AppleTV will connect to a specific mac only

Similar Questions

• Photosmart 7510 will connect is the network (mac) wireless

  Although already our Photosmart 7510 used to connect wirelessly to the network, it arrested recently, without a known cause. I've updated all the software. It is said on the printer that is connected to the network and print via usb cable but the computer says that it is not connected (or on any other laptops 3 mac at the office also connected to the network).

  As I said, I've tried updating all software and have tried to delete the printer via reset printing system by following the instructions on a previous post. However I now can't add the printer as was then ordered.

  The software used is

  Mac OS X Lion 10.7.5

  Any help would be great, printing via USB is such a pain!

  Thank you

  Hello

  Try unplugging your router to power for 30 seconds, plug it back in and look for any change.

  Also, try power cycling the printer.

  If it persists, reset the network settings and reconnect it to your network, you can find steps planned in steps 3 and 4 below:

  http://support.HP.com/us-en/document/c02948582

  So, you can try to reset the printing system and check to see if that can help you:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Try to add the printer by clicking on the sign more and check any change.

  If none of the steps above does not help, have you changed anything lately? a new router, etc.

• my hp deskjet 3050 will not connect with my apple mac

  My HP deskjet 3050 will only work connected to my Apple Mac, it should work wireless

  Hello Cerges

  You receive any type of error? Try the following article and let me know if you encounter any problems.

  Mac OS x: install the product software for a network connection Wireless (via an Access Point)

  Also, what is the model of your printer?

  How can I find my model number?

• Is it enough for connection through SSH-2 RSA only, 1024, force 8 password?

  Hello world

  I provide the highest level of security on C2821-CCME-VSEC/K9.   Is it sufficient for connection through SSH-2 RSA only, 1024, force password: 8 symbols, no. CAPS letters, numbers, special symbols, example of password [homeless ^ & * 89]?

  line vty 0 4

  exec-timeout 60 0

  entry ssh transport

  line vty 5 15

  entry ssh transport

  I should create MAC based Access-List on cisco router?

  Should I use connection with higher security level options: SSH-2 RSA only, 2048, force password: XX symbols, CAPS and small letters, numbers, special symbols, example of password [homeless ^ & * 89Ad @[email protected]/ * / & #]?

  It's paranoia that has nothing to do with real life, or is a recommended practice?

  Please, advice.  Thank you very much.

  for extra protection

  I do it

  access-list 23 allow any newspaper

  line vty 0 4

  access-class 23 in

  line vty 5 15

  access-class 23 in

  Journal connection failure

  Connection on the success journal

  This will be syslog all connection attempts

  Archives

  The config log

  Enable logging

  hidekeys

  This will be syslog all comands

  
  

  SSH itself can be easily decoded when the man in the middle attack

• When connecting two books of Mac with Migration Wizard using a cable Ethernet 'right' or 'twisted '?

  Hello

  Soon I'll have a new Mac Book Pro, and I would try Migration Wizard but > > > > when connecting two books of Mac with Migration Wizard should I use a cable Ethernet 'right' or 'twisted '?

  You can use either; There is no advantage to one or the other specific.

  (144276)

• Cannot connect to a specific Web site

  For the last two weeks, I am unable to connect to a specific website (sharks.nhl.com). The user name and the password seem to go through fine (when I give a wrong password I get an error on the site), but the situation changes not connected.

  This problem exists on my desktop Linux and work only with Firefox. On my macbook/Firefox 30.0 it works very well on my windows laptop with IE 10 it works fine, on the same Linux with Chrome last he also works very well.

  However, it does not work with Firefox for Canonical Ubuntu and Firefox binary downloaded from the mozilla web site. I deleted cookies and other things and there is still no progress. The macbook Firefox and Linux firefox sync via Firefox Sync, for sets of modules are identical.

  This problem may be caused by corrupted cookies or cookies that are blocked.

  • Check the permissions on the subject: permissions page and in "tools > Page Info > Permissions.

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Edit > Preferences > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Edit > Preferences > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• Equium M50 connect to the WLan router only when security is disabled

  MY Equium M50 will connect to my ROUTER BELKIN g only MIMO when security is disabled.

  What is the reason for this please?

  Blonde bimbo!

  Hello

  Did you mean WiFi encryption that blocks the entrance to the local wireless network?
  I suppose that you have set the encryption (WPA, WEP, etc...) on your router WLan but didn't configure the wireless network adapter.

  Well, in my opinion, you should check out what WLan encryption makes the card holder and then choose it on the WLan router. The encryption key must be set to the router and the laptop!

• want dv6-7214 will connect without Wireless - N, even with the replacement of the wifi card.

  Two routers, linksys e3000 and dlink dap1522, both running only thread-802 n wap2 personal

  (also fails with encryption disabled)

  HP dv6-7214 will connect or wireless-N.

  Other wireless-n devices all connected, like the samsung galaxy, sony viao vista.

