Apple Watch first Gen does not start

Similar Questions

• Apple Watch dictated either does not or tape a word at random

  all of a sudden Apple Watch message dictation does not work.  It creates only the audio and I get a message that the dictation has failed, or slap a word at random that I do not dictate.  Emoticons go through

  HI - try the following steps:

  On your iPhone, go to: settings > General > Siri - disable, pause for a few moments, and then reactivate the Siri.

  If it does not immediately help, restart both devices also subsequently. Turn on both devices power off, and then restart your iPhone first.

  -To turn off / restart your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.

  -When he is ready to go back, press and hold down the side button until you see the Apple logo.

• Apple MacBook Pro 2012 does not start

  2012 Apple MacBook Pro.  Does not start.  Just get the folder with the question mark.  gives possibility to restart with the ERD, but the model doesn't have a hard drive.

  Help the college student needs to access files on the hard drive for the finals.

  Thank you

  What happens when you start to recovery

  OS X: on OS X Recovery - Apple Support

  and repair/disk startup disk via disk utility which is located in the recovery of aid?

  If it is repairable so reinstall OS x, as the article says

  Also here is covered:

  On the screens, you see when you start your Mac - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Apple Watch unlock Mac does not

  I have a first generation of Apple Watch and a spring 2015 MacBook Pro, which I just installed Sierra. When I tried to enable to release the Mac with Apple Watch he didn't even after a number of tests, but eventually he agreed.

  Now, however, I believe that if I leave my MacBook for a few minutes and come back, it will say that the Apple Watch unlocks the Mac, the small waiting wheel goes around and around, but after maybe 8 or 9 seconds it drops just go back to the password entry screen. The net result is a considerable delay to return on the MacBook. After this happened a few times, I have disabled unlocking with the Apple Watch in the preferences.

  Any ideas why this happens? Normally, my iPhone is also nearby and the watch is associated with it - does make a difference?

  Do you have any Bluetooth device that is connected to your Mac? I had the same problems with the feature to unlock, then I noticed that the Bluetooth icon in the menu bar show he was matched (three points through the center of the symbol) even if I had nothing paired with my laptop. I open Bluetooth preferences and delete the two devices which are listed and which had been previously connected, but were not currently connected. After the removal of these items, the Bluetooth symbol returns to its normal look unpaired, and the release device started working 100%.

  I then tried to experiment a little. First of all, I have associated my Bose speakers. 100% failure, required my password every time. Then, I have not matched the speaker and paired with an Apple Magic mouse. This gave rise to a rate of 50% of failure but still worked when I clicked on cancel, then tried recording in. I have not tried any other devices or multiple as a mouse and a keyboard.

• Apple Watch Stand objective does not

  Sunday, September 17, 16, I've updated my Apple Watch (only a month) to the latest version. My goal of settlement worked very well on Saturday. It records now is no longer the time am I standing. I am a teacher and have been standing in my class since 09:00 this morning. About two hours of the judgment and it has not been saved. All the other goals in my application of activity are working perfect. Solutions or thoughts out there?

  Hello

  Try the following steps:

  • On your iPhone in the app shows, go to: Watch My > General > detection of wrist - make sure it's open.
  • On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness - is Fitness Tracking off.
  • Restart both devices in two turn off together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

  • Return to fitness tracking configuration and turn it back on.

• first 7 does not start

  Hello

  I got this number of times before, and it becomes quite annoying and this time not easily fixable. I try to start the application, but all that I have the chance to see is the window to get started for a few seconds and then nothing more, the program stops.

  In the past, the cause has proved to be a file corrupted (for most of the movie files) I had worked with before on the first, which means that they have been imported into the workspace.

  The question of setting is manually delete all files from the user from the HARD disk until I tried to start the program.

  This time, it does not work or I'm missing a file somewhere. Could someone give me please everywhere where I can delete files without spoiling the program itself?

  THX

  It is more likely that your license corrupted.

  Try this, fair questions to the right of this forum.

  http://forums.Adobe.com/thread/542377?TSTART=0

• Apple Watch and sound does not

  I think I resound hearing aids and using the latest app with more than IOhone 6s and Apple Watch.

  IT is located to imitate iPhone. However detect the updated iPhone software 9.3.1 I have to restart the phone and watch in order to make them work with the app to resound. I've never had to before this last update. Is anyone having this issue. Apple doesn't work with the accessibility issue well and needs to step it up.

