Apple Watch OS 3 weather
When I touch the center of the watch of weather circle going up to 10 days instead of temperature or precipitation forecasting. Page 149 of the OS 3 Apple Watch guide said in pressing the Center brings you to the temperature or precipitation. Any fix for that?
Hello
Under watch OS 3, within the weather app, press firmly on the screen (not just typing) to toggle the display between Condition, rain and temperature.
Tags: Apple Watch
Similar Questions
-
Weather on Apple Watch is not accurate
When you use the complication of the weather on face Apple Watch, weather information for current location is incorrect:
Watch is set for the weather of the iPhone
iPhone is configured to the following cities in the following order:
-Current location
-San Francisco
-Phoenix
-Los Angeles
When in Phoenix, I noticed that weather on the watch displayed as 69 degrees (when it was 102 in reality). Check the watch app, I confirmed that it was configured as a "place of current residence.
Check the weather in San Francisco on the phone, shows that it was actually 69 degrees in SF. Seems to be the watch, even if the Setup program for the use of the current location, using the first real location entered manually (in this case, SF rather than place of current residence which is Phoenix).
Spend time to watch app on iPhone to current location in Phoenix, displays the correct weather. Looks like 'Current location' is ignored and the following location is displayed.
Hello
It can help to check these settings:
On your iPhone, go to: settings > privacy > location Services:
- Ensure that the location service is enabled.
- Sure Apple Watch is face value while it helps.
- Check the weather is set to always.
On your iPhone, go to: settings > general > background App update:
- Check that the bottom App Refresh is enabled.
- It can also help to activate the setting for the weather.
For optimal performance of your watch, also keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.
-
Place of current residence Apple Watch weather
Hi all
something is happening with my Apple Watch and weather.
I can't get the weather from the current location on my watch. current place of residence is enabled on my iPhone and I can't see properly on the native phone application.
However, I can't even on the watch. The current location is also enabled on the weather app of the watch, but I see only the predefined locations.
I read a bit here and I have tried all the solutions posted as to restart the phone, delete predefined places, etc. but nothing seems to work.
any idea?
Hello
The following steps may help:
- On your iPhone, go to: settings > privacy > location Services:
- Ensure that the location service is enabled.
- Sure Apple Watch is face value while it helps.
- Check the weather is set to always.
- On your iPhone, go to: settings > general > background App update:
- Check that the bottom App Refresh is enabled.
- It can also help to activate the setting for the weather.
- On your iPhone, go to: settings > privacy > location Services:
-
Problems with the weather of the place of Apple Watch
After you have installed 9.3.1 my watch keeps think its in New York but I live in Grosse Pointe, Michigan. Although it is the same time zone. I tried not matching the watch. This has happened before and UN-paird the watch. This time no matching done on correct. The Sunrise set function and the Sun does not work as well.
Salvation will be
Try the following steps:
On your iPhone, go to: settings > privacy > location Services:
- Ensure that the location service is enabled.
- Sure Apple Watch is face value while it helps.
- Check the weather is set to always.
On your iPhone, go to: settings > general > background App update:
- Check that the bottom App Refresh is enabled.
- It can also help to activate the setting for the weather.
Check that Bluetooth and Wi - Fi are turned on and that your watch is connected to your iPhone via Bluetooth:
- Phone: Settings > Bluetooth - on.
- Phone: Settings > Wi - Fi - on.
- Watch: when you view the time on your watch, slide up on the screen, then left / right for the look of settings > check that airplane Mode is not enabled and that your watch is connected to your iPhone.
-
How do you communicate with the Apple Watch
How do you communicate with the Apple Watch
Hello!
Welcome to the Apple community. I'm not quite sure what you mean when you say "communicate" with the Apple Watch, so I'll give you a few options that can respond to your request.
(1) the Apple Watch supports Siri, just like the iPhone and the Mac. To apply, simply say "Hey Siri" while the wrist is triggered, and your watch will respond. Alternatively, you can hold the digital Crown and Siri will be activated. As soon as Siri is activated, you can ask him questions such as "what is the weather today" or "reminder", or "Let's start a workout."
(2) you can manually send SMS via your Apple Watch by use of Siri, or opening the messaging app. That Siri send your messages, just say 'Hey Siri, send a text < name >' and Siri will open the Messages app and wait to talk to you about your message. If you want to move the Messages app manually, press the digital Crown and will take you to the home screen. In the home screen, select the Messages app (a green icon with a word inside bubble). Any existing message log must appear, and you can type on a given message log and choose to respond.