  Dialog Configuration-protected connection recognizes WPS-Wireless wifi connect info, but still fails.

  Disable bluetooth, no effect.

  Diagnostic HP online support a wireless card problem, sent a replacement wireless card.

  Not installed, no improvement. Same behavior.

  Two dv6 wireless cards will connect two routers if G 802 eneables. Blutooth also works.

  All hp and windows updates installed (before all this and checked again after the new card installed).

  System always runs from as main player c. HP 750 g drive msata ssd drive as 2nd.

  (but probably not relevant,?)

  System for 2 weeks, just the windows 8 and a couple of installed items.

  Wireless-N has never worked, it not connected Wireless-g. G always work N never works.

  It works for EVERYONE on the Envy DV6-7000 series with windows 8?

  Windows 8 makes * beep * almost impossible to see how an adapter connects.

  You must go to the file Explorer, network properties, click the wi - fi connection,

  and look at the speed of connection. If its 54 Mbps, its G connection protocol.

  You can also configure the router on one N, see if it can connect to all.

  I just two bad wireless cards in a row, or am I missing something?

  Provided with the wi - fi - model Ralink RT3290 card?

  Thank you for posting if you are sure that you can connect dv6 win8 wireless-N, I would like to know

  If it still works.

  Thanks for your time.

  First of all, thank you for the Nice fellow who took the time to answer.

  After several hours with HP support, we have reloaded windows as a last resort.

  This fixed the problem of wireless-N with the ralink wireless card.

  I have created the restore point, applied updates (windows update) via the hp support assistant.

  Eventially has all the recommended updates and ended with several update option.

  Make a restore point

  Load the update of Microsoft as an option for ralink (975 k no id #), he again DEFEATED Wireless-n.

  Thank you MesS!

  Once loaded, it shows in the history of the update, but has no way to uninstall it.

  Also, no way to uninstall from the Programs window.

  Fortunately, I had a restore point.

  ===

  MS Forum:

  Try this driver from hp support.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-113862-1
  I have the same problem after recent Windows Update the Ralink driver. The drivers of hp seems to work very well.

  If you're stuck with this issue and do not want to wipe your drive and reload windows,

  You can try the above driver or the driver suggested in the other response.

  I don't know how to remove the fake ralink against MS update.

• Desktop connects to the local wifi only, when the netbook to connect to internet

  Hello. My netbook and phone connect to wireless internet, no problem with my wifi network. And until recently my desktop computer connected ok too, using a usb adapter. However, I now have a problem. my pc connects to the wireless network, but only locally. Can anyone help please? There must be a setting that I or someone has changed?

  Hello

  You did changes to the computer before the show?

  Method 1: I suggest you temporarily disable the antivirus software or firewall and check if it helps:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Warning: turn off Windows Firewall/antivirus can make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Method 2: reset the default router and check if this solves the problem:

  Next to the electric power plug, there is a pinhole reset button. Remove all the cables from your router except the power cord. Press reset button with a PIN for 10 seconds. Wait 10 seconds then unplug the router. Router will be at default values, reinstall using the software that came with the router. You may need to reinstall the software of NIC as well. Then write your password on a piece of tape and stick it to your router.

  Method 3: Try the steps in the link and see if it helps:

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Reference: Wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 4: Try the steps from the link and see if it makes a difference:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based computer that has multiple network cards

  http://support.Microsoft.com/kb/947041

• I can't connect to a specific Web site

  My PC is running w7 Pro x 64 and IE9.  I'm unable to connect to a specific Web site for which I have a valid user id (my email address) and password (for me at the time to register for the Web site). When I try to login, I get a message saying the user name or password is incorrect, a second try results in a message that says that either my username and my password is not recognized - it displays also exactly what I typed so I can see my errors. The user name is correct, but the password it displys is not what I came - he says it is so kxEXkaTT that I had entered the correct password kxEXk1T0, the owner of the site says that they have logged on successfully with my user name and password without any problem at all. I tried to connect from my wife PC and PC friends and have had a complete success. All my different passwords with most of the websites that I use have different similar cases and alpha characters and digital and none of them asked me no problem

  Other facts are that I was a regular user of this Web site for 3 years without problem until all the time, I upgraded from IE8 to IE9. The site says that they have thousands of registered members, as I am and have not experienced the problem that I have. I also have my PC protected by major software anti virus check and online protection against viruses and malware. and to my knowledge I don't have a virus problem more than 12 years of using a PC. I always check my incoming emails to the ISP server level and delete everything I do not feel safe on before I have to download the rest on my PC. I also only access sites deemed most is serious busdiness, media, and Government don't respect - no games, etc.

  I suspect that I have a few curruption of memory possible in the bowels of IE9, but am worried that I won't lose all my existing data, updates and the settings (as Favorites) if I remove and reinstall from the original CD IE9

  Any thoughts on what I should do would be appreciated. Thanks in advance, Arthur

  Open ie9,

  Hold down the ALT key and type these letters to

  You can also use Ctrl + Shift + Delete

  Delete your browser history / delete button,.