  Apple and resound und is change for me but this must be a priority for Apple during the upgrade of software and to ensure that the watch is upgraded as well life. I have also uninstall the app to see the watch resound and reinstall every day to make it work.

  Help, please

  James

  Hi James

  Helps resolve problems with your third-party application, as a first step, it is best to contact the developer of the app:

  More information:

  http://www.resound.com/contact

  http://www.resound.com/hearing-aids/apps/control-app

  http://www.resound.com/SmartApp

• Apple TV third gen) does not not on iMac

  My third gen apple TV makes its appearance is more on airplay for my iMac since I've upgraded to El Capitan. They are on the same ethernet network and I did all the updates for both. I restarted the APPLETV and new but always unplugged/plugged in will not appear on the iMac. He is recognized on other computers on the same network if... What should I do?

  Called apple support and that was resolved by turning off both devices (iMac and Apple TV) unplug both Ethernet and leave for 1 min before connecting the two back and reconnecting to ethernet

• Adobe first pro does not start this code appears (0xc000001d)

  Help, please! I uninstalled and reinstalled this program that I really want to cancel this subscription

  Hi Reyes,

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• After that effects and tests first CC does not start

  I downloaded the trial CC version to see if the products are good. Im trying to buy a sony vegas or adobe. This error message keeps popping up on both applications. It seems that the two are the same error.

  

  The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

  Details: http://adobe.ly/1QqMMc6

  Let us know how things work after installing the update.

• First elements 11 does not start

  I bought a package of photoshop + elements first. Photoshop elements works fine, but

  First elements does not start after installation without errors.

  I tried to test the version and the registered version (w and w/o serialnumber)

  I tried double click on the link, the file orig., and administrator - nothing happens on the screen :-(

  I looked for the "FLEXnet" service... "it's 'sandrine' and started several times"LicenseRecovery109"(without the 0 of the starting point and w) before and after a reboot: nothing happens :-(

  I also tried installing without "windows defender": nothing happens :-(

  Using win8 64-bit on a intel core i3 with 8 GB of RAM

  Someone at - it ideas?

  The solution is absolutely and totally crazy:

  My login usual account was an admin account. Here, I tried to install photoshop elements and elements first.

  Photoshop elements worked very well - first elements could not be started.

  So I created a new admin account and changed my usual login on "standard," konto

  installed the program in the new admin account, set the property to "run as Administrator"

  and now I can start my usual account (standard) program by inserting the admin password.

• My MacBook does not start and fires after the Apple logo. I received this error via FirstAid detail in disk utility.

  Hi Apple/community,

  I need a help.

  What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?

  

  Any help will be greatly appreciated. Thank you!

  Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.

  Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support

  If it works, try to repair the disk with this command:

  fsck -fy

  (http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)

• My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  Is there another way to start the IPAD?

  Try the steps here:

  https://support.Apple.com/en-us/HT201412

• First HP: HP first does not start after upgrading firmware 20160414

  Hello world

  Yesterday, I tried to update the firmware of my first HP as the connectivity kit he advised. Now, the first does not start.  The only way I can get it to do something, is pressing the Symb key and reset at the back. It then enters the V16 recovery mode.

  I am able to download the firmware, but after that it just does not start.

  I have reinstalled the kit connection several times.

  I used the option "use the new method of update" in the connectivity kit. But it won't help. I tried to download older versions of firmware.

  I tried the factory reset options: A, F, key simmultaneously O and then with the reset on the back

  I tried the Apps, Esc, now.

  It just does not start.

  Any suggestions anyone?

  With sincere friendships.

  Sigurd

  Ziggy76 wrote:
  

  Hello world

  Yesterday, I tried to update the firmware of my first HP as the connectivity kit he advised. Now, the first does not start.  The only way I can get it to do something, is pressing the Symb key and reset at the back. It then enters the V16 recovery mode.

  ...................
  

  It just does not start.

  Any suggestions anyone?

  The suspect first IMO is win10. You are a brave man to make an update based on win10. Try to do this on a computer with 7 or 8.

  Some on this forum may say they made a correct update of the firmware with 10 victory.

  However, to win 10 is known to his problems with the drivers and the software which is not original ms or not correctly connected.

• Satellite L505 - 13 X - does not start on first use

  my laptop does not start the first time I turn and I put it several times it starts

  Hi oussama512,

  Can you explain this once again with the other words and more detailed?
  What exactly put you it starts?

  In the worst cases, this problem is hardware related and you need help from an ASP.