Apple TV 4th generation very slow to load movies (MP4)

Similar Questions

• Apple TV (4th generation) not supported

  My Apple TV (4th generation) worked very well, Soddenly I get message on television that not supported. I connect it to my computer and updated the software to 9.2.2 but still same message, any help

  Hello. Which is exactly the message you see? Are you sure that's coming from Apple TV and no the TV set? What do you do when you see the message?

• Apple TV (4th generation) applications

  I just ordered my second Apple TV (4th generation).  Is it possible to copy the apps I have on my first, or do I have to "re-load" them on the new?

  You will have to reload them. Rather than built in because they are on older models, apps must be downloaded or purchased for the generation device 4.

• Unable to connect accounts on Apple TV (4th generation)

  Hi, I bought an Apple TV 4th generation (32 GB) and not matter what I can't seem to connect my accounts.

  Here's what I've tried so far:

  -Config the Apple TV using my iPhone. It is fine to find the wi - fi network, but when I am asked to insert the Apple ID and password on the iPhone, the apple TV keeps stuck forever.

  -Config the Apple TV manually. I config the wi - fi properly, put on my Apple ID. When I fill out the password, I get a screen of white loading forever.

  -Config the Apple TV manually and move the connection from the account. I can enter with success of the home on the Apple TV screen. When I go into settings > accounts, the only account that I am able to connect is the family sharing one. All others (iCloud, iTunes Store, Game Center) lead me to the white loading forever screen.

  I don't know what else to do. I also tried to connect using Apple ID of my fiance, but got the same result.

  I hope to get help!

  Welcome to the Apple community.

  You use the settings to the correct location.

  Have you tried to reboot the router of network.

  You can try the Apple TV to another place (use a different network).

• I have an Apple TV 4th generation. He had since Christmas 2015. I love it! All of a sudden Siri left hear my orders. It shows in my TV screen, as it is to listen, but never hear my order.

  I have an Apple TV 4th generation. He had since Christmas 2015. I love it! All of a sudden Siri left hear my orders. It shows in my TV screen, as it is to listen, but never hear my order. Have tried all the tricks. Restart Apple TV, adjustments to settings etc... Nothing works. Just waiting to hear my order. The only other question that began at the same time, it is that the remote Siri now will control the volume on my TV. TV turns on and off with Apple TV, but volume control not responding. I now use the TV remote to adjust the volume.

  Please notify

  There is a problem with siri does not work when accessibility > zoom is enabled in the settings which I hope will be corrected in the next version, because now disable zoom works around this problem.

  I think that questions about the th volume control are a separate issue and possibly caused by something you did everything trying to solve the problem of siri. Have you checked the volume control settings are properly.

• 12 Firefox is very slow to load pages and if two tabs are open, it lag.

  12 Firefox is very slow to load pages and if two tabs are open, it lag. I've tried everything (e.g. virus, Defrag, I created a new profile in "run", etc.). I had my router/line checked everything etc and after 2 weeks of cleaning/testing etc its all pointing to Firefox as the problem. Please help because it's driving crazy me.

  
  

• Apple TV 4th generation has need of restoration

  I bought my Apple TV 4th generation in the UK and I use it to good advantage here at home, in Bolivia. However, when I switched it on the other day he said that I needed to restore the software. That's when I discovered that I needed a USB, USB - C cable. In all of Santa Cruz, Bolivia, after much research, I managed to get a cable. Why oh why Apple don't provide this cable with the TV? They provide a lightning cable to recharge the remote control.

  Anyway - my question to the community is - everyone knows a 4th Gem Apple TV which must be retired? I used a 2nd generation Apple TV for a few years with no problems at all. Restores a normal need?

  I had a lot of mountain BIKING throughout the years and never had need to restore, and most will never do. For those that do they choose to get a cable or take it to Apple

• On the new Apple TV 4th generation, can I turn off bluetooth as possible with the 3rd generation?

  Hi, on the new Apple TV 4th generation, can I turn off bluetooth as possible with the 3rd generation?

  I don't think it is necessary for the remote control of Siri.

• My problem is that I bought apple tv 4th generation of the United States. now I want to use it in India, where it is common to 220 volts, but in the United States, it is common to 110 volts. Can I use the apple tv in India?

  My problem is that I bought apple tv 4th generation of the United States. now I want to use it in India, where it is common to 220 volts, but in the United States, it is common to 110 volts. Can I use the apple tv in India?

  BBought Apple TV USA for my children in Europe (220V).

  No problem, just replaced the plug

• Why wireless keyboards are not compatible with the Apple TV (4th generation)?

  Why wireless keyboards are not compatible with the Apple TV (4th generation)?  Similarly, why didn't the App compatible with Apple TV Remote (4th generation)?  They will be in the future?

  No one here knows why Apple have so far decided not to support Bluetooth keyboards, or if they are likely to do so in the future. The iOS app is compatible with the 4 ATV in its latest version (4.2.3) - https://itunes.apple.com/gb/app/remote/id284417350?mt=8

• Apple TV (4th generation) can turn on Bose Solo?

