Apple TV 4 does not work correctly when it is connected to both wifi and Bluetooth speakers. Screen blurry when you try to play HD video Apple TV connection to Bluetooth speakers

Similar Questions

• Match pattern does not work correctly when you are looking for a null character

  I use the match pattern to retrieve a string NULL completed a response, I'm getting a device on a serial port. The VI is attached and here is a screenshot of the block diagram.

  It works very well with the index value 0, 1, or 2. When index is 3, I get the result below.

  Why model matching is not finding the null character?

  Thank you!

  

  

  I'm Datura, need to remove the cable from the shift control for the control of the match pattern.

  DUH!

• Key board does not work correctly when you type. Can not get the system restore to work properly, either

  Tried to run the system restore, but it will not restore.

  Hey AnnEdelstein,

  Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.
  Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!

• Application does not work correctly when I press a CommanButton

  Hi all, I'm having a problem with weblogic 10.3.5.
  
  It turns out that an application created with JDeveloper 11.1.5, I have test and all is well in that the JDeveloper integrated Weblogic.
  
  But when to deploy on a stand-alone 10.3.5 weblogic server, the application does not work correctly when I press a CommanButton to go to another search page (the 'action' property is properly set), but nothing happens, remains in the same home page. Similarly when a link of commanButton to run a workflow, it does not work, however in the integrated JDeveloper to Weblogic it works correctly.
  
  How can I solve these problems?
  Thank you.

  One thing you shouldn't do is add '.jspx' to your URL. This shows the page, but does not start the life cycle of faces that show not work button not working navigation.
  Use

   http://:7001/myApp/faces/index
  

  And it should work.

  Timo

• HP 7612: I have a 7612 Officejet from HP that worked wireless but now does not work. When I try to

  I have a 7612 Officejet from HP that worked wireless but now does not work.  When I try to open the Network Setup Wizard a message indicating "wireless communication has been disabled. Can someone please?

  Thank you!

  hhmenar

  Hey @hlhmenar,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with the wireless settings is disabled on your Officejet Wide Format e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see happens shortly.

  Please let me know the results after following the above. If you can run the wireless setup, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Windows Defender does not work. When I try to turn it on, I get the message "not responding".

  Original title: Windows Defender

  I have Windows Vista and my Windows Defender will activate/doesn't not work.  When I try to turn it on, it responds by saying: 'it is not responding' and stops automatically.  I tried to re - install & who did not work.  Any ideas.

  Hi lskdjfoie,
   
  What have you tried to reinstall? Windows Defender or other programs?
   
  I suggest the following steps and check.
   
  Step 1:
   
  Usually if you have a third-party security software installed, Windows Defender would not work. I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  If this does not help, I would say you scan SFC on your computer and check if Windows Defender works fine.
   
  Step 3:
   
  If none of the steps helps create a new user account and check if the problem persists.
   
  Let us know
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I get an error COOD11B1 code when you try to play a video clip. __

  I get a COOD11B error code when I try to play a video clip.

  Hi Pat dubois,

  1. what type of video file that you are trying to play?

  If you receive error C00D11B1 code,

  Cause one. It may be a problem with the components of security of your digital media player to play the files on your computer

  Follow the instructions in the article given below, because it can help you solve the problem

  Windows Media Player C00D11B1: http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

  Go to http://drmlicense.One.Microsoft.com/Indivsite/en/indivit.asp , then you will need to get the update. You need to download this patch to remove the error code and everything works again.

  Also take ownership of the files you are trying to play by right clicking on the file and taking possession.

  B cause. If you are probably trying to play a file that uses a codec that is not on your computer. I suggest you to download and install the latest pack of codecs for Windows Media Player 12 on your computer. Search using your search engine preferred for the third-party codec packs.

  Codecs, frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  NOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Always get a sign on screen when you try to play the video from Netflix in Windows Media Center

  When I try to play a video on netflix by MediaCenter, he shoots me a sign on the screen and then usually I want to type anything on the subject.  I already have my information saved, but this still happens and I can't watch anything on the MediaCenter.  Anyone know why this is happening?

  Hello

  I suggest you follow the link control.

  I also suggest you to contact Netflix support to get help on the issue.

  Limits of support for Netflix in Windows Vista Media Center

  http://support.Microsoft.com/kb/972151

• Taskmgr.exe does not work. error when you run gpedit.msc: "one or more activex controls could not be displayed either...". "- old deleted restore points.

  Dear all, Hello, hope you are doing well.

  
  

  My thinkpad t42 machine with xp sp3 OEM has a problem, unfortunately.

