Application of building for presentation

Similar Questions

• Why I only get x 86 build for my application?

  Hello!

  I made this app and in the past I had arm build for it, but know when I added the key file that I generated on my PC, I get x 86 generations only and without arms. Why is this happening?

  UPDATE LOG:

  Build the newspaper - Pastebin.com

  You use a crosswalk, which generates two APKs for arm and x 86. Therefore, the result is undefined as to what APK, you will have to download.

  On the other hand, to force the issue by using a variant of the plugin that does that target architecture, as seen in this list of plugin: Plugin search - Apache Cordova

  To get an APK's ARM, I would use the cordova-plugin-crosswalk-webview-pgb-adapt-arm plugin.

• update my .ipa in DPS App Builder for the test does not work

  Hello

  I create my .ipa file in DPS App Builder for the test on my iPad, before I have to publish on the app store. No problem. I have tested and seen a few changes to make. I made the changes on my folio, updated in the generator of folio of indesign (in the cloud). Then I go back to DPS App Builder and rebuild a file .ipa from 'Manage' and 'Edit', download and test my certifates, windows seems to work ok. Then I created the new .ipa file (after deletion of the one on my desktop and iTunes) but when I sync it back on my iPad is not up-to-date. It is always the first version of my folio without changes.

  I tried to create a new application from the beginning, but the serial number unique edition no longer works. So my only solution is to update my folio, right? But what is the right way to do it? Am I missing something? I found no answer in the guide step by step on this issue.

  Or is it possible to completely delete the first version in DPS App Builder to recreate it without losing my serial number unique edition I have has not itself present Apple yet?

  I have something to do in the Folio Producer?

  Thanks for your help.

  Julien.

  Single edition series is a use of time, so change is not possible your end directly in case you want to use the same serial number. In this case, you must contact the technical support of DPS, who can get an approval on a serial number reset after reviewing the need.

  In this case, I'll take this offline with you regarding the forum post # http://forums.adobe.com/message/5597607.

• Vision Builder for Automated Inspection Development Toolkit missing / cannot install in 2012

  I try to install the VBAI SDK.  I have licenses and have installed:

  OR LabVIEW 2012 Professional Version

  Toolkit OR Vision

  OR in real time

  I find not all options in 2012 LabVIEW for the VBAI dev kit so I tried to run the install and it says:

  "The Vision Builder for Automated Inspection Development Toolkit requires LabVIEW 2011 be installed, please install LabVIEW 2011..."

  Why can I install it on LabVIEW 2012?  2012 is out for 1 year... How VBAI does not support LV 2012?

  Should I install Labview 2011 to make this work?  I don't have the DVD for 2011 so it will be a royal PITA to install.

  

  Hello

  > Why can not install it on LabVIEW 2012?

  VBAI 2012 is a LabVIEW application that was built with and require runtime LabVIEW 2011.

  The VBAI SDK, just like the run LabVIEW stage, require the same version of LabVIEW VBAI was built with.

  We could technically remove this limitation under Windows, which would have implications serious performance the performance of the custom steps, but many customers who design custom steps also want to do on targets from a distance (for example smart cameras, EVS or CVS). Currently, it is not possible to support several facilities next to LabVIEW on real-time targets. For this reason, we have decided to only support that has the version of LabVIEW VBAI.

  Please contact your sales representative OR to get a copy of LabVIEW 2011 you need for the SDK.

  The next version of the VBAI (2013), support 2012 LabVIEW for the SDK and run LabVIEW steps.

  Best regards.

• Two build for two different OS version

  Hello

  I have two different construction for two different OS version of the same application.

  It's a build for v5.0 and one for version 6.0.

  So how can I download this two builds on appworld

  can I download two builds?

  How appworld process works for different os?

  -David

  When you set your release simply add two bundles, for example MyApp50 and MyApp60. Download the file of cod for OS5.0 and speify minimum supported OS version 5.0. After that, download the 6.0 bundle and specify minimum supported OS version 6.0. And select all of the possible devices for two cod.

  App World will do the rest is the latest version that is possible for a given user, so users with 6.0 and above will receive 6.0 cod, while users with OS5.0 will receive the 5.0 file cod.

• Is it legal to use the Edition to windows 7 Home premium, System Builder for my own personal use in computer I'm building?

  Title says it all... I am doing only this one computer for me to use... I love Windows 7, do not want to move to 8, and Amazon sells only the System Builder of the present version.

  Free legal advice is worth what you pay for it.

  That said, you can read what Microsoft says about his license OEM System Builder for Windows 7 (it's different for Windows 8) and decide for yourself what you want to do.

  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/Windows-licensing-for-personal-use.aspx#fBid=slELumQEE9Z

  EDIT to add:

  Further reading:

  http://www.zdnet.com/blog/bott/what-microsoft-wont-tell-you-about-windows-7-licensing/1514 - particularly page 2, which is connected to the--> http://www.zdnet.com/blog/bott/is-it-ok-to-use-oem-windows-on-your-own-pc-don ' t-ask-microsoft/1561

• How bundle touch and non touch build for same OS version (5.0) for appworld

  Hi all

  I'm new in Appworld applications filed, please help me...

  How to package touch and non touch build for same OS version (5.0) for appworld?

  Thank you.

  Alaka

  
  

• Use PhoneGap Build for existing products updated iOS app

  I am not an expert in using PhoneGap and I have no experience with PhoneGap Build, but I have an existing iOS application that has been created/updated and with PhoneGap/Cordova (3.3.0) 2 years ago.

  There is a hypertext link in the application to an external site and this link should be updated as soon as possible. After changing the outdated link in index.html file, I would be able to download the contents of the existing www folder (update: 2 years ago) to PhoneGap Build without additional modification?

