of my schools to Exchange Gmail. The exchange of useful load was easy, but I had to set up my ipad 'master' manually with Gmail settings for my 1 Gmail account and then create a backup which all my other iPads restore from when I update them at the beginning of the year. This example gets most of his work, but it does not keep the password when restoring the backup - so I have to open the email program and quickly grasp the Gmail password on all ipads before giving them back to the classes. Boring I know, but it takes a few seconds to do. In fact, I had to accept the "Trusted certificate" question on every iPad when I used Exchange is not very different.

  If you split the payload Gmail issue please let us know.

  Kind regards

  Tim C.

  Wellington

  NZ

• Update Apple Configurator 2 App

  Hi all

  I have a few questions related to Apple Configurator 2 which I hope you can answer.

  In the first Apple Configurator, you can update apps in iTunes, and then add them in the Configurator of Apple, replacing the older version of the app. In Apple Configurator 2, this is not the case. Even if I downloaded the latest version of the app in iTunes (for example iMovie for example), Apple Configurator 2 redownloads always applications that need to be updated on a device. For example, I have 23 iPads all need 7 app updates. When I select all and press update, it recognizes 7 applications that need to put up-to-date and going to download the updates. Why Apple Configurator 2 does not recognize that there are already some updated versions of the applications on the computer, or allow me to 'say' Apple Configurator 2 updated applications exist?

  Moreover, I met an error during the "transfer area" some applications so I decided to update a single iPad as a test. It worked. But when I'll update another iPad, you must re-download the updates again, even if she JUST downloaded the exact same app for the iPad last update. Then why Apple Configurator is a temporary storage for applications previously updated? If I update iMovie on iPad #1 and then update iMovie on iPad #2, please redownload the update for each iPad. If, for any reason, you need to update the iPads, one at a time, it will really really take a lot of time to download the same updates over and over again. Does not appear very effective.

  Any ideas?

  All iPads have the latest version of iOS 9, and the computer uses El Capitan 10.11.2

  (Like a slight upgrade, I think it may be faster to simply add the applications again, replacing older versions.) However, this will give you a prompt to replace the existing application. "She will do it for each application being replaced in this way.)

  Post edited by: Pmintz25

  See:

  https://www.Apple.com/support/osxserver/cachingservice/

  I think you can buy OS X server for about $20.

  R

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• Sharing won't apply to the Apple store? How fresh Spotify my sister by charging me by iCloud family shares?

  The sharing of family purchase don't apply to the Apple store? How fresh Spotify my sister by charging me by iCloud family shares? And without notification, or by e-mail.

  Say you that you be billed for the purchase of your sister? If it is then see the page that you have published since:

  After you set up your family, anytime a family member throws a new purchase, that it will be charged directly to your account, unless the family member has gift or store credit. First of all, their store credit will be used to pay the invoice total or partial. The rest will be billed to the card of the family of the Organizer. The family Organizer, the revenue generated by the transaction will be sent to you. Learn more about how are charged purchases made on iTunes Store.

• Apple Configurator 2: Installation of the application blocks / loops over the placeholder of transfer

  I tried to set up a cart with Apple Configurator 2. I'm in iOS 9.2, iPad 2 Air and El Capitan. I tried to put in place following the blue print instructions, but that, as a dismal failure as this resulted in 16 of the 20 iPads being brick. So I was their implementation of a group of 20, first install a profile and installing apps. I tried to install my apps, but which have resulted in a loop and the errors that have no definition massively. So now I install apps in small groups of 3-5 applications. The problem that I am running is sporadic looped / hung when I install some applications. There seems to be no rhyme or reason. When I try to install the application on its own, the problem persists. It hangs at step "installation of placeholder. So far, this has happened with: Garage Band, Photo Collage and Socrative Teacher Edition. To solve the problem, I have to 'remove' the partially installed apps and then renounce install the specific application. Even if I try to install the application on its own, the problem persists. Any suggestions on how to fix this? I'm banging my head against the wall here. I'm on hour 25 + (not counting the nights where I hit a button, go home and come back on a random error).

  Thank you!

  I'm having the same exact problems, described to a T, I also try to update / prepare several wagons and Config 2 has recently been the total scourge of my work. I love the interface and think I have a solid understanding of how to use the program, but the process never ends. I thought whole point of the program was to be able to add/remove/update / manage iPads massively, but it seems to be able to get everything that fact I can only work with 2-3 iPads, both. Even so, I also have problems with remains of place holders or partially installed or removed applications. Please let me know if there is anything I can do to allow this program to run more smoothly.