  Task Manager is not running.  A small timer appears when ctrl + alt + delete is pressed. nothing happens.  Taskmgr.exe fact exists in the system folder.  This has been verified.  The same thing happens when you try to start the program via a double-click; nothing.

  When checking to see that the Task Manager was not blocked under the administrator account, there was an error in the gpedit.msc program - namely:

  internet Explorer: "(one or more ActiveX controls could not be displayed because either (1) your current internet security settings prohibit running ActiveX controls on this page, or 2) you blocked an editor of one of the controls." As a result this page may not display correctly. "It is a double popup as well.  When you press ok, the same error message box appears again.  Reset all settings of security of IE8.  Made no difference.

  the same error message is produced with the software lenovo "thinkpad update" - once again in the framework-

  
  
  

  Someone (not me) downloaded a program called "personal internet security ' on the machine and also a"registry fix"program that has an icon of similar colors to the windows logo icon, but the colors were reversed (the name of it escapes me) - these programs pourrait the root of the problems and why the machine does well.

  To solve; First, Avast has been run on boot to the top, and about 8 programs have been removed.  (Some of these programs may have been dependent on or related to another...)

  Then, microsoft's free antivirus has been downloaded - but - it wouldn't install, giving a general error.  The same error was given, for Microsoft security program, when Avast was uninstalled.

  A Microsoft security scan is run from the Web site then, and he says that the computer is virus free, even if it has changed some previous registry changes.

  To fix the Task Manager, difficulty in registration of Microsoft was found to be proposed here -http://support.microsoft.com/kb/907343 - but then there was a '0' already in the field.

  Having become frustrated with all hacking around records etc, it was decided to go to an older Restore Point.  The last of them visible was in December, and it would not actually go to these old restore points.  The error said: Please try a different restore point.  Having received updates xp at the same time to that, these restore Points have unfortunately disappeared and no restore points exist where the system is stable.

  If someone like me that the machine still has something?

  If someone could suggest a solution for me that would be great and would really make my life less busy in trying to solve this problem - my area of expertese is certainly not it if someone could help me it would be very much appreciated...

  Sincerely,

  D

  The process of deletion for Personal Internet Security 2011 is well documented.

  It is not some ' try it or try things "and see if it works the kind of process.

  You won't fix with Avast, and a large number of malware just laugh at all Microsoft malware detection and removal products.  There is little to fear Microsoft analysis tools.  I can get my system on purpose infected two dozen ways and Microsoft will tell me that there is no problem.

  Removal and detection of malicious software is not Microsoft expertise area.  There are businesses where malware detection and removal, it is their area of expertise, and that's all they do throughout the day, so you better stick with them for the easy stuff.

  You will not fix your system and try things or any amount of piracy.  It will fix you knowing what you're doing and using methods that other people have already understood by the practice and the real real world situations.

  If you want to remove it and do not have to reinstall your XP, you should consider going to a forum where malware removal experts hang out.  You know... people who really know how to actually remove the stuff and did it successfully.

  This means that people have got their systems infected by the malware on goal several times and practical detached until they understand the malware and how it works well enough to write a removal procedure.  They did try them all things for you.

  You can mess around with other things to try that perhaps sometimes could work, or you can follow the procedure who already figured that will work all the time.

  If you faithfully follow the removal instructions and you still have questions, there is link at the bottom of the instructions for further help.  Although everything that has already happened or attempted to apply may have complicated your situation beyond the reasonable expectations of repair.

  Here is the link with the instructions to get started:

  http://www.bleepingcomputer.com/virus-removal/remove-personal-Internet-Security-2011

  It's my contention that, once your system gets afflicted by malware of this magnitude, you should not trust any of current Restore Point.  When finished remove malicious software, all your Restore Points are not trustworthy and you must knock out all and start over with new Restore Points.

  If you want to get your task manager will, navigate to c:\windows\system32 and make a taskmgr.exe and call the copy something like jose.exe.

  Then you will be able to launch jose.exe (double click), and the Task Manager opens.  The malware will not allow taskmgr.exe to be a running process, because he knows that's what you use to try to remove it.  So far, malware knows no jose.exe (this may change).

  You will probably like Process Explorer better when even when you get the hang of it, but you can get your task manager go.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Internet does not work on Windows 7, no drivers for the Wifi and LAN

  Original title: Windows 7

  I used to have Windows 8 on my laptop. Well, so I've updated for Windows 10. Config my laptop wasn't as good, so it's slow. Recently, I installed Windows 7 (as it is known for the performance) somehow, the internet does not work. Missing the drivers for the wifi and lan. What should I do?

  Well, as my readers usb and touch screen no longer work.