  I intend to make the most important updates to the application this month and want to know more about PhoneGap and the features available, but for now, I need to try to update the broken link soon-to-be as quickly as possible.

  Thanks for your help

  It should work - even if it is difficult to ensure that the application built on PhoneGap Build all the same exact behavior than the one originally responsible. We do not know which resembled the original developer environment. Having said that - give it a shot. You will need to include the config.xml file, and I would recommend affecting the PhoneGap 3.3.0 version for now:

  Make your small update and test your application on a device to ensure that always, it behaves as expected. Note, however, that I don't expect 3.3.0 to be supported on PhoneGap Build for much longer (see the supported versions here).

• Several bays in P410 controller for presentation to ESXi?

  All,

  I have a server HP DL180 G6 with a P410 (512 BBWC) and 8x1TB the SATA drives.

  Final objective:

  (A) to create a single RAID 5 array w/hot or RAID50 table using all the physical disks

  (B) logically divide the RAID 5 / group RAID50 sparer < volumes 2 TB for presentation to ESXi
  
  The problem I have is that I can't find a way to make B) above work with the P410 controller. When I enter the RAID level configuration of the bios that I have options to create, view, and delete logical drives. Once I have do A) above, which seems to be the end of the road and I have no way to sculpt the space free until further forward to install ESXi. I also tried to use the configuration utility of the table offline (ACU) but don't see any options/benefits to the wire by using the configuration at the bios level.
  
  As you know, does not recognize ESXi > 2 TB volumes so I need to divide up to < volumes 2 TB before taking the step of ESXi.  Once I can do that, I'll create a volume of 10 to 20 GB for ESXi and several < volumes 2 TB until the remaining free space is used.  I will then use scopes to string together them in VMware.

  One of the solutions is to create a matrix RAID 1 on disc (2) and TWO RAID 5 arrays (3) disc to use all the disks.  ESXi sees so all of the logical volumes without problem.  I would really like to find a way to make B) above work so I don't have to lose the extra parity disks.

  It is not possible with the P410, or is there something that I am missing?  Any ideas would be greatly appreciated.

  Thank you

  Paul

  Hello

  I can tell you that we do exactly this map on multiple LUNS.

  It was done with the latest firmware and started the last Smartstart CD to access the ACU.

  Create a table, select all discs, when asked for a fair size "reduce." Then click on 'create the logical matrix' to build your second. Tip Smartarray license is not necessary.

• Cannot export release build for AIR app...

  Flash Builder 4.7 won't let me export a release build for AIR applications to all the...

  All started when I wanted to make some changes to an old AIR application.  Could not even run in the debugger, so I updated the AIR SDK (using instructions available here: http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html and here: http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html )

  So after doing all this and a few other changes, I finally got my AIR application to run the debugger in Flash Builder 4.7.  The changes I wanted to make, and then tried to export Release Build...  Kept giving me an error "Incorrect password for this certificate" every time that I tried it - but she would never let me enter a password.  I went to the project. Release Build, export and on the first screen, I have to click on 'Next' and he jumped directly to the compilation, jumping on the screen where you are supposed to be able to enter the password and certificate information.

  Thought that maybe because it was an old AIR project, which was causing the problem.  So I started a new project AIR - one very simple with just a < s:Label > inside a < s:WindowedApplication >.  Project | Properties | Flash Builder package and created a brand new self-signed certificate (which seemed to work) but once again trying to export release build, he wouldn't let me get to the screen where you enter the password.  By clicking 'Next' in the first screen on project | Export Release Build jumps just directly to the compilation and (of course) it gives me the error of Incorrect password, because he never gave me a chance to enter the password.

  So what is happening here?  Why not export commercial versions for AIR projects?  It's extremely frustrating - Flash Builder 4.6 never gave me problems.  What can I do to fix the Flash Builder 4.7 so it does not work with AIR projects?

  Thank you

  L.

  Was having the same problem and totally by chance (with a mix of frustration) I went to move the window and accidentally resized it... and low and behold the rest of the content window popped up as if she had a label 'hidden' on this subject... a collueges had the same problem on a windows and mac machine and it was resolved in the same way... I hope this helps someone...

• Application not available for editing - Please HELP

  I am brand new to the APEX. I created my first application today. Then I edited the Application property sheet for "Construct state" and accidentally set it to 'Run Application' only (not ' Run and build Application "). Now, I can't change it back. It won't let me change the shape at all. Is there a way to change this property back? I lost my application?
  
  I can't run it even just? If I try within the APEX just it tells me "this application is installed but not modifiable.» Is there another way to run the application, so I can show you someone what he does at least?
  
  Help, please.

  See my edit

• y at - it application market/exercise for iphone 4

  y at - it application market/exercise for iphone 4

  FWIW, my wife has an old version of Endomondo app on his iPhone 4. I use the new version on my iPhone 5s...

• I forgot my answer to the security question, now I want to change my answer and to change their application asks me for my old answer which I forgot how can I change my answer to my security questions

  I forgot my answer to the security question, now I want to change my answer and to change their application asks me for my old answer which I forgot how can I change my answer to my security questions

  When I had the same problem, I used the solutions here If you have forgotten the answers to the security of your questions - Apple Support Apple ID

• How can I remove an application approved iPhone for children

  Is there a way to remove an application approved iPhone for children so that they can not download it again?

  Settings > general > Restrictions.

  You can stop all downloads here, or restrict this an app, but there must be on the device to hide.

• Do I need to install and configure WiFi? (I just want to use it for my iPad on any TV for presentations in mirror)

  Do I need to install and configure WiFi? (I just want to use it for my iPad on any TV for presentations in mirror)

  Yes