Application of building without distribution polymorphic VIs

Similar Questions

• Get the error 148: opening of any application.  Restart without help

  Get the error 148: opening of any application.  Restart without help

  Hello

  Please visit:- https://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html

  I hope this helps.

  Kind regards

  Vivet

• Application Builder: pin distribution to the taskbar

  Hello community,

  I have a program I am building an executable file, then an installer.

  This installer contains of course the RTE LabVIEW and other things which makes the very broad distribution.

  To distribute the patches, I use a second installer I created by making a copy of the first and then deselect the RTE, etc..

  This creates a much smaller package and voila, with the exception of a whim:

  If the executable file from the original installation is pinned to the taskbar it will stay pinned to the taskbar after patched at ONCE.

  But if I build Installer "patch" a second time immediately (even without having to build a new exe) to install this patch will cause pinning break.

  I can't understand the settings to keep intact pinning.

  Does anyone have experience with this?

  Best regards Florian

  Hi Florian.

  The problem is not directly related to the copy of the installer - this would happen if you rebuilt and then reinstalled the new version of the installer of origin as well. The problem is that version 2 of the installation program performs an action to upgrade MSI on the shortcut file that was installed in version 1.0. This action of upgrade first uninstalls the shortcut file having been pinned after installation of version 1.0, which eliminates so the pin of the Windows taskbar. Upgrade action ends then, by installing the file shortcut again. At this point, there is no pin code, because Windows is not a mechanism to associate the new version of the file with the old version of the file.

  Note that the problem does not occur when you install the first version of the copy of the installer, because in this case, the MSI upgrade code is different from the original installer, and no update MSI action (and therefore uninstalling) occurs on the shortcut file. Instead, the MSI file installs just the new shortcut file over the existing, which does not affect the pinning.

  To work around this problem, you should consider not installing the shortcut in the copy of your Installer. In this way, you can continue to rebuild the patch without losing the axis that the user does after they installed the original installer.

• Development of applications that run without installed DAQmx

  We want to develop the executables that include optional calls to connected DAQmx hardware.  It will be used for purposes of internal development and allocation of customers. We would like to include optional features such as temperature logging using the thermocouple NI 9211/USB-9162 entry-level camera.  If a customer wants to use our application with record temperature, they can buy the necessary materials of NEITHER and install DAQmx drivers.

  The problem we are trying to solve is how to develop applications that work also for the case when a client does not want to buy the material and does not install the DAQmx drivers.  Ideally, we can include a button 'disable temperature logging' on relevant applications, which prevents all calls to the DAQmx drivers at run time.  For example by including calls in a business controlled by this button structure.

  The problem we seem to have is that executables resulting always require customers to install the DAQmx drivers, even if they don't need them.  It doesn't seem to be a way to make the optional installation, since the source screw included calls to DAQmx drivers, even if they will not be used by the customer.

  Clearly, a solution is to develop two families of screws and the applications, which include DAQmx calls and one who is not.  However, which will result in a horrible collection of code that will require the maintenance and parallel development.

  An alternative is to ask all customers to install DAQmx drivers.  Unfortunately, the size and complexity of downloads that results will be a significant deterrant.  It's already a shame that our distributed software is a 50 MB download, when the size of the code in C++ or VB would be less than a tenth of that.  Another factor of increase of 10 download is prohibitive.

  We must find a solution more clean.  All ideas, plase?

  We are currently with LabVIEW 8.5.1 and DAQmx 8.9.

  You can use the conditional structure conditional symbols and disable disable in the project to do. You can, for example, have a symbol called "HAVEDAQMX" and, say, use a 1 or 0 (or anything you want) to indicate that you want to run the project with or without DAQmx. In VI using the conditional turn off the structure. For HAVEDAQMX = 0 case put in the code to run without DAQmx. For HAVEDAQMX = 1 case put in the DAQmx code. When you build the application, if any will get used, and the other will be thrown.

  Attached is a simple project that does this. You can view the LabVIEW help for more information about the conditional structure disable.

• How to change Qt creator to build without - devmode - bar debugtoken?

