Apple Watch freezes during the race

I used my Apple Watch during a 21K run. I used the training software to monitor my heart rate during the race.

After the mark at halfway, the screen dimmed, and the screen froze. (stopped adding distance, and heart rate has been replaced by '-'.)

thinking that it was because of the excessive sweat on the sensors, I tried to wipe the back of the better watch that I have (which is not a lot considering everything that I had on me was wet). by pressing the digital Crown to return the screen to the face of the watch, but whenever I go to the app to drive he would show the same frozen screen.

It is only after a kilometer (about 7 minutes) made the response to training app and worked normally until the end of the race.

for the purposes of the workout on my Apple Watch concerns, I had only run 19,71 km instead of the 21 K who I actually ran.

question: How can I prevent this happening again?

Hello

As a first step, if you have not already done so, it can help to upgrade your iPhone and Apple Watch to the latest version of the software, from your iPhone:

It can also help to revive your watch:

Tags: Apple Watch

Similar Questions

  • Why Apple Watch cannot show the heart rate all implement open outdoor execution on?

    Why Apple Watch cannot show the heart rate all implement open outdoor execution on?

    Technical data has shown that he can do, but in fact can not?

    It is not good advertising. During the race I'm not for the convenience of drag any function. It is wet.

    This link should help you your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

  • Satellite A300 power suddenly goes out during the race for hours

    Dear users of the Forum,

    I am facing a strange problem in operation.
    My laptop Satellite A300 is suddenly down power during the race for hours.
    It is auto off not exactly. Not the way windows stop, is rather like strength to off (as when I press on & power button to stop force).

    This happens automatically, starting again, the screen saying "windows does not stop properly, start windows normally" is apperanig.

    I suspected virus infection, I tried full scan with nod 32, essential microsoft, kaspesky - 1 by 1 (previous uninstall and install the new), but all the antivirus intremediately scan stopped due to this power off.

    Watch movie also stopped in the Middle, attempted to convert the movie file format also was arrested several times because of this problem of automatic disconnection.

    I tried to run only on the power (remove battery) and got the same result.

    can anyone identify the problem? can you please give me the solution?

    smarjit1

    Hello

    I put t think it is s virus.
    En me it looks like overheating. Eventually the high internal temperature requires the laptop to close. This is done automatically to prevent the equipment from damage
    I'm not quite sure what could cause this exactly, but in most cases the dust inside the fans affects cooling performance and lead to a temperature higher than m.

    Higher temperatures could affect the RAM modules too, and perhaps that is the reason why some applications don't work properly.

    What to say; try to clean the cooling fans using a jet of compressed air and check out how the laptop would proceed

  • Apple Watch: can I receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please. Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... someone kn

    I can receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please.

    Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... anyone know why? Thanks to you all!

    Hello

    To change the language for a response on your watch: Press answer > firmly press the screen > press on choose language > select Spanish.

  • Apple Watch back in the range

    I would like to know if the Apple Watch returns in the range with the iPhone, is pushed and shown on the watch notification?

    Hello

    Non - Apple Watch does not provide a notification alert when it comes back within the range of the paired iPhone.

    However, while it is disconnected via Bluetooth, if the watch is also impossible to connect to a Wi - Fi network, known at that time, it will display the icon disconnected at the top of the face of the Watch:

    After the devices have reconnected automatically (after back to within reach of the other), this status icon no longer appears on the dial of the watch.

    More information:

    On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  • Satellite A100-233 - freezes during the update of the BIOS

    I have laptop Satellite A100-233 PSAA8E-05J02ETE and I tried setting up LAN and wireless driver, but I can't.
    Can someone give me drivers? I tried drivers from support for Toshiba that there not. This driver may not work lan - 20071009151457.zip

    OS: Windows XP Pro SP3

    And when I tried the BIOS update and load the new BIOS: ok
    Analyze the compatibility of old and new BIOS: ok
    Read old BIOSES: ok
    Save the old BIOS to the backup file: ok
    New Flash start cant BIOS and 1-2 min after the gel cell

    I solved.

    but really not funny...

    If you are using 233 A100 PSAA8E-05J02ETE model laptop, you must use A100-PSAA8A very funny pilot...

    Post edited by: jadefox

    Hello

    I think that in this case you must go to an authorized service provider. If the laptop freeze during the BIOS update module ROM needs to be reflashed.

    On the Toshiba site, you can search nearest ASP and download all the drivers. Check this box:
    http://EU.computers.Toshiba-Europe.com > support & downloads

    Welcome them

  • Apple removes all functions of the Apple watches sold in the UNITED Arab Emirates, as they do for Iphones and Ipads

    I am considering the purchase of an Apple Watch in the Dubai UAE UNITED. I bought an Ipad in Dubai and was horrified when I discovered that Facetime is disabled on all Apple devices sold in the UNITED Arab Emirates. I want to know is whether Apple are also turning off features Apple Watch som please the Government of the UNITED Arab Emirates?

    Hi, Rodolphe

    There are no regional differences for Apple Watch in hardware or software.

