application error - ALCXMNTR. EXE

Similar Questions

• What is an application error, wmiprvse.exe? It keeps popping up all the time and its quite annoyinng. Can I get rid of him?

  What is an application error, wmiprvse.exe? It keeps popping up all the time and its pretty boring. Can I get rid of him?

  What this has to do with Windows Media?

  Rwillet,

  Thank you for visiting the Microsoft answers community.

  The wmiprvse.exe file is otherwise known as Windows Management Instrumentation.

  In research, I found a few articles that might help you:

  Windows wmiprvse.exe related errors

  Wmiprvse - wmiprvse.exe

  You can run your scan virus and if necessary, perform a System Restore to a point prior to the error occurring.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• continue to get an error message"... application error - syhost.exe. the instruction at "0x00ceec" referenced memory at "0x00000000".

  I constantly receive following error message: application error - syhost.exe. The instruction at "0x00c89eec" referenced memory at "0x00000000". The memory could not be written.

  What is c?

  Hello

  · You have enabled the automatic updates?

  · What is the number and the model of the computer?

  · What is the service pack installed?

  · Do you remember any changes made on the computer before the show?

  You can check the link below: you receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box: http://support.microsoft.com/kb/927385

• Application error: vmsnap23.exe

  Hello, all.

  This is my first post on this forum, so please be nice!

  Last month, I have an application error that occurs whenever I connect. It seems that the vmsnap23.exe application fails to start, but I don't know what it is (* or * else) so that I can fix it. Any ideas?

  I'm on XP (sp3 since yesterday)

  The event viewer shows this information:

  + Faulting application vmsnap23.exe, version 0.0.0.0, module failed ntdll.dll, version 5.1.2600.5512, address failure 0 x 00011669. +

  I have followed the Microsoft but have not found something useful here. The program is slightly on the C: and not in "program files", or one of the system folders.

  It is a program of Toshiba, part of XP * or * something questionable I can simply delete?

  Thanks for the research.

  See you soon!

  Ken

  Reading a few other forums I found an interesting comment on VMsnap23.exe. Supposedly this process belongs to McAfee VirusScan. McAfee is installed on your laptop?

• application error Userinit.exe & rundll32

  I don't know if anyone has any help on this would be greatly appreciated.

  I am Windows Windows XP Home SP2 on a Satellite edition.
  I think I have a virus that prevents me to connect to my computer properly. Whenever I connect to my computer, it shows the desktop, but nothing else. He then says "userinit.exe application error 0xc00000005 application failed to initialize properly."

  I have to use the Task Manager to find the office. I then give me rundll32 errors with the same error as stated above code. The rundll32 error prevents me from doing anything administrative, so I can not turn off the system restore, I could save a copy of the virus.

  I ran superantispyware and it seems to keep finding the same virus without getting rid of them.
  I really want to do a repair install, I can't find my cd.

  In my opinion these two files are not affected by viruses.
  Maybe your superAntiSpyware it cannot recognize as common system files.

  To ensure that your system is not affected by a virus, you should try to use multiple VRU and spy ware applications;
  I use the software called Antivir. The standard version can be downloaded for free from various Web sites. I recommend also using an Ad-aware and spy boot Search and Destroy. All these tools prevent system of Trojan and Virus attacks. You should use it too.

• stop application error: McSvHost.exe

  Whenever I have shut down my computer, I get a delay with McSvHost.exe application error.  instruction at '0x6280436a' memory Ref 0x07ff8cf4.  the memory could not be written.  Click on ok to terminate the program.

  When I did a search on google I found that it is a very common error to mcafee anti-virus product.  I had not had this error several months ago and do it now.

  How is this application occurs errors?

  What can I do to get things working smoothly so that it not there no application error?

  Related: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/unable-to-install-windows-updates-error-error/4323e99b-f524-47ea-ba1f-d263fbdd3cc6 (28 Sep-11)

• Application error - wmplayer.exe. The 0x04a3195d referenced memory at 0xd48642b1 instructionat. The memory could not be used.

  Title: Windows 7 media player

  When I try to open a video file, I get a message:

  Wmplayer.exe - Application error

  The 0x04a3195d referenced memory at 0xd48642b1 instructionat.
  The memory could not be used.
  Click OK to finish

  That means this average-how can I overcome it?