  Although the Apple TV (4th generation) is able to turn on our Sony Bravia and control the volume of the Bose Solo I was not able to determine how also to TV on the Bose Solo tour. Documentation of Bose States that it is possible for another device to turn it on. Can someone explain the configuration steps necessary?

  What you describe is called HDMI-CEC. This is not possible because the Solo 15 Bose does not have a HDMI connector. Which is probably referring to the documentation is auto-sleep. It's the Solo of Bose to wake you when it detects a signal to one of its entries. This is described in the manual of Bose Solo 15 on page 12. Press and hold the power button for 5 seconds to toggle the auto-sleep function. The led now lights up amber and the Solo you wake up when it receives a signal. After 60 minutes of no activity there and then disappears.

• DIAdem v11.1 SEEN very slow to load pan and zoom 2D graphics axis

  As for the user KJ2, I find DIAdem version 2011 very slow when loading the data in the display.

  I have two laptops, a DIAdem 2010 operating and the other the new 2011. IAM loading the same PDM file into two versions.

  The 2010 takes more time initially to load the data in the browser window, but it is almost instant when zoom and pan in the display window.

  Load the file instantly in the browser of the 2011, but then takes an age to zoom and pan, which is very frustrating when the analysis of the data.

  I can improve performance at the 2010 level if I load the data with an interval of small applied reduction (factor 2) - once again, it takes much more time to load in the browser window, but is now usable in the view window.

  The only problem now is that all channels are renamed with the Appendix "sample".

  I guess that's a result of the new feature 'optimised loading data' which I guess is only load the data when I need IE when zooming and panning in the display!

  Help please, before I resort to re - install 2010!

  Karoline

  Hello Albert,.

  It is a relatively easy solution:

  In the BROWSER, go to the menu "settings":

  

  In the dialog box that is displayed, change the setting of data "always load in bulk.

  

  Alternatively, you can also change this in the dialogue box "parameters: compatibility", but I don't know what is the difference between these two methods.

  Hope that helps, no need to return to the 2010 version after these changes. Oh and don't forget to save your configuration file after making the changes to make them permanent!

  Otmar

• I'm runinng Windows XP Home Edition 5.1 Service Pack 3 but my computer is very slow when loading files could you tell me about the software to speed things up please

  My computer is very slow runinng when I'm checking my Email and sorting out when I delete the emails I don't want it seems to take more than five minutes to remove as it is very slow to load web pages from the Internet

  HI Bob,

  Unless you use MSE and think the problem is caused by malware (which is possible, but not very likely given the much more likely reasons - however, if this is the case, after return and we will be happy to provide instructions on how to clean your system and check that this has been done correctly and completely) please repost it here for help on this issue: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance?page=1&tab=all&tm=1300700638376 where experts in the field are better qualified to help you.

  Good luck!

• Homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using the homegroup.

  Group residential slow and other problems with it

  Hello!

  I have 3 Windows 7 PC-s (office #1, #2 desktop and laptop). I created HomeGroup and join all computers, so I can access the files on each of them. But my problem is the following: homegroup is very slow. Loading files from another computer is very long and I can't watch movies on the wireless using homegroup, because it is slow and every two seconds of loading film. And also needed a few minutes to open the pictures (more than 10 GB in all folders) to a folder in the other PC. Why is this work so slow? I don't think there is a problem with slow wireless router, because I can replace my old Linksys WRT54GL Linksys E4200, which is able to transfer video HD 3D such as Linksys provide. What should I do to fix this? Should I change all the settings in Windows, perhaps in the router...?

  And why my laptop is not always visible to the other PC to homegroup? He see two others and two other sees, but they are not portable. This happens sometimes. But then I still share with homegroup libraries to my laptop and there still other computers see it and all shared libraries. Where is the problem? I also try to change the HomeGroup services automatically, but this does not solve the problem.

  If I forgot something to write, or you need more information, do not hesitate to ask.

  I'd appreciate any help really.

  Hello

  Manually check manufacturers sites WiFi because pilots offered through
  Updates Windows will most often not be later (MS is far behind certifying)
  drivers and many manufacturers do not quickly submit newer versions or not at all). See
  Manual driver update of the methods below.

  The question could be WiFi in fact however try to device (hardware)
  update the driver first.

  What antivirus/security is used? Some of those who will cause problems with the
  Homegroup. Since it happens more often on a single computer that on there
  a check.

  From this link:

  Homegroup: frequently asked questions (also shows how delete and remove homegroup)
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  "Only people who belong to the homegroup can see shared libraries. You can also share libraries or files and individual folders with specific people in your homegroup, rather than share them with everyone. For more information, see libraries with your homegroup sharing and keep files and folders to be shared with a specific residential group. »

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  ==================

  How to upgrade manually the drivers:

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as windows
  7 love the updated drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec