Apple Store is not up-to-day - network connection lost

Similar Questions

• Cannot connect to the local file and print when the domain controller is not available because the network connection

  Hi all
  Having problems for local users, connection to a file and print server in one of my satellite offices.
  When my t1 connection is disrupted (problem of local carrier) my users when the connection is down to connect to the file room and print and always have access to their files and the local printer.
  The domain controller is off site in my main office.
  Environment:
  All local desktop clients are windows machines 7.
  Printing and local file is a windows 2003 server.
  DC is window 2008
  Note that we recently changed all 2003 to all domain controllers the PDC 2008, suspect that it may cause the problem, but just cannot know where it track.
  Any help or thoughts would be appreciated.
  Thank you

  Hello trj'hwma,

  Thank you for the question!

  It's discouraging to know that have problems you with the local file and print. As I understand well you cannot connect to the local file and print when the domain controller is not available because the network connection.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  Windows 7 IT Pro category

  Answer to us if you have problems with the local files and print or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• "Network connectivity lost" alert - how to find which NIC is it?

  Hi, we cluster with VCenter 5.5 HA and 2 X ESXi servers.

  Each host has 4 NIC

  One of the host's alert 'Network connectivity lost' that was triggered 02:00 in the morning. Is to verify that NIC is this anyway?

  The events tab says know as NIC.

  Any help would be appreciated, thanks.

  You should see some sort of event in the user interface and the vmkernal.log and vobd.log.

  
  

  VMkernel.log

  ~ #vmkernel.log | grep "link down"

  2014-11 - T 05, 20: 17:20.770Z cpu0:33263) netsched: NetSchedMClkNotify:2329: vmnic1: link down notification

  ~ #vmkernel.log | grep 'link up'

  2014-11 - T 05, 20: 17:33.314Z cpu0:33265) netsched: NetSchedMClkNotify:2321: vmnic1: link notification

  2014-11 - T 05, 20: 17:33.656Z cpu1:33411) netsched: NetSchedMClkWatchdogSysWorld:3786: vmnic1: bind an event received, device operating at 1000 Mbps for the adjustment of the depth of queue to 8646 bytes with bytes 131 expected / us

  2014-11 - T 05, 20: 17:33.735Z cpu1:32808) netsched: NetSchedMClkNotify:2321: vmnic1: link notification

  2014-11 - T 05, 20: 17:33.736Z cpu0:36689) netsched: NetSchedMClkWatchdogSysWorld:3786: vmnic1: bind an event received, device operating at 1000 Mbps for the adjustment of the depth of queue to 8646 bytes with bytes 131 expected / us

  ~ #

  ~ #vmkernel.log | grep "NIC link is Down"

  2014-11 - T 05, 20: 21:25.915Z cpu0:33267)<6>e1000: vmnic5: e1000_watchdog_task: NIC link is

  ~ #vmkernel.log | grep "NIC link is Up"

  2014-11 - T 05, 20: 21:41.660Z cpu1:33268)<6>e1000: vmnic5: e1000_watchdog_task: NIC link is up 1000 Mbps Full Duplex, flow control: no

  vobd.log

  Just did a test for you.

  ~ # tailvobd.log

  2014-11 - T 05, 20: 17:33.418Z: [netCorrelator] 620684191us: [vob.net.dvport.uplink.transition.up] Uplink: vmnic1 is in place. Affected dvPort: 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. 1 uplinks to the top

  2014-11 - T 05, 20: 17:33.418Z: [netCorrelator] 620684194us: [vob.net.dvport.uplink.transition.up] Uplink: vmnic1 is in place. Affected dvPort: 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. 1 uplinks to the top

  2014-11 - T 05, 20: 17:35.000Z: [netCorrelator] 622285373us: [esx.clear.net.dvport.connectivity.restored] network connectivity restored on DVPorts: ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. Vmnic1 physical NIC is in place

