Apple TV constantly loses the connection to the remote

I have the latest version of Apple TV and remote control (touch screen version). The TV will say that he has lost the connection to the remote control, and then a second later he will say that he has restored the connection. This is repeated every 10 to 30 seconds.

It was before the last software update and still happens after him.

Sometimes even if the remote is fully charged.

It happens after restart of the Apple TV.

Any ideas on how to solve this problem?

Looks like interference to me, check your environment for other devices that may cause interference (babyphones, phones wireless, wifi, devices etc.)

Tags: Apple TV

Similar Questions

  • HP Photosmart 7525: printer constantly lose wireless connectivity

    I can't keep the connectivity on my HP Photosmart 7525. It worked fine for over a year, no change to my wireless network, all drivers updated on the printer. Help! What should I do next to fix this?

    Hi simiburtons,

    I'm glad to hear that you found a way to solve your problem. Feel free to visit the HP Support forum again if there are any issues that need attention.

    Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
  • lose the wi - fi connection. Help!

    Tecra M2 (Windows XP Prof) constantly loses the connection with a wi - fi built-in (g). The speed is slower, slower (48, 36... 1) and finally the connection breaks. Utility Intel States that the laptop "is out of reach" (actually 2 metres of access point). Once it arrives, the only thing I have to do is to disable and enable the connection. It will immediately with 54Bps again.

    Also inside the same room there is an old Tecra 8000 (Windows 2000) with PCMCIA card DWL-G650 + interrupt never, nor to slow down the speed of it. Does anyone know what the reason and how to survive?

    Hi gal

    Can you please tell me what wireless card you are using?

  • VPN constantly lose connection

    We have two RV082 routers and VPN set up between them (gateway-to-gateway).  Since the upgrade the firmware to 2.0.0.19 - tm (on both routers), it seems that most of the time that I have to disconnect and reconnect to the VPN connections for work again.  I made sure the 'Keep Alive' option is selected. What else could cause it to constantly lose its connection?

    Jesse

    Try to enable Netbios of dissemination of Advanced tab gateway-to-gateway functionality and aggressive mode.

  • Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

    Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

    WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

    Try the following steps please

    The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

    1. Check if the problem is related to a single device and if other devices connect normally-
    2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
    3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
    4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
    5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
    6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
    7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
    8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
    9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.
  • HP Office Jet Pro 8620: IMAC loses the connection to the printer

    Computer do not print and seems to lose the connection to the printer. I deleted all printers and made a new connection to the printer. Printer address 192.168.0.14.  IMAC later loses the connection to the printer again. I look at address on printer and now is 192.168.0.15. Its done this several times. So why the printer continue to change its address? Is it possible to put it permanently?

    Think I fixed it now. Problem was that I also had to set the Configuration of DNS address. Of course although computer knew the address of the printer, he could not find the server (i.e. the router) don't understand everything, but seems to work now.

    Went to the printer the webserver integrated with my Web browser. On the network, wireless 802.11, IPv4 configuration tab, I already had the manual IP, the subnet mask and the default gateway. I need to go to the next Section under the DNS Configuration, select "Manual DNS Server", then fill in the news for "Manual preferred DNS server".

    AllOf the above address were extracted from the information sheet, you can print directly from the front panel of the printer. My son who is more Apple savy than I am, said that he did not understand why I had to put an IP address manual for printer even when that she would have remained the same.  I don't either, but just know whenever IMAC my wife lost the connection to the printer IP address had changed.  My router is built with the Modem cable provided by the company. It is perhaps part of the problem.

    So no, it seems to be fixed number. So if you set a manual IP address, make sure that you also specify a "preferred DNS server"

    Thanks for your help

  • I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

    I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

    You have tried: If you can not connect to the iTunes Store - Apple Support ?

    And I tried to do a soft-reset/reboot the phone?

  • Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

    Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

    Yes, I'm doing exactly this with the same put in place.

    If the problem persists the next relative to the following articles might help you.

    Troubleshooting home sharing

  • Airport Extreme loses the connection to the home network

    I have an Airport Extreme (AE) with Cox Internet in my house. Version AE 7.6.7 since the end of may 2016, I lost WiFi connection radomly. I had a Cox technician out who finished just change a 'filter' in our neighborhood who feed on other Cox at the reception. He said this analog filter had to be upgraded to a digital filter.  Despite this, my WiFi kept down again. According to other Threads of the community, this problem was solved by putting the IPV6 in AE parameter for "link-local only.  I did this and still it is falling.

    According to a recent post in support of Cox:

    Most of the routers to retail, especially those produced in recent years, are completely compatible with IPv6. Cox has determined that the Apple AirPort Extreme routers, including Time Capsule models, may know Internet connectivity issues when running the firmware released before May 25, 2016. For more information, contact Apple Support.

    To a Moderator: Apple will have an AE update for this problem?

    The moderators of the forum are not questions on a user to user support forum, so don't expect a response from an Apple employee.  Please contact Apple Support directly if you wish to speak directly with Apple.

