Application of monitor Dell DDM with U2515H and U2412M dual screen setup and USB drive menu

Similar Questions

• (Redirected) Cannot boot from the HARD drive on dell n5010 with SSD and HARD drive installed

  I have my old dell n5010 (15R Inspiron) with SSD (Samsung EVO 840 120 G) installed on the main drive Bay and the HDD (Samsung HJJ 500 G) on the optical drive Bay.

  It is a typical way to add an SSD on such an old laptop (bought from dell.com.cn in 2011).

  My Windows 10 operating system has been installed on the SSD using Samsung Data Migration software, so the previous C drive was pointless. So I formatted and installed an operating system Ubuntu 14.04 on it, hoping the grub OSs double beginning located on the HARD disk.

  However, I find no the Dell bios boot option to boot from the HARD drive installed in my optical drive Bay. All the choices are 'Hard Drive', 'Network' and 'Diagnostic '.

  But I was definitely sure that my bios program has detected the SSD and HDD with information on the main menu of the bios.

  And the LED on the optical drive Bay was immediately once I pressed the Start button on my laptop.

  As a general rule, all things were right except for options of the bios boot.

  Is there a way I can boot from HDD (with installed Ubuntu) while remaining has my SSD on the main drive Bay? I don't want to swap their positions, because the SSD is super fast on the main drive Bay.

  I have alse won't migrate 10 Windows to the HARD drive and reinstall Ubuntu on the SSD, because I'd like my windows be loaded quickly.

  Someone at - it the same problem with me?

  Any suggestion is appreciated!

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Reinstall the USB controllers and USB drives

  Some flash drives did not work properly. So I uninstalled my USB controllers and USB drives from Device Manager. When I tried to reinstall, the Add Hardware Wizard cannot find the drivers, now none of my USB ports work. Help, please...

  Hi Paul,.

  Please run the patch from this link and see if that helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems/en-us?EntryPoint=lightbox

  For additional help, see:

  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

  If none of the suggestions above, you may need to reinstall your chipset drivers to fix the problem. Please visit the section of your chipset manufacturer support or your computer manufacturer's Web site for drivers.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• New HP Envy 700xt, put in place to help monitor Dell HD with VGA connector, no video

  Hello

  I've just set up our new HP Envy 700xt with a monitor Dell HD (VGA cable).  I get no video.  Any ideas?

  Thank you

  I thought about it.  I had to use a VGA-DVI converter on a different port.  Thank you.

• I have a dell xps with vista and get the error "unable to start windows.

  I can then choose the launch startup repair or start windows normally.  as soon as I clicked launch startup repair, he says that it is not able to PC repair.  I tried to enter safe mode, it restarts, flashes a blue screen and takes me to start the reboot system again.  I tried to run a recovery from a previous version of my sw windows (via the options in advance in the Startup Repair menu), but this does not solve the problem of boot loop.  I can get to a c prompt, but that's all.  I prefer not to use the dell factory image restore and losing all my files.

  today

  Run dell diagnostics

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_A9E3A15597A04AFBB02EE16785D39C5C&isLegacy=true

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

• Problems with QE65000 and optical driver Océna spectrometer

  Hi, a few months ago, I installed the driver to use the spectrometers of USB4000, HR4000 and QE65000 with LabVIEW 2010 with Windows 7 - x 64. Recently, I measured the spectrum of the Source of Calibration HG - 1 Mercury Argon with the help of software SpectraSuite and a LabVIEW program QE65000 spectrometer ("optical ocean 2000 4000 acquire continuous Waveform.vi, example of library, Fig1"). When I got the two spectra, I observed that there is a shift to the infrared region of the spectrum with LabVIEW program. Acquired calibration coefficients are consistent with "wavelength calibration data" that comes with the spectrometer (Fig2). So, I would like to know if there are problems with the example of the library program or what is the problem?. Attached to this message I send image of obtained spectra.

  The black figure is the spectrum obtained with the example LabVIEW program, including the ocean optical library. The red graph is the spectrum obtained with SpectraSuite and coinciding with the real spectrum of the HG-1 lamp.

  Best regards, Diego

  Version 1.3.2 should be alive in a few hours and this latest version is implementing the changes suggested above.  Did someone mind try these out and let us know how it goes?

