Apple TV Airplay of 4 works is not in Sleep Mode
Hi all
I have a problem with my new ATV4 and the use of airtime. If I turn on the ATV with the included remote control, I have no problem using airtime and everything works as it should. However, if I put my ATV in standby mode after a few minutes the Airplay icon will disappear and I am not able to start it by sending the contents of airtime to it (btw the remote for iOS devices app is also not able to connect in standby mode and run it). Now, I've already owned an ATV2 and with this device I've ever had any of the problems noted above. I tried many things such as giving the ATV a fixed IP address, deactivation and reactivation Airplay, restart and finally completely restore the device. After that nothing helps I contacted Apple for support and after several calls which included to restore the device again once they are now trying to tell me that my problem is
not a problem at all, but it is intentioned behavior of the device. Please can someone of you confirm that you are able to connect to your ATV4 also during the night before and wake up, it? With this information, I would then contact support again.
I already thank you in advance and best regards
Oliver
Yes, I am able to launch an event Apple AirPlay TV 4 sleeping. In my particular case, I have a mixed network (ethernet and wifi) between the two devices.
Tags: Apple TV
Similar Questions
-
Satellite A300-1HP is not in sleep mode after 30 minutes inactivity
Satellite A300 1HP is not in sleep mode after 30 minutes inactivity.
Windows settings are OK (I'm an experienced user).
He goes to sleep, if I do it manually (by pressing the power button) - but not after inactivity,Any idea?
Norbert.
Hello, Norbert
Maybe you should check the settings of Vista power again. I have too many A300 and everything works fine.
I tested it with all three power plans. Have you done the same?Usually, I use the BALANCED power plan and enter mode standby 20 minutes correctly.
-
Color HP Laserjet Pro 200 M251n does not in Sleep Mode
Printer: HP color Laserjet Pro 200 M251n
Firmware: 2014-06-04, Version 20140521
Problem:
Since the last update Firmware the printer does not sleep/wake no event (all configured to wake up the printer) will wake up the printer. Even to connect via Webinterfac the printer does not respond. Ping also fails.
Tried to connect the printer to the printer ports / wall plug changed network cables nothing worked.
The only solution is to reset the printer (power off / on) to get the printer working again.
Played a bit with the EcoSmart configuration, but little matter what is selected it its always the same as the printer stuck sleep/sleep mode and don't responde.
Y at - it somewhere the old FIrmware to download to try a downgrade if it would help?
I really don't think there is anythink else I could try.
just to confirm that the last Firmware update solves the problem
If I remember correctly it when, one day in December when it came out
-
Windows Media Player 12 on Windows 7 stops working after recovery from sleep mode
I have problems to make Windows Media Player 12 to run correctly after a system sleep (standby). It works very well after the maximum boot and for as long that the machine is not going mode sleep. It is only a problem with Windows 7 and Media player 12. All other Win 7 applications seem to work correctly. The system also works very well for Vista/Media player 11.
I installed my upgrade Windows 7 Home Premium x 64 as a new installation on a separate hard drive. This problem exists right after installation - no other software not added. I then installed all the updates MS available and the problem has not disappeared. I installed the OS a couple of times (including a copy of Windows 7 Professional x 64) on another hard drive too and the problem remains.
Media Player 12 works perfectly until the system goes into sleep mode - either by itself, or manually. When it resumes, Media player launches, but when you try to play something, he will only play the first couple notes of music and then freeze. Same thing with videos - it will get the first couple of frames played, and then hang. If you continue to stop and restart Media Player, eventually it will be totally suspended and after a few minutes the error "Server execution failed" message. At that point in the Task Manager, wmplayer.exe will consume is a complete base my Quad CPU (25%), do nothing. Sometimes, you can kill the process and take control of the back of the PC. Other times it crashes completely and the only thing you can do is to shut down the PC.
Media Player 11 under Vista Home Premium x 64 on the same PC works fine. I was never able to get Media Player 12 in Windows 7 to work properly after a standby/on standby. If I reboot, everything works fine so it seems to be that something related to a problem of sleep/recovery.
HP supports suggested restarting the service WMP network sharing. That has not helped, but if I stopped and set to manual start, Media Player would play the sound/music but not video of several tests. But if I stopped and began to WMP 12 a few times more the problem returns.
Well after working with the help of HP for several days, it seems to be something between the video card and card mother / BIOS between them. At start-up, everything works well, but after the exit mode ensures, hardware diagnostics show a failure of local video memory. Media Player is finally touched by it. Doesn't a lot of sense to me that this does not happen under Vista, Win 7. You have to return the PC to HP for diagnosis/repair.
-
Satellite P30 Pro: Will not properly sleep mode
Hello
I do not normally use the standby feature, but it hibernates.
Recently, I started using it, so I keep the supply charge of the power supply of the wireless mouse.
Unfortunately, he's not exactly going in standby mode it used to - I close the lid and I can hear the fan turns off after a few seconds (about 20) standby red LED flashes and then they come back after 5/10 seconds and stays on.The standby light goes green on and in practice, it is, switches the screen off the power and the ADSL connection - that's all.
