Apple TV Overscan/Underscan control

Similar Questions

• Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices with my Apple TV remote and SIRI HomeKit!

  Why is it not possible to use SIRI on my apple TV remote to control the HomeKit products? I should be able to control all the devices of HomeKit with my SIRI voice remote control and using Apple TV!

  If the new apple TV can act as a concentrator HomeKit and I use SIRI on my iPhone to control my locks, thermostat, lights, etc. Why am I not able to do the same thing with SIRI via voice commands on my Apple TV remote? When is this going to work?

  Also, when Apple will come out with a response to the echo of Amazon? I've tired to wait... do it already! If you build it, they will come...

  Thank you!

  This is a community to a user, and Apple will not see your rant. If you have suggestions about Apple TV, Siri and HomeKit the best thing to do is to submit your comments here. http://www.Apple.com/feedback/AppleTV.html

• Is it possible to set up an Apple TV Remote to control an iPad Pro?

  Hello

  I'm looking to put up an Apple TV remote be able click through a presentation of the iPad... Is there a way to define who, perhaps even to the control through an album in the Photos app? Or would I need to get the remote bluetooth?

  Keynote support remote Apple of a presentation.  The keynote app has the built in control.  You run keynote on two devices: love your phone and your ipad.

  The ipad does not support a generalized remote.  There are no remote access connection on the ipad.  Any departure is limited to applications that have generated the function in their application.

  R

• Unplug the apple TV apple tv 3 remote control 4

  Hello

  I hope that someone in the community can help me.

  I have 2 apple TVs in the House-3rd and 4th gen gen.

  They are in the same room. If I use the remote 4th gen, all right, the remote control is not to influence the old apple tv.

  But the reverse does not work. If I use the remote to control the Apple tv 3 3rd generation it also wakes ups the new apple tv too.

  How can I separate the systems? The remote gen 4 is very good but I need to disconnect the 3rd generation away from the apple tv 4

  Would this be possible? I tried the menu + left option of the remote control, but he did not like the apple TV4 does not react to this topic.

  Thank you very much.

  Kind regards

  Markus

  Follow this exactly, and your problem will be solved:

  Two Apple TV - remote controls works with both at the same time

• Apple tv overscan number 4th gen

  I can't configure my TV to be full screen with this 4th gen Apple TV. Very disappointed. My 3rd generation works fine, full-screen on my Sharp Aquos 1080pHD.

  My TV has no overscan or PC or setting to change the field of view.

  Is that going to be fixed in updates? Why I can't change the size of the screen with the apple tv? It is a joke that the 3rd generation has worked and now virtually part of my movies/TV shows is cut off due to overscan the apple tv is the creation...?

  Apple, please help, please give me some advice! You want to use this impressive technology in HD, with my HD TV! 1056 x 650, set HDMI to RGB no low... Only way to display the image full screen and everything will seem grainy and as I look at on a tube TV?

  Help!

  Post a picture of your sousdimensionne screen.

  What TV model number do you have?

  Describe the connection beween the ATV and the TV.

  The port on which you are using on the TV?

• Apple TV 4 remote control does not cool

  Recently the remote for my Apple TV 4 has begun to lose all its costs in the next few days after Plug and fully load. Previously lasted months between charges. It is still under warranty, so maybe my best bet is to arrange a call with the eventual replacement Apple support. Any other ideas on what I can do wrong?

  some the Microswitch is somehow broken or stuck because of something sticky that would activate the system constantly and the battery run out as fast as if you were pressing the button continuously

• No Volume control on the speaker Airplay of Apple TV app?

  Apple TV is set to the output on the AirPort Express.

  You can control the Volume of airport exit holding the Center button on the remote airport until the menu is displayed at the top, in selecting the speakers tab, scrolling to the airport, then using left/right button that moves the green light and makes the audio output to the optical connector upper or lower the airport.

  However the sound volume bar does not respond when you do exactly the same thing in the Apple TV iOS remote control application.

  Y at - it a trick to make react?

  Is this a bug or a coding error?

  Logically, the application should be able to control all the menus/submenus of the Apple TV.

