Application of a policy of VSG when the vector signal generator is offline?

Similar Questions

• Bluetooth decreases when the network signal changes

  Hello guys,.

  Since the last update (23.5.A.1.291) my bluetooth devices (headphones, speakers, etc. I've tried several) are not functioning normally. Bluetooth keeps disconnecting and then reconnect. I thought it was random at first, then I thought it was when my network signal was change, for example when it goes from 4G to 3G, it disconnects (even when the network signal is also 2 bars 3).

  You have a solution, this is done on my nerves...

  Thank you

  Concerning

  I made this https://www.reddit.com/r/SonyXperia/comments/2mdmuk/getting_throw_function_to_workalternative/ and it worked.

• [FPGA] Problem with the sinusoidal signal generator

  Hello!

  At first I want to apologize for my English is not my mother tongue.

  Hardware and software I use is:

  LabVIEW 8.5

  NEITHER RIO 2.4.1

  NEITHER cRIO-9014 (controller in time real CompactRIO)

  NEITHER cRIO-9104 (chassis and FPGA)

  NEITHER 9264 (16 channels, +-10V, 16-bit voltage analogue output Module)

  I made a very simple FPGA VI: a while loop, generator of sinusoidal signal and a FPGA of e/s node in the loop. I've specified the Gnerator settings by following the path:

  Frequency = 50 Hz
  Amplitude = 1
  Phase shift = 0.00
  Size of the table look-up = 1024
  = 16-bit amplitude resolution

  FPGA clock frequency (40 MHz)

  But the wave of "sine" I got is not what I wanted to get. First of all, its amplitude is 1 V. shouldn't it be coded on 16 bits? If I wanted to get 1V I should have specified Amplitude as a 3277. In addition, 'sine' is not very detailed, it's look like "steps", as many samples vere missing. What I did wrong? I checked the samples and tutorials, I did everything the same way. A I forgot something or not has not specify other parameters?

  Thanks a lot for your help!

  OK, I solved a problem. It's embarrassing to admit, but maybe this will help someone else I blame my inexperience

  The main solution to the problem was changing calibration of calibrated RAW Mode. After that, everythoing works as expected. I had a problem with a sample because I was using a multiplier to control the generated sine wave amplitude. But... She was set to 1 in the sinusoidal signal generator. That was the reason for waveform Gradin. Please, don't laugh too much

  In any case, thank you for an answer! It is now resolved

• "ibrytdesktop.exe. the application failed to initialize properly (0xc0000135)" when the computer is turned on.

  Original title: need help please

  Ive had an application error, ibrytdesktop.exe. Note ISC, the application failed to initialize properly (0xc0000135), click ok to close the application. Can this happens whenever the computer is on how I fix

  Hi petrospapamihelakis,

  Looks like one of the installed program on the computer has been corrupted.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you get the error.

  Step 2: If he is able to start very well without any errors, and then try to try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

• FPGA: Change the sinusoidal signal generator

  The sine wave in the FPGA palette generator, that's what I need to do
  but he can't exit do 'cosine', which is outside of 90 degrees. I need 120
  degrees. To avoid discouraging, I opened the façade on the sine wave
  Express VI generator that turned into a normal sup - vi. I changed the
  a digital constant corresponding to 120 degrees out of phase, and the name was changed
  of the output pin.

  The module will not compile. First mistake was a wire that was a type of variable, the
  Fix suggested to check a box for pre-allocating did not work so I made the table
  the length constant of 1024 (that is, it is supposed to be). Following error was
  that one line of vhdl file was too long (32 k characters for a specification of length 4 k max
  characters).

  Just for grins, I put the original VI Express return with the release of cosine and
  It builds correctly.

  There was a big damper on the modification of the vi. However, I didn't know that
  simple conversion to a subvi and the tweak of a constant value would break.

  Is it possible to get an updated the express vi for this application, or advice on how
  changing the text that is there? The compilation breaks mainly online VHDL
  length associated with the range of 1024 points.

  I can roll my own generator of sinus by using some examples, not a big problem but
  It will cost you some time. Another option might be to run two generators of sinus
  and specify a different phase, but I'm not convinced that over time they
  will be exactly synchronized. Change the Express VI is a much better
  option.

  Thanks in advance,

  Bill

  I discovered the hard way that LabVIEW 2011 has no records. After reviewing various options, I settled on the FIFO. The code presented here works well, but it is not save space on the FPGA to the wire using two generators of sinus with a phase difference in hard on one of them. For now, I'll use two sine generators, if this turns out to be unworkable in practice due to the relationship of phase adrift, then I'll look at it again.

  The frequency and phase of the compensating controls are fixed point numbers formatted in zero whole bit and a 32-bit word. Bed down while the loop is synchronized with the loop timed by the FIFO, FIFO of 18 ticks timeout is two more than the 2.5 MHz in a loop which is a ditch-16. The IF block in the lower part, while the loop cut update control up to 10 KHz, 60 Hz sines more quickly.

  Great experience, thank you for the help.

  Kind regards

  Bill

  

• Problem with the biphasic signal generator

  Hello!