  2014-11 - T 05, 20: 17:35.000Z: [netCorrelator] 622285495us: [esx.clear.net.dvport.redundancy.restored] redundancy Uplink restored on DVPorts: ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad 8 6th b 95', ' 5/a6 eb 07 50 28 7 b c8 5 a - a0 a6 99 e8 ad b 8, 95 6. Vmnic1 physical NIC is in place

  2014-11 - T 05, 20: 21:26.094Z: [netCorrelator] 853350673us: [vob.net.vmnic.linkstate.down] vmnic linkstate down vmnic5

  2014-11 - T 05, 20: 21:27.001Z: [netCorrelator] 854286718us: [esx.problem.net.vmnic.linkstate.down] vmnic5 of the physical NIC linkstate is down

  2014-11 - T 05, 20: 21:42.149Z: [netCorrelator] 869405317us: [vob.net.vmnic.linkstate.up] vmnic linkstate upward vmnic5

  2014-11 - T 05, 20: 21:43.002Z: [netCorrelator] 870287321us: [esx.clear.net.vmnic.linkstate.up] vmnic5 of the physical NIC linkstate is in place

  2014-11 - T 05, 20: 24:38.723Z: [netCorrelator] 1045972218us: [vob.net.vmnic.linkstate.down] vmnic linkstate down vmnic5

  2014-11 - T 05, 20: 24:39.000Z: [netCorrelator] 1046284854us: [esx.problem.net.vmnic.linkstate.down] vmnic5 of the physical NIC linkstate is down

  2014-11 - T 05, 20: 24:42.230Z: [netCorrelator] 1049478491us: [vob.net.vmnic.linkstate.up] vmnic linkstate upward vmnic5

  2014-11 - T 05, 20: 24:43.001Z: [netCorrelator] 1050286523us: [esx.clear.net.vmnic.linkstate.up] vmnic5 of the physical NIC linkstate is in place

  * Reminder to implement Syslog.global.logHost (software) advanced creation collection newspaper and magazine.

• Apple Store does not not in Apple TV 4 gen

  I bought today 4gen Apple TV, everything works except the App Store after I have updated to the latest operating system, when I go to buy / download any app, I do a click in one of them to download and the application does not open. You can click with remote control, it moves but does not open. I do not see top charts, categories, purchased or search, when I go to these options does not show the lists, I have tried to restart, restore, unplug all the cables, reset my router, connect to another network, to another identifier Apple and nth seems to work.

  Anyone having the same problem?

  is the new operating system? Cause before I upgraded I normally use Apple Store. I'm in Finland btw

  I also have this problem... I'm based in Indonesia and I used my regular access to the Indonesian app store area apple ID... Then I tried to change my apple ID to US region, and it's so I have no problem at all with the US AppStore and I can access the apple store and download some applications in the region US apple store...

• Apple store links not working only not with Safari 9.1.

  I had this problem going on with Safari for some time. When I access the site from the Apple Store so that I have to disable javascript for links on a page to work and then go back to get the links on the next page to work. This seems to come and go from page to page, very frustrating. Firefox seems to work very well. Anyone have any ideas?

  Please disable all extensions Safari and test. If the problem is resolved, re - activate the extensions one or a few at a time until you find the culprit.

• Do not allow any wireless network connection

  Hello

  I am trying to set up my connection wireless but when I go to my control panel/network connections and right click and enable the wireless connection, it just goes back to activate. Do you know what I can do to activate it.

  Thank you very much

  Hi Paulm,

  can you please tell us which laptop computer and operating system you have as some laptops are only Wifi with antenna and not Mini PCI Wifi card.

  Also, you can check in Device Manager if your Wifi card is detected in a right way! If Yes, there is also an option to enable or disable the card.

  Please do not forget that the FN + F8 key combination also allows to enable/disable option.

  Tom

• M30: Could not find a Local network connection

  Hi all, I really hope that someone can help me!
  I had a M30 Windows Home, it comes with a built-in wireless G connection (that's fine).

  However whenever I try to access my network via an ethernet cable, I can't find my LAN connection under--> network connections Control Panel.

  I have installed the last drive for the LAN (lan-sm30-xp - 56068112003.zip) available on the support site.