  I'm trying to deploy Qt applications that I have updated to work with the last update of OS as well as the creator of Qt bb published here: https://github.com/blackberry/Qt/downloads

  I run the installation of linux.

  The release/debug switch does not work to remove the devmode-blackberry-nativepackager call debugtoken.

  So I thought no problem, I'll build and sign the order, here are the issues I have with that.

  First of all, Packager complained the matter in the descriptor indicating that % QT_INSTALL_IMPORTS % is an invalid path. Then I put in the required absolute paths and managed to build the package bar.

  Bar-signer will not sign the package, well complain:

  Error: Code signing request failed because [run_native] in Entry-Point-User-Actions is not allowed.
  

  So I remed out: run_native starting from the descriptor, still no joy, it will fail with the same message...

  Does anyone have any idea how to change the call to blackberry-nativepackage of the creator? Or any other tips as to where I'm wrong here?

  I could be missing something obvious here in my frustration!

  Thank you

  Jon

  I * think * this message is what you get if you have a run_native, without the system = 'true' part. If I'm right, he can point to that you have a duplicated elsewhere with the wrong content descriptor file, and it's using this rather than the one you are changing. Or something like that.

  To resolve these issues, always go to the MANIFEST. MF file in the actual .bar file. Unpack and inspect this file directly to see what it is * really * for help. Often, you can identify a gap like that and then trace back to repair your build system.

  Oh, and I must be close to correct that since, if you really had system = true, that entry would have shown upward in Entry-Point-system-action at the place where the error says it's. (Unless the error itself is completely wrong).

• Application of building for presentation

  Hello

  Can someone guide me to step on the way to package the application for presentation? I created the run configuration that unfolds to the Simulator? Currently, it generates a folder bar in my bin-debug folder and also when I see the application on the Simulator, the title a - debug next to her.

  Can someone please provide the link on how to build for immediate release?

  Thank you.

  CA

  Hey choudhary,.

  I know it can be frustrating - adobe does not have the playbook the platform easier to work with. Here are the screenshots and steps you need to take to export your project.

  Summary:

  1. Go to project > Export release build
  2. UNCHECK the option to deploy one application on other equipment connected
  3. Press Next
  4. On the next screen press Finish

  1. go in project > Export Release version:

  

  2. click on deploy an application for connected devices:

  

  3. press Next.

  4. press Finish:

  

  After you have finished your final .bar file will be in the folder your project root. For example, the name of my project is "NavBarTest" and it would be in the NavBarTest folder and not in the bin-debug folder.

  You can now submit bar to go to the world app for approval.

  In a small Note If you want to confirm that it worked and there is no - debug on behalf of the application do the following:

  I'm on a mac if you use windows commands will be slightly different. Also, be sure that you are in the root directory of your project. Mine is /NavBarTest (you will see your package .bar here).

  Run this command by replacing the text in bold with your own parameters and names:

  "/Applications/Adobe Flash Builder Burrito/sdks/blackberry-tablet-sdk-0.9.1/bin/"blackberry-deploy -installApp -package NavBarTest.bar -device 172.16.176.130
  

  It will look something like this when you run:

  

  After having done so go to your Simulator and look for your application. If it is not appear, switch to the 'Internet' tab, and then switch to the tab 'all' and it will show. Click your applicatoin and it will open without problem:

  

  After doing all that you should be insured everythng went according to the plan and submit your application without worries.

  Note that all my screen shots must be approved before you can see them so give it some time and the screenshots displayed. I hope this helps and good luck with your bid!

• Access to the applications of Builder Websheets

  Hello

  I want to give the developer role to one of our users, so it can develop a specific websheet of applications

  Problem is this setting a user as a developer still requires access to or another builder or sql application workshop

  I wouldn't give any of that, because they could access the application builder page and remove applications without any problem

  In the Web application sheet there is a button Builder, is possible to hide it somehow?

  I don't see any possibility to do, I tried with the chrome, definition of the element plugin: visibility: hidden and it works, only problem, is that I have no idea where to add this attribute to make it permanent

  Thank you!