  I filtered signal and detected envelope with OATS envelope detection.vi of given length. And now I need to modulate signal biphasic (photo). The biphasic signal should be the same length as my envelope signal. I want to be able to change the width of peak (25us) time and period, frequency (1 kHz), the biphasic signal amplitude (1). I know that I can start with pulse pattern.vi (check my diagram). But I don't know how to put together it me give only a single period. I have LabVIEW 2013.

  

  

  You can repeat your profile of signals using a loop. Keep in the Middle the number of times where the model is repeted depends on the length of the theme of your message and the sampling frequency, you use the model and the message. Check this picture (just a quick suggestion):

  

  best,

• Problem when the PWM signal combinning and analog signal TOGETHER!

  Hello everyone,

  first I DAQmx 6212, and I need to run the water pump small (9V - 16V) that should be driven by a PWM signal; I also have a motor (5V - 13V) for a water supply which must be controlled by an analog signal and it has built in a force feedback potentiometer, I logged onto this potentiometer correction + 5V the DAQmx and used the output voltage of the third extremety as a value to diagnose to know the position of the engine.

  My VI shows:

  1 is a normal meter production to create my PWMout signal.

  2 is an analog input, I use it as a PWMin to the LabVIEW to diagnose what is happenning in my pump water through the cycle and frequency.

  3 is an entry of the third extremety of the analog potentiometer.

  4 is an analog output that I used as power supply of the motor valve and I used an AC/DC amplifier for aplify signal the DAQmx and the motor road, between the two (3. 4.) I made a comeback with a few calculations, I had a P-controller to know the real position of the engine valve.

  My problem:

  When setting to 1. and 2. in the same VI only, I get an own PWM output with no problem.

  also with 3. and 4. in the same VI only i can control the motor valve without any problem.

  but when I put all these 4 set found in the attached VI, I have a problem as the engine valve turn continuously without stopping even if I change the position of the valve between 0 and 100%, I should mention that I see a PWM normal outside a signal on my oscilloscope, another thing to delete one of (1 or 2)  and run the engine valve VI works fine without any problems.

  so this my problem, if you can think of any solution please let me know.

  Thanks in advance for your help.

  Kind regards

  Caliente

  Here's your VI, slightly modified so the two analog inputs belong to the same task.  This if only for purposes of illustration, I him have not tested.  You will still need to do some debugging.

  While changing your VI, I noticed another potential problem with your original configuration.  You have configured the two tasks of AI for the same frequency, but read you 10000 samples of one of them and only 100 samples from the other (and throw it most of it).  Data acquisition data are buffered, and if you read as fast as you acquire, the buffer fills eventually.  If you read 10,000 samples of a channel, and the other channel acquires at the same rate, then when you read from the second channel you will get old stale data or an error full buffer.

• Sound and SoundChannel question when the screen is off

  Platform: AIR 3.8 on Andorid

  Classes: SoundChannel & Sound

  Background: I am writing an application that plays the songs one after another. I'm listening to the SoundChannel instance soundComplete event. When the current song is finished, it will create a new Sound object, the sound will then load a URL and play the next song. It worked fine when the application is activated.

  Question: when the application is reduced or if the screen is off, the next song will not be played. I have to switch him back to the app or turn on the screen, then the next song will be played automatically again. I don't know if it's because the of the SoundChannel object soundComplete event will not fire when the screen is off, or if it's because the Sound object doesn't start loading when the screen is off.

  Resolved by the update to version swf SDK 3.9 and export 11.9

• How to have the filter query/dialogue opened when the report is launched in the workspace?

  Is it possible to have a default value for the report to prompt the user for a value of filter/query when the report is opened in the workspace? Currently, when a report is released, it will display data from the previous report instance.

  Not really.

  You could put a limit/filter on the query Section and then change to limit/filter Variable.

  You want to add the following code in the Scripts of the bqy

  "" "ActiveDocument.Sections ["Query"]." Process()

  where the query is the name of the Section application to deal with.

  When the file is opened, you should get the limit/filter dialog box and when the value is supplied the query will run and update the data for you

  hope this is what you need to do

  Wayne

• Digital output frequency seems to be twice the frequency generated by the basic function generator

  Hi Labview forum,

  I wrote a program (attached) Labview to generate 3 PWM, square wave, signals that has the same frequency and phase delay right (so that when a signal is off, the other signal is lit. Then the next signal). Everything seems to work fine except that the frequency of the PWM signals generated seems twice as the frequency given to the basic function generator. Anyone have any idea why this is happening? Anyhelp would be greatly appreciated.

  Thank you!

  Totally agree with the advice of all GerdW than the hardware timing of your hardware DAQ will be much more reliable.  That said, part of what you are probably hitting is a little quirk of the primitive delay msec.   Requests for 1 msec have long been particularly little reliable (although they * seem * to have improved in recent years, probably due to the better OS support in Win 7 or something).

  I did minimal mods to your code with comments from you switch to a timed loop.  My quick test showed he is good enough to hit the 1 length of loop of target msec.

