application .exe Odile could not run because the application configuration is incorrect

can I get support to solve this error.

Hello

 
  • This happens with this particular application?
  • You try to use the scanner for MS?
 
You can view these methods:
 
Method 1:
 
I suggest you to disable any program of security on your computer and check if it solves the problem.
After reviewing the question you must reactivate the security on your computer program.
 
Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

 
Method 2:
If the error persists, please provide us with the error log:
 
See also:

Tags: Windows

Similar Questions

  • This application could not start because the configuration - side by side - is incorrect

    After the upgrade to Windows7 x 64 professional, I am now get, "this application could not start because the configuration - side by side - is incorrect ' nero drive. I tried to reinstall the program and uninstall Microsoft Virtual C++ packages + without any result.

    Any help would be appreciated.

    Hi ChickC  

     

    Welcome to Microsoft Windows 7 answers Forum!

    a. use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    2. Type the following command and press ENTER:

    sfc/scannow

    The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    ·         Infoermation more on SFC scan found in this document:

    http://support.Microsoft.com/kb/929833

    b. perform a disk check:

    Use the following steps:

    1. Open computer by clicking the Start button, click computer.
    2. Click the drive you want to check, and then click Properties.
    3. Click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

    To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

    To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

    1. Click Start.

    Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

    The .NET framework update

    Download and install the most recent of the .NET Framework

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

    If the error still persists please provide us with the error log:

    Type eventvwr.msc/s in the address bar.

     The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

    It will be useful.

    Thank you, and in what concerns:

    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum

    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

  • Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

    Hello

    Any help step by step to address this issue would be welcome

    On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

    Thank you in anticipation

    Hi BackrowSteve,

    1. did you of recent changes on the computer?

    Method 1:

    If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

    http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

    Method 2:

    If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

    Step 1: To uninstall the package:

    a. open programs and features.

    b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

    c. click on uninstall at the top of the list.

    Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

    Package redistributable Microsoft Visual C++ 2010 (x 86)

    Package redistributable Microsoft Visual C++ 2010 (x 64)

    Hope this information is useful.

  • the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

    the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

    Ranjana,

    Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

    1. check that the guest operating system that you want to install VMware Tools is fully certified.

    2. check that the correct guest operating system is selected

    3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

    4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

    5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

    6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

    If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

    ~ dGeorgey

  • Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

    I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

    Windows could not start because the following file is missing or damaged;

    System32\Drivers\Ntfs.sys

    You can try to repair this file by starting Windows Setup using the original Setup CD

    Select 'r' in the first screen to start repair.

    Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

    1: C:\WINDOWS

    Which Windows installation you want to connect?

    (to cancel, press enter)

    What do I put here?

    You must first start on doing something so USB drive a bootable Hiren.

    Here's how:

    I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

    It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

    You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

    You can easily copy your personal data (documents, pictures, music) to an external drive.

    A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
    http://www.hirensbootcd.org/download/    (look to the bottom of the page).

    Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

    Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

    Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

    http://Rufus.AKEO.IE/

    I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

    Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

    Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

    When RUFUS is finished, it will say "DONE" at the bottom.

    Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

    When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

    Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

    A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

    Sometimes that works, then you can also click on start, run and in the type box:

    cmd

    Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

    CHKDSK c: /r

    This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

  • suddenly, I could not print because the computer cannot identify the printer

    Original title: printers

    I have windows XP Professional and a printer is connected to my PC, all of a sudden I could not print because the computer is unable to identify the printer. I unplugged the printer and plugged again and I turned off the computer, as I went to adding hardware but without success. could you please tell me how to restore the printer connection. In addition, the printer icon appears at all when I plug the printer cable

    Hello

    I suggest you run the difficulty mentioned in the link below:

    http://support.Microsoft.com/mats/printing_problems/en-us

    Alternatively, you can follow the steps mentioned in the link below to fix the issue:

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Hope this helps

  • "When restarting, get the error, Windows could not start because the following file is missing or corrupt: < root Windows > \system32\ntoskrnl.exe.

    Original title: black screen

    Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

    There is a good chance that the disk check running the Recovery Console will solve the problem.

    1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
      
    2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
      
    3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
      
    4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
      
    5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
      
    6. at the end of the output of scan type > press ENTER.
      
    7 restart your computer.

    If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

  • Error hpqtra.08.exe - Unable to locate component this application could not start because the WINSPOOL. DRV was not found.

    Original title: I have Security Essentials, but still had this - HELP!
    I get error hpqtra.08.exe - Uanle component not found. Then he said: this application has hurt to start because the WINSPOOL. DRV was not found. This applicvation reinstalling may solve the problem.    Any clues on what to do?

    Try to reinstall your HP Imaging software and printer drivers.

    Jim

  • Request a could not start because the configuration side by side is incorrect

    I recently bought a lenovo laptop computer and most of the applications show this message "the application failed to start because its side-by-side configuration is incorrect. Please see the application event log or see or use the command-line sxstrace.exe for details"I also tried to restore its settings to factory and is went to safe mode and tried to run one of the applciations and appeased recived this error I have read also that this error is caused by C++ I checked my programs and it had the following C++:

    Microsoft Visual C++ 2005 Redistributable 8.0.56336 version

    Microsoft Visual C++ 2005 Redistributable 8.0.59193 version

    Microsoft Visual C++ 2008 Redistributable - x 64 version: 90.330729.17

    Microsoft Visual C++ 2008 Redistributable - x 86 version: 90.330729.17

    Please can you help me solve this problem

    PS I have windows 7 home 64 bit premuium

    Thanks in advance

    Hello

    Thank you for contacting Microsoft Community.
    You may have to contact support to application for further assistance team, because we can not comment on third prerequisite software needed by applications. It is not just Microsoft Visual C++ 2005 or Microsoft Visual C++ 2008.
  • After installing the new hard drive and using recovery discs, I get this message could not start because the following file is m issing or damaged system32\drivers\pci.sys

    I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:
    Windows cannot start because missing or corrupt the system 32\drivers\pci.sys
    Then he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
    Select 'R' in the first screen to start repair.
    one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank you
    also, I can still use the old drive hard when it is installed on my laptop!
    HP pavilion dv5220us running windows xp
    I had advanced care system that had a top registry Fixer and I got ccleaner as well on the computer
    internet security Norton 2011

    Hello panjok2,

    Sometimes recovery CD are dependent on the architecture of a hard drive.  If it is different from the original disc, then we have problems.

    In this case, the best thing you could do is contact HP and see if this is the case.  If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.

    Let us know if you have any questions.

    Best regards

    Matthew_Ha

  • Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

    System:

    Toshiba Satellite A-75

    WIndows XP Home Edition
    Fully updated with Svc Pk 3
    HITACHI Travelstar hard drive 80 gig

    Nice day

    I'm getting this ' file is missing or damaged:------WINDOWS-SYSTEM32-CONFIG-SYSTEM ' error and Windows does not start in the F8 boot options. When I disable the auto reboot, I get a BSOD 51 registry error, consistent with the file "missing or corrupt" error Surprisingly "Recovery Console" works so I used to run chkdsk. This has not solved the problem, but even once, surprisingly, the utility reported no fixed error. Ok. I do research online (using another computer of course) and check out the many tips that I copy some files in my "c:\windows\repair" folder in the folder 'system '. Before I had time to do that, however, I found an article from Microsoft stating that this should not be done if you have an OEM System... what I'm doing. Apparently, hives system on these OEM installed OS set other passwords that can permanently block you on your records if you use this method. Thanks for the warning. My system restore disc is nothing more than a tool of re-insall OS that will wipe all my data in the process, and this is not desirable. Currently, I see again all my data on the drive by using the "recovery console". I'm ready to thread the needle on this one in the hope of re - access the operating system, although in some limited capacity. Any help would be greatly appreciated.

    When you run chkdsk in RC, did you use the /r switch? This is the key! In other words, this should be the command:

    Chkdsk /r

    (there is a space before the slash)

    Moreover, KB307545 can be run safely on most OEM XP installations. Of course, nothing is guaranteed 100%.

