Application CiceroUIWindFrame Palm.exe error

Similar Questions

• Schedule for the opening of the application on Tungsten E Palm.Exe error

  I have a Tungsten E (no disc of original material) which was working fine until yesterday. I can't open my calendar, even though I can open all the rest and receive an application Palm.Exe error. "The Exception integer division by zero".

  "(Oxc0000094) occurred in the application at location Ox67cz6F22. When I try to send the error message, it freezes all the Palm application. -Without the installation discs original can I do? Delete the files from my hard drive (and if so, which ones) and then re - sync? Instructions are appreciated.

  Click on the following link to the support page for your device on the kb.palm.com Web page.
  http://www.Palm.com/us/support/TUNGSTENE/

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  There is a link on this page for Palm desktop that you can download.

  Here are the instructions for XP to uninstall "own."

  You should first make a copy of your data to have just in case something
  is happening. You can find your data files by going to C:\Program Files\Palm or
  A Palm. Highlight your Palm Desktop user name and right click and copy.
  Then, go to the desktop of your PC, right-click on a blank spot block and select.

  Now you want to uninstall Palm Desktop and remove anything that has to do
  with Palm Desktop on your computer. As the folder above, remove the Palm folder. Once this is done, you need to delete some registry keys
  your registry PC operating system.

  Word of warning, go here and removing the wrong thing can cause your PC
  No start, crashing and deleting programs and data. If you feel
  you're not sure of yourself, see if you have a friend who can help you or a
  PC technician that you can pay to help you. This will show them all
  Should be deleted. To keep your current registry settings, we have a backup of the registry.

  On the PC, go to start and run Type "regedit" without the quotes

  Select WORKSTATION, browse to the file--> export. Should appear with a save as
  box. Current place of residence is very well should be in My Documents, or you can change in a location that you will remember. In the file name box, type "Regbackup [todaysdate]" i.e. Regbackup07072008. Then, the most difficult part.

  The best way to ensure that your work with the right key, select the key that is installation quick palm and press delete on your keyboard. It will ask you, are
  make sure you. Say Yes. Do the same for all the keys below.

  If you make a mistake, stop what you are doing. And call a PC technician.
  BUT do not turn off your computer.

  The reg keys are as follows (Note: some of the theses reg keys won't be here)
  But if they remove them)

  * Installation quick HKEY_CURRENT_USER\Software\U.S. Robotics\Palm
  * Transfer of files Robotics\PalmOne HKEY_CURRENT_USER\Software\U.S.
  * Robotics\Pilot Office of HKEY_CURRENT_USER\Software\U.S.
  * HKEY_CURRENT_USER\Software\Palm
  * HKEY_CURRENT_USER\Software\Palm, Inc.
  * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
  * HKEY_CURRENT_USER\Software\palmOne
  * HKEY_CURRENT_USER\Software\PalmSource
  * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm

  Then restart your computer

  Then, reinstall your Palm desktop from the CD and do a hotsync. If she asks
  for a user name and you synchronized your device before you put "test" If you "
  no sync before create you a hotsync name.

  Message relates to: Palm i705

• I have an application with lkcitdl.exe error that stops my logging information field. The alarms are listed as loggin buffer is full, even if the Citadel database is half empty.

  
  
  

• Creation of LV8.5 application EXE, Error 1502

  Hello

  I am building an application .exe of my code of LabView8.5. This is my first time doing so.

  My VI program works very well and has no errors.

  However, when I try to compile the application, I get the error

  Error 1502 to the node invoke in AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons:

  LabVIEW: Cannot save a bad VI without its schema.

  Method name: Save target: Instrument

  To my knowledge, there is no bad VI, like the VI to run ok in LabVIEW!

  Thanks for your help,

  David

  Construction of an exe does not actually include the dependencies, so you will be required to ensure that the dll is present on your target computer or build an installer that automatically places the dll on the computer.

• Event 1000, Application error (the default application name: w3wp.exe - name of the failed module: KERNELBASE.dll)

  Hello guys,.

  During the execution of a web app to make me as a mistake: remote server does not. Here are the details of the spectators of the event who were captured at the same time where this error occurred:
  Event 1000, Application error
  The failing application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb

  Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1

  Exception code: 0xe053534f

  Offset: 0x000000000000a88d

  ID of the process failed: 0 x %9

  Start time of application vulnerabilities: 0 x % 10

  The failing application path: %11

  Path of the failing module: 12%

  Report ID: 13%
  Event 1001, Windows Error Reporting
  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: w3wp.exe

  P2: 7.5.7600.16385

  P3: 4a5bd0eb

  P4: KERNELBASE.dll

  P5: 6.1.7600.16850

  P6: 4e211da1

  P7: e053534f

  P8: 000000000000a88d

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERC9CE.tmp.HDMP

  C:\Windows\Temp\WEREE30.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: d46a6849-8f6a-11e1-98af-00215e6e4855

  Display state: 4
  It is a priority issue we are facing in IIS. IIS is configured for the 2.0 Framework and underlying operating system is Windows Server 2008 R2 Standard. Please suggest how to solve. Any input related question above is significant.

