Application deployment error (failed to create schema) planning

Similar Questions

• Oracle Identity Federation - OID RCU failed to create schema

  Hello
  I try to install OIF - Oracle Identity federation according to the OBE http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/oif/11g/r1/oif_install/oif_install.htm
  
  1. I installed the Oracle 11 g 2 11.2.0.3 with the charset = AL32UTF8 and db_block needed a staff of 8 K and nls_length_semantics = character creation database and listener.
  2 install weblogic 10.3.6
  3. start installation of IOM - Oracle, chosen identity management install and configure the option and the schema creation options.
  4 installation goes fine, but when setting up, he fails. Here's the relevant part of the log.
  
  I tried several times just to fail again. If someone would want us to enlighten as what goes wrong here. Let me know if you need more information about the configuration...
  
  
  
  
  File: ...//oraInventory/logs/install2013-05-3018-01-31 AM .out_
  
  
  ORA-01450: length maximum key (6398) exceeded
  
  Completion percentage: 62
  Repository creation utility: create - completion summary
  Information on the database:
  Host name: vccg - rh1.earth.com
  Port: 1521
  Service name: OIAMDB
  Logged in as: sys
  Prefix for schema owners (non prefixable): DEFAULT_PREFIX
  RCU Logfile: /data/OIAM/installed_apps/fmw/Oracle_IDM1_IDP33/rcu/log/rcu.log
  RCU Checkpoint object: / data/OIAM/installed_apps/fmw/Oracle_IDM1_IDP33/rcu/log/RCUCheckpointObj
  Of component schemas that you created:
  Status Logfile element
  Oracle Internet directory is not /data/OIAM/installed_apps/fmw/Oracle_IDM1_IDP33/rcu/log/oid.log
  
  Repository creation utility - create: finished
  Repository - Dropping and cleaning of the defective components creation utility
  Fall of repository and cleaning of defective components.
  Completion percentage: 93
  Percentage of completion:-117
  Completion percentage: 100
  -RCUUtil createOIDRepository status = 2 - java.lang.Exception: the RCU failed to create schema OID
  at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:792)
  at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
  at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
  at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
  at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
  at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
  at java.lang.Thread.run(Thread.java:662)
  
  ____________________________________________________________________________________________________________________________________________________
  
  
  
  
  
  File: ...///fmw/Oracle IDM1_IDP33/RCU/log/OID.log_
  
  
  CREATE UNIQUE INDEX rp_dn on ct_dn (parentdn, rdn)
  *
  ERROR on line 1:
  ORA-01450: length maximum key (6398) exceeded
  
  Published by: 1008964 on May 30, 2013 12:10
  
  Published by: 1008964 on May 30, 2013 12:12

  Change NLS_LENGTH_SEMANTICS = BYTE. and try again.

• My Readyboost does not work. When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.

  ReadyBoost - Cache problem!

  My Readyboost does not work.  When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.  The process cannot access the file because it is being used by another process.  Help!

  Hello

  Did you change your computer?

  (a) click on the 'Start' button, then click on 'computer '.

  (b) right click on the USB drive or flash memory card that uses Windows Ready Boost, then click 'properties '.

  (c) click on the tab "Ready Boost" in the 'Properties' window to the memory card or the USB drive.

  (d) select the title radio button "do not use this device ' then click on 'OK '. This step should remove automatically the Ready Boost cache on the device. If you are unable to use the full capacity of the device, proceed to the next step.

  (e) double-click the memory card or the USB drive.

  (f) right click on the file 'ReadyBoost.sfcache' and then click 'remove '.

  (g) click 'Yes' to remove the ReadyBoost cache.

  Reconnect the device ready boost which allows the service to boost loan which will create the new cache.

  I suggest you to follow the links and check out them.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Turn ReadyBoost on or off for a storage device

  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Using memory in your storage device to speed up your computer

  http://Windows.Microsoft.com/en-us/Windows7/using-memory-in-your-storage-device-to-speed-up-your-computer

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• Before demo application of Oracle Fusion Store - failed to create schema

  I downloaded the Demo Application Fusion Store Front "FusionOrderDemo_R1PS2.zip" of http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html.
  Followed the instructions on the same page. But creating schema is a failure.
  
  I don't know why this isn't picking all the way up to JDeveloper which is looking for wlserver_10.3\server]\lib in I:\Oracle\FusionMiddleware\wlserver_10.3\server\lib (JDeveloper not getting added to the path.)
  The Build.Properties file content:
  
  JDeveloper.Home=I:/Oracle/FusionMiddleware/JDeveloper
  CBC. Home =... / /...
  
