Apple Watch can connect to the WiFi of my airport when it is set to 2.4 and 5 GHz?
Apple Watch can connect to my WiFi? When the iphone is out of reach of Apple Watch of bluetooth, Apple Watch goes WiFi that is connected to the iphone. The WiFi of Apple Watch is 2.4 GHz. My Airport is 2.4 GHz and 5 GHz. in case the Apple Watch connect?
Help here > Bluetooth and Wi-Fi on Apple Watch - Apple Support
Tags: Apple Watch
Similar Questions
-
Apple Watch stay connected to the iPhone 7
I unpaired my Apple Watch from my old iPhone reset 6, combined with my new iPhone 7. Since then, he continues to lose its connection, even if both devices are never spaced over 3 feet. It's killing the battery on the Apple Watch in the short term.
What is happening to others? Any suggestions on how to keep connected?
Hello
The following steps may help:
- Restart your iPhone and your watch, both turn off together, and then restart your iPhone first;
- Disable the pairing and pair your watch again:
- The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
- Cancel the twinning of your iPhone - Apple and Apple Watch Support
- Set up your Apple Watch - Apple Support
-
My smartphone and iPad have both work successfully on the wireless network, but my laptop (Dell Inspiron series n and Sony Vaio e series) does not display the network. The router * I use the modem is D-Link DSL-2750U. Computers that run windows 7 Home Basic. What should I do?
Hello
As you mentioned that you are able to connect the Smartphone / I Pad to the wireless router, but the laptop that is running Windows 7 does not connect to the router.
First of all, try to run the network troubleshooter to see if it can help diagnose and solve your problem:
See the provided article below for more information:
Why can't connect me to a network?
I also recommend that you go through the steps given by 'Kevin Hau ' April 24, 2010 in the link provided below.
Problem connecting Wireless Windows 7 - No. available wireless connections
See also:
Wireless and wired network problems
Hope the helps of information provided. We know the results.
-
IPhone does not connect to the WIFI in the House when not near router
This is a recent as problem it used to work fine.
My iphone connects to the WIFI in my house when I'm in the same room as the router but won't connect to nowhere elsewhere in the House.
Any other apple device I have works fine, so this would suggest that there is a problem with the phone?
Is it possible to fix this?
Thank you
If your iPhone is in a case, first thing I would try is to remove the case and see if that fixes it. Other that that, I can't imagine any easy fixes. This article may help:
Import photos and videos from your iPhone, iPad or iPod touch - Apple Support
My next step would be to take it to a nearby Apple store and see if they can diagnose and help you.
-
Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?
Two possibilities:
(1) your airport WiFi might have a network name that is not in line with best practices, wireless
A good wireless network name is...
... In short no more than 20 characters
Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.
Compact, without spaces in the name
For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.
Same guidelines your password
(2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band. Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.
-
My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.
Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...
-
I get a message on my watch "Device locked" Unlock iPhone to start using Apple Watch "so I have the odd from my iPhone, now I can't pair it again.
Hello
Follow these steps to clear your locked watch and re-pair it with your iPhone:
- Connect your watch to its charging cable - with power connected.
- Hold down the side button until you see the cursor off the power.
- Press firmly (IE more firmly than usual) on Power Off and then press erase content and settings.
- Then re-pair your watch by using the app shows on your iPhone, choose restore backup when the possibility.
More information:
Set up your Apple Watch - Apple Support
If you have forgotten the password for your Apple Watch - Apple Support
-
I can not pair my Apple Watch with my iphone 6 s so true the automatic procedure freezes the app on my iphone. If manually matching the 6 digit code will appear on the Apple Watch. I have the current ios 10.0.1
does anyone have a solution to this?
Hello
The following steps can help (try again after each):
- On your iPhone, in the application of the watch, go to: Watch My > general > use > software update - remove any file update, if one is displayed.
- Delete all profiles beta (on your iPhone and/or the watch), then restart both devices (this applies only if you have already participated in a program of Apple Beta software).
- Restart your iPhone and your watch:
- Close open applications on your iPhone:
- Double-click the Home button, and then drag upward on each Preview app to close.
- Close the two devices together, and then restart your iPhone first.
- Close open applications on your iPhone:
-
Apple Watch heart rate monitor, the signal can be shared with other devices such as the Garmin Edge 520?
Hello
No, that it is not currently possible.
-
The Apple Watch can be used as an alert entry during sleep?
My daughter has big crisis badly during his sleep. Would be the Apple Watch can alert via a change in his heart rate to let me know that she is having an epileptic seizure? Thank you.