I did close the cover of the last night and found this morning with 3 green LEDs on the fans running!Any help?
Please note that the settings are correct - I just checked and it is set to go into sleep mode by closing the lid.Thank you
MoboPS: Lately, I have day a few drivers from the Web from Toshiba site (can't remember which)
Hello
If I understand you right, the laptop is on standby and it s is always connected to the local network.
Well, maybe there is a wake-up on LAN enabled mode who wakes the machine automatically to standby mode.
Try to access the BIOS and LAN / WLan, settings on the card and if necessary to disable this option.
-
TrackPoint and Touchpad stops working after recovery from sleep mode
Every now and then when my thinkpad edge 11 out of the previous day. The pointer doesn't move. It makes no difference if I use the trackpoint or touchpad. In this case I have to restart the computer using the keyboard and then pointing devices up and running again. No one knows how to fix this? The problem does not occur every time during the recovery from sleep mode, but sometimes it does.
Hey won1,.
uninstall the current driver for touchpad/trackpoint for your device.
Windows should then install its own generic drivers. now with generic drivers install, place your unit in standby mode and then resume.
see if the same error occurs. in the meantime, go to > http://support.lenovo.com and update your drivers in the bios unit.
-
Z3 Compact scenes works is not in manual mode of the camera
Hello. This is my problem: when I use the manual of the camera, the scn button is gray and does not, then the HDR. They worked when I bought the phone at Christmas... No root mod etc. Please help me!
http://support.sonymobile.com/global-en/xperiaz3compact/Userguide/using-still-camera-settings/
It should be set to manual mode to 8 megapixels
-
NET snap works does not properly in mode double screen.
If you host my party of liberation last night, I hooked a second monitor for the first time. 7 overdraft and configure properties for correct display fine. But, when I went to her to show the "Snap" function, he had a strange quirk. To grant the full screen to a window for each display fine, but the function of the software component plug-in mosquito net only works on the outside edge away from the monitor. It would not align itself with the inside edge on each monitor. So, I finished with a hole the size of half of each of the 2 screens on my extended desktop. I'm sure that there is no setting to change this, but perhaps Microsoft could apply a patch in one of their updates.
The "inside edge" your desktop is extended on several monitors is not an advantage, it is a staging area. The snap going to the edge of the desktop computer, not the monitor.
Messages rating helps other usersMark L. Ferguson MS - MVP
-
Trackpad works is not in offline mode
Original title: trackpad function
I'm running win7 64 bit ultimate laptop. Recently, I found that the trackpad does not work in offline mode. However it works when connected using net
Hello
1. What is the brand and model of your laptop?2. What do you mean by "trackpad does not work in offline mode?
3. have you made changes on the computer before this problem?
Method 1:You try to run the Fixit.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/
Method 2:
This could happen if the drivers are corrupt or needs an update.I suggest that you visit the laptop manufacturer site download and install the latest touchpad drivers, check if it works.
For more information visit http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properlyIt will be useful. -
Copy / paste doesn't work is not in design mode...
I work on a project and we have to use a layout that is not one of the layouts of dreamweaver. I use DW version CS5 and I copy and pasted a max design layout in a new file called index.html; Also, I generated a CSS page and copied this information also to keep the style. All is well in live mode view, but now the problem I have is that I'm not able to change my index.html in design mode, I can modify it in code view but not design mode and I need to change it in Design view to add images and other style I want. What can I do to fix this?
Which is usually caused by elements in the code being out of order or nested inside each other by accident. Usually, the cause of an accidental drag and drop.
You have the page downloaded somewhere we can take a look?
If not, you can run the code through this validator: http://validator.w3.org/#validate-by-input
Who will notify if you any errors in your code.
-
TouchSmart 610-1010t: subwoofer not working is not in playback mode
I have an external box connected via the 3.5 mm jack on the back of my computer. After the upgrade to Windows 10, he stopped working with all the reading (itunes, videos online, windows media). It works, however, when I test the speaker in the interface of beats. The integrated speakers still work perfectly. I uninstalled the driver IDT and reinstalled, still nothing. All the drivers appear to be up-to-date. Any ideas?
Hello @Papakins,
Thanks for the quick response!
@Malygris1 is currently out of the office, so I'll take him. Have you tried installing the driver IDT using compatibility mode Windows 10, as indicated in the previous post? I understand that the external speakers work, when you use the interface of beats. Have you tried to restore the BIOS? You can use the following document can help you:
Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!
Have a great day!
-
IdeaPad U410 works do not in Normal Mode
Hello
My Lenovo Ideapad U410 has suddenly stopped working in normal mode. If I need to open a link or an important document, I open it in safe mode.
Has anyone in front of the same kind of problem? I don't want to format the system as it is first of all, I would like to know the root cause. The laptop is covered by a warranty but Ideapads isn't an international warramty I guess.
Any help would be appreciated.
Thank you
Akanksha
Unfortunately, it worked only for this instance and stop the system of frustration. Words with lenovo team... need to restore the system.
Thanks for your help!
