Similar Questions

• DVD Sony player appears installed but does not recognize any CD or DVD

  I just bought a Sony Optiarc AD7260 DVD RW drive and installed in my system. I am running Win XP Pro sp3. My Bios says the drive is recognized by the latter and in the Device Manager in Windows, the drive shows up and says that "this device works properly." However, any disk I put in the drive (self burned cd / self burned dvd / retail music cd / dvd retail game / virgins DVD) never presents itself as being accessible. When the drawer goes in, I get the icon of the cd spinning for about 15-30 seconds, but then it goes back to the usual pointer. If I try to access the drive in Windows Explorer or any other program, it does not appear. I tried to use ImgBurn to get media info I had placed in the drive (blanks & with data) but it still says "incompatible medium installed" in the drive. The Optiarc is my 4th Sata device, 3 others are hard drives. The system is a dc7100 HP Compaq with 3 GB of ram. Any suggestions?

  Hello.

  Do you have the old disk, or access to another drive, try in the computer?  If these work then you will have a faulty drive.  It is possible to have a defective out of the box.  Also try a different SATA cable.  These can sometimes be problematic.

• 100% complete but does not print

  I had my Officejet Pro 8600 works well for almost a year, however, last week I had re format my iMac (10.9). Everything that is connected to it works very well. Since then, I have beeen unable to print. I can go to the utility system in the HP utility and print a confirmation page, but when I go to word or PDf and hit feel like I can see in the work in the print queue, it will usually get to «page1, completed 100% printing...» "and then nothing, no print out and"scanners printer"the Officejet is marked as"in use ".

  So far I have reset defaults to oriningal on the printer, re established the WiFi (which the utility says is "good"), turned off the firewall completely without success.

  Any suggestions welcome!

  Solved my problem of re installation of all HP software and setting up the IP asan wireless not Hello.

• When a sample plugin based, but does not load

  Is there some common reasons why a plugin of the sample (in this case, CS6, Mac OS X 10.11, Xcode 7) will build without problems but does not load in Illustrator? In this case, I am a student in MultiArrowTool, but it will not load. I have not found any place where I can set a breakpoint to see where it fails, so it seems that AI CS6 rejects before even any code. At first I thought she might need a separate UI installed, but none was provided with the sample project. Any suggestions would be much appreciated!

  Have you tried to put a breakpoint in PluginMain in Main.cpp? If the plugin fails silently, it is normally because this function returns an error code when it receives the startup message.

• First SDL application on the playbook, builds, but does not create a binary file.

  /*This source code copyrighted by Lazy Foo' Productions (2004-2012)
  and may not be redestributed without written permission.*/
  
  //Include SDL functions and datatypes
  #include "SDL.h"
  
  int main( int argc, char* args[] )
  {
      //The images
      SDL_Surface* hello = NULL;
      SDL_Surface* screen = NULL;
  
      //Start SDL
      SDL_Init( SDL_INIT_EVERYTHING );
  
      //Set up screen
      screen = SDL_SetVideoMode( 640, 480, 32, SDL_SWSURFACE );
  
      //Load image
      hello = SDL_LoadBMP( "hello.bmp" );
  
      //Apply image to screen
      SDL_BlitSurface( hello, NULL, screen, NULL );
  
      //Update Screen
      SDL_Flip( screen );
  
      //Pause
      SDL_Delay( 2000 );
  
      //Free the loaded image
      SDL_FreeSurface( hello );
  
      //Quit SDL
      SDL_Quit();
  
      return 0;
  }
  

  This generates without error, but does not generate a binary file to get started. Only a .o

  Any suggestions?

  EDIT: I am also including TCO with her. It's trip over. Did I miss something in my code for TCO runs correctly?

  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_create_read_struct'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlStrncasecmp'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlDocGetRootElement'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_init_io'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_get_image_height'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_get_image_width'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_create_info_struct'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_tRNS_to_alpha'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_longjmp_fn'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_read_image'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_palette_to_rgb'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlReadFile'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlFreeDoc'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_read_info'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_set_bgr'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `xmlCleanupParser'
  C:\Users\Acer\Desktop\TouchControlOverlay\Device-Debug/libTouchControlOverlay.so: undefined reference to `png_destroy_read_struct'
  

  EDIT: missed me png and xml2

  It seems to be missing the library 'png' on the link phase. Can you confirm for me that the link against it?

  Go into the settings of your project, build C/c++, select tab "settings of the tool. You will see the folders 'QCC Linker, libraries' on the list. You must have "png" it.

  Another way to check is when you compile look at the last line (the link phase, starting with "qcc o", you should see a '-lpng ' modifier.)