  2000 4000 optical ocean pilot Page

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=7833BD4A31DA1274E04400144FB7D2...

• Problems pictures copies of Flash memory card and USB drive under Vista 64 files

  Hi, when I insert a flash memory card (SanDisk 8 GB SDHC or SanDisk 2 GB Compact Flash) either by inserting the card into a card reader, AutoPlay comes on but the image transfer stops after a few images have been copied to any program (Windows, Picasa, etc.). I chose to copy the files. Same experience when I connect the camera with the memory card in the camera using the USB cable to the PC. I tried to re - format camera memory cards, but it has no effect.
  Also, I feel the same when I try to copy from a USB flash drive (the drive is basic, not a U3 key).
  I have a HP Pavilion m9400t Elite desktop running Vista Home Premium 64-bit. I own this desktop computer for a year and I've always had this problem. I have no problem using these flash memory cards and a USB drive on my old XP PC or an Apple Mac Book. For what I can tell, my Vista desktop is set for automatic windows and updates from HP. Everything about the plan of updating drivers, etc., which would solve this problem would be appreciated.
  Thank you
  Srini

  Hi Srini,

  one) that you get specific error messages when images are arrested to copy?

  (b) what is the file format of the pictures\files that are not copied? What images are copied with success?

  To narrow the problem, please follow the steps mentioned below:

  O copy the pictures manually on the flash memory card Office.

  O connect the flash memory card\ camera to the back of the computer (for a different USB (port universal serial bus) and try to copy the pictures\files.)

  O check if the photos are in double version:

  Windows detects your newest pictures and doesn't matter the duplicate versions of the old photos that you've already copied to your computer

   

  He may want to know:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• driver of scanner/update for Sony VPCM11M1E/B and USB driver updates for a computer laptop Packard Easynote TS

  I get a scanner driver that pop up in the corner of my screen Sony I can't remove it by deleting using the control/alt someone advise or help please.

  Also, I get a message on my laptop HP Easynote TS my Bus driver series universal needs to renewal/update, the driver seems to have disappeared?
  Thank you
  Silent pensioner

  Hi Ian,

  I appreciate the efforts that you put to publish the query on this forum.

  Please help me with the following information about the issue:

  (1) you receive the notification/pop up in the taskbar?

  (2) when you receive these pop-ups? This is when using the device?

  (3) do you find problems when you use the scanner device or USB on laptop computer Sony or HP Easynote laptop devices respectively?

  (4) have you tried to install updates of the notification?

  (5) where have you checked the status of the driver for the USB controllers? Is it under Device Manager? +

  I suggest you to check the status of the driver for the device in Device Manager. Check out the link to do so:

  http://Windows.Microsoft.com/en-in/Windows7/open-Device-Manager

  This could be related to updates driver from the manufacturer, on their respective Web sites.

  I suggest you to try updating the driver for the scanner and USB controllers and check if it helps.

  You can visit the following links to download and then install the required drivers:

  Sony Web site:

  http://www.Sony.co.UK/support/en/product/VPCM11M1E_B/updates

  Packard Easynote story:

  http://www.PackardBell.co.UK/PB/en/GB/content/download

  After installing the drivers, check if you get the same notification.

  Please let us know about the results. We will be happy to help you.

• a6720y with Win 7 hangs during intensive use of USB drive

  We have a fairly new HP a6720y office, which we upgraded to Windows 7, 64-bit Home Premium edition.

  Small additional hardware - an old mouse MX Duo wireless and keyboard from Logitech, which do not seem to cause us problems and regular use of the iPod connected USB and other drives, including a 1.5 TB of Seagate drive (free Agent). We do not use the wireless LAN (which many others have identified as a source of problems) we have a wired connection.

  We have three problems since the installation of Windows 7 (the commercially available version), but I'm only raising the first two here for completeness.  1. the incompatibility between Windows 7 and our antivirus, Symantec confidence online Symantec SEP 11.0.4202.75, giving regularly pop up on the utility driver warning messages.  Apparently, Symantec has fixed this with the version 11.0.5 I have the MS program by my employer and am not sure I can get the latest version up to about 6 months from now, so I'm probably in the market for a new non-Symantec Antivirus program.  2. often very high CPU usage, close to 90%.  When he gets here, the only solution is to turn off and restart.  "System interrupted" is identified as the pork.  This problem may be related to the #1 problem because I think that periods of high CPU usage follow the messages on the incompatible driver for Symantec.  However, others who have raised problems similar to #3 here also have high CPU utilization.