• Configurator 2: How to organize the icons

  Configurator Apple 1, I could deploy a predefined arrangement of the icons as well as applications and profiles of boards by creating a backup of an iPad which I set up as I want it and then restoring to several iPads. Apple 2 Configurator, I have not found a way to organize the icons on the iPad as I want. I can create a plan of action with which I can deploy apps and profiles, but I have not found a way to deploy a combination of predefined icons when I apply the action plan.

  You know an easy way to arrange the icons on several iPads as I wish?

  Read the last page or two of this discussion.

  Apple Configurator 2 and restoring of backups

• Cannot install iOS 10.0.1 with Apple Configurator 1.7.2

  Hello

  I have 60 iPads in 5 carts (12 per basket) that I need to install some applications on. They are already configured and supervised with Apple Configurator 1.7.2. I've never had problems in the past with AC1, I've always been able to install the updates and applications easily with very few questions, because of that I've never felt the need to update to AC2. However, this time during the update of ios and refreshment, I get the error 'complete with an error - cannot install iOS' 10.0.1 And now 12 of my iPads are stuck in recovery mode.

  I tried before wipe them off and re supervise them, but I always get the cannot install iOS 10.0.1 error, followed by all the iPads stuck in restore mode. I tried to update only 1 or 2 at a time. I tried the update/supervise them with no apps queued for installation. I tried to restore the iPad via iTunes, which works, but when I try to put it back on AC1, I still get the same error mode and recovery.

  I tried searching online for compatibility with the new iOS and AC 1 problems but found nothing.

  I would like to know if there is more information I should provide that might help.

  Thank you for your time.

  Ben

  Hi Ben

  Makes your iPad successfully update to IOS 10, we have approximately 400 ipads, I've updated a single ipad at 10 IOS using our MacBook pro AC1 OSX El Capitan to test, ill try another now and see if its success.

  When you connect an ipad update the Configurator re-download the IOS 10 or use a cached copy?

  How your Configurator is connected to the internet (behind Proxy, Wifi, Ethernet), perhaps the downloaded IPSW file is corrupted and need to be redownloaded removed\.

  Kind regards

  Rick

• Apple Configurator - ios 10 - applications are allowed with a composition problem

  Hello

  We use apple configurator to generate configuration profiles imported into MDM and install remotely to iphones.

  Suddenly, we have a strange problem with configuration and 10 of IOS. In the configuration, we use "Allow only certain applications" and with this settings, we cannot make outgoing call. Nothing happens... (nothing is happen hit the button risk, nothing will happen if select contact and select the phone number and click the call button). Receive works fine... If the configuration profile published and enable the allow all apps restriction, the call works again...

  No idea what has happened in the new IOS? There is a new application of system that we should include in the list of allowed applications?

  Concerning

  Hello

  We have exactly the same problem. We use Apple configurator to generate profiles and import to MDM.

  Suddenly once updated to iOS 10 and assistance to only allow applications in the section - whitelistedAppBundleIDs - we cannot make outgoing calls. Tapping the green button does not work.

  Any ideas what happened after updating to iOS 10?

  Same behavior with iOS 10.0.2 and in the whitelist BundleID com.apple.mobilephone

• I can't import a paid app in Apple Configurator.

  I can go for Volume purchase program and buy a paid app for our school.

  Then I can take.

  After I buy, the top line of the spreadsheet says that it was bought.

  However, I can't import into Apple Configurator.

  I see it in "Downloads" but it is always grayed out so I can't import.

  I'm logged into Mac OS 10.10 administratively for the permissions of the operating system is not the answer.

  A major problem for us.  Any help would be greatly appreciated.

  Hello

  Contact Apple directly > https://www.apple.com/support/mac/app-store/contact/

  Or on Twitter: @AppleSupport

• Restore iPad from Apple Configurator. Ask for credentials to connect?

  Most of he says title.  I'd just put up Server Manager so that we can manage the iPads at one of our client sites (we're a MSP file).  Given the "supervised: No. ' and started looking into it.  Apple Configurator downloaded 2.  Had some initial problems because find my iPad wasn't turned off, but eventually solve that.  Now he asks the iPad automatically configure credentials (name of site). I don't know what references here.  I tried the user accounts that are on the mac.  Nothing helps.  Any help?

  They must be accountable to the OS X server that runs on the Web site that you have listed as (name of site).  If your OS X server is bound to a server active directory, it will search for users.

