Apple Watch not detected when I stand

Apple Watch not detected when I stand

Hello

Hourly settlement is achieved when you get up and move for at least a minute during this time.

Apple Watch uses an accelerometer to identify the movement, so market a minute of all about your arms swinging naturally succeed.

Repeat this procedure in each of the 12 hours separated throughout the day to reach the daily target of Stand (completing the blue ring to Stand on your application activity icon).

More information:

Use the activity on your Apple Watch - Apple Support

http://www.Apple.com/watch/health-and-fitness/

Tags: Apple Watch

Similar Questions

  • GPIB has not detected when connected to the internet

    Hello

    I have keysight power supply connected to the PXI-8880 via GPIB, it does not detect when it is connected to the internet & it was detected when its not connected. Any body can help me to solve this problem.

    Hello

    This problem occurs because of a conflict in present multiple network adapters in the system. It was a question that has used for detection of targets ethernet to the system that has been resolved. But then this question has also resolved to do the same thing. You can follow the link on how to change the order of the present network adapters in the system.

    http://digital.NI.com/public.nsf/allkb/FD9E1AF5AB1343098625736F0076DE6B

    You must also make sure that the IP addresses of the network adapters are different, otherwise conflict can happen also.

  • Companion of Xperia does not detect when I unlock my phone

    Companion of Xperia does not detect when I unlock my phone and keeps the dialog box "device is locked" even after that I unlocked the phone.

    I restarted the phone as well as killed processes all XC and rebooted too, but no difference.

    What's wrong?

    Overview running Xperia Z3 and Android N.

    OK, found a solution.

    Developer mode entered,

    Enabled USB debugging

    Again inspected the option 'Select USB Configuration' to 'PSG '.

    Now unlocked XC.

    Weird.

  • external device is not detected when you connect to a personal computer.

    Windows 7 pro, pen drive sound edition does not detect when you are connected.

    Yes sir its resolved, so that the new windows 7 pro, its pre disconnected installation mode. so that I can re active in what optins usb boot menu settings.

    Thanks to you all.

  • Apple Watch not work with iOS 10

    Hello

    I currently have an iPhone 6 more, will the iPhone Plus 7 Friday, but I decided to go and download iOS10 on my iPhone 6 Plus.  After that, I noticed that my Apple Watch was no longer in harmony with my iPhone.  I did several automatic reboots and ended up doing a factory reset.  After reset of my phone to the Apple Watch, I noticed that the watch is not reset.  So I reset the watch to the watch factory settings.  Now that he is back to zero, I can't pair it with my iPhone.  I even tried to do it manually and I have the same problem.  Does anyone have a solution for this or should I just wait my iPhone more 7 happens Friday?

    Hello

    When you pair your Apple Watch to your iPhone, make sure that you follow the steps detailed here, including the option to restore from backup if:

    Set up your Apple Watch - Apple Support

  • Apple Watch not advise with haptics during incoming calls

    Hi, my Apple Watch is not advising me with haptics for incoming calls. When I see the call on my phone and check my watch, I see appear on my Apple Watch face, but not with haptics the incoming call.

    I have the latest iOS on my iPhone 6 (9.3.4) and on my Apple Watch (2.2.2)

    Must be with the implementation in the application of Apple Watch, configure the options for the phone in the mirror?

    Hello

    It can help to use these settings:

    • On your iPhone, in the application of the watch, go to: My Watch (tab) > Notifications > phone:
      • Choose custom.
      • Allow everyone to view alerts, sounds and Haptic.
  • Haptic on Apple Watch not working

    Hi all.  So I have a problem with my Apple Watch which becomes quite frustrating.  The haptic feedback doesn't always work.  When I get text messages, it does not vibrate all the time.  The sound works 100% on the watch, but isn't the haptic feedback.  When I say, "does not vibrate all the time", I mean that I have to constantly manipulate the haptic feedback adjustment in the settings or forcefully bump/tap the day before for the haptic feedback work (as the engine does vibrates is stuck).  I'm pretty smart Apple then Yes, I adjusted the settings, unpaired, cleared, reset and also had it sent to Apple for repair.  Unfortunately, Apple technicians have not replicate my problem which is most frustrating.  On the Apple Store, the representative has not even tried to solve my problem and just told me that he would send my watch to get looked at.  Does anyone else have this problem?  I've just updated IOS to 9.3.4 on my iPhone 6 s more and that did not help either.

    Hello

    I suggest that you stick with Apple Support.

    Given the steps that you have already tried, the symptoms are indicative of a problem with your watch.

  • Why don't my Apple Watch telling me when I received a text when the Bluetooth?