  3. that's the problem, that I wonder about here.  We get a blue screen of death crash, in very specific circumstances - when copying a large number of files (at least a few GB) HDD on the 1.5 TB USB connected hard drive.  The BSOD screen identifies STOP 0 x 00000116 and nvlddmkm.sys (apparently the driver for the onboard nVidia chipset) of this behavior, I suspect the problems between Windows 7 and the motherboard, especially its USB ports.  I tried to download the Windows hotfix identified in another thread, that sounded useful:

  http://support.Microsoft.com/kb/976972

  but he could not install, I was told I don't have the right hardware (I think I do).  In any case, I think looking for another driver Nvidia, get a replacement graphics card, do something on the WLAN, running chkdisk on drive C (I have on the 1.5 to drive), other things, but any ideas or advice are appreciated.  Thank you.

  I should have been a little clearer...

  After clicking on the EULA, you will see this.

  Show software fixes for all platforms and languages (2)

  Click on it and choose the correct version of the operating system that you are running

• Documents on the hard drive and USB drives are automatically sent to the trash

  Why are some of my documents (files) on my hard drive and external drive is sent to the trash without my consent.  Is there a virus in my Mac the cause? If so, how to solve this problem?  Only selective files are sent to the trash for deletion after a reboot.  It seems that my computer has been taken to target.

  Mac Book Pro (to 2011)

  OS X EL Capitan to. 10.11.3

  8 GB memory

  Thank you

  DJE B

  How many times do you get? What are the documents?

• Problem with my monitor Dell 24 "with my T42

  
  
  

• T430s is not awaken from its slumber with mouse and USB keyboard Logitech wireless

  Hello

  My T430s is hooked up with a monitor and a keyboard/mouse (Logitech LX710) wireless.

  I put the laptop itself under my desk since I did not take it with me that often.

  Now, when I hit the sleep button on my keyboard, the computer goes to sleep, as expected.

  -There is no way (it seems) that I am able to wake up.

  I am running Windows 7 (x 64).

  I tried different USB ports (to make sure I use a motor) for Logitech wireless USB adapter.

  In the BIOS Setup, I checked to see if the USB ports can wake the computer from sleep mode.

  In the devices tab Manager keyboard (and mouse), power management, I enabled "allow this device to wake the computer". I did the same thing for the "Human Interface devices".

  "Update driver software" for the keyboard and the mouse says I have the latest drivers to install.

  In power controls of Lenovo, under Advanced settings, USB settings, I tried the USB selective suspend allowed many people with reduced mobility. They are disabled for the moment. Under global settings of power, I enabled 'always on USB"and"even when the computer is turned off.

  Then... I'm slowly running out of options. So for now, I can leave the computer at any time (it's what I do, with an occasional reboot - that seems not so respectful), or I can crawl under my desk in the morning, take the laptop on the little stool that I put there, make attention to diet, USB and cables monitor and external hard drives, open the laptop , press the power button, close it again and carefully put it back. What is bulky.

  So... what someone has ideas on how to fix this and leave my wireless keyboard to wake the portable computer?

  (Oh.. and of course buy a wired keyboard is an option, but not one I prefer...)

  I only have the mouse, but I have a T430s and a Microsoft wireless mouse to wake it. I always use the blue (USB3) port on the left side for all functions related to the startup, because I learned that the always active port (on the back) is started later in the process of turning the power on. Use the right-click button to wake it up, which is the function that was originally defined as one to this end, even though I believe that this movement of the mouse as she wakes up on a wired mouse.

• How can I improve the rate of acquisition with daqmx and usb-6008?