  Hello

  To allow a developer to 'create' applications they need the privilege of Application Builder.

  I'm no expert with Websheets, but I'm sure that all 'development' is from the front-end of the application, so the user does not require access to the APEX server.

  If you have two options:

  (1) you will need configure a new application Websheet to this person whenever they need to reapply; OR

  (2) create a new area of work/drawing away applications, you don't want him to have access to and they have access to full development.

  Amanda.

• App Builder and Distribution certificate. Error of P12

  We have a Pro account. I'm building a single application Editon using v25, running OSX 10.8.3 and CS6. Attached is my screenshot App Builder error. (v2.6)

  

  The Distribution. P12 certificate is valid (green light) Apple Developer Portal (see attachment).

  

  I also tried to remove and rebuild the certificate and still get the same error, but in each case the "validity date time" Exchange.

  In the Apple Developer Portal, I don't see where I can edit or change this date of validy.

  Help!

  Thanks in advance, Tom

  See:

  http://forums.Adobe.com/message/5374736#5374736

• How to develop and test the application mobile flex without the real device?

  I'm trying to read some information about it, but decided to ask also here.

  I have a project that has a company wants to grow me, it's for iPad. That's ok I am with Flex and the framework for web development, but not for mobile. Why? Because I have no idea how to test my application. I know generation ago it sort of the desktop version of the application with the change of the "back" button on the orientation stuff, but how do I know my application will look and work exactly the same (I mean NOT performance here). I mean you know how every android or iOS device have their native keyboard or native video player for example and I have only in the debug version of the application.

  The question is how to develop this application based on the desktop emulator or anything and then hope that my app looks and works on a device, as it should... Of course I can't afford to buy all the devices it is just to be able to test on it if necessary? So, how do you, how to test how my iPad app works on a device without a? I know I should get a licence from iOS dev to be able to package the app for iOS, but it's $ 99 per year or something like that I can handle, but how to test my application without having to buy the darn device? Are there any emulator for iPad or something like that I know what my customers will see when they get the application? One of my friends told me that the mac os x use the developers a tool - cause some kit of dev who has emulators for all iOS devices and you can build and test there immediately and that you can simulate virtually any combination of key for example, and he said he's working and seems to 1:1 as the real device but he didn't know if can I export an AIR application and try it like this, he only knew for app written in native code.

  If someone can just tell me how should I do this? Should I buy a mac os x computer laptop to test because I am a user of windows 7, or perhaps create a mac os x virtual machine and tests out there or maybe the only option is to actually buy the device... that would be terrible for a freelancer...

  I hope someone can save the day here! Thank you.

  F

  Since the AIR for iOS applications are compiled to ARM code you will not be able to run on iOS emulators running on Mac OSX.

  You can do a very simple test with the "Simulator" built into Flash Builder, but it is not much more than a window to AIR with a window size that matches the resolution of the selected iOS device.  When running in the simulator of the application is not compiled to ARM code so it will take a completely different code path than what will be the final release of iOS.

  Ultimately if you are developing for iOS with AIR nothing but for tests on real iOS devices.

• Why can't I open Firefox browser application after close without re-booting CPU? Windows XP sp3

  Error message lights up indicating that the browser is already running and I have to restart the computer to start a new session.

  This happens after I already had open browser, but it closed by pressing the 'X' in the upper right window.

  Cannot re - open the application without re - start.

  See "hang out":

  • http://KB.mozillazine.org/Firefox_hangs
  • https://support.Mozilla.com/kb/Firefox+hangs

• VI building for distribution

  In my project, I included several screws and successfully built.

  But when I change one of the screw and then re - build the project, the following error occurs. Can anyone help?

  The error indicates error 8: the file permission error.

  It seems to me that the target file (obviously the pqtlvanlys.dll) is write protected. I see both realistic cases:

  (a) you write protected by the settings in the file (see file for this windows Explorer)

  (b) you use the target file already by some applications.

  hope this helps,

  Norbert

• What is a version of the application validates / build ID?