  Apple TV output to a specified volume. The volume is controlled by your TV, speaker bar, amplifier, etc. Siri distance includes an IR remote, which can usually be trained to control the volume of the TV, but the iOS app can only output IR I don't have an airport, but probably it outputs to a volume determined in the same way, and you control the volume either at the level of the amp/speaker, or to the source if you play from iTunes.

  TT2

• Apple TV constantly loses the connection to the remote

  I have the latest version of Apple TV and remote control (touch screen version). The TV will say that he has lost the connection to the remote control, and then a second later he will say that he has restored the connection. This is repeated every 10 to 30 seconds.

  It was before the last software update and still happens after him.

  Sometimes even if the remote is fully charged.

  It happens after restart of the Apple TV.

  Any ideas on how to solve this problem?

  Looks like interference to me, check your environment for other devices that may cause interference (babyphones, phones wireless, wifi, devices etc.)

• Cannot change the volume control appleTV (4th generation)

  Hello. When I change the volume of my control the apple tv do not respond, I tried to change the hdmi and everythibg turned on and outside. I have also tried to change the settings of the tv and went to volume settings apple tv and custumething has changed several times, but it just does not work: / I just got the apple tv for like 1 day ago. Well, I hope you have understood my problem and have an answer for that. Thank you < 3

  Volume changes can be made by using the last Apple TV with Siri > control your TV or receiver with your Siri or Apple TV Remote - Support Apple Remote control

• shutters control home automation

  I want to renovate my metal, electric shutters.  at the present time, I have a button for opening and closing on the wall.  I am in a country of 220 volts.

  Does anyone know of a remotely controllable rehabilitation project (through it Mac?) switching system?

  Thank you.  (hope this is the right forum to post this)

  There are several different home automation standards.

  • Apple HomeKit - then that controlled by Apple is open for use by other manufacturers
  • Z - Wave - independent standard
  • ZigBee - mainly used to control the lights
  • ioHomeControl - rare
  • X 10-very old travels the power cables

  and then there are some owners including systems

  • Crestron
  • Control4
  • Samsung Smarthings
  • INSTEON

  which can be linked to various other products

  There is Mac software for some of them and iOS apps for most of them. From a perspective of Mac, take a look at https://www.indigodomo.com/

  But, you are probably better off watching iOS apps, you might even wall mount an iPad and use it as a controller. You could also use an open-source solution and control via a web browser, some people do with a Pi raspberry running Linux and equipped with a software module and Z-Wave as a OpenHAB race.

  I look at using Samsung Smartthings to control various other systems, Smartthings as standard can control Z-Wave and Zigbee devices. There are several controllers for wheelchairs/roller shutters using the Z-Wave standard, which means that you can use one of people with Smartthings. Also from Indigo supports both the Z-Wave he too could control a rolling Z-Wave/component.

  Note: Z-Wave uses radio frequencies different in the USA vs Europe so make sure you get the right products for your location.

• Connect Apple TV remote no longer

  I have the latest Apple TV and remote control - my remote is no longer connects to Apple TV - I have a plu money away and that connects but my most recent remote contact does not connect

  1. Have you tried reloading the remote control.
  2. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  3. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  4. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  5. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• I have an Apple TV 4th generation. He had since Christmas 2015. I love it! All of a sudden Siri left hear my orders. It shows in my TV screen, as it is to listen, but never hear my order.

  I have an Apple TV 4th generation. He had since Christmas 2015. I love it! All of a sudden Siri left hear my orders. It shows in my TV screen, as it is to listen, but never hear my order. Have tried all the tricks. Restart Apple TV, adjustments to settings etc... Nothing works. Just waiting to hear my order. The only other question that began at the same time, it is that the remote Siri now will control the volume on my TV. TV turns on and off with Apple TV, but volume control not responding. I now use the TV remote to adjust the volume.

  Please notify

  There is a problem with siri does not work when accessibility > zoom is enabled in the settings which I hope will be corrected in the next version, because now disable zoom works around this problem.

  I think that questions about the th volume control are a separate issue and possibly caused by something you did everything trying to solve the problem of siri. Have you checked the volume control settings are properly.