  
  # Info JDBC used to create a schema
  JDBC. Driver = Oracle.JDBC.OracleDriver
  jdbc.urlBase=jdbc:oracle:thin:@localhost
  JDBC.port = 1521
  JDBC.sid = XE
  
  # Information about the default setting for the user to demo.
  db.adminUser = system
  db.demoUser = FOD
  db.demoUser.password = fusion
  db.demoUser.tablespace = USERS
  db.demoUser.tempTablespace = TEMP
  
  Error:
  
  BUILD FAILED
  F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\Ant\build.XML:51: The following error occurred during the execution of this line:
  F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\DBSchema\build.XML:91: The following error occurred during the execution of this line:
  F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\DBSchema\build.XML:56: The following error occurred during the execution of this line:
  F:\mywork\FUSIONORDERDEMO\FusionOrderDemo_R1PS2\Infrastructure\DBSchema\build.XML:28: I:\Oracle\FusionMiddleware\wlserver_10.3\server\lib not found.
  
  Total time: 2 seconds
  
  
  Thank you
  Rajdeep

  Rajdeep,

  If you installed JDeveloper to I:/Oracle/FusionMiddleware/JDeveloper (otherwise said, it contains directories "jdeveloper" and "wlserver_10.3", among others), your build.properties should be:

  jdeveloper.home=I:/Oracle/FusionMiddleware/JDeveloper/jdeveloper
  src.home=..//..
  # JDBC info used to create Schema
  jdbc.driver=oracle.jdbc.OracleDriver
  jdbc.urlBase=jdbc:oracle:thin:@localhost
  jdbc.port=1521
  jdbc.sid=XE
  
  # Information about the default setup for the demo user.
  db.adminUser=system
  db.demoUser=FOD
  db.demoUser.password=fusion
  db.demoUser.tablespace=USERS
  db.demoUser.tempTablespace=TEMP
  

• Failed to create the Planning Application

  Dear Guru,
  
  I just installed Hyperion Suite. When I tried to create a planning application, I am getting error below.
  
  http://img717.imageshack.us/f/issueb.jpg/
  
  
  
  But I am able to create applications with this wizard.
  
  http:// < planningmachine >: 8300/HyperionPlanning/AppWizard.jsp
  
  
  When I try to open the dimension library, I get this error.
  
  «Connection could not be established because the target matchine has actively refused it.»
  "Error: code: com.hyperion.awb.web.common.DimensionServiceException.
  
  Thanks in advance...

  Hello
  Did you ensure that all services of EPMA are running? It seems that the process Manager service is down.

  See you soon,.
  Alp

• OIM 11 g R2 installation question. Failed to create schema of the IOM by using RCU 11.1.2

  I tried to install OIM 11 g R2 on a Windows 2008 R2 64-bit server and were met the following error during the creation of diagrams of IOM. Other patterns, such as metadata, SOA, user's email services and other associated schema creation succeeded. But creating schema IOM took more than 2 minutes and finally it fails with the error below.
  ################################################################
  UCR-6130: Action failed
  UCR-6135: error when trying to execute the action of java.
  ################################################################
  
  Components used:
  OS: Windows Server 2008 R2 64 Bit
  DBS: 11 GR 2 (11.2.0.1)
  UCR: 11.1.2
  
  The first error was ora-12637 package receive failure followed by Table or view does not exist. I couldn't get much information from the IOM and the rcu.log.
  
  I put the processes and the open_cursors session_cached_cursors described in preinstalling OIM 11 g R2 installation step.
  
  Pointers on what will be highly appreciated.
  
  Thank you
  Srini

  Copy the msvcr71.dll rcuHome\jdk\jre\bin inside the installer of the UCR and paste in C:\Windows\SysWOW64.

  Try to rerun the rcu with the new user, i.e. instead of DEV_OIM, run it with DEV_OIM1.

  Or delete the user DEV_OIM first and then use the same user.

• Error: "failed to create the toolbar.

  Original title: Quick Launch toolbar

  I have a Windows XP Home SP3 PC and when I try to open the Quick Launch toolbar, I get a message "cannot create Toolbar".

  the quick lauch folder appears to be missing, but it is not recreated with the help of IE4UINIT. EXE and re register the dll recommended in the MS site doesn't help either.  The aims of registry keys to the MS site ion also seems also OK.
  Any other suggestions please?
  Hi wheelyjon,
   
  This problem may occur if the Quick Launch folder has been deleted.
   
  To resolve this problem, re-create the Quick Launch folder.
  See the following article to do the same thing:
  Error message: failed to create the toolbar

• VCB error: failed to create a snapshot suspended because the snapshot creation operation has timed out for holding off the coast of I/O in the frozen VM

  Hi all, I have a problem, creating a model by cloning the Live VM for Windows Server 2003 x 64 Standard edition and in fact it happens on my own install Windows Server 2008 R2 Enterprise x 64 as well?