Hello
The ability that you have described is not a feature of Apple Watch. Also note that the important safety information include:
"Apple Watch, heart rate sensor and Apple Watch apps included are not medical devices and are intended solely for purposes of fitness. They are not designed or intended to be used in the diagnosis of disease or other conditions, or to cure, mitigation, treatment or prevention of the disease. »
More information:
https://help.Apple.com/watch/#/apdcf2ff54e9
While keeping the foregoing in mind, you can follow the evolution of the SeizAlarm application. The developer States:
"Once Apple allows substantive monitoring of movement via the accelerometer in the Apple Watch itself, we will then add the ability to make detection through the watch that will be a much more accurate detection method."
More information:
https://iTunes.Apple.com/GB/app/seizalarm-seizure-detection/id978475280?Mt=8
-
Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!
Hello
Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
Method 2: Troubleshoot wired and wireless in Windows network connection problems
You can also post your question in the forum of Lenovo to get help:
-
Unable to connect to the wifi service in my house, how can this be repaired?
I have a dell laptop and I am trying to understand how to do this. I enter the key of the service network and the message says that the network password must be 40-140-bit according to your network. It can be entered as ascii characters 13-5 or 10-26 hexadecimal characters? How can this be repaired?
Hi Vickiloo06,
· Did you do changes on the computer before the show?
· What happens exactly when you try to connect to the wifi service, you receive error message?
I suggest you to consult the following Microsoft Knowledge Base article and check if it works.
Unable to connect to an access point wireless with Wi - Fi Protected Access update installed
http://support.Microsoft.com/kb/821442
How to troubleshoot wireless network connections in Windows XP Service Pack 2
http://support.Microsoft.com/kb/870702
I hope this helps.
-
I am not able to connect to the main wifi network but can connect to the network of comments.
Hello
This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.
The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...
Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.
Wait a minute
Turn on the modem first and leave a few minutes, he managed by itself
Turn on the next device that is connected to a modem and leaves turn a good minute
Keep turn on devices one by one at a time, one minute apart, until the entire network is back
Recheck the network and report on your results
-
My pro iPad connects to the WIFI, but loses connectivity to drops in use. My other IOS devices (iPhone, macbook, etc.) do not have this problem. Ideas to solve?
Hello BrooklynWM!
I definitely want my iPad to stay connected to the Wi - Fi connection while I use it. Thanks for posting that other iOS and OS X devices have no problem with the connectivity dropping. We can try a few things.
Would first go through the steps listed in this article: If your iPhone, iPad or iPod touch connects to a Wi-Fi - Apple Support Network
Then if it does not help, you can check network settings with this: recommended for the WiFi routers and access - points Apple supported
After trying those, if you still see the drop connectivity, make sure the iPad Pro is updated with iOS 9.3.2 and check to see if the connection when you are in a certain place, time, or one event happening elsewhere in the House.
Best regards.
-
iPhone connects to the wifi but does not connect to internet
I have an iPhone running iOS 9.3.2 6s (last updated).
The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.). If I disconnect WiFi and use the data, it works very well. We have no problem connecting to the computer or a smart TV network wifi and internet connection.
This also happens with my daughter 5s iPhone and iPad for my son.
Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.
We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500. Encryption is set to WPA (not WEP).
I tried to go into my phone settings and reset the network. Always problems.
It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '. And then to go on our data on our phone plan
Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.
(1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.
(2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.
(3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).
(4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4
(5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.
(6) determine if other wireless network devices work well (other iOS devices, Mac, PC).
(7) try the device on another network, i.e., neighbors, the public coffee house, etc.
(8) backup and restore the device using iTunes (ask for more details if you wish).
https://support.Apple.com/en-us/HT201252
(9) go to the Apple Store for the evaluation of the material.
Maybe you are looking for
-
zt1195 lights flashing No. start?
I just got a laptop zt1195 . The problem is when I plug all lights flash on and outside and continue to do so. I can't turn it on, it just flashes.If anyone can help me with this it would be much appreciated. If I don't work, it will make a nice work
-
In particular windows security updates for example updating security for windows vista (KB2378111) error code: 800719E4. With a lot more updates, they continue to fail, but only a couple succeed. When starting my computer in general goes to screen in
-
I have been using HP Pavilion g4 laptop 2049tx a year and a half. Recently, I have a problem with my laptop keyboard. The ARROW BUTTON to the BOTTOM of my laptom does not work. But sometimes without pressing the key, scroll to the bottom of function
-
Add timestamp in a column in an excel file
Hello I want to add the timestamp of the last column of my excel file are these my data columnA columnB column C ColonneD temp10 temp11 temp12 timestamp here is the name of the header 74.212 73.122 73.222 11:00: 23:59.012 73.444 73.223 74.322 11:00:
-
How to configure and use the fingerprint reader?
I have a Pavilion dv7 - 6157cl laptop with Windows 7 Home Premium 64-bit. A second person may also use the player? If this is not the case, the password feature can be used by someone else? I need a complete and detailed instruction for the finger