• XI (11.0.09) drive sometimes starts the process but does not appear in applications or open on desktop

  On windows 7 64 bit. Sometimes reader XI (11.0.09) begins the process but does not appear in the applications. In this case however the application is started for example start menu, double-click on pdf, double-click AcroRd32.exe. He

  11.0.09 is put on hold for us - supported by 11.0.08 solves the problem

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• printer is offline but but does not print completely baffled!

  Completely stumped with this. I have a brother MFP990 all in a station. It is connected wireless to my network. I have a laptop computer connected wireless network and it prints fine. My desktop computer, but does not print even if it seems to recognize that it is there. The printer is communicating with my computer and let me know the ink level is low. My scanner works perfectly and scans the computer, no problem. But whenever I try to print, the computer tells me that the printer is offline. I tried to disable Norton firewall, no difference. I tried to uninstall the software, and oddly enough, during the uninstall process, an exceptional print request was printed! When I reinstalled, same problem. Any ideas?

  Hi, Frank,.

  Open the event viewer > application log

  After return that error messages/event ID is related to the question of the printer

  Start > right click on computer

  Select manage

  Select event viewer > application log

  In the meantime, try the following:

  Start > type Services.msc
   
  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer
   
  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents
   
  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager
   
  Click on the + sign next to Ieeee... compatible printer
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall
   
  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet
   
  Wait 5 minutes
   
  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler
   
  Go to the manufacturer's website and search for updated drivers

• rpet installed iOS app "charged hydrated: application" but does not load

  Hello

  I installed my phonegap build app on my iPad.  rpet installed iOS app "charged hydrated: application" but does not load.  Keep saying please wait on the black screen.

  Any ideas of how to debug this problem?

  Thank you!

  First, find out if it's a problem of hydration.

  Turn off moisture, rebuild and install, then launch the application. It remains only to display and clear the screen?

  BTW: Be aware that configuration changes are ignored as long as hydration is activated during the generation.

• ERROR: ' we found your application uses iOS identifier for advertising but does not include the functional ad.

  I just create my new Single Edition App, but Apple rejected my application because:

  "We found your application uses iOS identifier for advertising but does not include.

  feature ad. This is not consistent with the terms of iOS Developer

  "License program, as required by the App Store Review Guidelines."

  https://iTunesConnect.Apple.com/WebObjects/iTunesConnect.woa/Wo/10.0.0.7.3.0.9.3.3.1.0.13. 3.1.1.11.3.1.0.6.1.1

  What does that mean? What should I do? I already created another unique edition correctly...

  Rebuild your simple editing application and then try again to Apple. We have released a fix for this Friday.

  Neil

• I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application also does not work for my site

  I have iphone 5 c. I've updated new version 10.0.2. Now Weather app is working for different cities but does not not for my site which has already been demonstrated in latitude and longitude. Similarly maps application does not also work for my site.

  Settings > privacy > location Services > confirm you always give permission to these applications to use your location.

  If not, try these standard troubleshooting steps.

  -Reset: hold the Home and Power buttons until you see the logo Apple (10-15 seconds).

  -Restore your iDevice: https://support.apple.com/en-us/HT204184

  If your backup is in iTunes, make sure that it is encrypted.

• I bought if sky was not So Far Away as ringtone but does not appear in my ringtones

  I bought if sky was not So Far Away as ringtone but does not appear in my ringtones

  I bought if sky was not So Far Away as ringtone but does not appear in my ringtones

• Xfinity toolbar enabled but does not appear on the screen

  My Xfinity toolbar is enabled but does not appear on the screen. Tried to turn it off, remove it and add it back, but no luck. There is a space in which it above my Norton toolbar but it's only this - space. How can I make it reappear?

  Problem has been resolved by downloading a new version of the Comcast toolbar. They use to automatically update this bar tools, but for some reason stopped mines updated. But problem is now solved by this new version, the toolbar is now visible on the screen.

• Can I allow an application for one person on my family share but does not allow for each other?

  Can I allow an application for one person on my family share but does not allow for each other?

  You can't delegate who has access and who doesn't have access to the applications. You can lock devices with age restrictions, so only items appropriate age are at their disposal. Or you can hide your list purchases. The purchased app can then be displayed when you want to share with someone else, then be hidden again once the application is downloaded on their device.

  I hope this helps.

  SI10

• new music from iTunes is easily downloaded from our iPhones on our macs, but does not appear on our computers portable regular windows. Why?

  new music from iTunes is easily downloaded from our iPhones on our macs, but does not appear on our computers portable regular windows. What can we do?

  Activate the automatic downloads. Download your past - purchases of Apple Support.

  TT2