  Hello

  In dealing with the problem with Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• application spoolsv.exe error.

  I have windows xp and I get the application spoolsv.exe error. It gives me the following message is displayed: the Instruction at 0x01fb0374 referenced memory at 0x1fed12c0 memory cannot be read. "I don't know what to do about this.  Help, please.  * E-mail address is removed from the privacy *

  Hello

  1 did you change on your computer?

  2. what service pack is installed on your computer?

  3. when exactly did you receive this error message?

  4. What is the brand and the number of the printer model do you use?

  Method 1:

  I suggest you try the steps suggested by Anthony - Support Engineer from the below mentioned link and check if it helps. These steps are for Windows Vista and should work as well on Windows XP.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/spoolsvexe-application-error/0a7b0b15-77b3-4a8f-9465-dff8517c226e

  Method 2:

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  Method 3:

  I also suggest you to follow the link and check.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  See also:

  How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP

  http://support.Microsoft.com/GP/pc_print_methoddstoptheprin

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Explorer.exe error of Application the Instruction at '0x7c910ed2' referenced memory at 0x03ede088.

  always get this when I try to open certain files? any suggestion will be good?

  Explorer.exe error of Application the Instruction at "0x7c910ed2" referenced memory at "0x03ede088", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  I also have error of Application Explorer.exe the Instruction "0x7c911689" referenced memory at "0 x 04180000", the memory could not be 'read' click OK to terminate the program, click CANCEL to debug the program

  Good.

  Not sure what it is yet, but you know what it is not.

  I don't know what to think of your permissions problem, but if records are read-only and not meant to be, are you not able to change the folder properties and what happens when you try to do?

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to act normally, you'll know that some extension you just disabled in this group of 3-5 is the culprit, then you can start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time or in small groups (to make things go faster) until your right click does not generate an error, and then restart and try again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• winver.exe error, error code "winver.exe 0xc0000005 application error".

  Title original: winver.exe error

  I had this problem "application error 0xc0000005 winver.exe".

  someone knows how to fix this?

  Hi Helel,

  1. When you get this error message?

  2 have you made changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1:

  Step 1: Start in safe mode and check if the problem persists or not.

  A description of the options to start in Windows XP Mode

  Step 2: If the issue is not reapper in safe mode, perform a clean boot, and then check that it helps if you can skip this method.

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure you perform the steps in How to configure Windows to use a Normal startup state to start your computer normally.

  Method 2: Run the System File Checker scan and check if it helps.

  File system (CFS) Checker

• Error occurring-re: application to 0x001a624b svchost.exe error

  I get this error message:

  problem svchost.exe application to the 0x001a624b error

  If I kill the program I can't open anything. Choose Debug does not either; nothing happens, but I can always open programs. The error message is displayed after a certain time once I have press cancel. Restart in safe mode to freeze after a minute before the start screen.

  I tried this:

  http://www.pchell.com/support/svchosterror.shtml

  But it does not work. So, I tried a system restore. Has no when it does not restart correctly. Also I can not access the internet and I was led to believe that the card has been uninstalled on the motherboard because of any deleted graphics card nvidia card. I don't know if that's true, but I lose the internet after that happened.

  In summary:

  Crashes in Mode safe

  Re-occuring svchost.exe error

  No internet!

  Cannot restart properly

  Cannot do the system restore.

  Any ideas what I could do? If there is nothing so how could I go about upgrading to a new OS?

  Run Malwarebytes in safe mode as suggested.

  The following link explains (if you can understand what that means?) Event ID: 63.

  http://support.Microsoft.com/kb/891642

  Hope this helps, Gerry Cornell

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• NTVDM.exe. trouble message I said: "16-bit MS-DOS subsystem" then C:\Windows\sustem32\ntvdm.exe error while setting up environment for the application

  I can not also with ntvdm.exe. I'm no computer expert. The message said: "16-bit MS-DOS subsystem" (this on the header of the window). Then the message is C:\Windows\sustem32\ntvdm.exe error when defining the application environment.

  I already did a sfc/scannow and Windows Resource Protection did not find any breach of integrity.

  I'm trying to run an application on this website http://www.ray-ban.com/international/science/virtual-mirror.

  I'd appreciate any help.

  Best regards

  original title:ntvdm.exe. disorder

  Hello
  You are able to use your applications without problem?

  To check what is causing the problem, try the following steps:

  1:NTVDM method is bound to display drivers for nVidia.I suggest you to update display drivers on the manufacturer's Web site

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Clean boot

  Put the computer in a clean boot (namely if any third-party software hinders the process)
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service.

  Note: After you find the program causing the problem, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.

  3:Disable method and then check the firewall/security software on the system tray.
  Note: Activate the security software after the test

• BTTray.exe, error to start the Application.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:BTTray.exe, error to start the Application.