    When my phone is on wifi and I wear my watch, my watch will make noise and show that I received a text as soon as I get one.

    However, when I got my phone and watch connected via bluetooth and I get a text message, nothing happens on my watch. Hear no notification nothing. But if I open the messages app on my watch, the new text will be there.

    Why can't I not made aware all the time on my watch when I get a text message? As isn't that kind of the gist of this watch in addition to reading time? It's really * me off.

    You will need to check your settings on the app shows. The watch will only receive notifications if the iPhone is locked. See this Apple Watch user's Guide information page. http://help.Apple.com/watch/#/apdb50fd440a

  • Will you be able to download nike + Apple Watch 2 series when it becomes available in October?

    I was wondering if the only difference between the two watches is only the version of the Nike + is delivered with the perforated Strip sport and preloaded with software Nike +? Two things that theoretically could be added to the series 2 shows at a later date.

    If I had to bet, I would say that you will be able to download the Nike + app to any Apple Watch, as well as the faces and other accouterments of software, but the group will be probably exclusive to the Nike + Watch version.

    That is, I doubt that the band will be sold stand alone.

  • Apple Watch not rejecting notifications do not phone

    MY Apple Watch worked properly since I got it. Since the update to 9.3 however notifications that I reject my watch will remain on my phone, sometimes just for a few minutes, sometimes longer, if they disappear at all.

    < published by host >

    Same problem here. I have iOS 9.3 and watch OS 2.2. I had the final beta for 9.3 and ran the previous watch OS and very well deleted notifications. Leading me to believe it's a bug watch OS 2.2. I tried to disconnect the watch and restore a backup and set up as a new watch, the two did not fix the problem.

  • P30: External hard drive is not detected when you use IEEE 1394 cable

    My P30 not / can not detect my newly acquired Western informed extreme Digitak Drive 320 when I connect via the firewire port. I use a 4-pin cable (which costs a fortune, by the way) who is supposed to be a way to connect this drive to a 6-pin pc.

    My ieee 1394 driver seems to be called 'VIA OHCI Compliant IEEE 1394 host controller".

    Can someone tell me what to do? I really need to connect the FireWire drive because I need the USBs for other devices.

    Thank you!

    Hi, Lars

    It is really strange. I use the external DVD drive (DL) using the same cable. I tested it with several units (old Satellite 1900, Tecra M1 and also new Qosmio G20) and everything works perfectly.

    Check the power supply to the external HARD drive.

  • How the Apple Watch manages activities when I switch the time zone?

    How the Apple Watch is managing the activities and objectives when I change the time zone?

    On a long distance flight with a time zone difference of nine hours, what would be the best time to switch to the time zone of the airport of destination, so that the objective of settlement can be completed, even if there is a shorter nine hour day?

    I did mine on the plane, he took no effect until he got a signal when we arrived at the airport. I guess you must ensure that your rings are made before you change the time zone.

    I found that you had to get all your exercises in the hours that were left in your day shortened to your destination.

  • Can the Apple Watch warn me when friends are nearby

    I thought I read somewhere that if your friend also had a Apple Watch and has been ranked in your friends on your watch, if you're nearby, you may receive an alert.

    Is this possible?  I tried to read how this could be done, but have not found something on this subject yet - or I'm not framing the right to the issue.

    I use Watch OS2 and of course, I have a friend who has a Apple Watch as well.

    Hello

    You can refer to find my friends, which is an app iPhone Notification alerts of this app on your iPhone can be mirrored to your watch.

    More information:

    https://iTunes.Apple.com/GB/app/find-my-friends/id466122094?Mt=8

  • Apple Watch no sound when decisions/receiving calls

    Can someone tell me please? It seems there will be no sound when decisions/receive call on my Apple Watch. I only got in October. Thank you

    Hello

    To adjust the speaker volume during phone calls on Apple Watch, turn the digital Crown while the call or press the symbols of volume on the screen.

    If it works as planned, it can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

    -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

    -To switch on: press and hold the side button until you see the Apple logo.

  • CD/DVD Rom drive - disk not detected when you try to play a movie or a cd.

    I tried everything in the book according to what the technical support guy me to HP.  Gave me a new optical drive.  I made the purchase and asked the guy.  How do I get the driver if it does not appear in my device manager?  He said just to install the new optical drive, and it will download automatically.  Yes, it was the most ridiculous thing.  He did his best to convince me.  Now, I received the new optical drive and even absurdity.  It won't work.  Try to get assistance and spend hours on the phone with them and no one can help me.  Wow.  Scam, scam, I don't really know what to call it.

    Hello

    Maybe it wasn't the drive first:

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for