Apple Watch never free!

my Apple Watch battery is dead and I couldn't load it!

all I get is red symbol cable like the one in the photo, load

When it is connected to the charger it turned green, I kept it like that all night and nothing has changed (when connected green when disconnected red)

Keep in mind that I tried to reset it but I couldn't (by pressing the Crown and the side button for more than 10 seconds)

Have you tried to contact Apple or visit your Apple Store?

https://www.Apple.com/support/watch/contact/

Tags: Apple Watch

Similar Questions

  • How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

    How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

    Hello

    Apple has not yet announced the capacity of storage or the music of Apple Watch series 2 storage limit.

  • When I send a message or call a contact with my Apple Watch, what message or free call? or I am paying it with my mobile plan?

    When I send a message or call a contact with my Apple Watch, what message or free call? or I am paying it with my mobile plan?

    Apple Watch is just an extension of your iPhone.

    If you send a message or make a call, you would via the paired iPhone.   Just as if you had sent the message to the iPhone or telephoned him with the iPhone.

  • Apple Watch quick game launch, but never plays music

    I have a Apple Watch combined with an iPhone 6.  All software updates for watch OS and iOS are installed.  I also have an active subscription to Apple's music.

    When I type on Quick Play on the watch, he started but he never plays music.  I tap on the play symbol and it turns the pause symbol as it is to start playing, but it goes back to the symbol of game.  Also, when I press play on the watch symbol, I can see a tab for Quick Play pop up on the iPhone music app, but it disappears after a second.

    I tried the following, and no correction this problem:

    • Erase content and watch settings.
    • Reset the data synchronization on the watch.
    • Erase content and settings on the iPhone.
    • Synchronize the watch to another iPhone (5 s).

    I don't know if this is a problem with the watch or music on the iPhone app. I suspect it is a problem with the iOS App music since this problem occurs even when I paired my watch to my other iPhone.

    Everything else works like bat 1, my music and Playlists (I see that the watch as I have in the music library of iCloud).  This problem is only with Quick Play.

    I just bought the Apple Watch 2 days and I don't think what the exchanged will solve this problem since it seems to be a software problem.  I Googled that everywhere and I have not found an article or a discussion with the same problem that I am experiencing.  I have a ticket open with Apple Support and she was refitted to the genius, but I can hardly believe I'm first since Apple Watch is out for quite awhile.

    Does anyone have any ideas?  Thank you!

    I have the same problem with my iPhone since the latest iOS updates and watch OS 5. It worked fine before.

  • Apple Watch cannot be free icloud

    Recently, I sold my Apple Watch to a buyer. Before selling it, I already have a watch factory reset. When the buyer has received the watch, the watch cannot be enabled due to the blocking of the activation. I went on Icloud.com to remove the watch. However, the watch does not appear on my devices iCloud.com.

    Y at - it assistance to me?

    You will need to follow the instructions in this article to support:

    On the lock of Activation on Apple Watch - Apple Support

    Cancel you the twinning of the watch of the iPhone before you sell? If you cannot run the listed such instructions, the buyer will have to return to you if you can remove the lock of the Activation.

    Good luck

    GB

  • Can Apple Watch track a swim in an endless pool

    I work in an endless pool, which is actually a treadmill for swimmers. You will stay in one place and swim your heart while it blows a current against you to keep you in place in the small pool.

    I see that the watch can track laps, which is controlled by setting the distance of your pool so that he knows what is a length is, according to me. I also see that it can follow a free bath, and I guess it's GPS.

    No one knows if she can count the strokes? Or does anyone have an overview if you think it would work to track the swimming event in an endless pool where 1) don't stop and turn around each 'x' distance and 2) you also do not travel any distance to what a GPS is?

    Thanks in advance...

    N °

    Apple Watch uses GPS to track your progress in Open water swimming mode and titles towers during swimming in the pool swimming mode. The endless pool does not have to happen. As to count the strokes, I think it's (quite well know for that), but they do not report this information. Because they do not know to what extent you swim by race, they can use that to calculate your distance. However, I can see a future update where they have an Endless Pool mode when you enter the speed of the pool (assuming that you can set as a treadmill).