(3) If you want to place a phone call using your Apple Watch, you can say "Hey Siri, call < contact name >". If you have several numbers for a particular contact, Siri will ask you what number you want to call. You can also you can present a more specific request like 'Hey Siri, call < contact name >, < number >' with the number favorite is 'work' or 'House' or 'mobile' etc. So the demand go something like "Hey Siri, call Barbra, House".
If you are still at a loss, with regard to the types of orders that Siri will accept, you can always ask. Say 'Hey Siri, what can you do?' and she will give you a list of commands that she will answer to the.
If all goes well, I addressed your question. If not, please provide a little more information and I'll do what I can to help you.
Good luck!
-
Apple Watch series 1 (38mm) - battery drain in airplane mode
Hello
I've had my Apple Watch series 1 (38mm), on Friday. So far, I really like and love what I can do with it. Never thought I would do so many things with it :-)
However, I've lived a strange behavior... To save battery, I turned today into airplane Mode while I was at work. It was just in my coat in my locker. So I use it and it has not moved for 9 hours... I left in there with battery to 90%... when I'm out, he just got 50% left... This is way too much.
Background refresh is disabled, I just installed 2 apps... also I just the icon weather stock on my dial of the watch. Not much in the dock or the other.
Maybe it's a bug of software? Or is my watch may be defective?
Restarted and will need to examine more closely, when its load to 100%.
Anything else I can do for now?
Hello
It can help to restart your iPhone and your watch, close open applications on your iPhone first:
- On your iPhone, click twice on the Home button, and then drag upward on each Preview app to close.
- Close the two devices together, and then restart your iPhone first.
-
I am very disappointed that the new watch OS does not include a new Apple Watch face to include a greater time and date (see attached photo). I made this proposal months ago.
You see, I wear glasses to read, but I'm not all most of the time... when I drive, when I watch TV, etc...
When I look at my Apple Watch, I see the time but I can't read the weather and date, because they are just too small for me on my dial of the watch.
Please develop a new face of the watch that allow these fields to be more GRAND.
Thank you
François Croteau
Hi François
It is a community of support based on the user.
You can submit your request to Apple here:
-
I work on this issue and wanted to involve the community.
I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.
I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.
Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode
I'll copy in 2 portions of the Web site: http://help.apple.com/watch/
http://help.Apple.com/watch/#/apd0443fb403
If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):
- Send and receive digital messages Touch
- Send and receive messages using Messages
- Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
- Check current weather conditions
- Track your inventory
http://help.Apple.com/watch/#/apd2fe746e86
Make calls via Wi - Fi
If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.
To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.
Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.
Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.
Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.
Answer please if you are able to perform any of these functions! And any troubleshooting you can think!
AspiringAppleGuru wrote:
I have... to connect to the 5 GHz on my... router bandwidth.
Hello
These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.
If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).
More information:
-
Localixstion works only on Apple Watch after updating iOS 9.3.1
After the update to iOS 9.3.1 I notice that location no longer works on my Apple Watch.
I tried to restart my iPhone and Apple Watch without success...
Any suggestion?
I I updated yesterday and when I turned on it today it said I lived in NYC, but I live in Michigan. with the part weather do not know if it is the same, I had unpaired location and click on my home country I him have never had that. He also didn't tell me raise or a sunset over and my phone would not connect to wifi initially, I had to stop him and he repower
-
Hello
I'm not sure if I should post this in the article 'Watch' or 'IPhone '.
I bought a Apple Watch a few days ago. the first day I got it, it seemed fine (although most of the night was to load/update) until the next day.
I clicked on 'Watch' on my IPhone and it loads to the top of the screen with all my settings.
If I then click on 'Explorer', 'Star' or 'Search' I just get a blank white screen and nothing is still trying to load.
This happened the first day of its use after charging.
I then go to the chat support on apple's site and went through a load of things that does not work then they asked me to reset my settings (which proved do nothing except average I have to redo my fingerprints and passwords)
After the completion of this had not helped, and the app store still didn't work they put in place a phone call from one of them to talk to me through what was going on and ultimately a restore has been proposed.
I did a restore of a backup that I had done the day before and everything was back to normal and the AppStore watch worked again.
He worked all day yesterday and then today when Ive woken up, I click on the 'round', all my settings are there as usual. Click on "Explore / Search ' and it's just a blank white screen again and no loading.
The Watch works fine
My phone works fine
everything seems to work very well outside the App Store on 'Watch', but surely something is wrong somehwhere to get there. don't know if it is a lack of monitoring or by phone, but something does not work
Someone already had this problem or have any suggestions to what it could be.
I really don't like my phone again for him to stop working again after a day of compensation
Thanks for any help
Hello
To clarify: the expected behavior for the 'Search' tab is to show a white screen with a search bar at top. Only the content will be displayed during the search. For example:
-Start typing "Weather" or a known application (for example ' Dark Sky') name in the search box > the page must fill out a list of names app > press on see more details.