  Thank you

  Hello

  -Respect the limit with the specific video file?
  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you follow the steps to run the troubleshooter from the link and check if the problem persists.
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
   
  Method 2: (SFC) System File Checker
  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  To run the System File Checker tool, follow these steps:
  (a) click Startand type cmd in the box start the search.
  (b) right click on cmd in the list and then click Run as administrator of and programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  (c) at the command prompt, the following line and then press ENTER:
  sfc/scannow
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7?
  http://support.Microsoft.com/kb/929833
  Method 3: I also suggest you to restore of the system from the link and check if that helps.
  Perform a restore of the system to a point prior to the show and check if this solves the problem.
  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
   
  Method 4: I also suggest you to turn off the setting Data Execution Prevention and check if that helps.
  Change Data Execution Prevention settings
  http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings
  Hope this information helps.

• Application error - DellDock.exe

  I'm having a problem with a recording on my Dell laptop. I can get to the login screen and select a user, but once it starts loading I get the following error message "application DellDock.exe ProcessID error = 0xd24 (3364) ThreadID = 0xd28 (3368)" and asks me if I want to temrinate the program. Regardless of the option I chose the screen stays black and nothing happens. I am unable to get on the Task Manager to stop all processes. Help, please

  Hello

  Try using Safe Mode - several times, press F8 that you start.

  Check with Dell Support, their drivers and documentation online and ask in the Dell
  forums for known issues.

  If necessary you could re - install the Dell Dock.

  Reference Dell Dock
  http://www.DellDock.com/

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

• Pavilion M1Y45UA #ABA: Pavilion 17-g125ds AccelerometerSt.exe - Application Error

  Hello.  I recently acquired a new Notebook of 17-g125ds (Energy Star) HP Pavilion running with a Windows 10 (64-bit) operating system.  Once the system starts every time, I get an error message saying: Application error - AccelerometerSt.exe.  I got messages about this problem in the forum but none that I could find had to do with the Pavilion model I own.  Can you please help me to solve this problem.  Thank you.

  Hello

  Try the following.

  Download the installer for HP 3D DriveGuard on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  One time finished, open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows rebooted, open your download folder, click with the right button on the HP 3D DriveGuard installation program and select "run as administrator to start the installation.

  Once again, when this has completed, restart the laptop.

  Kind regards

  DP - K

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Re: AccelerometerSt.exe - Application error

  Hello

  I just bought the envy 15 and used for only one day, the next day I get this error:

  Re: AccelerometerSt.exe - Application error

  Your quick help is very much appreciated.

  Thank you

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• IEHelper Acrobat: iexplore.exe - Application error

  Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

  The memory could not be 'read' "what should I do?

  Which version of Acrobat reader you have installed?
  Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

  All that s

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Pavilion x 360: AccelerometerSt.exe - Application error

  From the start, I get the following error.

  AccelerometerST.exe - Application error - the application failed to start correctly (0xc000007b).  Click OK to close the application.

  My system shows now that he needs for the update but it will not complete the process.  No matter if I select shut down or restart.

  It started a few weeks ago.  What should I do about it?

  Hello

  Try the following.

  Open Windows Control Panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you get an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Restore7.exe application error

  So, when I try to boot my windows, an error box will appear, who says:

  "Restore7.exe - Application error. The instruction at 0 x 77892591 referenced memory at 0 x 00008084. The memory could not be read. »

  When you click OK, the computer starts and get stuck on this same page. I can't go to HP recovery by pressing F11. Recovery CD no longer works. Operating system is Windows Vista Home Premium

  can someone help me please. This problem can be solved by buying new hard drive?

  There is the info from my computer. :

  http://support.HP.com/us-en/document/c01409678

  How are recovery disks does not work? If you insert the first disc into the optical drive, press any key shortly after turing on your computer, you should start the recovery menu so that you can fully recover your computer.

  In addition, this could have something to do with Windows Product Activation? If you have added the internal devices, remove them and make sure you unplug all USB devices. Just the mouse, keyboard and display connected when you attmpt to a recovery.