  • Programs that you have problems with the Bluetooth does not work overwhelming
  • BTTray.exe, Application error messages start error.
  • Recent changes made to your computer: just updated to windows update
  • What have you tried to solve the problem, I tried to look at Windows Update and also send mail to Microsoft

  Read the following article to see if it helps to solve the problem: http://support.dell.com/support/topics/global.aspx/support/dsn/en/document?c=us&dl=false&l=en&s=gen&docid=6CF68D431EAAB41BE040AE0AB6E16686&doclang=en.

  Are you still using the BTTray?  If this isn't the case, we can solve the problem in a more easy way.

  Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Search bttray.exe or mfc80.dll and when you find it uncheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart.   The message should be gone.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• ENVY 4-1215dx: HPConnectedremoteservice.exe errors

  Yesterday HP ENVY 4-1215dx laptop computer my wife started having problems with the screen flashes every 10-15 seconds, and when you enter, the letters should be retyped because they do not take the first time.  The laptop is running 64-bit Windows 8.  The PC has restarted last night, but it does not solve the problem.

  This morning I ran a tool called MiniToolBox, and he found several errors to HPConnectedRemoteService.exe.  An example of one of the mistakes is below.

  Application errors:
  ==================
  Error: (23/04/2015 07:28:29) (Source: Application error) (user :)
  Description: Failing the application name: HPConnectedRemoteService.exe, version: 1.0.1218.0, time stamp: 0x5078a573
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
  Exception code: 0xe0434352
  Offset: 0x0000000000047b8c
  ID of the process failed: 0xfdc
  Start time of application vulnerabilities: 0xHPConnectedRemoteService.exe0
  The failing application path: HPConnectedRemoteService.exe1
  Path of the failing module: HPConnectedRemoteService.exe2
  Report ID: HPConnectedRemoteService.exe3
  Failed package name: HPConnectedRemoteService.exe4
  Flaws in the application related to a package ID: HPConnectedRemoteService.exe5

  Error: (23/04/2015 07:28:29) (Source: Runtime .NET) (user :)
  Description: Application: HPConnectedRemoteService.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  The exception info: System.PlatformNotSupportedException
  Battery:
  at System.ServiceModel.Channels.TransportManager.Open (System.ServiceModel.Channels.TransportChannelListener)
  at System.ServiceModel.Channels.TransportManagerContainer.Open (System.ServiceModel.Channels.SelectTransportManagersCallback)
  at System.ServiceModel.Channels.HttpChannelListener'1 [[System.__Canon, mscorlib, Version = 4.0.0.0, Culture = neutral, PublicKeyToken = b77a5c561934e089]]. OnOpen (System.TimeSpan)
  at System.ServiceModel.Channels.CommunicationObject.Open (System.TimeSpan)
  to System.ServiceModel.Dispatcher.ChannelDispatcher.OnOpen (System.TimeSpan)
  at System.ServiceModel.Channels.CommunicationObject.Open (System.TimeSpan)
  to System.ServiceModel.ServiceHostBase.OnOpen (System.TimeSpan)
  at System.ServiceModel.Channels.CommunicationObject.Open (System.TimeSpan)
  at SwitchBoard.Utils.WCFServiceHostUtil.setupService (System.Object, System.Type, Int32, Boolean)
  at SwitchBoard.SwitchBoardService.RunService)
  at System.Threading.ExecutionContext.RunInternal (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object)
  at System.Threading.ThreadHelper.ThreadStart)

  After finding these errors, I went to control panel > programs and features and a repair for HP connected remotely done, it does not solve the problem.  Then, I uninstalled HP connected remotely, restarted, and the problem seems to be fixed.

  I need HP connected remotely to what whether?  If so, how can I download a new copy that works?

  Gary

  HP no longer offers the connected Remote App is not available in any app store.  This review:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03748009

  It is not necessary to the operation of your computer and if you have any problems, simply uninstall it.

• Flash (TCrdMain.exe) error on Satellite Pro U200 card

  Hello

  I have Vista Business installed on Toshiba Satellite Pro U200
  and, in the event log, the following error message:

  Log name: Application
  Source: Application error
  Date: 20.11.2008 18:06:38
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: toshiba
  Description:
  Application TCrdMain.exe, version 1.0.0.9, time stamp 0x458faba6, failed mscorwks.dll module, version 2.0.50727.1434, time stamp 0x4757b767, exception code 0xc0000409, offset error 0x002b832f, 0xe38, failing application start 0x01c94b322888a3c2 process id.
  The event XML:
  
  
  
  1000
  2
  100
  0 x 80000000000000
  
  11115
  Application
  Toshiba
  
  
  
  TCrdMain.exe
  1.0.0.9
  458faba6
  mscorwks.dll
  2.0.50727.1434
  4757b 767
  c0000409
  002b832f
  E38
  01c94b322888a3c2
  
  

  someone knows howto fix it or where can I download this software of Flash cards and reinstall?

  ist it this software?

  Flash Media Driver

  http://de.computers.Toshiba-Europe.com/innovation/vista_drivers.jsp?macId=&mode=userMachines&userOS= & action = search & selProduct = 656 & selOS = 26 & selType = 244 & country = 37 & language = 13 & search =