  You have installed Windows 7 on a machine that is preinstalled with Windows 8, without checking first if the computer manufacturer supported and provided Windows 7 drivers for it.

  If does not support or provide Windows 7 drivers for this, you should never have installed Windows 7 on this computer Windows 8 and we cannot help you.

  Reinstall Windows 8.

• No internet connection not found message when you try to play Netflix in Media Center

  Original title: netflix on media center to windows

  When I try to play Netflix on wmc I get no internet connection found message even if I am connected to the internet.

  Hello

  You can try the suggestions in the link given below and check if that helps.

  http://thegreenbutton.com/forums/p/83065/414939.aspx

  See also:

  http://support.Microsoft.com/kb/972496

  Hope that information was useful

  Amrita M

  Microsoft Answers Support Engineer

• Wireless Mouse 5000 does not work correctly when moved away from the transmitter.

  I have the mouse as shown in the title with new batteries.
  Link: http://www.microsoft.com/hardware/en-us/p/wireless-mouse-5000/MGC-00017
  My installed OS Windows 7 x 64 SP1. A clean installed on the computer without additional software in the meantime.
  When I connect the transmitter (2.4 ghz v7.0 model 1423) the mouse to the computer, it identifies only, and the mouse works.
  In devices and printers, the transmitter is under indefinite and after installing IntelliPoint 8.2 64-bit for Windows 7, it remains the same.
  Sometimes the mouse does not react on the screen, as it got stuck and moving in parts rather than sequentially. Including the mouse buttons that do not meet at the moment.
  If I bring the mouse close to the transmitter, the problem goes away and it works fine.
  After the test, no relation to the load on the processor, the problem appears randomly.
  I tried to replace USB ports but no change, the problem goes away only if I put the mouse close to the transmitter.
   
  Original title: Wireless Mouse 5000

  Hello Tomer,.

  Thanks for the reply.

  You can check the following items and check if it helps to solve this problem:

  The wireless keyboard or mouse may not respond and may start and stop at irregular intervals
  Troubleshoot a wireless mouse that does not correctly
  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  If the problem persists always, as mentioned above, contact Microsoft Hardware support for assistance. All material related to problems are treated by them.

  Email us if you have any other issues related to Windows.

• Bug? : layers.add () does not work correctly when called from the menu (ID/CS6/Win7)

  Hello Devs,

  I am facing a mysterious problem with the layers.add () method.

  I am trying to create n number of layers for my document. So I decided to create a menu for that.

  I created two scripts

  1. for creating menu & menu action.

  2. real script that creates n number of layers.

  When I run the script #2 of ESTK directly it works fine.

  Now when I try to call the same script in the Menu it does work very well. Only the last layer is created.

  Script 1: LayerPopupMenuAction

  #target indesign
  #targetengine createLayerset
  var layerTemplateScript = File(File(getActiveScriptPath()).parent.fsName+"/IntializeTemplate.jsx"); 
  
  var initTemplateHandler = {
      'beforeDisplay' : function(ev)
          {
              ev.target.enabled = (app.documents.length>0);
          },
      'onInvoke' : function()
          {
              app.doScript(layerTemplateScript, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "Initialize Script");
          }
      };
  
  var layerMenuAction = app.scriptMenuActions.add("&Create Layer Set");
  
  for(var init_ev in initTemplateHandler) {
      layerMenuAction.eventListeners.add(init_ev, initTemplateHandler[init_ev]);
      }
  
  var refMenuItem = app.menus.item("$ID/LayerPanelPopup");
  refMenuItem.menuItems.add(layerMenuAction, LocationOptions.AFTER, refMenuItem.menuItems.item(2));
  
  function getActiveScriptPath() {
      // This function returns the path to the active script, even when running from ESTK
      try { 
          return app.activeScript; 
      } catch(e) { 
          return e.fileName; 
      }
  }
  

  Script 2: IntializeTemplate

  #target indesign
  if (app.documents.length == 0){
      alert("Please open a document and try again", "Document Error", true);
      exit();
      }
  
  var templateDoc = app.activeDocument;
  
  var layerNameArray = ["Fixed_Static_Assets", "Absolute_User_Assets", "Relative_User_Assets"];
  CreateLayers(layerNameArray);
  
  alert("Initialization Successful");
  
  
  //--------------------------------FUNCTIONS ARE DEFINED HERE--------------------------------
  function CreateLayers(LayerNameList){
      var layerListLength = LayerNameList.length;
      var layerObject;
      for (var ln=0; ln<layerListLength; ln++){
          layerObject = templateDoc.layers.itemByName(LayerNameList[ln]);
          if (layerObject.isValid==false){
              layerObject = templateDoc.layers.add({name:LayerNameList[ln]});
              //$.writeln('Layer Creation: ' + layerObject.isValid + ' for '+layerObject.name);
              }
          }
      //Merger Default Layer with the bottom layer:
      var defaultLayer = templateDoc.layers.itemByName("Layer 1");
      if(defaultLayer.isValid==true){
          //$.writeln('Default is Valid and will be merged with top most layer');
          layerObject.merge([defaultLayer]);
          }
      }
  

  Any help / advice on this topic will be useful.

