Apple ID will not let me update the apps

Similar Questions

• Why the application manager said that muse is updated, when it isn't? And will not let me update?

  Why the application manager said that muse is updated, when it isn't? And will not let me update?

  I have the latest version of OS X I opened Muse and he tells me that I have to update. I have check and that's only still v1.1, 960 to build.

  There is a promblem I don't know?

  Hello

  Sorry for the confusion and frustration.

  Because the Muse is an Air application, there are some limitations in the way that we interact with the Application Manager that can cause these types of States in conflict. We have plans that will address this, but unfortunately, it of a complicated situation and will take time.

  I'm working on a document that will address all the various installation questions such as this one and post it on the forum and elsewhere when its done. I apologize that this has not happened before and several people were affected than expected.

  See you soon,.

  Justin price

• Windows 7 sees my second monitor as "generic non - PnP" and will not let me set the correct resolution

  Hello

  I just installed Windows 7 Professional 64 bit on a new hard drive on my Dell Studio 540. The PC has a graphics card ATI Radeon HD 3450 and has a Samsung 226bw 22 "monitor on the digital output. This works very well, and has the resolution of 1650 x 4050. When I am running Vista (on the previous hard drive), I got a monitor flat 14 "old on the other out, and it worked fine (although at a lower resolution).

  I added a monitor AOC F22s + on the other output, expecting to be able to put this to the recommended 1920 x 1080 resolution. Unfortunately, Windows has developed the driver for this monitor "Generic non - PnP" and will not let me set the correct resolution. To the maximum it will allow is 1600 x 1200, (as well as all other resolutions it allows) do not use the monitor at maximum capacity, which is the ratio of evil anyway, so the display seems tense.

  I run Windows Update, so have the latest drivers. I tried to install the other drivers, but nothing helped.

  I tried to unplug the Samsung monitor and restart the PC, so that the AOC, one was the only monitor it and he always had as 'Generic non - PnP' with the wrong resolution.

  Someone at - it ideas? I'm at my wits end. AOC support did not understand and could only suggest that the monitor was faulty, but the place where I bought it insist that it works very well and so no Exchange or get a refund (no restocking fee, which is a RIP-OFF).

  I really want to use both screens and would appreciate greatly any help that anyone can give. I hope I gave enough information. If I didn't, please let me know.

  Thanks in advance,

  Alan

  PROBLEM SOLVED!

  It turned out that my VGA cable was wrong and that it was not send the right signal to the computer. The screen worked fine with a VGA monitor, but the PC has not said that the new monitor is a PnP I tried a different cable and it worked fine.

  Thanks again to all who have suggested things.

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• Satellite L850 - Win8.1 will not let me install the chipset drivers

  Hello

  After I've upgraded to pro 8.1 windows 64 bit 64-bit windows 8 (preinstalled), I thought that windows will not let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64-bit), but they stay with windows drivers installed for them.
  The Device Manager displays all installed and properly using. In addition, during the implementation was executed to install the chipset driver, he skipped most of them, to install a missing driver only (unfortunately have not kept any screen to show). I tried to install using the Device Manager (automatic search or manually navigating the computer files downloaded from the site), but it keeps saying that the drivers are up-to-date (drivers with the version from 2006, when later seen on the site are 2014). Any suggestion what to do?

  Model name: Satellite L850-1MK
  Version of the operating system: Microsoft Windows 8.1 Pro 6.3.9600
  CPU: Intel (r) Core i7-3630QM cpu @ 2.4 GHz
  GPU: AMD Radeon HD 7600M

  Hey... good news.
  Thanks for the comments.

• my windows media player will not let me update my imformation media

  my windows media player will not let me update my song information after a windows update

  Come and find that my pc was missing some updates

• I forgot to package ID, not able to update the app World! Help, please

  Hi guys,.

  As the title says, I forgot the package ID, and I'm not able to update the app World! whenever I submit a press release I get an error indicating that the package what ID does not match. Please suggest me what I can do? How to find the package id? Thank you very much. See you soon.