  -Kevin P

• Continuity of the functions of the basic function generator and the right time

  I need to create a sine wave, point by point, which will be forwarded to the MIP and finally to a channel of analog output on a PCI-6014

  Ive tried a few different ways to do it, but everyone has some problems with her slider.

  with the 'generator.vi of the base feature.

  and also the "sine waveform.vi.

  There seems to be problems with this lack of points.

  someone helpfully pointed, its very likely windows interrupts the origin of the problem

  Here is a schematic representation of the panels front and rear

  the back panel

  

  the façade has a few points that are missing

  

  Another way to do that seems to work better known that the signal "simulate" express vi.

  It's great because it's actually a way of sine 1htz occur at 1htz.

  There are also all the points.

  The problem is that as soon as I put in my request, she grinds to stop.

  Program speed about changes 10khtz less than 1htz when the basic function generator is replaced with this express vi.

  

  A third idea or concept that has been proposed is to put a programmer to slow the timetable.

  It is once again, works fine, no more points are missed in the plot.

  Yet, he kills again the speed of execution of the program as everything can wait 1ms (or the recripocal of sampling points interval time).

  

  Someone at - it an idea on how I can get a sine wave in PID, then, in the analog waveform without a huge amount of the efficiency of the program. Im sure this is simple.

  Nevermind

  accedanta do the 2nd option from the top.

  go just to increase the number of samples for now leave the rest of the fastest of the program

• class.h file not recognized by the compiler signals section

  Hey. My class .h file is pasted below with a screenshot. The signals keyword is cyan, when I think it should be purple. Also when I mouse over the word he said Macro Expansion (protected) (even though the words of Macro are green).

  I don't think that the compiler is grateful signals: article because the signal that he is apparently not defined.

  Appreciate any help,

  Justin.

  /*
   * Count.h
   *
   *  Created on: 23/03/2015
   *      Author: Justin
   */
  
  #ifndef COUNT_H_
  #define COUNT_H_
  
  #include 
  
      class Count : public QObject
      {
          Q_OBJECT
          Q_PROPERTY(int downloadedDataSinceStart READ downloadedData WRITE setDownloadedData NOTIFY downloadChanged)
  
      public:
          Count(QObject* parent = 0);
          virtual ~Count();
  
          int downloadedData();
          void setDownloadedData(int data);
  
      signals:
  
          void downloadChanged();
  
      private:
  
          int m_data; // The data downloaded in Mb
  
      };
  
  #endif /* COUNT_H_ */
  

  Screenshot:

  

  downloadChanged() is a signal and should not be reported as a RPC function, which means that you must delete these lines (sorry for the formatting):
  {} void County: downloadChange()
  //...
  }

  If you want to run code when the downloadChange() signal is displayed, you must connect a machine slot to this signal, run the code in the slot (ie: onDownloadChanged())

  See here for more info about the signals and slots:
  http://developer.BlackBerry.com/native/documentation/Cascades/dev/signals_slots/

• How to generate a pulse with the signal generator?

  Hello

  I would like to ask if anyone knows how to use the Elvis platform to generate a regulated pulse wave?

  

  It should look roughly like the picture above. A sine wave with the regulation.

  Anyone who can answer my question please respond to my post.

  Thank you.

  You are using LabVIEW to generate the waveform or using the Soft front panels? In LabVIEW, you can use the express VI generator function and specify the Type as "Sine". Then, simply change the amplitude of the sine wave. During the actual pulse, the amplitude would be what you want (i.e. 1 V) and while the pulse is idle, set the amplitude to 0.

  

  If you use the soft front panels, you can use the Waveform Editor to create a waveform that includes a sine wave for the length of your pulse and then the values of '0' for the rest of the time. Then use this waveform in the flexible front of the arbitrary signal generator. Simply create a component of sine as the first part of the wave and then add another element to a level DC '0' for the rest.

  

• When I am inside an application and press on through one of the functions it opens app Sporting Goods of Dick. How do I unpair them?

  When I am inside an application and press on through one of the functions it opens app Sporting Goods of Dick. How do I unpair them?

  What app are you? Offer app purchases?

  Otherwise, you can remove the application

  Restart the phone

  Re install the software?

• How can I remove application Mega backup that I installed when I thought I was the update for adobe flash download. I've got El Capitan.

  How can I remove app Mega backup of my desktop computer. He got installed when I thought I was downloading an update for adobe flash.  I closed the application them tp mpved ot trash, but he would not accept it stating still open app.

  "MegaBackup" is an application of unworthy of trust-storage cloud or perhaps real malware. I have not tried to make this distinction. To remove it, please start back up all the data (not with the MegaBackup himself, of course). Then take the steps below.

  1 Select the elements of the connection tab in the users pane and groups of system preferences. Remove all elements with a name starting in 'MegaBackup '.

  2 log off or restart the computer.

  3. slide the MegaBackup application in the Applications to the trash and empty folder.

  Note that you cannot delete any application trying to drag its icon from the LaunchPad or the Dock. You must open the Applications folder in the Finder.

  You may have installed ad-injection with MegaBackup malware. If you don't see unaccustomed pop-up in a web browser, ask for additional instructions.