Apple does not correct dangerous problem?

Similar Questions

• problems with some Web pages won't load does not correctly

  I have had problems with pages loading correctly but have not been able to solve the problems. I also tried to create a screen shot without success apparently. It is with all Web sites are not only some here and there. Sometimes if I navigate to the power and return to this page, he can solve the problems but more often than not, it does not solve the problem. I also use another browser such as google chrome or firefox and not met the same problem. The same page loads correctly and as expected. I appreciate your help in this matter and I did some of the steps in the frequently asked questions and what you all have suggested to solve the problem as clear the cache, etc. in case of problems, but it does not permanently fix

  my Firefox isn't properly loading page please solve... example

• New IMac does not, Apple does not change

  https://www.YouTube.com/watch?v=UdUY038FwCI

  I have this problem since I was the imac. I pointed out in 3 days. Apple does not change because I didn't buy that at its retailer. 3 months, still waiting.

  What should I do?

  Everyone pays even, but I get nothing (same lack offers as a freelancer). I think it's fair. What am I, I guess what to do?

  Run the Apple Hardware Test > Apple Hardware Test - Apple help

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• HP jet 7500 a desktop: office jet 7500 a print does not correctly

  Hello
  After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
  any ideas?

  Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• Why Apple does not allow an iPhone to do scan WiFi?

  About 4 years ago, Apple pulled all applications that have enabled an iPhone search for WiFi networks. Why? (There was something for developers who use "Private APIs").

  There are a number of tools available for analysis for Macs. I helped a café owner to untangle its WiFi (it had both an old, disconnected and a new active WiFi router, and had the same channels as the business side) and used my scanner for Mac to try to optimize my home network. But I still have a low coverage in some corners of the House. An iPhone would be a perfect device to determine interference and blind spots, because it is much more portable than my laptop. But Apple does not allow this use.

  Why Apple does not allow this very convenient using an iPhone? I just read about a hack that allows it to display the power of a cellular signal in detail. But you can't do it for WiFi. It makes no sense to me. Apple could do this job if she wanted to.

  Thanks for any thoughts.

  -Winston

  This forum is simply a user forum to help with technical problems. Apple does not control these tips, and no one will be able to answer the question for you. If you have a suggestions for Apple the right place to post this is http://www.apple.com/feedback/

• Satellite A200 does not correctly reduce or increase the volume

  Hello

  Our Satellite A200 is having problems with its Volume control wheel.
  If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
  He jumps rather the volume level in seemingly random directions (with a preference for the volume).
  Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

  BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

  -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
  -Which driver/firmware is attached to the order of the volume control?
  -How can I determine if this is a hardware or software problem?

  Advice would be welcome.

  Stephan

  Hello

  There is no software or hardware problem.
  It is a new generation of volume control.

  First of all there is no mechanical limit turning right or left.
  In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

  By the way;
  > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
  You can change the volume as in the sound settings that could be found in the control panel.
  > Which driver/firmware is attached to the order of the volume control?
  Audio driver controls the volume controller.
  > How can I determine if this is a hardware or software problem?
  There is no problem

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My computer does not correctly display web pages?

  On some web pages the boxes are stacked, for example on the MSN homepage ads pop up in the left corner of the screen on the top of the page instead of on the right side, and on the right hand side where they should be it's an empty box? Other pages display does not correctly? I don't know how to fix this or why it happened?

  Hi ChristineDupre,

  1. what browser do you use?

  2. don't you make changes on your computer before this problem?

  If you use Internet Explorer, you can follow these methods & check if it helps.

  
  Method 1

  You can follow this link and check if the problem persists.

  Some sites Web may not behave as expected in Internet Explorer

  
  Method 2

  If you have Internet explorer 9 installed, please follow this link.

  Web pages displayed incorrectly in Internet Explorer 9

  Hope the helps of information.
  Please post back and we do know.

• My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers. What should I do now?

  My floppy drive is not reading the disks. Device Manager does not detect any problems, I uninstalled and reinstalled the drivers.
  Convenience store said to click on properties Insert the diskette and
  Double click on open, but when I do that it stop computer
  and opens the recovery and ask for a correct diskette,

  Hello Tallm,

  Thank you for your message.  Did you get your floppy drivers of your installation diskettes?  If so, go to the website of the manufacturer of your computer and download/install the latest drivers.  Please let us know if this or help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• My ipod does not correctly install when I plugged in now mobile USB keeps freezing

  My ipod does not correctly install when I plugged it into USB. Since then, my laptop keeps freezing / crashing.  Start repair found the problem mentioned but could not fix it and just send an error report.

  I tried restoring the system and installed the updates of windows, but I still have the problem. I reinstalled itunes and my AV is up to date, I can't find a solution.

  Hello

  1. are you confronted this question all the time or only when using the IPOD?

  2. What is the brand and model of the computer?

  3 Please, try to connect the Ipod to different USB ports in the back and the front of the tower and check if you face the same problem.

  Please follow the links below to solve the problem.
   
  Method 1
   
  Start your computer in a clean boot and check for conflicts with third-party software.
   
  Start your computer in a clean boot.

  
  http://support.Microsoft.com/kb/929135
   
  Note: Please follow step 7 of the article mentioned below to start the computer normally, after completing the necessary troubleshooting.
   
  Method 2

  Step 1

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

  Step 2

  Install this update and check if the problem is resolved.

  Update for Windows Vista (KB925528)
  
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=620

  Also try to update the latest version of the drivers your controllers USB host, on the manufacturers site.

  I hope this helps.

• HP 8600: HP 8600 does not correct tray

  Hello. I'm having trouble with my HP 8600 is not pulling from the correct tray. This is a recent problem that everything was working properly until a few days ago. I have an accessory to two tray with tray #1 used for special dimensions (photos and envelopes) and standard #2 to 8.5X11paper tray.  I have the default to tray #2 and locked bin #1 in my settings (#1 on the top tray, tray # 2 down). However, when I send a print job for normal letter format, he tries to send the job to use the Tray #1. I can get around this by changing the trays, but it is a real pain and much slower. I checked all software and firmware is up to date. I hope someone has a solution for this problem.

  Hi @Desertboy,

  Thank you for joining the HP Forums!

  I have seen your post on how your printer HP Officejet pro 8600 does not correct status bar. I'm happy to help with this problem!

  Follow these steps to change the print settings by default for all printing from the desktop of Windows 8.

  1. Right click or touch and hold the bottom left of the screen to open the menu. In the menu, click or tap on the Control Panel, then click on or type printers and display devices.

  2. Right click or tap and hold the icon of the printer () for your printer, and then click or tap Print Preferences.

  3. Select your new default print settings, and then click or tap on OK.

  Source: change of print settings (Windows 8).

  I would use these settings to set the default to tray 2 for plain paper. So if you want to print to Tray 1, you can change the settings manually. Or, you can add the same printer again in the devices Panel and printers and together this is the default for Tray 1 for specialty paper and rename it to 8600 (Tray 1) as an example.

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope these settings help!