  I am trying to package an application blackberry with cordova.  The default version in the config.xml file is "0.0.1".  Packing with the help of that version works fine.  However, we strive to include the number of our internal system of versioning as the revision number, so I changed the version in the file config.xml for "1.1.0300060."  When I do that, I get the following error:

  [ERROR]   Error: Please enter a valid application version

  I then tried to pass on the command line with the parameter - buildId, who throws another (although probably the same root cause) error:

  [ERROR]   Not a version identifier is valid: 1.1.0300060

  [ERROR]   Native package exception occurred

  Can anyone explain it please to me is what a BB version number valid and what are my restrictions and limits?  Thank you.

  The accepted format is X.X.X or X.X.X.X as shown here:
  https://developer.BlackBerry.com/HTML5/documentation/beta/widget_element.html

  Each component of X (with the exception of the last one; that is the Build ID) can be between 0 and 999.

  The ID to build, being the last X component in each example, must be between 0 and 32767. You can read about the meaning of this value here:
  http://en.Wikipedia.org/wiki/Integer _ (computer_science)

  Each component must also be a valid number; cannot start with 0.

  EDIT: Therefore, the largest possible version with which you can build is:

  999.999.999.32767

• custom action builds without error

  All,

  I am trying to create a custom action where it administers all events/alarms to another server for processing.  First, create a rule that implements the custom action, where the action is supposed to be triggered on every event/alarm.  The custom action will then take the event and move on to another server via a raw socket and made a simple handshake with sha1 base 64.  I welcomed for groovy and java during the construction of the custom action and it builds just fine without error.  However, when I install cartridge and turn on the rule, the server receives nothing and I do not see the log entries.

  Build.XML I had to ad a taskdef to groovyc and add a different path to the jar file.  I enclose my Ant and source files.  Any help to find where I'm wrong well would be apprieciated.  I think that the problem is around the keyword implents and how I created that, but I'm not sure.

  Thanks for any help!

  Can you please post screenshots of this rule?

  There is a rule of Foglight making snmp with impatience that sends snmp traps to another http://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/w/admins-wiki/5567.event-driven-rules-snmp-forwardserver.  I don't know how your rule is constructed, but the simplest can be copy that snmp before rule, rename it simply to put your action and see if it works. At least the starting point will be a tested rule that works in several sites.

  Golan

• Speach.dll results in the c# application and other TTS applications to exit without error

  Hello

  I'm looking to use the speach.dll within a c# application and noticed that it is causing the app exit without any exceptions, no newspaper, no error or anything.

  Copy the following code will cause the failure:

  using System.Speech.Synthesis;
  
          SpeechSynthesizer speaker = new SpeechSynthesizer();
  
          try
          {
              speaker.SetOutputToDefaultAudioDevice();
              speaker.SpeakAsync("Some text"); // <<< this causes the app to crash
          }
          catch (Exception ex)
          {
              Debug.WriteLine(ex.Message);
          }
  

  The library of Microsoft.Speech.Synthesis works well. I also noticed that the Narrator fails to launch, just like all the other apps TTS.

  Does anyone else have this problem or a solution?

  Thank you

  Win7 32 bit

  Hi parenese,

  You can get help on this issue in the MSDN forums.

• How can I disable features of the Android device in my application to build PhoneGap?

  Hi, I have implemented a simple application in Cordoba and downloaded the Phonegap Build project.  The application compiled with success and I am able to use the QR code to download the application and install it on an android device, but the installation identifies that the app should have access to details of private life and the device features that my application does not need.  In short, it looks like the app to request access to EVERYTHING by default, including the camera, audio, GPS, contacts, device files, user accounts, control vibration, audio settings, etc.  My hope is to disable all unnecessary items, which is probably about all that in the case of my application.

  Looking through the PhoneGap Build documentation (to PhoneGap Build Documentation), it seems that I should be able to disable all the features by adding the following to the file config.xml of my project:

  < = "permissions" option name value = "none" / >

  I did it, but this does not change the application's permissions request access to when it is installed.  He always requests access to a long list of unnecessary features.

  What should I do to remove these permissions of my project?

  dans8649804 Sometimes, you need to remove the original installation to reset permissions.