  • cannot sync iPhone to Apple Watch 7 playlist

    I had this problem, which occurs more often when you try to synchronize with my Apple Watch. I have paired with the iPhone and load time. The iphone connected to BT and WiFi. I select music in the Apple Watch app (I put it at a maximum of 2 GB of music) and then choose a playlist on my iPhone it is 520MB in size. Most of the time, the synchronization 'in the meantime' will appear and never progress beyond that. On rare occasions, it has synchronized music to the watch. When I try to update the playlist and syncing again, it often hangs on "sync in progress". He has also deleted from the playlist of the watch repeatedly, or said the synchronization is complete, but then only about 10% of the songs could be played on the watch and the rest was dark and couldn't access it. I tried unpairing and repair of the watch from the phone repeatedly. I hard rebooted time watch and phone repeatedly. I have improved the watch Watch BONES 1 to 2 to 3 without measurable change. I recently bought an iPhone 7 and Apple Watch 2 and find that exactly the same problem with completely different hardware.

    I see that others have problems similar, but not sure why it is so persistent through the operating systems and the modernization of the unit. I read Apple support on this issue and following all recommended procedures. Anyone had this problem and found a solution?

    I have the same problem with my iPhone 7 series Apple Watch 2. I can't sync the playlist with Apple Watch. It has synchronized some songs and the name of the playlist, but that's all. When I change or remove a few songs in the list, it says sync or waiting but no progress. The annoying part is the morning. After night, I leave my phone and watch the load, my phone is hot in the morning and another songs have not yet synchronized. I am in desperate need of this specification. I want to at least know is there something to do about it or we need to live with it?

  • Problem loading Apple Watch sport

    Hello everyone

    Since last week (after update watch OS) do not charge my Apple Watch sport

    more than a minute...

    After a minute, I get an error message saying that 'charge with. "

    This accessory is not supported"even I use the original White

    Magnetic charger and I've never had such an error before.

    I tried to disable the twinning and restart the watch it dosent help

    any suggestions?

    Thank you

    Hello

    Try charging your watch once again. In doing so, check that:

    • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

    • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
    • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
      • Some docks of watch, brackets, cases or protectors might hinder it. If you use one of these accessories, try to load the watch by plugging it directly into the charging cable, without using the.
    • If possible, test using a different Apple genuine magnetic Charging Cable (for example, by borrowing one from a friend).
    • If you reload your watch by plugging the cable into the socket:
      • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
      • Check that the USB power adapter is fully committed in the socket.
      • Try to use different maps of the following:
        • Adapter USB Apple that was provided with the watch, or;
        • A 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
        • A third-party certified 5W (MFi) Apple USB power adapter.
      • Try using a different take (one that is known to work properly).
    • If no other suitable adapters are available, try to load by plugging the cable into a USB port.
      • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).

    If you identify a problem with a particular component (adapter, cable, or watch) or the question otherwise persists, contact Apple support (mail service may be available) or make a Genius Bar reservation to have your products verified and, if recommended by Apple, served (either under warranty or through a service fee and out-of-warranty):

    To check your warranty status (the serial number is on the back of your watch):

    More information:

    Check your battery and load your Apple Watch - Apple Support

    If your Apple Watch does not load, or it lights - Apple supports

  • Can the Apple Watch of training app take "tricks" during your workout?

    The application of the workout on the Apple Watch can loosely last "tricks" during your workout?  Can you do you run?

    -Thanks!

    Hello

    To mark a segment (for example one lap) during running exercise using integrated workout app, you can double-click the screen. The display briefly shows the stats for this segment. Segments can be examined after training through the activity on the matched iPhone application:

    You can also find that a third-party application meets your needs. To learn about the characteristics of third-party applications, I suggest you consult the descriptions of app developers and their support resources. For example:

    If you don't find the specific information you're looking for, you can ask the developer directly. This is usually possible through their support resources (you may need to create a free account in order to be able to connect). They may also be open to feature requests.

  • App for Apple Watch series 2 allow the use of heart rate, gps, and manual splits?

    I run about 60 miles per week and I plan to change my Garmin Forerunner 620 for a series 2. However, it would be totally useless to me if the watch does not intermediaries, as many of my workouts are pretty accurate. So, is it possible for me to intermediaries on the watch, and when looking at the splits also see the GPS info and heart rate for the said stock split?

    Hello

    To mark a segment (for example one lap) during running exercise using integrated workout app, you can double-click the screen. The display briefly shows the stats for this segment. Segments can be examined after training through the activity on the matched iPhone application:

    You can see that an application of third party best suited to your needs.

    To learn about the characteristics of third-party applications, I suggest you consult the descriptions of app developers and their support resources. For example:

    If you don't find the specific information you're looking for, you can ask the developer directly. This is usually possible through their support resources (you may need to create a free account in order to be able to connect). They may also be open to feature requests.

  • Allow your Apple Watch unlock your Mac - box missing

    Hello

    Yes, all my devices running the latest OS - watchOS 3, iOS10, macOS Sierra (iPhone 7, iPad mini 4, MacBook Pro 12.1, Apple Watch) all signed the same iCloud, 2 authentication account activated - so everything according to the instructions.