  Hello

  I am trying to acquire data of analog voltage with a USB-6008. I'm under Labview 8.5 student on an HP laptop with a 1.33 Ghz cpu and 736MB RAM, apparently. I tried using the Daq assistant and the low-level Daqmx functions. My best results come with a task set in MAX for my analog input, and using the function 'Daqmx read' the 'unique double 1 d sample' value in a while loop. I insert the values returned in a table which built in the while loop, and then when I'm done, I check the number of samples in the table. In the test VI attached, I also use the time to Get before and after all loop. The best sampling rate I made using this method, is around 40samples/second. I have attached a VI below that illustrates this concept. In my actual application, the data acquisition code runs at a time while loop with 1ms, parallel to other code that controls the device I'm collecting data of. The sampling rate is roughly the same for my test below VI and my application program.

  The 6008 datasheet gives the sampling frequency maximum 10 kHz. I'd be happy with 2 to 2.5 kHz, or as soon as possible; I'm sure that I can achieve a little more than 40 Hz. My first idea was tied to the hardware, but the 6008 cannot make acquisitions NI hardware.

  My question is: How can I implement a faster sampling of analog voltages to a USB-6008 in LAbview? If I can't do it, is there another way I can taste the data more quickly?

  Thank you

  -SK-

  

  To the best of my knowledge, the USB-6008 can do timed equipment acquisition. Don't forget that this is a multiplexed device, so if you add 8 channels so the maximum you can set is 10 k/8

  If you are new to LabVIEW, I suggest that you try this sample program first

  \examples\DAQmx\Analog In\Measure voltage. llb\Acq & Graph tension-Int Clk.vi

  Amit

• NAS work with FCPX and external drives?

  I use a Mac Pro 2013, 3.7 Ghz Quad Core, 16 mHz Ram with 512 GB of internal storage, AMD over-pants D500. My employer also purchased a Synology DS415 + as my storage with 12 TB of HARD drive space.

  Now, I try to install FCPX and Motion 5 as my zero external because the machine has only 512 GB internal. But the problems lies in that the Synology's NAS still FCPX he sees not as my drive to zero. The NAS is connected to the network and I can access it via the NAS software but it does not appear on my desktop as an external drive even if I directly connected via USB 3.0 (A - A). I read on the website that if I connect it to the Mac via USB 3.0, it will appear as an external drive on my desk, but that does not happen. USB port on both units are USB - A (male?)

  And so my question: someone has their 2013 Pro Mac connected to a NAS for mounting on FCPX? And how do I set up mine to do what I hope? I searched the web HI & lo, nothing helped, and I have a feeling that I won't like the answer.

  Thank you in advance. Any help will be greatly appreciated.

  External drives no longer appear on the default desktop.

  Finder > Preferences, select the option to display on the desktop under the general tab.

  I do not know if that will solve your problem in FCP X, but it could explain why he is not on the desktop.

  I think that FCPX will be unhappy if you try to use a disk on the network, he really needs a fast connection, USB3 should work, but I think that ethernet can be slow because it is a shared environment.

• Satellite U840W - how it works with SSD and HDD drives?

  American,

  I have a U840W which is a beautiful piece of work. He currently heads the Win7.
  It has a hybrid drive system, SSD 32 G and 500G HARD drive. Apparently the 32G acts as a cache.

  I tried to install Linux Mint as a dual boot with Win7.

  Cannot make it work. The installation process (Ubiquity) does not see disks or partitions.
  In a file manager or the GPart-partition manager, I see the HARD drive and all partitions.

  Help me to help the developers of the ubiquity of the problem of access to disks I can get a
  explanation of the way in which the disk system is organized and how it works?

  Any help greatly appreciated, Ian.

  The LINUX community already knows your answer and has led the path to resolve, such as the forum of mint as this thread:

  http://forums.linuxmint.com/viewtopic.php?f=46&t=124299

  Even Microsoft Windows has trouble with setup.exe on disc SSD/HDD hybrid and the Microsoft forums are polluted with their own unverified solutions, some of which are frighteningly superstitious that authoritative to be listed here.

  Ubi, Gnome and KDE are all based on the ability of Grub reliable start the player and so many different distributions don't guarantee reliability.

  I don't have the problem you describe with hybrid hard drives since the installation of 11 Unbuntu.

  Mint is not my first choice with the exception of a bureau of temporary replacement, since the authors are strongly focused on the Office UI, less than the largest army of coders behind Unbuntu and Fedora.

  I'm not criticizing the currency of your choice, but comparing the current Unbuntu boot process could shorten your objective dissection of a startup process of OEM from a manufacturer known for securing lower level specifications.