• Apple@eml.co.UK

  What is the actual email from Apple?

  He said...

  Dear customer,

  We just need to verify that this address belongs to you.

  Just click on the link below and sign in with your Apple ID and password.

  Check now > > >

  Ask yourself why you got this email?

  It is sent when someone adds or modifies a contact for an Apple ID account email address

  If you don't do this, don't worry. Your email address cannot be used as a contact address for a

  Apple ID without your control.

  [IMPORTANT] If this letter sent as junk e-mail or spam is just a mistake of our new system.

  Please click not spam or not junk. Frequently asked questions.

  Kind regards

  Apple

  Copyright © 2016 Apple Inc.. All rights reserved.

  < link published by host >

  It seems to be a phishing attempt. I would like to delete it.

• What encryption (if any) is used by Apple bluetooth Magic keyboard (MLA22LL/A) when communicating with MacBook Pro?

  I am considering buying magical Keyboard wireless Apple (MLA22LL/A). What (if any) encryption is used by this keyboard blue-tooth when it communicates with the Mac Book Pro?

  I have a Mac Book Pro running OS X El Capitan.

  The only real encryption it offers is the fact that it pairs with your computer based on a code that you see only on your computer.     There are some wireless keyboards with much more sophisticated cipher such as AES.   Interestingly enough Apple uses AES encryption for its images of which are encrypted disk utility.

  When you use a Windows keyboard, you won't get the same start strokes keyboard sequence, and the implementation of the Alt key and the windows are in reverse order of the Mac keyboard functionality.  Many start sequence shortcuts only work on the wired Apple compatible keyboards.   Logitech and compatible third-party Apple MacAlly keyboards.  Microsoft for its own keyboards makes a pilot who will the placement of the button Alt and Windows in the right order.

  ALT = key Option from Apple.

  Windows = control of Apple key.

• Why this upcoming Dungeon ' imranpatel699@yahoo. Co.UK "by identifying Apple app store, since the update to El Capitan, 10.11.04 version. I can't access my update of the app now?

  When I updated my El Capitan of the latest operating system updates for her 10.11.04. the following email ' [email protected]' comes up constantly in the apple id section. I enter my apple ID and password, but it does not allow me access and goes back to ' [email protected]'. I can access all my other apple products through my apple ID, but it does not work on my MacAir.

  I can so my MacAir is more up-to-date. I don't have this problem on my Mac Air when I connect to iTunes, it's only in-App store

  One else have this problem since update? and how do I get rid of it and have access to my App Store once more.

  Help, please

  You have installed at least one pirate app, initially from the Mac App Store. It contains the reception for a different application, downloaded by using an account that we can't control. You need to identify and remove the pirate app.

  Important: The application, you need to delete maybe not one mentioned in the Act of updating. For example, the App Store could you invite to update 'Angry Birds' or 'Twitter', but the pirate app could be "Final Cut Pro". Don't make assumptions about the app you're looking for. To find it, you must perform a systematic search with spotlight.

  1. Please triple - click anywhere in the line of text below on this page to select:

  kMDItemAppStoreHasReceipt=1

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  2. in the Finder, press Command-F to open a search window or select

  ▹ Find file

  in the menu bar. In the search window, select

  Search: This Mac

  from the line of chips below the toolbar. Below that is a context menu of the search criteria, type display. In this menu, select

  Other...

  A sheet will fall. In this sheet, select

  Raw request

  as a criterion, and then click OK or press return.

  Now, there will be a text box to the right of the search criteria menu. This is where you enter the raw request. Click in this box and paste the text you copied previously by pressing command + V.

  3. the search engine will display all the App Store products that are installed. Compare these results with the list of your purchases on the App Store. To see the full list, you may need to Show hidden purchases. If applications have been downloaded from the App Store using other Apple ID that you control, connect to the Bank in respect of each of these codes and check purchases.

  4. at least one of the applications in the Spotlight search results is not among your purchases in the App Store. Remove each such point.

  5. exit and relaunch the App Store. Test.

  If you find these confusing instructions, request another method.