    The included USB adapter pins will be located in the country of purchase.

  • How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

    How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

    Here is the error

    Failure of deployment: Info: request shipment: install and launch
    Info: Action: install and launch
    News: Native debugging: on
    Info: File size: 219949
    Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
    Info: Treatment 219949 bytes
    actual_dname:
    actual_id:
    actual_version:
    result::failure 881 the application author does not match the author token of debugging

    The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

    If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

  • Compiling jsx to jsxbin, Palette disappears during the race

    Hello world

    My ID version is CS5, I added # targetengine "session."

    I compile jsx to jsxbin, but the palette disappears during the race.

    Anyone can tell me the reason?

    Thank you.

    Best regards

    Goldbridge

    You can wrap the content of jsxbin inside app.doScript () routine and add engine target in front of her.

    Hope that helps.

    --

    Marijan (tomaxxi)

    http://tomaxxi.com

  • Apple Watch waterproof to the water

    I must do something before I want to go swim with my series 2 Watch? Lock it?

    Hello

    Swimming workouts

    Begin a swim practice in the application of the workout on Apple Watch series 2 models automatically activates the lock of the water, which locks the screen to avoid accidental interactions during your workout.

    To complete your workout and to evacuate all the water:

    • Press the digital Crown and side button at the same time (which makes a break from the workout).
    • Turn the digital Crown, which opens the screen and erases all the water inside of the watch (it can make a sound).
    • Forehand and press end.

    Other swimming

    If you plan to get your Apple Watch series 2 wet in other circumstances that when training of swimming - as to the course of General wear in a pool - you can manually lock the screen first and then drain the water from the speaker subsequently:

    • Slide up from the bottom of the face of the watch to open Control Center > tap water from lock to lock the screen.
    • When you're done: turn the digital Crown to unlock the screen and drained the water from the speaker.
    • The lock can also be unexpected water activated and unlocked immediately after exposure to the water.

    After bathing, make sure to clean your Apple Watch series 2 by rinsing them with hot water from the tap. Watch and the band should be dried with a non abrasive and non fluffy cloth.

    Strips of leather and stainless steel (Milanese Loop and Bracelet links) are not water resistant, so should not be worn when swimming.

    More information:

    Work with your Apple Watch - Apple Support

    On the resistance to water Apple Watch - Apple Support

    https://help.Apple.com/watch/#/apd707b42a5e

  • Apple Watch hangs on the wrist

    Why my Apple Watch (42mm, series #FH of Sport * 9J6, 6.1 GB, Version 2.2.2 [13V604]) to lock up constantly when he is on my wrist, I have to re - enter the password several times. For this reason, I don't get notifications and heart rate is not taken. My Apple Watch is less than one year. I tried the clamping Strip and moving closer to the wristbone. I tried to put pressure on the back.

    I tried to disable the access code to the watch and it will not allow that. He says several times that I have to enter a new password.

    Help!

    < personal information under the direction of the host >

    Hello

    So that the wrist detection works correctly, it should certainly not necessary to wear your watch too tight. For best results of this and other features, on the back of your watch must be in contact with your skin. The right fit must be neither too tight nor too loose, with room for your skin to breathe:

    The sensor performance may be affected by the changes as some wrist tattoos permanent or temporary skin.

    Otherwise, the following steps may help:

    • Make sure the wrist detection is open: on your iPhone, in the application of the watch, go to: Watch My > General > detection of wrist.

    If the problem persists, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar in order to have your watch checked and, if necessary, repair under warranty:

  • Apple Watch to unlock the issue of the macbook

    Hello, I have a 2014 macbook pro community.  It is updated with latest OS, Apple Watch also updated.  I have 2 authentication enabled.

    When I go into the security of macbook it doesn't have the available for the Apple Watch box unlock.

    Any help would be great.  I followed all the instructions to do this, but there is no option (it isn't here.  It is not grayed out.  It's just not there.)

    Automatically unlock your Mac with your Apple Watch - Apple Support

  • Watch crashed during the update to look at iOS 3

    Just crashed and sent me to www.apple.com/help/watch

    Hello

    Try restarting your watch force: press and hold the two buttons for at least 10 seconds, until you see the Apple logo.

    If the problem persists, contact Apple technical support or make a Genius Bar reservation for assistance:

  • Purchase of Apple Watch asked if the new was in preparation for classes, they said they don't know, saw just a new watch is out! It's been 16 days... they will return?

    Just bought the Apple Watch 38 MM sport on August 24,2016, has seen a new version has been announced now, I want to Exchange my watch. Does anyone know if they will again Exchange?

    If purchased directly from Apple, their return policy is 14 days.

    If purchased more than Apple, you will be governed by the

    the retailer of return policy.

  • can I use Apple Watch bought in the United States in Australia

    My parents have decided to buy myself a Apple Watch in the USA when they go to spend the holidays in 2 weeks.

    I live in Australia, I'll be able to use it without any problem or do I have the Australian version?

    Will work. You will need at least an iPhone 5.

Maybe you are looking for