-
Someone hit my monitor and broke. I connected a regular monitor, but will only work in safe mode. How can I disable the broken screen so that I can use my laptop?
Hi, try the normal mod F1, F4 or F5 Fn (function) button for the track changes and change the default monitor.
Safe mode, select monitors in Control Panel.
-
iMac does not enter sleep mode
Hello
My iMac will all of a sudden not more "standby". He worked for a long time without problem.
MAC OS: OS X El Capitan version 10.11.5.
MAC: iMac mid-2010 27 "
FileVault is turned on.
What I tried:
- Fix disk problems (first aid function)
- Discount to zero NVPRAM
- Reset the SMC
- The repaired disk permissions
- Restarted several times
- All updates are installed
- Update firmware (interface EFI)
Hypernation is set to the standard. Value = 0 (not changed)
Yes, it worked well with active FileVault. If this isn't the problem.
The computer will not be simple go to sleep or self according to setting Energy or actively by selecting mode 'sleep'.
In the console of the system log, I constantly see these errors when the iMac try to go to sleep:
06/18/2016 19.15.21,941 WindowServer [311]: device_generate_desktop_screenshot: authw 0x7f8ecc869c00 (2000), shield 0x7f8ecc0ab000 (2001)
06/18/2016 19.15.21,941 WindowServer [311]: device_generate_lock_screen_screenshot: authw 0x7f8ecc869c00 (2000) [0, 0, 0, 0] shield 0x7f8ecc0ab000 (2001), dev [2560,1440]
06/18/2016 19.15.22,068 WindowServer [311]: no sleep for WillPowerOffWithImages image
Especially the last of them worry. And there is no/private/var/vm files if it must be that.
Is there a simple and understandable way to solve this problem. Don't just suggest to just turn everything off as he worked and I did not change any settings.
I have the console of the system there is also a lot of errors/warning on Itunes if it could be linked to the issue:
18/06/2016 19.15.39,437 iTunes [738]: entry: _AMMuxedDeviceDisconnected, mux-device: 76
18/06/2016 19.15.39,437 iTunes [738]: entry: _AMMuxedDeviceDisconnected, mux-device: 71
18/06/2016 19.15.39,449 iTunes [738]: entry: __thr_AMMuxedDeviceDisconnected, mux-device: 76
18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - Mux ID not found in the mapping Dictionary
18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - handle cannot disconnect with invalid ecid
18/06/2016 19.15.39,450 iTunes [738]: entry: __thr_AMMuxedDeviceDisconnected, mux-device: 71
18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - Mux ID not found in the mapping Dictionary
18/06/2016 19.15.39,450 iTunes [738]: tid:45cbb - handle cannot disconnect with invalid ecid
18/06/2016 19.15.39,454 com.apple.xpc.launchd [1]: (com.apple.dpd [5986]) Service came out with abnormal code: 75
18/06/2016 19.15.39,000 kernel [0]: PM response has taken 100 ms (81, coreduetd)
This found ID of MUX is here for a long time.
Please launch the built-in activity monitor application and select the Select power tab
Discover ▹ all processes
in the menu bar, if it is not already selected. Also select
View columns ▹ ▹ prevention of sleep (or assertion of power)
Click on the header of the column preventing sleep to sort the table of process. A process which, if any, show Yes in this column?
-
HP Office Jet 8620: Do not print sleep mode
If I have not used my printer for a while, it goes into mode "Eve". When working on the computer and try to print something, I always get the message offline printer. I usually have to restart the printer and then the page will print. It is a common problem or is there a solution for this. According to HP and win 10, I have the latest drivers and software available.
Anyone else having these issues?
Gary
Printer is connected to the wall jack of th wireless to the computer, and the trickiness is approximately 1 foot away from the printer.
Gary
Maybe you are looking for
-
I have to disconnect from the iCloud on my new iPhone before wiping the old iPhone?
I have a new iPhone; He is running, but I want to clear my iPhone 4. I have you disconnect from iCloud on the self, or turn it off, before wiping the 4? My phone (s) is paired with an iPad 2. Thank you.
-
Satellite U200 - 1920x1080@64Hz on the external LCD screen resolution problem
I am the owner of a SATELLITE U200 and I would use it with an external LCD display. The external monitor supports up to 1920x1080@64Hz. When I select the 1920x1080@64Hz option in the properties of the screen, I get an image enlarged and out of range
-
Hello I had created an executable in LabVIEW 8.6 on a PC windows XP 32-bit. The application uses some screws of Vision. The executable is running in most of the PC except one. the PC is a windows 7 64 bit. I first got the error "Labview support 3 err
-
BlackBerry smartphone how to open each of the WAP and Push BROWSER files?
Ive got a yellow/orange world on the left side of my tray ive of blackberry curve 8900 on other threads/post and they seem to be saying that it is a message of push/WAP BROWSERS but have no idea where to read and delete!
-
BlackBerry Smartphones Wireless Sync problem
I have my system for wireless synchronization. It iw works very well for e-mails, but do not up-to-date contact in my address folder. Advice on how to remedy this situation? Thank you.