Apple mobile usb driver disappear after sync iphone

Similar Questions

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed?

  Original title: I need a market to resolve the problem remove the instrument.

  How can I get my computer my external USB drive (portfolio) after that I repeatedly get the message that the device "can not be removed? I have closed all other programs and waited for varying amounts of time, and tried all of the fixes that have been proposed on this site. Nothing works. I don't want to turn off the computer whenever I have to remove the device.

  I can't know what "all patches" you've tried, but:

  Make sure that the system restore does not monitor the external drive.  SR does need to control the system drive and to the system drive, SR has only about 1 GB of space max.  Make a right click my computer and select properties then the System Restore tab to configure SR.

  Make sure that the Indexing Service is turned off (at least for the external drive).  To disable disk indexing completely, which will also speed up your computer a bit, see http://lifehacker.com/031440/turn-off-indexing-and-speed-up-windows-xp.  For the external drive, right-click on the drive icon in my computer, select properties and uncheck the indexing disc

  There are different workarounds short to shut down the computer, but you might want to try this third-party app first:
  http://safelyremove.com/index.html  Among other features:

  The device cannot be stopped now. Why? Never encountered the situation when Windows does not allow you to remove a device? Unlike Windows, USB remove will show you programs which prevent the device to be stopped and let you close these programs or just files that they opened on the device.

• CD drive disappears after insalling Service Pack 2

  Can someone help me? My cd drive disappeared after installation of Service Pack 2 of Vista I uninstalled it and it reappeared. Then I installed other updates of Vista and the same thing happens.  I insert a cd in the player it starts spining but it won't play at all. I even checked the computer option where it gives you the hard drive and the cd player are supposed to be.  The hard drive is displayed but the cd drive has disappear. I don't know what to hope there, someone could help me.

  Hello

  Please click on start > search and in the search box, type Device Manager.
  Select device under DVD ROM Manager, you see the device.
  Make a right click on it and uninstall the device.

  There is no specific driver for reader to CD\DVD to the Web site of the manufacturer for the dv2000 model.

  Please, do a right-click on the DVD ROM drives in Device Manager and select "Properties".
  Under "Properties", select the Details tab, you will find the DEV and FRI [DEVICE and VENDOR ID].
  Please give me that.
  I'll help you get the drivers for DVD ROM

  Kind regards
  Manasa KP.
   
  Please let us know if the problem is resolved.

• I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  I recently installed the trial version of Adobe CC a few programs on my old 'C' drive instead of my new drive "F". The old 'C' will drive disappeared after as I migrate and get the new 'F' drive at the speed. What should I do?

  Hi Dan, try to run the cleanup (helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html) tool to completely uninstall CC to your computer, and then reinstall the desktop app: creative.adobe.com/products/creative-cloud

• Download and install the sub for the Apple mobile device driver

  iTunes does not recognize my iPad when it's connected to the laptop.

  using Windows 10

  Device Manager

  USB Bus controllers

  not "Apple mobile device void driver" installed.

  How can I install this?

  Try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Universal Serial Bus Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  Or try the iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  TT2

• Partition on HARD drive disappeared after formatting using the product recovery disc

  My laptop came with a partitioned hard drive C and D drives.

  After formatting my hard drive using the recovery disk of the supplied product with my computer, I don't have any option to partition the HARD drive, only for the 1. 46 GB for some recommended backup, and the remainder became the C drive.
  D drive disappeared. Now, when I put the USB ant in my laptop, it reads as D drive.
  Can you please help, I need to have my hard drive partitioned into C and D drives, and flash memory can be any subsequent letter.

  Hello Richard

  Is it so complicated to tell us which model of laptop you have exactly?
  Anyway, when you use recovery Toshiba you cannot lose score. After using the recovery media, you'll have to factory settings and the structure of the HARD disk will be the same as on the first day.
  Something like that is definitely not possible.

  > I don't have no option to partition the HARD disk
  This option doesn't exist. On some older models of laptops, just an option to set up the first score ability there.
  After the first start, you can go to disk management and activate the second partition. All that s!

  Please tell me what model of laptop have you then I can tell you more about the partitions.

• Internal drive disappears after 15 minutes running ' G:/Users/SAM/Desktop refers to a location that is unavailable'... etc.

  Hey everybody,

  This is my first post here, and it's because of a terrible problem that I have where one of my internal drives disappear literally just from my computer after about 15 minutes of my computer.  If I restart the computer the drive will return, but then disappear just after 15 minutes of use.  If I remove the drive and connect it to an USB hard drive docking station, it will show well here.  It's just a 250 GB SATA drive.  The only thing I can think is that I use it to store all personal files that are usually stored on the system C:\ drive.  When I installed the OS a few years ago, I went through the steps to get my data off the drive system in the event of a crash.  I doubt that could be the cause of the problem because it has worked well for a long time like that?  I remember having to do weird things in the registry or something to get the users folder to point to another drive.

  The problem exists since probably almost a year now...  It got so fed up of this office that I just stopped using it and started using my macbook exclusively for about a year.  I'm starting to use this computer for backups because it can hold much more (and more numerous hard drives) that the macbook could dream to).

  Any help would be greatly appreciated.

  Thank you
  -Sam

  If it works in a dock and the dock is a dock motor, it is the motherboard, or a connector failed

  Although G: might suggest that you have several internal hard drives and if so, you can check if the power supply is charged.

  And no it's not a victory to issue.

• Realtek HD Audio driver disappears after installing an ATI Radeon graphics card

  My Realtek HD Audio driver disappears (the Vista "Sound Manager" and "Device Manager") and is replaced with an ATI HD Audio driver after you install an ATI Radeon 5450 graphics card.  I tried to uninstall the ATI Audio driver and re - install the Realtek Audio driver.  But, after reboot, Vista automatically re - installs the ATI Audio driver (and the Realtek Audio driver, which I have just reinstalled, is not where after the reboot).  I use a HP a6110n desktop running Windows Vista.

  This works!  I would never have suspected that the problem was a BIOS setting.  Thanks for the good advice!

• Photos from Lightroom Mobile disappear after sync

  I started a collection of more than 200 photos that I have imported and edited in Lightroom Mobile on iPad.  I then later opened Lightroom on OS X and allowed the photos to sync from a mobile phone on the desk.  Only 16 of the 200 original photographs came through.  I tried to get the synchronization to continue, but no other pictures would come through.  Then I went to look at the collection on my iPad and photos that were not synchronized on Lightroom desktop disappeared from the collection of the iPad.  It seems that for some reason, the Lightroom Office resumed the sync and only allowed for these 16 photos to be synced and removed the rest pictures which were not synchronized.  After that I contacted Adobe support, they decided that the synchronization mechanism work properly now, and since I never deleted all the pictures there have been a "glitch" synchronization and offered no further assistance.  No one knows what may have caused this or how those deleted photos can be recovered?

  OS X 10.11.5

  Lightroom 2015.6

  iOS 9.3.2

  Lightroom Mobile v. 2.4.0

  Could you please send me a log diagnosis LR Desktop - better as a private message with a downloadable dropbox link.

  You can trigger the newspaper through Desktop LR-Mobile with Lightroom > preferences, and when you hold down the ALT key, you will notice a diagnostic log button to generate. -Guido

• The mapped drives disappear after logoff or restart.

  I can not get a mapped drive to stay mapped after a logoff in Windows 7.  If I map the drive by right clicking post work or the command prompt (net use f: \\sharename / persistent: Yes), once the user disconnects or restarts, the players disappear.

  This occurs only for Windows 7 users.  We have no problem with users under XP.  Someone has an idea?  I tried to connect with different user names, disabling firewall of 3rd party client, disable UAC, etc..

  Hi CSholmire,

  Please let us know your concern.

  I suggest you the methods below. Try these and find the question after each method:

  Method 1:

  1. Open a command prompt as the user that readers are not remembered. Do not use the option "Run as Administrator". In this case, we are unwilling to do this. At the command prompt, type: net use
  2. Does say something like this: use C:\>net. New connections will not remember.
  3. If it is said that they "don't remember", then you need to change this. Type: use net p:yes

  That change the setting of the system for the user to perform the workouts be remembered all the time and the will is the default action.

  If the above is not the case, then map the drive through the command prompt and see if the mapping is known.

  NET use p:yes

  NET use r: \\servername\sharename

  You can change the drive letter a: above to any letter free as you like. However, remember that if you use a letter that is too close to the beginning of the alphabet you can overlap with the USB devices and then one or the other will be absent. You can replace the r: with * and it will start with the next free drive letter starting at the bottom of the alphabet. This should make the reader remember through log and restart.

  Method 2:

  The long-term solution is a registry editing that would get the mapped drives visible to standard and administrative sessions.

  1. Press Windows + R and type: regedit
  2. In Regedit, navigate to HKLM/SOFTWARE/Microsoft / / Windows //Current Version / / policies / / system.
  3. Create a new REG_DWORD entry named "EnableLinkedConnections".
  4. Set the value to 1.
  5. Restart after you add the registry entry and the programs will be able to see the drives mapped forever.

  Note: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  How to back up and restore the registry in Windows

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Getting the Apple (iBoot) USB driver

  During the last 6 months, I was on the phones and in stores to help me get Itunes working again.  He worked in September after spending 3 hours trying to resolve something this fix have either Apple or Microsoft.  So, I am desperately looking for help on how to DOWNLOAD AND INSTALL THE DRIVER FOR APPLE RECOVERY (iBOOT) USB so I can get Itunes working again. Please help step by step so I Don ' t mess up and I can print in case this happens again.  Also and try to help me not to ruin once again. Who's going to help me you're a life saver

  KAZ022

  Hello

  This problem is related exclusively to Apple components. I suggest that get you in contact with Apple support to:

  www.Apple.com/support/

• Apple Watch - contacts photos disappeared after 2.2.1 update

  I've updated my watch last week and have not had any problems until today only.  I noticed that my contacts pictures are gone and everything that is there now are the initials of contact.

  I checked my contacts and photos are still there on my phone.  Also, in the app shows that they are still there - but not on the watch.

  I rebooted twice, but that did nothing.  Also, when I receive a message from a contact who is now without a peak, it isn't even recognized as a contact because it only shows the number, they are texting, not their name.

  Not very happy!

  Hello

  The following steps may help:

  -On your iPhone, in the application of the watch, go: Watch My (tab) > general > reset > tap reset sync data.

  -Nothing seems to happen when you type, but the process will run in the background (invisible to you), allow a minute or two later.

  Therefore, it can also help to restart your iPhone and your watch later:

  -Turn the two devices off first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

• Yoga 2 Pro: driver disappeared after the system wireless backup

  After making a backup system the n7260 wireless intel has disappeared. I reinstalled it under the action of management device and the driver has installed as (2) and does not, which means that pilot 1 must be really there but not is not visible and also does not work. I cannot get internet connection or view available wireless networks. How to get this driver works again?

  
  

• local drive disappeared after restoring to factory running

  Hello! I tried to run the factory on my W510 recovery utility, and after getting a message which, not more than one copy of the recovery set can be created (which is true, I have already created a set earlier), one of my local records 'disappeared '. I still can't see my system disk (C, but I can't see or open my local drive (D.)) Anyone had this problem before? Thank you!

  Can assign you a drive letter of in disk management?