    Interestingly, the box was causing it (under privacy and security on the Mac), it was when I had still activated authentication step 2, but once I disabled that & activated authentication factor 2 - the box disappeared and never came back.

    Yes, I disconnected icloud on Mac, & into the new.

    Off hand is also activated.

    I spent all morning on this, it is now, I want lessee a string of expletives.

    Can someone help me get this box?

    Thank you

    Jason

    I also had this problem. He was there at the beginning, and when I checked it, it gave me the error alert that I need to change 2 factor authentication. I did and then the box disappeared. I rebooted each device, etc... What worked was signing off iCloud desktop and then signing right back. Always a little nervous racking when you remove your contacts and calendars. But just make sure that you are supported, etc.

  • Apple Watch series 1 (38mm) - battery drain in airplane mode

    Hello

    I've had my Apple Watch series 1 (38mm), on Friday. So far, I really like and love what I can do with it. Never thought I would do so many things with it :-)

    However, I've lived a strange behavior... To save battery, I turned today into airplane Mode while I was at work. It was just in my coat in my locker. So I use it and it has not moved for 9 hours... I left in there with battery to 90%... when I'm out, he just got 50% left... This is way too much.

    Background refresh is disabled, I just installed 2 apps... also I just the icon weather stock on my dial of the watch. Not much in the dock or the other.

    Maybe it's a bug of software? Or is my watch may be defective?

    Restarted and will need to examine more closely, when its load to 100%.

    Anything else I can do for now?

    Hello

    It can help to restart your iPhone and your watch, close open applications on your iPhone first:

  • Apple Watch stay connected to the iPhone 7

    I unpaired my Apple Watch from my old iPhone reset 6, combined with my new iPhone 7. Since then, he continues to lose its connection, even if both devices are never spaced over 3 feet. It's killing the battery on the Apple Watch in the short term.

    What is happening to others? Any suggestions on how to keep connected?

    Hello

    The following steps may help:

  • App Apple Watch Timer is setting alarms

    I see a weird behavior with the OS3 timer app Watch: when the countdown is reached, I get the usual "done timer' screen with the bell sounds and the haptic feedback. I type the 'Stop' and stop the alerts. So far so good, but after 1 or 2 seconds, an alarm goes off saying "COUNT_DOWN_TIME_REACHED". Of course, I know that, I just rejected in the clock application so why also the notifications of alarms app? This never happened in OS1 and OS2. Is it supposed to be a 'novelty' for OS3? Is it possible to disable it?

    Restart your Apple Watch

    1. Hold down the side button until you see the cursor off the power.
    2. Drag the slider to turn off your device.
    3. Once your watch turns off, press and hold the side button again until you see the Apple logo.

    Then try the timer.

  • Apple Watch lights even if the load.

    I don't use my Apple Watch to indicate the time, when I get home from work at 3:30, it is 88%, never taken in the shower, and 07:00, it works always, usually, when I wake up at 7:00, it is 100% and runs to 49% at 23:59. Now, even if I just use it as I usually do, but it was broken, and I can't understand why it happened. I have AppleCare on the Apple Watch, but when I load it, it will appear the Apple Logo and I never really use my watch today, only to check on me, but I don't know that he died. It is only 5 months old. It is a black steel, had an edition as my first.

    It's also hot after I load it.

Maybe you are looking for

  • Tecra 730CDT - damaged BIOS

    During the upgrade of the BIOS, the power went out and the upgrade was interrupted. When the power came back and tried to start the computer, I get the message 'beautiful' that the BIOS has been corrupted and there is a record of maintenance. Please

  • Toshiba control buttons don't work no-Portege R200

    Hello Hi I formatted my Toshiba Portege R200 reinstalled Windows and drivers without the recovery disk. The problem is that after you have everything installed, I work the shortcut keys (Toshiba controls enabled in the control panel to assign functio

  • Impossible to update itunes due to lack of error.64.itunes?

    I tried twice (the two latest updates) to update my iTunes for Windows, but he says that error.64.itunes is missing? No I can not update, but when I plug my ipod iTunes automatically loads? Anyone know how to get around this please? I tried to do a '

  • IMAQdx.ctl

    Hi all I am trying to load a labview program that use the library version I made sure I have IMAQdx install with my version Yet when the execution is not workeable (broking arrow) as it does not find IMAQdx.dll I serch for it in c or labview folder a

  • have a pc with windows xp pro installed. can I reinstall the same cd?

    I've given nine pc with Genuine Windows XP Pro pre-installed.  I need to reinstall it. I have same as installed cd. Can I reinstall this cd?