  Here is the error message:

  Creating snapshot of the Virtual Machine

  * _Cannot

  create a suspended because the create snapshot snapshot operation

  timed for the outfit out of e/s in virtual jelly

  machine._*

  I installed the VMWare tools and make sure that the VSS service are all on but he failed.

  any help in this matter would be greatly appreciated.

  Thank you.

  Kind regards

  AWT

  Check out my Guide to proven practices VCB on the VI:OPS website-> http://viops.vmware.com/home/docs/DOC-1392

  Dave Convery

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  http://Twitter.com/dconvery

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• More about "ERROR: failed to create a snapshot of a volume of the source.

  I saw the previous posts on this and have tried to follow all the advice, but nothing helped.  I am running XP and you have two hard drives, NTFS and both have plenty of space.  My destination is an external hard drive, FAT32, with plenty of room.  I get the ERROR message: failed to create a snapshot of a volume of the source. Ppossible causes include not seen all NTFS volumes on Windows XP or Windows 2003 source systems with no is not enough of disk space.

  I installed the converter as an administrator, I rebooted several times, I ran / f checkdsk on both hard drives and external drives, I have disabled all the services that I am uncomfortable, turn off, but just, I get this message.  I have attached the log file.

  Thanks for any help.

  drbking wrote:

  I see that a small part of my answer was missing - the microsoft running thing, I found I was missing vssui.dll.  Downloaded, ran the microsoft thing and am now running the converter again.  Know in the morning, if it works (takes about 9 hours).

  How is the conversion?

  -Ryan

• FPGA error: failed to create the C Series module

  I use sbRIO 9631 with LabVIEW 2012, as well as the FPGA 2012 module. Everything worked fine until yesterday, I got this error when creating a new FPGA project.
  «LabVIEW FPGA: an error has occurred loading the VI on the FPGA device.»  Check that the target is connected and powered and that the target resource is configured correctly.

  After ignoring this error, I can create any VI in the FPGA target, compile it and it works but can not do anything with host one. MAX configurations show so no error.
  I have attached snapshots for convenience.

  Note: This sbRIO came with a DVD of LabVIEW 8.6 and similarly associated modules version. I had been using this version for a year. Then I got LabVIEW 2012 with the last modules and now facing this error.

  Hi NapDynamite,

  You should not need to uninstall your previous version of LabVIEW for the development of your PC.

  You can see what version of NOR-RIO you have installed on your sbRIO? You can view it by selecting the sbRIO under "Remote Systems" of MAX, and then by selecting the category of software. You may need to update the version of NOR-RIO that is installed on the sbRIO.

  You can try this first?

  Kind regards

• Error: Failed to create the application process: operation not permitted - deployment of ripple to Dev Alpha

  Hey people,

  I was puzzled on this the last bit of time and can't seem to find a solution. (The closest thing I could find is here: http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/Webapp-not-starting-on-device-VM... but there does appear to be a response [UPDATE: Adam Stanley mentioned that it was due to a missing Debug token, and this isn't the case for me.])

  When I try to "Package & launch" of the ripple, the project is created correctly and even installs the application on the device (is the application icon on the home screen). However, when he tries to run the application, the console of the ripple spit:

  "Error: cannot create the application process: operation not permitted".

  Any later attempt to open the application from the icon on the screen will result in an immediate fall.

  As an attempt to circumvent, I use "Package & sign" and then run the blackberry-deploy with installApp - launchApp - tool options and... it generates the same error as described above.

  I'm working on OS X, and I successfully installed the Webworks SDK as well as the undulation on Chrome Plugin. I have a project together upward with a running python web server and can view the content properly on the ripple. I have my signature correctly registered keys and I generated the file debugtoken.bar. I downloaded the debugtoken on the alpha dev successfully device and placed a copy of the debugtoken.bar file in the root folder of the SDK Webworks. The unit is in developer mode.

  Someone at-troubleshooting suggestions?

  [Edited for format (original post deleted line breaks) and also to highlight a number of things]

  So after getting back to the question, I loaded build with the SDK 1675 Webworks (1.0.4.5) published today, and I was able to go beyond the permission error that plagued me previously.

  Thanks again for the help Adam.

• HFM application deployment error

  Hi all

  I get the following error trying to deploy the application:

  Account

  Error: You can not base members in member account/custom size become parents unless you disable metadata first.

  Account

  > > > > > > 655502_Flow

  Error: You can not base members in member account/custom size become parents unless you disable metadata first.

  Account

  > > > > > > ALO1

  Error: You can not base members in member account/custom size become parents unless you disable metadata first.