  @Marijan Tompa [tomaxxi]: I googled for the solution and I noticed that you have already worked on the same type of script. Please help me if you can.

  Thank you

  Green4ever

  Hi Green4ever,

  I think at a first sight, UndoModes.FAST_ENTIRE_SCRIPT , who, as you may know, can scramble deeply the script steps, especially when one ... try statement catch is used.

  Try to replace FAST_ENTIRE_SCRIPT by ENTIRE_SCRIPT and tell us.

  @+

  Marc

• Why do the mouseout/mouseouthandler() and mouseOver not work correctly when you use a dynamic textfield?

  Hello
  
  I made a movieclip with instance name: cs_btn
  
  Inside of that movieclip, I have two layers. Bottom and top button dynamic textfield.
  In this scenario, I have a 'more' 'out' 'down' and 'up' labels image.
  
  It works fine, but when I use a dynamic textfield, the passage of the mouse and the MouseDown event are triggered
  also when you hover over the textfield object. Even when I turned the selectable property.
  
  Any idea of what is the cause?
  
  In the main timeline, I made this script:
  
  function cs_buttonEvent(event:MouseEvent):void {}
  
  trace (Event.type);
  
  Switch (event.type) {}
  case "mouseDown":
  event.currentTarget.gotoAndPlay ("down");
  break;
  case "mouseUp":
  event.currentTarget.gotoAndPlay ("up");
  break;
  case 'mouseOver ':
  event.currentTarget.gotoAndPlay ("over");
  break;
  case 'mouseout/mouseouthandler() ':
  event.currentTarget.gotoAndPlay ("out");
  break;
  by default:
  trace ("mouse five event");
  break;
  }
  
  }
  
  cs_btn.addEventListener (MouseEvent.MOUSE_DOWN, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_UP, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_OVER, cs_buttonEvent);
  cs_btn.addEventListener (MouseEvent.MOUSE_OUT, cs_buttonEvent);
  
  

  You can assign the check fake gold button mouseChildren property the
  target in the event handler.

  function cs_buttonEvent(event:MouseEvent):void {}

  If (event.target! = cs_btn) return; bug out

  trace (Event.type);

  Switch (event.type) {}
  case "mouseDown":
  event.currentTarget.gotoAndPlay ("down");
  break;
  case "mouseUp":
  event.currentTarget.gotoAndPlay ("up");
  break;
  case 'mouseOver ':
  event.currentTarget.gotoAndPlay ("over");
  break;
  case 'mouseout/mouseouthandler() ':
  event.currentTarget.gotoAndPlay ("out");
  break;
  by default:
  trace ("mouse five event");
  break;
  }

  }

• table or view does not exist error when you try to generate tables of database online.

  Hello

  I use Jdeveloper 12 c and is trying to generate tables of a database in offline mode, I created, for a connection of database online. The error message that appears is:

  java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist.

  More information:

  The database I use is Oracle11g Database Release 2. And I get a warning saying that the 12 c functionality will be lost when generating an 11 g database.

  In addition, the problem occurs only when I have foreign key constraints in my table. All the other tables that have no foreign key constraints generates very well.

  Any ideas why this happens?

  Thank you!

  Instead of directly generating the DB, generate a sql script. Then, you see the generated statement and can run the script using a db sql worksheet.

  If you get the error, you can view the script here.

  Timo

• Blank DVDs does not get recognized when you try to burn DVDs.

  Original title: CD/DVD/player burner needs help

  My laptop cd/dvd drive / burner, he is no acknolwedge a blank dvd, but it will be a blank cd, it will also play both, im trying to burn a dvd, but it is not acknowling that one is in the burner, it was working fine yesterday... Please help

  Hi PatriciaKnight,

  ·         You get the error message?

  ·         What application are you using to burn on DVD?

  ·         Remember to make changes to the computer, after which the issue started?

  I suggest you try the following Microsoft Fixit and/or the steps from the following links in the article and see if it helps:

  Your CD or DVD drive cannot read or write media

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  I hope this helps.