  Goto the BB forum and ask the question. BB has the ability for you to create a new token of dev and map it to the original. I had to do this recently. MShom was the one who did it for me.

• Hotmail will not let me delete the account

  My hotmail account is sending spam messages. I went on the account to delete it asked to cancel all subscriptions and billing. I clicked on the link and he asked me to go check if msn has subscriptions, I did nothing. It will not let me delete my account, but he always tells me that I have subscriptions. I need to delete this account as soon as POSSIBLE. Does anyone else have this problem?

  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/

• will not let me run the updates so I can't even install norton

  loaded the only windows service pack for xp one, I had. but now won't let me run the updates so I can't even install norton. He says I need service pack 2 at least, but can no longer update this do I?

  I could ask why you are not being updated at least SP3, but I guess that's another story.

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  Some third-party programs can make a change in functionality after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947309

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Windows XP Service Pack 3 - file to Image CD ISO-9660:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2FCDE6CE-B5FB-4488-8C50-FE22559D164E&displaylang=en

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

• Security code will not save to update the paymnet options

  Security code wil not save by updating payment options

  Update billing information will be through your itunes on the computer account or IOS device. If this does not work, then you can contact iTunes

• What can I do? Windows Update will not let me update 80070490 error

  I was not able to update windows since February... and everytime I try it tells me error 80070490, but I have no idea what it is? all solutions?

  Windows update 80070490

  Hi happyspecialk21,

  Thank you for using the Microsoft Windows Vista Forums.

  This problem may occur if there is corruption in component maintenance (EC) manifest.

  Follow the instructions in the link below to solve your problem.

  http://support.Microsoft.com/kb/958044

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• 'Internet security options' will not let me install the Sims 3

  I bought the Sims 3 today and when I put it in my computer to install it, a saying 'unable to open these files. Your internet security settings prevented one or more files being opened. »

  I tried to adjust the internet options security to lowest setting, but it did not help. What can I do else?

  Thank you

  If your using windows firewall... goto Control Panel > windows firewall > change settings > DESACT.

  If using your firewall software, then it depends on where the settings to disable the firewall.

  Once the game has installed switch back on the firewall, this should allow the firewall to accept the sims 3, if not you will need to go into the settings of exceptions and add sims 3 for her.

• Windows 8 will not let me move the AppData\Local folder to new drive

  All,

  I wanted to get my user account files from C drive which is a smaller SSD drive at most of my hard drive. I encountered several problems.

  A lot of trial and error, I was able to move each file of folder of the user account to an identical structure on my drive D (a "spinner"). Once I worked on all the kinks, everything worked without problems.

  However, I was unable to move the hidden AppData folder. I discovered there are three subfolders: roaming local and LocalLow. I was able to move LocalLow and roaming without problem. However, Local gave me problems.

  I discovered that the Local had some folders and files under it for which I have no permissions. Once I gained permissions for them, I thought I was on my way. The command to move the folder (using the Properties dialog box) has started working on the transition of 79 000 files. He moved all but 19 of them. He choked on all 12-15 files that have been opened and used by the system and the balance of the 19 had too long of a file name. So, I was disappointed.

  I then decided to create another administrator account and the sign of the current account and connect to the temporary administrator account that I had just created. I thought that I could then move the files because they would not be opened and used by the system. But, when I open the Properties dialog box, the LOCATION tab was gone, so I could not move the files.

  I need answers to two questions:

  • Why Microsoft would give the user a LOCATION tab with a NAVIGATION button, if it was impossible to move the AppData\Local folder?
  • Is there another way that a layman like me can change this setting? Can someone direct me to here? (Such as it is, 2 of the 3 AppData files are on drive D and 1 is always the SSD C drive.)

  Thank you.