  Check all of the boxes,

  Clear the check box of the very high.

  Click on delete.

  Close and open a new window.

  If still no joy.

  Reset ie9 Mr. Fixit for me,

  Check the delete personal settings when prompted.

  http://support.Microsoft.com/kb/923737

  Click the Start button in the taskbar.

  Click on Control Panel,

  Click on Internet options,

  Go to the Advanced section,

  Click on the Reset button on the bottom,

  Check the delete personal settings.

  Use the recommended configuration and installation options.

• my creative cloud won't let me log in to my mac only. PC, Yes.

  my creative cloud won't let me log in to my mac only. PC, Yes.

  If there is no entry of Adobe, follow the procedure below:

  N ° 1)

  1) click on the Finder and search options listed next to icon located Apple in the upper left of the screen and click on the "Go" menu button and select 'utilities '.

  (Applications > Utiliites)

  Look for a CC Adobe and Adobe Application Manager folder under utility window and trash both folders.

  Step 2)

  Trash Adobe Creative cloud from Applications Eh well.

  Step 3)

  (1) right-click on the icon in the Finder, then select the option "Go-ToFolder .

  (2) you will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)

  ~/Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater and OOBE.

  Step 4)

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.

  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  (3) then navigate to Application Support > Adobe.

  Open file Adobe and trash folders named AAMUpdater ,Adobe Application Manager and OOBE.

  Step 5)

  Click on the link below and download & run the cleaning of Adobe tool:

  Select the option "Adobe Application Manager for Mac OS X 10.6" and click on ""clean Selected " ."

  https://helpx.Adobe.com/content/help/en/Creative-Suite/KB/CS5-cleaner-tool-installation-PR oblems/_jcr_content/hand-Sea/accordion_container_1/accordion-nominal/accordion-point-1/agreement I on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip

  Step 6)

  Click on the link below and download the creative Cloud configuration file and use it to install the creative Cloud Desktop application.

  https://creative.Adobe.com/products/creative-cloud

• Adobe Photoshop CS6 will not install on my Mac.

  Adobe Photoshop CS6 will not install on my Mac. Adobe Application Manager is to see the beta version of Photoshop CS6 on my machine.

  I have uninstalled/removed all previous versions of the software and the Adobe Creative Suite Cleaner tool used to rinse my machines. Unfortunately,.

  I always get the following error message:

  Failed the Installation Photoshop cs6

  A beta version of this product exists on the computer. Exit and uninstall this version before continuing.

  

  I have uninstalled/removed all previous versions of the software and the Adobe Creative Suite Cleaner tool used to rinse my machines. I'm stuck now!

  Any help would be appreciated.

  See you soon,.

  Richard

  It's the statement to remove PS CS6 beta

  http://forums.Adobe.com/message/4361731

  It is strange that you have run the cleanup tool and that it did not always work

  You can try to connect to the Root user account and then run the cleanup tool and then check.

• IPad connects to Itunes on Mac

  IPad2 works very slowly.  Is advisable to back up and restore via Itunes on Mac.

  After erasing everything that I reloaded the software on the Ipad, but it doesn't connect to Itunes on Mac.

  He returns with "iPad 'IPad of Keith' cannot be used because it requires a newer version of iTunes. Go to www.itunes.com to download the latest version of iTunes. " I think I have the latest version of all Mac and Ipad and Itunes.

  Any help appreciated.

  If your Mac is on OS X 10.6.8 as your slogan says, you need to update, iOS 9.3.2 requires OS X + 10.8.5 on your Mac and iTunes 12.4 +.

• AppleTV will not play my music

  I have the latest AppleTV and subscribe to the Apple's music.  I can add new albums to my music, but after a few weeks, I've noticed that AppleTV will not play any music previously added. I can choose the music, but instead of play, AppleTV just simply jump.  What can I do?

  Sign out of the account and insert it again or restore the Apple TV.

  TT2

• new links will be open in a tab, only in the main window

  with firefox 21, links will not open a new tab, only in the main window. I put the option of opening tab, but it still does not work

  The setting in Firefox/tools > Options > tabs: "new pages should be opened in ': 'a new tab/window' is for links that specify a target window to open the link.
  
  This option allows to divert these links into a new tab instead of a new window.
  
  Links that do not specify a target will open in the current tab if it does not change JavaScript.
  
  If this is not the case then you can have an extension interfere.
  
  For links that do not specify a target, use a middle click or hold down the Ctrl key and click the link or use the context menu to open the link in a new tab or window.
  
  This applies to the bookmarks and other links so that you can click the view Image in the context menu of an image or click on the address bar to get a new tab with this link, the Reload button.
  
  Click on a JavaScript link to avoid having a blank tab.