  I'm still not able to detect my NIC or discovered my connection to the local network.

  Any ideas?

  Thank you very much
  G

  Hello

  I agree with chance. Try to create a new connection to the local network. In addition, you can also try to run the network troubleshooter utility.

  Good luck

  Good bye

• Wireless connections do not appear in the network connections

  Running XP Home Edition with Service Pack 3.  Setup new rounter wireless.  Went to the Panel of control/NetworkConnections.  The LAN network icon is there, but no icon of wireless networks.  Is on a MacBook Pro running XP in Parallels and there is no problem on Mac OS wireless connectivity, then of course, the material is very well and comes with XP.  I ran all the shooters of boredom and configuration wizards, still called dLink support (router manufacturer), and the technology had no idea what to do when the wireless icon is simply not in network connections.  Any help would be much appreciated.

  Hello

  Have you made changes on the computer before this problem?

  The following article might be useful:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702 (this item can also be used if you are using service pack 3)

• After reformatting XP, my computer does not display my Ethernet/network connection

  I reformatted and reinstalled XP, service pack 2.  Device Manager does not display a network, nor the fact reckognize my ethernet connection.  I have a Linksys router.  To install it, I have to be on the internet.  I can't be on the internet without an ethernet connection.  How can I fix it?

  Hello

  I feel when you go into Device Manager there is a yellow question mark. If you expand this section you may find an unknown device. This will be your network card. So basically, you need to know what brand and model of the network adapter is. Download the driver from the internet on another computer. Then install it on this one. The unknown device will then pass under the network connection in Device Manager.

  So basically, you will need to download your ethernet card driver.

  Free Support Tools

• "The dependency service or group could not start" - cannot open network connections to connect to the internet.

  Hello

  Ive recently managed to repair my Vista computer from a black desktop screen, by doing a Virus scan from kaspersky in safemode, thanks for the advice in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/a960276d-5147-4286-A437-711e96e25296/

  However, whenever I try to go to the network connections to connect to the internet, I get the error message saying "the dependency service or group could not start", so I can't update kaspersky for the last secuirity as well as not to use the internet. I tried the system restore, but there is no previous saved location for me to do. :(

  Any help would be greatly appeciated :)

  Thanks in advance

  Sam

  Medion M96350,

  Intel Core 2 Duo,

  T520 @1.5 - Ghz,

  Vista Home Premium

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why the control panel network connections window does not show my active network connections.

  There is nothing visible in the network connections window. I still have full internet access.

  Hi GarryKerluke,

  1. Did you the latest changes on the computer?
  2. What is the type of internet connection you use?
  3. You have security software installed on the computer?
  4. When was the last time it was working fine?

  See the Microsoft article below and check if it helps.

  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP

  http://support.Microsoft.com/kb/825826

• Satellite Pro U400 - network connection lost after suspend

  I have a Toshiba Dynadock. My network is connect directly in dynadock.

  When suspend my Satellite Pro U400 and after reboot to continue working I lost my network connection. Then I shut down my computer and disconnect/connect Dynadock I can continue working.

  What is the problem?
  Dynadock software version is 2.0

  Hello

  I see that you have switched from Vista to XP.

  First of all I recommend you update the BIOS.
  As I m not wrong on the European driver Toshiba page, you should find a newer version of the BIOS.

  You will need to upgrade Win XP to the last State.
  The XP must be up-to-date and all service packs, hotfixes and patches MS must be installed in your laptop.

  Access the Device Manager, and then score in each USB hub root, you must disable the option called allow the computer to turn off this device to save power
  You can find this option in the properties-> tab power management

• A previous network connection lost

  My ethernet network consist of:

  -2 workstations Windows 7 cables

  -1 Windows 7 WiFi laptop computer

  -1 office wired Windows XP

  - and a HP C309a printer cable

  Everything seemed to be initially connected to the network working group when switched on via a router Airport Extreme with Internet access via a modem Telco.  Once the modem has failed, a Telco modem/router was provided as a replacement.