    Before you do this or else, you really must ensure all data is stored safely. One way to do this is to start on a live Linux CD and then copy the files to an external hard drive. Another way is to connect the problem hard drive into a working PC and copy the files in this way. This could be done by the servo drive or with an adapter like this:

    http://www.Newegg.com/product/product.aspx?item=N82E16812161002&TPK=N82E16812161002

  • any time, I try to open adobe photo shop elements 2.0 it says could not start because the volume windows uses for virtual memory did not enough of free space see windows help for more information

    When I try to open adobe photo shop elements 2.0 message that says: cannot start adobe because volume windows uses for virtual memory doesn't have enough free space, which could lead to stability problems see windows help for information can help you

    Hi gregoryandme,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Uninstall and reinstall the Adobe photo shop program.

    Method 2: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  • Get speech recognition error message could not start because the configuration of the language is not supported, the language must match the language of the user interface

    I am running Windows 7 Ultimate 32 bit, when I run speech recognition it fails and the following message appears,

    Voice recognition couldn't start because the configuration of the language is not supported, the language must match the language of the user interface.

    I tried to change the language, then back to British English, but the problem is still there, I'd appreciate any help with this problem

    Is there a solution to this problem yet?

  • ErrorWindows could not start because the following file is missing or damaged. Windows root\system32\hal.dll where can I find? How can I fix error?

    I turned on the PC and you have question.  I am disgusted.  Now what should I do?

    I turned on the PC and you have question.  I am disgusted.  Now what should I do?

    Please follow the instructions below. If you do not have your windows disc follow instructions on the link below to create a bootable recovery disk console and then return here and continue with these instructions.

    1. Insert the Windows XP CD in the CD-ROM drive and restart the computer. If you are prompted to press any key to boot from a cd do;

    2. when the "Welcome" screen appears, press R to start the Recovery Console;

    3. If you have a dual-boot or multiboot, select the installation that you must Access from the Recovery Console.

    4. When you are prompted, type the administrator password. If the administrator password is blank, just press ENTER;

    5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k). Let the scan to run until the end;

    6. to exit the Recovery Console and restart the computer, type exit at the command prompt and press ENTER.

    Once the scan is complete, restart your computer.  View your results.

    How to make a disc bootable windows Xp recovery console.

  • How can I fix my registry on my windows XP system? ___I get error: ___Windows could not start because the file is missing or corrupt: __\WINDOWS\system32\config\SYSTEM___I had this error of windows once today and am not sure what to do for a fix.

    I have a Dell Inspiron 5100.

    I tried searching for a solution on what to do, but am confused about what I should do or what would be the best way.

    I found this site: http://support.microsoft.com/kb/307545 and it listed a process, but was told not to use this method "If your computer has an OEM operating system . I have not installed the operating system, so I guess it's OEM.

    Listed on the page (the page of the link I gave above) it says ago guided help. What is a safe way to fix my registry XP installed OEM?

    I really don't know what to do or how to do it. Any help that could be provided would be great.

    I did some research on your problem and found the following MS link it describes your problem and how to fix your luck problem
    http://support.Microsoft.com/kb/314477

Maybe you are looking for

  • audioContext will not play until that discharge of the page

    Hi, I'm developing a Web site that uses as the main mechanism audioContext for audio playback.While the site works with chrome/safari and opera, I struggle to do audio playback smoothly in firefox on the desktop and android 26. The problem is that th

  • -error 223100 or flexible Panel

    Hello- I am baffled by this error.  See attached picture: Error-223100 to lvGetChannelIDMapping. This error is displayed when you switch Board EXE IS initially opened.  Oddly he appears ONLY when the matrix NIPXI2532 page, I mean, is that when I chan

  • Windows Media Player 'file not found '.

    Windows Vista Home Premium with Service pack 2 and countless updates. Am on my own ethernet network, access the internet with what we call now AT & T Yahoo via their DSL service.  The company with which I work stations streaming of audio files that a

  • Cannot type some letters when you try to install the program!

    I have windows vista on my laptop and I'm trying to install norton, when he asks my security code I can't type in some of the figures that it must for example E, T, N...  However, if I type them in any other program not appear!  I tried to connect an

  • How to avoid the screen of the user of the switch after the screen saver

    HP Pavilion HPE, model: h8 - 1280t, Intel i7. Win 7 Home Edition - 64 bit - nine Suite of screen saver, computer returns to the screen 'change user '.  There is only 1 user and I don't want to go to this screen since it significantly slows the recogn