  Matt

  OK, I fixed using a symbolic link. I moved my complete record of users. Here are the steps I used:

  • Create a folder on the "C" drive, called "this_is_c" and create a folder on the disk "D", called "this_is_d" - it is only for identification purposes in the later stages.
  • Boot from the Windows 8 Pro disc. (In other words, will not start hard drive.)
  • Do not choose 'Install now' - choose ' repair you computer.
  • Then choose troubleshooting
  • Choose Advanced Options
  • Then choose command line
  • The player that appears corresponds to the player 'X' - which is the recovery disk.
  • Type "C:" to switch to the 'C' drive
  • Type "Dir" and see if you see the folder "this_is_c".
  • If you do not, continue to change letters until you see this folder.
  • It worked that the 'C' drive during this "repair" was maybe the same as my 'C' drive when I boot normally.
  • Find the "D" drive through the same process - that is, try to find the folder "this_is_d".
  • It worked that the "D" drive during this "repair" was maybe the same as my "D" drive when I boot normally.
  • Type this command: xcopy/e/k/o/h/b c:\Users d:\Users see the next chip
  • First drive name must be the name of the drive as the "repair" attributed to your normal boot drive 'C '. The second disc should be burned as it would be during a normal boot. So, in my case, these conditions were the same. Note: use a capital 'U' for users instead of lowercase 'u' in users.
  • Type "D" when prompted.
  • Type the following command: rd /s c:\Users
  • Type this command: mklink /d c:\Users d:\Users
  • Type this command: exit
  • Continue to start.

  This will create a symbolic link that will redirect all actions to or from users on 'C' folder in the new folder users on "D". In regards to windows system knows, he is still sending the disk of 'C '. It is just redirected.

  This works perfectly for me. I installed apps and run programs without problem.

  It's a sort of understand. But it works for me.

  Matt

• Oulook Express 6 it has an error and will not let me delete the email

  Original title: OUTLOOK EXPRESS 6 WINDOWS XP

  There out wrong and won't let me delete the email.  He still receives new e-mail.

  no problem viewing or respond.

  Anyone know an easy solution?

  the error code:

  An unknown error has occurred. Account: name, Protocol: POP3, Port: 110, secure (SSL): no, error number: 0x800C0133

  Do as I have indicated above, but instead of moving most of the messages in your Inbox, all move them and delete the Inbox.dbx file as well.

  If you move all messages from the Inbox for a reason, do the above and then come back and move messages in the Inbox and then delete the Inbox.dbx with OE closed box.

• Virus will not let run me the system restore, and I can't understand how to run a system recovery because there is no return upwards for this computer. It's a basic vista.

  When the computer starts, it must choose to leave a program unknown to the system access everything else it shows is a black screen. When you click on allow, he pulls up a virus scanner that says he has all sorts of viruses, but the program is the virus itself, because this virus program is not really on the computer. When you try to run the system restore, it says that this option has been disabled by the administrator. Also, I can't find how to run a recovery of the system and start the computer to its original settings. Help, please. It's not my laptop which is having this problem, but my roommates computer. Thank you for your time, I've ran out of ideas and was seriously in need of a little help. I tried to repair the system running through prerssing F8 in the boot menu and has not worked. also try the system restore via the SafeMode command prompt does not work either.

  Download Malwarebytes' Anti-malware using another machine. Install it in the
  your roommate infected computer in safe mode and run. Accept all default settings.
  Don't forget to do a backup when offered. I hope you find and
  eliminate the infection.
   
  "crashbbandicoot" wrote in message
  News: 351ebb9b-60aa-47 d 2-9b 13 - e309f4ee035b...
  > When the computer starts, it must choose to leave a program unknown
  > access the system all that it shows is a black screen. When
  > you click on allow, he pulls up a virus scanner that says that there are all kinds of
  > but the virus program is the virus itself, because this virus program is
  > not really on the computer. When you try to run the system restore it says this
  > option has been disabled by the administrator. Also, I can't find how to
  > system recovery and boot the computer back to its original settings.
  > Please help. It's not my laptop that is having this problem, but my
  > computer of roommates. Thank you for your time, I'm out of ideas and
  > seriously needed a little help. I tried already running
  > repair system through prerssing F8 in the boot menu and has no
  > work. also try the system restore via the SafeMode command prompt has no
  > not work.
  >