  Since then, one of the Windows 7 desktop computers is no longer connects with the WORKING group.  Initially, the cable has proved defective when the Internet and HP printer could not be connected through the router.  A new connection of cable to the Telco router has restored the Internet but still cannot detect the HP printer even through its IP address.  I confirmed that the Office XP always connects to the printer via the router so that all interconnection cables seem to be OK.  After checking that the WORKING group and the permissions settings appear to be the same, and reinstall the printer drivers and software for this office, there is still no connection with the WORKING group or the printer.

  In summer, all other workgroup devices connect through the router and the Internet, but 1 desktop computer only connects to the Internet.  I noted that the network connection for this desktop watch network 6, while others show network 4.  Maybe that's the problem.

  I need help to reset the settings of office 1 network WORKING group to be compatible with the rest of the devices.

  In computer networks, Teredo is a transition technology that gives full IPv6 connectivity for IPv6 compatible hosts serveInternet IPv4, but have no native connection to an IPv6 network.

  http://en.Wikipedia.org/wiki/Teredo_tunneling

  Overview of Teredo

  https://TechNet.Microsoft.com/en-us/network/cc917486.aspx

  Did you see a yellow triangle next to Teredo Tunneling?

  Try the following:

  1. Open command prompt with credentials for administrator (find CMD and right click - Run as administrator).
  2. Enter the netsh environment. Type "netsh" and ENTER.
  3. "int teredo" and ENTER
  4 ' set disabled state' and ENTER.
  5. open the Device Manager and uninstall "Teredo Tunneling pseudo-interface".
  6. open the command prompt with administrator credentials once more.
  7 netsh + ENTER.
  8. "int ipv6" + ENTRY
  9 ' set teredo client' + ENTRY
  10. open the Device Manager and the analysis of new hardware.
  11. Select 'Show hidden devices' in the view menu. You will see while it is present without errors

  See response to HairyFool:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-to-share-a-Internet-connection-between/b2e54f85-0bca-47CA-9195-5b26fbcee185

• Network connectivity lost every 24 hours after the migration of DVS

  Hello community...  Well, I'm puzzled again.  I am running a vSphere 5.5 U3 environment with the latest patch.  I'm going through certification VCP - VTC prep and decided to migrate my (lab at home) environment of standard virtual switches to virtual switches distributed as I have not had a lot of experience with them so far.  Migration seems to be okay.  Before migrating, I used three different 1 Gbit/s links a group of hash LACP-IP on my standard vSwitch.  I have several VLANs for different laboratory networks.  One is specifically used as a DMZ for the WAN to my ISP connectivity.  I created a virtual machine for use as a firewall with multiple network cards, which one is connected to this VLAN WAN.  On the standard vSwitch seemed to work exactly as expected.  For some reason any after moving to a DVS, the firewall VM needs to be recharged all morning before the full network connectivity is restored.  It's a strange problem.  I tried to re - create the virtual machine and play with the security settings of DvPortgroup, but the problem persists.  Anyone out there have any ideas as to what could cause this?

  Oh, a little more in detail...  I moved from hash balancing LACP/IP road based on the physical NIC load with the migration to DVS.  Remove groups from the aggregation of connection of the switch too.

  Well, change of load balancing policy and upgrade the DvSwitch to version 6 did not help.  However, I stopped the machine virtual and added 4 E1000 NIC as a test.  I've reconfigured the firewall VM to use the new cards instead of the VMXNET3.  Load Balancing has changed back to "load depending on the physical NETWORK card" and always use VGT to separate traffic.  From now on, he went the longest without experiencing the issue so far.  About 16 hours so far without having to restart the virtual machine.  Will keep posted guys.

• network connection lost alarm

  Hello

  alarm sails host shows "Lost network connectivity" and "Network of uplink redundancy lost" errors in vCenter red Rectangle symbol and came on the host, but all VM and servises performs very well what was the reason for this alarm and what is the solution for this.

  In this case it could have been a temporary problem with the network, which is already solved. To get rid of the alarm message, you will need recognize/reset the alarm.

  André