  Account

  > > > > > > ALO2

  Error: You can not base members in member account/custom size become parents unless you disable metadata first.

  Account

  > > > > > > GAP3

  
  

  The above accounts are not core members. I tried to synchronize the shared library account dimension. It still does not work. All entries are greatly appreciated.

  
  

  Thank you

  Steffi.
  

  Hey Steffi.

  Looks like these members exist as members of base to the currently deployed local application and have been replaced by relatives in EPMA.  If this is the case, I do it with the following steps for each of the accounts in question (if DEV):

  1. Add a new temporary parent directly above the 655502_Flow account.
  2. Make the 655502_Flow children's account of the new temporary parent.  These children are now brothers of 655502_Flow, and they should all be basic.
  3. Deploy the application
  4. Rename the account 655502_Flow in 655502_Flow_base
  5. Deploy the application
  6. Create a new 655502_Flow account and add it as a parent where it was
  7. Remove the account from 655502_Flow_base
  8. Deploy the application

  If you're basically rename/delete the 655502_Flow account and create a new parent with the name of the Member 655502_Flow.

  Thank you

  Erich

• The Application Deployment error

  I am currently using JDev 11.1.2.0.0. When you try to deploy the application, I get the question below. Can someone please suggest.

  < 10 July 2013 10:41:47 AM PDT > < error > < hats > < BEA-149265 > < error has occurred in the execution of the request for deployment with the ID ' 1373478105591 'for task ' 0'. Error is: "weblogic.application.ModuleException: could not load the webapp:" hdms "" "

  weblogic.application.ModuleException: cannot load the webapp: "hdms.

  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)

  at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)

  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  Truncated. check the log file full stacktrace

  Caused by: weblogic.management.DeploymentException: error: unresolved Webapp library makes reference to "[ServletContext@30924772[app:XXXXXXXX module: hdms path: / hdms spec-version: 2.5]", defined in weblogic.xml [Extension name: HDMSSharedLibrary, exact match: false] "

  at weblogic.servlet.internal.WebAppServletContext.processWebAppLibraries(WebAppServletContext.java:2754)

  to weblogic.servlet.internal.WebAppServletContext. < init > (WebAppServletContext.java:415)

  to weblogic.servlet.internal.WebAppServletContext. < init > (WebAppServletContext.java:493)

  at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:418)

  at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:972)

  Truncated. check the log file full stacktrace

  >

  < 10 July 2013 10:41:47 AM PDT > < WARNING > < hats > < BEA-149004 > < failures have been detected all introducing deploy task for application XXXXXXXX. >

  < 10 July 2013 10:41:47 AM PDT > < WARNING > < hats > < BEA-149078 > < message 149004 track battery

  weblogic.application.ModuleException: cannot load the webapp: "hdms.

  at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:393)

  at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)

  at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)

  to weblogic.application.internal.flow.DeploymentCallbackFlow$ 1.next(DeploymentCallbackFlow.java:517)

  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)

  Truncated. check the log file full stacktrace

  Caused by: weblogic.management.DeploymentException: error: unresolved Webapp library makes reference to "[ServletContext@30924772[app:XXXXXXXX module: hdms path: / hdms spec-version: 2.5]", defined in weblogic.xml [Extension name: HDMSSharedLibrary, exact match: false] "

  at weblogic.servlet.internal.WebAppServletContext.processWebAppLibraries(WebAppServletContext.java:2754)

  to weblogic.servlet.internal.WebAppServletContext. < init > (WebAppServletContext.java:415)

  to weblogic.servlet.internal.WebAppServletContext. < init > (WebAppServletContext.java:493)

  at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:418)

  at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:972)

  Truncated. check the log file full stacktrace

  >

  [10: 41:47] undeployment.

  [10: 41:47] - incomplete deployment.

  [10: 41:47] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  # Cannot run application XXXXXX due to the deployment on IntegratedWebLogicServer error.

  [Application XXXXXXX stopped and cancelled Server Instance IntegratedWebLogicServer]

  Hi 933874,.

  Can you please try commenting this line [Extension name: HDMSSharedLibrary, exact match: fake] in weblogic.xml

  Thank you

  Sandeep

• The ADF application deployment error

  Hi all

  We get another error in the SOA application

  Each time that attempted to deploy the ADF for the application (.) The EAR) in soa_server1, it gave me error archive invalid soa.

  Help, please.
  

  Hello

  Thanks for posting.

  The above error isony because we can deploy only archive SOA (.) SAR files) on SOA_server1 managed server.

  We can deploy only SOA archive (.) SAR files) on SOA_server1 managed server. We cannot deploy ADF (.) Applications of EAR) in SOA_server1 managed server. To deploy the ADF (.) Applications of EAR) we must deploy either Jdev Weblogic Console.