• How to end supervision in Apple Configurator 2?

  Hello

  I am currently trying to find a workflow for the new Apple Configurator 2. My company distributes applications are for events, so I have to manage several iOS devices (rental iPads, MDM is not an option) via Apple Configurator. These devices must be supervised for the duration of the event, and then subsequently reset completely.

  Is there a way to put an end to the supervision of iOS devices without having to re - install the latest version of iOS? Whenever I have try to reset connected iPads that are supervised in the end to end supervision, Configurator 2 always completely re - install iOS on each device. Configurator 1.x enabled me to 'end supervision', iPads, and then back to zero simply themselves without having to re - install everything anything.

  Hello

  Select your device:

  Click action > advance > erase content and settings

  erase all (profile, monitoring, preparation etc...), but it will not reinstall IOS.

  Hopefully it'll help.

• How can I configure my wifi network to the big house?

  We are in a House floor (including basement) large 4 4500 square feet.

  Internet comes home in the basement.

  From there I push a switch that distributes internet cable throughout the House.

  Everyone has now 15 years later, wireless devices.

  I have 5 Airport extreme, what is my best option to implement?

  I want to have the name of a network and a password.

  I would like to be able to move anywhere in the House and have internet without needing to connect to different networks.

  Any help would be greatly appreciated!

  It is the standard of roaming network.

  Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)-Apple Support

  Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...

  Apple does not seem to have a newer version... in order to take the principles that are simple.

  Æ all have a simple base station name... I recommend names that are short without space and pure alphanumeric for everything... not to use apple recommended names in the utility.

  If you have AE1 - AE5.

  All units to create a wireless network... (More.. important to create not extend).

  for example AEwifi

  All units are configured with WPA2 Personal security and use same pure alphanumeric past 8 to 20 characters.

  All devices are set to fill mode, except maybe the main unit being used as DHCP and NAT router.

  Plug in ethernet in the appropriate floor and location.

  You now have a roaming network... It works great to move home with laptops... It may work less well with phones and ipads... It's Apple's fault for not allowing the device swap "tours" like on the side of the 3 G... You may need to turn on/off the wireless. I hope that one of these days the problem will be corrected.

• How do I change ID apple in itunes to coincide with the regular apple ID

  I have an iphone 5 s. ID in my itunes apple is different from that in my regular account, but I can't figure out how to change the itunes to coincide.

  Hi roryfromseattle,

  Thank you for using communities Support from Apple!

  I understand that you are connected to an Apple ID in iTunes on your computer, but need to disconnect and connect the correct ID of Apple. To perform this task, please use the information provided in the following article.

  Sign in or out of the iTunes Store

  After you have configured an Apple ID, you can connect to the iTunes Store to buy music and videos, view or edit your account information and view the history of your purchases.

  When you are finished using the store, you can log out to prevent anyone else who has access to your computer to make purchases using your account.

  Do one of the following:

  • Choose Store > sign in you (or disconnection).

  • Click login in the top right of the iTunes window (or click on your name and choose disconnect).

    

  Manage your account-iTunes Store - iTunes help

  If I misunderstood and that you really need to change the Apple ID on your iPhone, the next article will explain this process.

  Open one session with another Apple ID on your iPhone, iPad or iPod touch - Apple Support

  Best!

• is daq bit resolution applied to the area defined in the daq assistant or well to the limits of physical blood of the daq hardware.

  Hello, this is my first post here,

  I've been wondering about this:

  When you configure a new daq with the daq Assistant, is the resolution applied to the voltage / number of entries you define, or is it a fixed value per volt by channel.

  For example:

  I have a 6015 usb data acquisition, it has 16 inputs analog, 16-bit resolution 250 kech. / s 09:50 volts.

  so is this as (2 ^ 16) / (16 * (-10-10)) = my resolution through volt?

  or that this has nothing to do with the amount of channels,

  If I want to measure more than 0 to 5 volts, my 16-bit apply from 0 to 5, or even more scale of data acquisition (which is 09:50 volts)

  Thank you

  Marco

  You will get full-resolution 16 bits on each channel regardless of the number of channels is configured.  Renault most are multi-plexed if your specification of sampling RATE in usually a global significance that you can only scan channels with a sampling frequency = MAX RATE / number of CHANNELS.  Also, most NI Renault have a Programmable Gain amplifier on the front-end server, so if you specify a range of voltage smaller in your task configuration the amplifier will automatically increase the gain to use most of the possible BIT ADC.  You see care device and for more details...