    Then, Apple has already released the new firmware... 7.6.7 May 25... so it's not the question that you reference in the statement on the website of Cox. Cox was referring to a firmware sooner, like 7.6.4, for example in their declaration.

    We have seen a number of messages from other users of Cox, who reported that the new firmware has resolved connection issues that existed before.

    To find out where the real problem may lie, I suggest that you connect a computer (with the wireless turned off) directly to one of the LAN ports <>- on AirPort Extreme for a few days and keep an eye on the connection.

    Post back your results. Then, we'll know if you have a general Internet... connection problem that could be a problem of modem... or a single wireless issue.  In all cases, it will help if you provide the model number of the AirPort Extreme you have... and... he make and model number of the modem you are using at the moment.

  • All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

    All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

    Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

  • Apple will never allow iPhone users to connect to their Apple TV via Bluetooth, and the remote app?

    I am frustrated because I know that the iPhone can connect to any Apple TV via Bluetooth to "auto set-up" but when it comes to linking in general, apple specifically denies this functionality to users.  I would use this feature because I use my AppleTV for travelI obtained and I would make a transfer to wi - Fi password. I can access Wi - Fi without needing to put distance with me.

    Download the Remote by Apple app on your phone.

  • 4 AppleTV lose the connection to iTunes shared whenever it shuts

    Apple TV 4 can't a reconnect my iTunes on Mac mini home shared. This happens every time after that Apple TV sleeps or turns off. He "sees" my iTunes library, but never managed to reconnect - gear wheel rotates just forever.

    The only way to solve what I've found is to reset Apple TV by unplugging the power cord. Once he raises the connection is immediate.

    Easier ways to deal with this problem?

    Mac software and ATV's to date.

    Loading and loading every time Apple TV turns off or sleeping...

  • 7520 HP loses the wireless connection. What can I do?

    I've seen lots of talk about HP products, loss of wireless connection.  I have the same problem with my 7520.  Initial Setup is perfect, but he began to lose the connection when it went into standby mode.  Someone at - it a solution?

    THERE IS A FAST SOLUTION!
    On April 18, 2014 (page 11 of this thread), I posted a quick solution. My HP7520 printer has worked on Netgear router WIFI 7550 flawless since then. I suggest you read this post.
    From long experience with HP, I found they have great hardware, but their software has always been dismal. The ultimate "fix" would be for HP address their failure of a software that allows to my difficulty in working.
    A single "tweak" in the router security settings wifi will do. The rest of settings changes other people have suggested are short lived (about an hour in most cases), while they don't be reconnected unless they restart everything. It makes sense because of what is happening.
    The single "twist" parameter should logically point HP programmers to where in the firmware, there is the problem. They listen to? And, really, it doesn't matter on all other settings printer and router. All mine are back to the default settings and it all still works very well.
    Go to a BBQ and stop wasting your time on this issue.
    Ken

  • Mac Mini loses the connection to the internal hard drive

    Hello

    I got in trouble once per day or almost one year that my Mini mac interrupts the communication with the hard drive. You can work away and all of a sudden all gel applications. Say, you happen to have a terminal open, if you try to execute commands in / sbin as stop or something like that, it is to say that you don't have access to the files with an error like this:

    bash: / sbin/shutdown: device not configured

    Finally the Terminal Server session freezes as well.

    I used the Apple Diagnostics for all the materials and it test verifies all very well. I bought and installed a copy of TechTools Pro (v8.0.3 build 1967) and he reported no problem whatsoever with everything. To be on the safe side, I replaced the memory, still no luck.

    I've lived a lot of system updates and none of them seem to have solved the problem. I am currently on OS X El Capitan v10.11.5 Beta (15F18c). Yes I know it's beta, but this problem before any release of El Capitan.

    The most reliable way to reduce the appearance of it during my work day is a reboot planned each night. For one reason or another, which reduces the frequency.

    I am at a loss on how to fix this and would appreciate any advice.

    Material is a Mac mini (end of 2012), the processor is an Intel Core i5 2.5 GHz, is now 16 GB 1600 MHz DDR3 memory, graphic is Intel HD Graphics 4000 1536 MB, storage is a 500.11 SATA GB Apple drive ST500LM012 HARD drive

    Thanks in advance.

    Maybe a bad connection tight to the HD. It could be the end of the water which connects to the system board. I had similar symptoms on my Mini 2012 and it is in this regard.  Like you if I stop and then after awhile restarted, it would be OK for a while.

    It could also be a problem with the HD

  • Satellite C660-28V - lose the internet connection

    I have two satellite C660-28V.

    Problem is that I lose the internet connection on a frequent basis. I have to reset the modem for internet connection back once again. This problem I have with these two laptops from Toshiba.

    I also own another laptop (Dell) and a local network connected PC: no problem with these.

    Have you noticed this problem with the modem connection only?
    LAN and WLAN connections work properly?

Maybe you are looking for