-
How can I change the time app is used on my Apple Watch face
The weather app available on my Apple Watch (watch OS 2.1) face is "The Weather Channel" app.
Is it possible to use an application of different weather on my watch?
I tried customizing of basis for the dial of the watch, but it seems not to allow change app WHICH is used.
Hi Dave
To choose what applications are included / excluded when customizing your face of the watch to available complications:
-On your iPhone, in the application of Eve, go to: Watch My > Complications.
(There is no need to add the weather app integrated with the list here, because it is not a third-party application).
-
How can I add an existing application from my phone to my Apple Watch?
I would like to add an existing application from my phone to my Apple Watch. Is this possible?
Hello
Apple Watch can install applications that State "offers Apple Watch app for iPhone" in their descriptions in iTunes and the App Store.
See, for example, dark sky information:
- https://itunes.apple.com/gb/app/dark-sky-hyperlocal-weather/id517329357?mt=8
To see which applications already installed on your iPhone can also be installed on your watch:
-On your iPhone, in the application of Eve, go to: My Watch (tab) > scroll down to see the list of apps > for everything that you want to add to your watch, press the name of the application, and then enable the setting for "Show App on Apple Watch" > allow a few moments for the application to install.
-
Apple Watch activity is not in the cloud?
So, I've been using a Apple Watch for a while and my number one problem is that 'Activity', I put together for the last year is not sync with the iCloud, so when I upgraded my iPhone 6 to iOS10 all my activity watch is gone. I tested this point last week and it seems that "Activity" app does not synchronize your data in the cloud, so if you lose your phone or your watch you will have to start all over again and latest data are lost. This seems to be a huge concern when I spend all this time my overall follow-up and progress. Everyone see what happens if you put to level or restart/reset your watch or your phone?
Hello
Health and historical activity data is stored on your iPhone. It is not recorded separately in iCloud.
To guard against data loss, be sure to make regular backups of your iPhone.
If the backup via iTunes, make sure to select the option to encrypt iPhone backup (unencrypted backup excludes the sensitive data, including health and activity). iCloud backups are encrypted as standard.
More information:
The backup of your iPhone, iPad and iPod touch - Apple Support
-
Cannot delete playlist Apple Watch
I want to delete my playlist of Apple Watch, so I can synchronize another list. Select None for music synchronized and then place the watch on the charger does not remove the playlist. What can I do to get rid of the playlist?
Hello
To change tracks in sync, follow the normal procedure for synchronization of a reading list, but this time choose the playlist you want to add:
-
Apple Watch (1st version) flashing background image
I have a first generation of Apple Watch. I recently did the upgrade to the new operating system for watches. I have a picture as my background. Since the update, when I turn my wrist to me, to "turn on" the face of the watch, it a little 'flash' thing she had ever done before. It's a quick way, irruption of the image of the picture on my watch that then remains on the image. Has anyone else seen/noticed does this?
Hello
The following steps may help:
- Close the watch application, and then restart your iPhone and your watch:
- To close the application shows on your iPhone, click twice on the Home button, and then drag upward on Watch app preview.
- Close the two devices together, and then restart your iPhone first.
- Disable the twinning and re - pair your watch:
- The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
- Cancel the twinning of your iPhone - Apple and Apple Watch Support
- Set up your Apple Watch - Apple Support
- Close the watch application, and then restart your iPhone and your watch:
Maybe you are looking for
-
Dear All/Admin/Tech,After the upgrade to Firefox 10.0 staff of my company in Indonesia can not rained access gateway SSL for the web of our company and therefore cannot log on to our web database program. In my tests, in Singapore (with the same ISP
-
Tecra Z50 - need to connect two external monitors
I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors. Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)? * Hi-speed III Port Replicator is not a
-
text of the report based on the results of the tests
I would like to include debug information in the report of TestStand. For example, if the test fails, report text = "try to replace C1." Is there a single expression that would cover all types of tests? I use TestStand 3.5. Thank you.
-
Beats Audio Control Panel and HP Recovery Manager missing
Hey there! I recently bought a HP Pavilion dv4-5a02tx and I have deleted the IDT audio drivers. However, when I rebooted my laptop, beats audio and HP Recovery Manager Control Panel was missing! The product number is B8M77PA #AB2 and the laptop runs
-
Exercise of fire or other emergency on call center problems
Hello, we recently had several fire drills in our new building where we had to evacuate all personnel who left open phone lines and non-staff, so all incoming calls would be sent to agents (if they have not remember to disconnect from their CAD progr